Re: [time-nuts] HP Z3815A manual/info needed

2012-08-06 Thread Azelio Boriani
The only info you can find (AFAIK) is here:

www.leapsecond.com/museum/*z3815a*/

www.qsl.net/z/zl1bpu//PROJ/Myrefs.htm


if you can find a service manual, please, let us know.

scanning the archive for time-nuts gives:

There is a full (unofficial) *manual* and software available on CD for the
*Z3815A* - write to ksca...@bytecan.com.au


On Mon, Aug 6, 2012 at 12:19 PM, Morris Odell vilgo...@bigpond.net.auwrote:

 Hi all,

 A few of us down here in Oz have HP Z3815A GPS disciplined frequency
 standards running. One of my friends, who does not belong to this group,
 has
 had a fault develop in his unit which seems to be in the GPS receiver
 section. The serial port terminal program  indicates that all is well but
 no
 sats are being received even with an antenna change.

 Are there any manuals or service information available for these units?
 Even
 a block diagram? Any help gratefully accepted!

 Regards to all,

 Morris VK3DOC


 ___
 time-nuts mailing list -- time-nuts@febo.com
 To unsubscribe, go to
 https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
 and follow the instructions there.

___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


Re: [time-nuts] HP Z3815A manual/info needed

2012-08-06 Thread Azelio Boriani
Forgot to mention: if your Z3815A is like mine, then the GPS antenna cable
is routed in a strange way. To bypass the large rear connector, the cable
is soldered on the PCB where a short cable with connectors then brigs it to
the Furuno GPS unit. There is a DC blocking capacitor so that the antenna
is supplied by the main board and not by the GPS unit. Chack that
connection.

On Mon, Aug 6, 2012 at 12:44 PM, Azelio Boriani azelio.bori...@screen.itwrote:

 The only info you can find (AFAIK) is here:

 www.leapsecond.com/museum/*z3815a*/

 www.qsl.net/z/zl1bpu//PROJ/Myrefs.htm


 if you can find a service manual, please, let us know.

 scanning the archive for time-nuts gives:

 There is a full (unofficial) *manual* and software available on CD for
 the *Z3815A* - write to ksca...@bytecan.com.au



 On Mon, Aug 6, 2012 at 12:19 PM, Morris Odell vilgo...@bigpond.net.auwrote:

 Hi all,

 A few of us down here in Oz have HP Z3815A GPS disciplined frequency
 standards running. One of my friends, who does not belong to this group,
 has
 had a fault develop in his unit which seems to be in the GPS receiver
 section. The serial port terminal program  indicates that all is well but
 no
 sats are being received even with an antenna change.

 Are there any manuals or service information available for these units?
 Even
 a block diagram? Any help gratefully accepted!

 Regards to all,

 Morris VK3DOC


 ___
 time-nuts mailing list -- time-nuts@febo.com
 To unsubscribe, go to
 https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
 and follow the instructions there.



___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


Re: [time-nuts] HP Z3815A manual/info needed

2012-08-06 Thread Bob Camp
Hi

If the 3815 is similar to the other HP boxes, there's a GPS receiver card in
it. Some are derivatives of the Motorola UT series, some come from other
manufacturers. Swapping the cards between two boxes might speed up the
troubleshooting process. 

Bob

-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Morris Odell
Sent: Monday, August 06, 2012 6:19 AM
To: time-nuts@febo.com
Subject: [time-nuts] HP Z3815A manual/info needed

Hi all,

A few of us down here in Oz have HP Z3815A GPS disciplined frequency
standards running. One of my friends, who does not belong to this group, has
had a fault develop in his unit which seems to be in the GPS receiver
section. The serial port terminal program  indicates that all is well but no
sats are being received even with an antenna change.

Are there any manuals or service information available for these units? Even
a block diagram? Any help gratefully accepted!

Regards to all,

Morris VK3DOC


___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.