Re: [time-nuts] Symmetricon 58534A manual / setup

2007-12-08 Thread phil

- Original Message - 
From: Didier Juges [EMAIL PROTECTED]
To: 'Discussion of precise time and frequency measurement'
time-nuts@febo.com
Sent: Saturday, December 08, 2007 10:01 AM
Subject: Re: [time-nuts] Symmetricon 58534A manual / setup


 Sometimes, the answer comes from the most unexpected places: the 58534
data
 sheet (not sure there is a manual) is on the Symmetricom web site:

 http://ngn.symmetricom.com/products/Subsystems_Components/58534A.asp

 (it's on my web site too now)

 Didier KO4BB

Didier,
I Do appreciate that but that is just the data sheet. I need the pin-outs
and cable configuration as well.  I have the factory cable but without the
manual I'm lost.

It is my understanding it is available for free to download from Symmetricom
if you have an account or you are a Symmetricom customer. Unfortunately I
don't have an account, that's why I tried this board. I've scoured Google
and the data sheet is as close as I have found.

Many Thanks,
Phil


___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


Re: [time-nuts] Symmetricon 58534A manual / setup

2007-12-08 Thread Don Mimlitch
I also purchased two of these units.

Although I could not find a spec. It appears that it has the same Pinout as the:

ONCORE Remote GPS Antenna Receiver
ACUTIME 2000
Trimble Palisade


The Provided cable only brings out pins 1-5, 9, 11, 12
These Correspond to

Pin 01Red Vcc (+8 - 36 VDC)
Pin 02Purple Port B Recv-
Pin 03Orange Port B Recv+
Pin 04Gray Port B Transmit-
Pin 05White Port B Transmit+
Pin 09Black Ground
Pin 11Green 1PPS Transmit+
Pin 12Blue 1PPS Transmit-


I connected +12VDC to Pin 1 and Goind to Pin 9 and after about 20 Minutes I got 
good 1PPS from Pin 11 with 50% Duty Cycle (500ms).

I have not connected the RS422 Yet but on the scope it looked like it was 
transmiting something.

I do not know if the protocol is:
NMEA
ONCORE Binary
Trimble TSIP
Trimble TIAP

or some other Protocol.

As I learn more I will let you know.

I have PDF's for both the ACUTIME 2000 and the ONCORE Remote which I can send 
to you.
There is information on www.leapsecond.com about the Trimble Palisade.

Previous Message:
Date: Sat, 8 Dec 2007 08:53:47 -0500

From: phil [EMAIL PROTECTED]
Subject: Re: [time-nuts] Symmetricon 58534A manual / setup
To: Discussion of precise time and frequency measurement
 time-nuts@febo.com
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1

Hello Time Nuts,
Would anyone have a PDF manual and/or the configuration software or
 links to it for a Symmetricon 58534A GPS Timing Antenna they would be
 willing to share ?

Many Thanks,
Phil Harwood


   
-
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


Re: [time-nuts] Symmetricon 58534A manual / setup

2007-12-08 Thread phil
Tom
You are correct; it is a complete unit with a 1pps and RS422 output for time
and setup/control. I wanted to try to use 3 of them in/for time stamps for
triangulating lightning strike data. With a 100 ns timing accuracy I would
think it may work for my application.

The manual is available for free (download) from Symetricon if you have an
account or are an existing customer. Unfortunately I have neither. Should no
one in the time-nuts group help I'll go to Symmetricon next week and I'll be
happy to share the manual with you.

Don, Interesting on what you discovered on pin outs. I have some units with
just wires out and two that came with RJ45's on the end. I'll compare wire
colors and hope they match. Thanks for giving me a starting place with the
wiring.

They have a simple setup program for that series of units but again I don't
have it. Protocol, who knows, I have heard it is a variation on nmea, but
that remains to be seen.

Phil


___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.