Re: [time-nuts] TU60-D120-131 Specs....?
may be this zip-file from James Miller helps to set up the Jupiter properly: http://www.jrmiller.demon.co.uk/projects/ministd/jupcom.zip Götz Am 29.06.2016 um 10:45 schrieb Bryan _: Sorry to be so dense on this but doesn't the unit just default to the Jupiter-T command set on power up. I should be able to just enter @@Cj and receive the (manufacturer name, model, serial number and software revision ) shouldn't I? -=Bryan=- From: hol...@hotmail.com To: time-nuts@febo.com Date: Wed, 29 Jun 2016 02:42:50 + Subject: [time-nuts] TU60-D120-131 Specs? "@ @ W b 0x01 cksum 0x0D 0x0A" will switch from Motorola mode to Zodiac mode. The checksum is the XOR of all bytes after the @@ and before the cksum byte. The 0x?? values represent binary bytes. The spaces are for clarity and are not sent. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. -- Götz Romahn ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TU60-D120-131 Specs....?
Sorry to be so dense on this but doesn't the unit just default to the Jupiter-T command set on power up. I should be able to just enter @@Cj and receive the (manufacturer name, model, serial number and software revision ) shouldn't I? -=Bryan=- > From: hol...@hotmail.com > To: time-nuts@febo.com > Date: Wed, 29 Jun 2016 02:42:50 + > Subject: [time-nuts] TU60-D120-131 Specs? > > "@ @ W b 0x01 cksum 0x0D 0x0A" will switch from Motorola mode to Zodiac > mode. The checksum is the XOR of all bytes after the @@ and before the cksum > byte. The 0x?? values represent binary bytes. The spaces are for clarity > and are not sent. > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TU60-D120-131 Specs....?
Thanks Mark, just not getting anything on the terminal program, other than a little square character upon a restart, even tried my PicKit 2 UART tool. Tried both 4800 8N1 and 9600 8N1. Have tried sending @@Cj and a host of other supported commands from the users manual ie @@Ea. Even tried some of the other Zodiac commands as I understand 1331 etc Table 6-3 Jupiter-T default command set The following command is available only on the Navman Jupiter-T receiver: @@Wb: commands the receiver to go to Navman binary protocol Note: the receiver will always revert to the above protocol on power cycling by using the Navman binary command 1331 (message protocol control) when in the Navman binary mode. When set to the Navman binary mode, all of the standard Navman messages are supported as well as additional commands relating to timing applications. -=Bryan=- > From: hol...@hotmail.com > To: time-nuts@febo.com > Date: Tue, 28 Jun 2016 15:28:28 + > Subject: [time-nuts] TU60-D120-131 Specs? > > They default to speaking Motorola binary data. The burst of data at power-up > is the Motorola @@Cj version info string. You then have to send it some > commands to enable various messages. There is a command to enable Zodiac > binary mode. I don't think that they speak NMEA. > - > > Is there any trick in getting serial data from these units. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TU60-D120-131 Specs....?
Mark: Is there any trick in getting serial data from these units. I have my terminal program set to 4800 8N1 and the txd and rxd pins on the receiver connected through a TTL/RS232 converter to the PC. Can not get anything on the terminal screen. Scoping the TXD pin on the receiver and I see a burst of data at power up, but that is about it. Any help appreciated. -=Bryan=- > From: hol...@hotmail.com > To: time-nuts@febo.com > Date: Thu, 16 Jun 2016 01:02:05 + > Subject: [time-nuts] TU60-D120-131 Specs? > > From the Zodiac binary message, mine reports 12 channels, software ver > 93.07 from 01/16/04, hardware options 5843 (hex). > -- > > I think the firmware version is in one of the NMEA commands. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TU60-D120-131 Specs....?
Thanks, sounds like the TU60-D120 series has a completely different firmware numbering system than the TU30-140/410 in the link below. I ordered one and hopefully it will be fine. Suspect they are newer versions than the TU30's http://www.jrmiller.demon.co.uk/projects/ministd/frqstd0.htm -=Bryan=- > From: hol...@hotmail.com > To: time-nuts@febo.com > Date: Thu, 16 Jun 2016 01:02:05 + > Subject: [time-nuts] TU60-D120-131 Specs? > > From the Zodiac binary message, mine reports 12 channels, software ver > 93.07 from 01/16/04, hardware options 5843 (hex). > -- > > I think the firmware version is in one of the NMEA commands. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TU60-D120-131 Specs....?
Yes, that's the seller. I think the firmware version is in one of the NMEA commands. -=Bryan=- > From: hol...@hotmail.com > To: time-nuts@febo.com > Date: Wed, 15 Jun 2016 04:37:13 + > Subject: [time-nuts] TU60-D120-131 Specs? > > Mine came from seller "electronics plus" in Michigan (?) ... not sure of the > firmware, all my machines are currently tied up doing other stuff at the > moment. > - > Did you order yours from the same seller on Ebay. > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TU60-D120-131 Specs....?
Mark: Did you order yours from the same seller on Ebay. I tried contacting the seller to enquire if he knew what the firmware version was. Unfortunately he did not, was hoping they are v1.18 or greater. -=Bryan=- > From: hol...@hotmail.com > To: time-nuts@febo.com > Date: Tue, 14 Jun 2016 19:24:55 + > Subject: [time-nuts] TU60-D120-131 Specs? > > They run on 5V, talk either Motorola binary (default at power-on) or Zodiac > binary (serial data at 9600:8N1). The antenna connector is MCX. The one I > got in last week does not have any GPS week rollover problems. > Their Motorola binary mode seems to have issues setting TRAIM parameters > using Motorola commands... works fine using the Zodiac commands. Hint: > beware of any receivers that emulate Motorola binary (or any other receiver > language)... all of them I have tested have some issues doing it. It's best > to run them in their native mode . > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] TU60-D120-131 Specs....?
Datasheet: http://www.rabel.org/archives/Navman_Jupiter_11_12/LA010050B_JupiterT_DataSheet.pdf Example projects: http://www.jrmiller.demon.co.uk/projects/ministd/frqstd0.htm http://www.vhfcomm.co.uk/GPS%20control.pdf More info by searching Google for NAVMAN TU60-D120 Cheers, Dave M Bud Patten wrote: Does anyone know anything about the TU60-D120-131 being offered on ebay (voltage? 10Khz? 1 pps?, etc.) . The seller tells me that he doesn't know anything about the item he is selling.. ;-) Any input would be appreciated. Regards, Bud ARS W0LCP ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.