Hi
There are a few folks around who have done boards. The circuit is simple
enough that point to point wiring on perf board works pretty well. ( = mixer
plus opamp after it).
Bob
> On Sep 5, 2019, at 12:19 PM, Peter Vince wrote:
>
> On Thu, 5 Sep 2019 at 19:00, Bob kb8tq wrote:
>
>> ...If you indeed want to do a quick and simple measurement that goes into
>> 1 Hz ( or possibly less)
>> the answer is to use a mixer based setup. A single mixer setup ( half of a
>> DMTD) will do a much
>> better job than a counter based approach. Cost wise it is not very
>> expensive at all …
>>
>> Bob
>>
>
> I wonder if one of you clever people could design a circuit, and get kits
> produced by TAPR ?
>
> Peter
> ___
> time-nuts mailing list -- time-nuts@lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
