HI
Ok, that’s very cool
If you can hit all the SCPI stuff *and* the PPS on the one connector, there is
no need to wire to the DIAG port at all.
Thanks!
Bob
On Nov 17, 2014, at 11:55 AM, Götz Romahn go...@g-romahn.de wrote:
read this on:
http://www.realhamradio.com/gps-satstat-software.htm
When you first turn on the Z3816A GPS receiver, it is always continuously
sending time. There are two commands you need to use: one to put it into the
SCPI command mode, the other to switch it back to sending time. The two
commands are:
To go to the SCPI mode:
ptim:tcod:cont 0
To go to the continuous time mode:
ptim:tcod:cont 1
this holds true also on the J6 (RS422/1PPS) connector of the Lucent KS-24361
Z3811 and maybe Z3812 ( watchout there is no !! echo if you are using a
terminal software but Z3811.exe works fine).
cheers Götz
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.