Re: [time-nuts] TymServe TS2100 dead power supply
This might be of interest. I don't know any more about it than is stated at the site below: https://www.greenlake-eng.com/it/products/time-products/gle-tcsw/ Philip -- Forwarded message -- From: Bob Martin Date: Wed, Mar 7, 2018 at 2:34 PM Subject: Re: [time-nuts] TymServe TS2100 dead power supply To: time-nuts@febo.com RANDOM QUESTION -- does anybody know of software to *generate* IRIG time code? Something in C that's adaptable to a modern micro would be good. In something like a Raspberry Pi 3, IRIG generation would make a nice addition to Lady Heather... cheers and 73, Bob K6RTM ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/ <https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TymServe TS2100 dead power supply
Hi, On 03/07/2018 09:05 PM, Mark Sims wrote: > I once looked into adding IRIG generation to Lady Heather. I never came up > with a reliable / robust way to do it. It could possibly be done with some > of the Windows multi-media support, but that would leave the > Linux/macOS/FreeBSD people in the dark. > > I just added TS2100 support to Lady Heather... but it only reads the time > code output string and drives the clock displays. I don't have a TS2100 to > properly test it, but it works when fed with a simulation file. Well, I have an unfinished IRIG-B project here: https://github.com/sa0mad/irigb I have run that decoder in realtime from a Brandywine GPS4 IRIG-B output on my Linux laptop. Cheers, Magnus ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TymServe TS2100 dead power supply
k6...@comcast.net said: > RANDOM QUESTION -- does anybody know of software to *generate* IRIG time > code? Something in C that's adaptable to a modern micro would be good. In > something like a Raspberry Pi 3, IRIG generation would make a nice addition > to Lady Heather... Look at util/tg.c or util/tg2.c in the ntp package. Download here: http://support.ntp.org/bin/view/Main/SoftwareDownloads -- These are my opinions. I hate spam. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TymServe TS2100 dead power supply
I have built an irig b encoder. Irig uses a 1 KHZ amplitude modulated signal. I can't remember now if it was pulse width modulation also. But it used a small processor and todays arduino is many time more effective at the job. That said I used a modulator using a small xtal controlled divider to produce the carrier. It was a Epson chip and even the xtal was built in and a analog CMOS gate as the modulator. Its actually fairly simple to create. Then it was a case of reading out the clock in the correct format. Regards Paul. WB8TSL On Wed, Mar 7, 2018 at 3:05 PM, Mark Sims wrote: > I once looked into adding IRIG generation to Lady Heather. I never came > up with a reliable / robust way to do it. It could possibly be done with > some of the Windows multi-media support, but that would leave the > Linux/macOS/FreeBSD people in the dark. > > I just added TS2100 support to Lady Heather... but it only reads the time > code output string and drives the clock displays. I don't have a TS2100 > to properly test it, but it works when fed with a simulation file. > > > > > RANDOM QUESTION -- does anybody know of software to *generate* IRIG time > code? Something in C that's adaptable to a modern micro would be good. In > something like a Raspberry Pi 3, IRIG generation would make a nice addition > to Lady Heather... > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] TymServe TS2100 dead power supply
I once looked into adding IRIG generation to Lady Heather. I never came up with a reliable / robust way to do it. It could possibly be done with some of the Windows multi-media support, but that would leave the Linux/macOS/FreeBSD people in the dark. I just added TS2100 support to Lady Heather... but it only reads the time code output string and drives the clock displays. I don't have a TS2100 to properly test it, but it works when fed with a simulation file. > RANDOM QUESTION -- does anybody know of software to *generate* IRIG time > code? Something in C that's adaptable to a modern micro would be good. In > something like a Raspberry Pi 3, IRIG generation would make a nice addition > to Lady Heather... ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TymServe TS2100 dead power supply
Many thanks for the replies on this one. Before I made the first post, I'd pulled the supply, given it a visual and nasal inspection, checked the outputs for shorts, and powered it up on the bench. Dead (and dead quiet, not even the tick-tick-tick of a switcher with a shorted output). In my perusal of the archives, someone observed that it was a standard Astec LPT-42 supply. Lo and behold, a label on the primary filter cap of my dead switcher identifies it as an ASTEC LPT42. I looked around -- Mouser and Digi-Key were within $1 of each other. Not too surprising, actually, pretty much ALL the sellers on eBay wanted more for units of dubious heritage than Mouser and Digi-Key wanted for a new one. Already had some bits and pieces I needed from Digi Key so I added a new LPT-42 on to the order. New supply arrived. Installed, connected power, turned it on and things light up. Pulled the fuse out of the old supply to save and tossed the old supply in the bin. Last time I got a good electrical shock (if there is such a thing) was from a faulty switching power supply; another reason to diagnose this one with my wallet! Back in operation again. Yes, I *still* have to deal with the old GPS module and the issues it creates. But my TS2100 is back on the air, driving my IRIG displays and providing 10 MHz to various pieces of equipment. RANDOM QUESTION -- does anybody know of software to *generate* IRIG time code? Something in C that's adaptable to a modern micro would be good. In something like a Raspberry Pi 3, IRIG generation would make a nice addition to Lady Heather... cheers and 73, Bob K6RTM ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TymServe TS2100 dead power supply
Bob Classic sign of bad electrolytics. Several comments. I have had equipment with small switchers that were separate form the mother board. Often an actual supply could be found cheap. When I can't its time to check the caps. Really cheap to replace. Regards Paul WB8TSL On Mon, Mar 5, 2018 at 7:52 PM, Bob Martin wrote: > We had a brief power outage a few days ago. > > My TS2100 didn't power up afterwards. Fuses are fine, AC power delivered > to power supply, which is producing nothing. Nothing looks/smells fried on > the power supply. > > Couldn't find data on what the power supply output voltages should be; not > in the meagre documentation, . > > I'd appreciate help from someone with a TS2100 while I look for faults in > this little switching power supply. Looks like three voltages, +5 and what > else? Is this a more or less standard supply? > > Appreciate any help I can get! > > Bob K6RTM > > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TymServe TS2100 dead power supply
Bob, Just a reminder, as it came from the factory, this unit has a week rollover issue unless it has been upgraded. Check out the TN archives and Google for the upgrade fix suggestions. (mine was in a production installation when the rollover occurred, and the resulting pain seems to be forever etched in my mind.) Luke. On Mon, Mar 5, 2018 at 7:52 PM, Bob Martin wrote: > We had a brief power outage a few days ago. > > My TS2100 didn't power up afterwards. Fuses are fine, AC power delivered > to power supply, which is producing nothing. Nothing looks/smells fried on > the power supply. > > Couldn't find data on what the power supply output voltages should be; not > in the meagre documentation, . > > I'd appreciate help from someone with a TS2100 while I look for faults in > this little switching power supply. Looks like three voltages, +5 and what > else? Is this a more or less standard supply? > > Appreciate any help I can get! > > Bob K6RTM > > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TymServe TS2100 dead power supply
If it's not restarted after a power down and there's no 'ticking' sound from it then it's likely to be a problem with the bootstrap supply, switchers will run for years once they're running but while they're running the small capacitor (of the order of 47uF) and the resistor that feeds it (often 220K-470K but can be outside that range) will dry up or go high in value and as soon as you power it down and try to restart, it fails because that little circuit doesn't provide the supply needed to kick the chip into life. First order of business, check the rails on the secondary for shorts (tantalums have been mentioned by someone else) and then, after making sure the main reservoir capacitor is discharged, check and high value resistors and low voltage/value capacitors on the primary. The data sheet for SMPSU control chips like the UC3844 usually have a reference circuit which is often copied by SMPSU manufacturers with only minor component changes. On 6 March 2018 at 04:36, Mark Sims wrote: > First check for power / ground shorts on the power supply outputs with an > ohm meter. There is a good chance of a shorted tantalum cap somewhere in > the system shutting down the supply. If the power supply is connected to > the system via a connector, disconnect it from the system and see if the > supply puts out anything. > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > -- Clint. M0UAW, 2E0EOA, M6KOX *No trees were harmed in the sending of this mail. However, a large number of electrons were greatly inconvenienced.* ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] TymServe TS2100 dead power supply
First check for power / ground shorts on the power supply outputs with an ohm meter. There is a good chance of a shorted tantalum cap somewhere in the system shutting down the supply. If the power supply is connected to the system via a connector, disconnect it from the system and see if the supply puts out anything. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] TymServe TS2100 dead power supply
We had a brief power outage a few days ago. My TS2100 didn't power up afterwards. Fuses are fine, AC power delivered to power supply, which is producing nothing. Nothing looks/smells fried on the power supply. Couldn't find data on what the power supply output voltages should be; not in the meagre documentation, . I'd appreciate help from someone with a TS2100 while I look for faults in this little switching power supply. Looks like three voltages, +5 and what else? Is this a more or less standard supply? Appreciate any help I can get! Bob K6RTM ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.