Re: [time-nuts] KS24019 units PSU requirements
I have the same pair. At 24 volts, they draw a total of about 2 amps at turn-on (both units, total). After they’ve warmed up it drops to a steady 1.1 amps. I bought a Meanwell LRS-100-24 which is capable of 4.5 amps. Very small, runs cool and cost about $25. Rodger > On Jun 21, 2017, at 9:44 AM, David C. Partridge > wrote: > > I have a pair of L108 (RFTGm-II-Rb) and L109 (RFTGM-II-XO). > > What current do these bad boys draw so I don't get too skinny a 24V PSU? > > Thanks > Dave > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] KS24019 units PSU requirements
Thanks, I ordered a 24V 120W power brick from eBay. Dave -Original Message- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Mark Sims Sent: 21 June 2017 16:19 To: time-nuts@febo.com Subject: [time-nuts] KS24019 units PSU requirements I have not measured mine, but I saw a spec of 2A max for each side mentioned somewhere (would drop considerably after warmup). I am using a 24V 100W supply that came with my Z3811/Z3812 Lucent boxes. It was already wired up with the proper connectors for the boxes. -- > I have a pair of L108 (RFTGm-II-Rb) and L109 (RFTGM-II-XO). What current do these bad boys draw so I don't get too skinny a 24V PSU? ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] KS24019 units PSU requirements
I have not measured mine, but I saw a spec of 2A max for each side mentioned somewhere (would drop considerably after warmup). I am using a 24V 100W supply that came with my Z3811/Z3812 Lucent boxes. It was already wired up with the proper connectors for the boxes. -- > I have a pair of L108 (RFTGm-II-Rb) and L109 (RFTGM-II-XO). What current do these bad boys draw so I don't get too skinny a 24V PSU? ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] KS24019 units PSU requirements
I have a pair of L108 (RFTGm-II-Rb) and L109 (RFTGM-II-XO). What current do these bad boys draw so I don't get too skinny a 24V PSU? Thanks Dave ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.