Re: [Tinyos-help] Problem ADC with MSP430 in tinyos 2.1
Hello everybody,
Thank you very much for the help everyone, the error was not called
Control.start.
My apologies for the translation.
A greeting
El 27 de septiembre de 2011 20:46, Antonio Linan escribió:
> Jan is right, no calls to Control.start() are made, also you should do
> something like:
>
>
> event void Control.startDone(error_t err) {
> if (error == SUCCESS){
> // continue
> } else {
> call Control.start();
> }
>
> To ensure is running, you can also consider to use leds to ease the
> debugging process.
>
> Good luck :)
>
> Antonio.
>
> On Tue, Sep 27, 2011 at 8:06 PM, Jan Hauer wrote:
>
>> It looks like you forget to call SplitControl.start() (provided by
>> ActiveMessageC or SerialActiveMessageC) ...
>>
>> Jan
>>
>> On Tue, Sep 27, 2011 at 7:10 PM, Juan Verdu wrote:
>> > Hello everyone,
>> >
>> > I am working with a MSP430F2617 microcontroller and a radio CC2420
>> under
>> > the Zolertia driver.
>> >
>> > I am making an application to read the internal temperature of the
>> > microcontroller, and later I will send the information to a base station
>> > under the Basestation application.
>> >
>> > My application performs Send () correctly but this application fails
>> > AM.sendDone (), if I change the component SerialActiveMessageC by
>> > ActiveMessageC, the same problem will happen. In this case, I do not use
>> a
>> > radio. I use the serial port and I wouldn´t use the BaseStation
>> application.
>> >
>> > The code is as follows:
>> >
>> >
>> > Makefile
>> >
>> > COMPONENT=TestAdcAppC
>> > CFLAGS += -DADC12_TIMERA_ENABLED
>> > CFLAGS += -DADC12_ONLY_WITH_DMA
>> > include $(MAKERULES)
>> > CFLAGS += -DCC2420_DEF_CHANNEL=20
>> >
>> > TestAdc.h
>> >
>> >
>> > #ifndef TEST_SERIAL_H
>> > #define TEST_SERIAL_H
>> > typedef nx_struct test_serial_msg {
>> > nx_uint16_t counter;
>> > } test_serial_msg_t;
>> > enum {
>> > AM_TEST_SERIAL_MSG = 0x89,
>> > };
>> > #endif
>> >
>> > TestAdcC.nc
>> >
>> > #include "Timer.h"
>> > #include "TestAdc.h"
>> >
>> > module TestAdcC
>> > {
>> > uses interface Boot;
>> > uses interface Leds;
>> > uses interface Timer as Timer0;
>> > uses interface Msp430Adc12Overflow as overflow;
>> > uses interface Msp430Adc12SingleChannel as adc;
>> > uses interface Resource;
>> > uses interface SplitControl as Control;
>> > uses interface Packet;
>> > uses interface AMSend;
>> > }
>> >
>> > implementation
>> > {
>> > #define BUF_SIZE 100
>> > uint16_t buf[BUF_SIZE];
>> > message_t packet;
>> >
>> > uint16_t counter = 0;
>> > uint16_t Data;
>> >
>> > void configureSingle();
>> > msp430adc12_channel_config_t adcconfig = {
>> > inch: SUPPLY_VOLTAGE_HALF_CHANNEL,
>> > sref: REFERENCE_VREFplus_AVss,
>> > ref2_5v: REFVOLT_LEVEL_1_5,
>> > adc12ssel: SHT_SOURCE_ACLK,
>> > adc12div: SHT_CLOCK_DIV_1,
>> > sht: SAMPLE_HOLD_4_CYCLES,
>> > sampcon_ssel: SAMPCON_SOURCE_SMCLK,
>> > sampcon_id: SAMPCON_CLOCK_DIV_1
>> > };
>> >
>> > event void Boot.booted()
>> > {
>> > call Resource.request();
>> >}
>> > async event void overflow.conversionTimeOverflow(){
>> >}
>> > async event void overflow.memOverflow(){
>> > }
>> >
>> > async event uint16_t *adc.multipleDataReady(uint16_t *buffer, uint16_t
>> > numSamples){
>> > return buffer;
>> > }
>> > task void send(){
>> > test_serial_msg_t* rcm = (test_serial_msg_t*)call
>> > Packet.getPayload(&packet, sizeof(test_serial_msg_t));
>> > // call Resource.release();
>> > call Leds.led0Toggle();
>> > rcm->counter = Data;
>> > if( call AMSend.send(AM_BROADCAST_ADDR, &packet,
>> > sizeof(test_serial_msg_t)) == SUCCESS)
>> > call Leds.led1Toggle();
>> > }
>> > async event error_t adc.singleDataReady(uint16_t data){
>> > Data = data;
>> > post send();
>> > return SUCCESS;
>> > }
>> > event void Resource.granted(){
>> > configureSingle();
>> > call Timer0.startPeriodic(2048);
>> > }
>> > void configureSingle(){
>> > error_t e;
>> > e = call adc.configureSingle(&adcconfig);
>> > }
>> > event void Timer0.fired()
>> > {
>> > call adc.getData();
>> > }
>> > event void AMSend.sendDone(message_t* bufPtr, error_t error) {
>> > call Leds.led2Toggle();
>> > }
>> > event void Control.startDone(error_t err) {
>> > }
>> >
>> > event void Control.stopDone(error_t err) {
>> > }
>> > }
>> >
>> > TestAdcAppC.nc
>> >
>> > #include "TestAdc.h"
>> > configuration TestAdcAppC {
>> > }
>> > implementation
>> > {
>> > components MainC,
>> > TestAdcC,
>> > LedsC;
>> > components ActiveMessageC as AM;
>> > components new TimerMilliC() as Timer0;
>> > components new Msp430Adc12ClientAutoDMAC() as Lectura;
>> > TestAdcC.overflow -> Lectura;
>> > TestAdcC.adc -> Lectura;
>> > TestAdcC.Resource -> Lectura;
>> >TestAdcC -> MainC.Boot;
>> > TestAdcC.Leds -> LedsC;
>> > TestAdcC.Timer0 -> Timer0;
>> > TestAdcC.Control -> AM;
Re: [Tinyos-help] Problem ADC with MSP430 in tinyos 2.1
Jan is right, no calls to Control.start() are made, also you should do
something like:
event void Control.startDone(error_t err) {
if (error == SUCCESS){
// continue
} else {
call Control.start();
}
To ensure is running, you can also consider to use leds to ease the
debugging process.
Good luck :)
Antonio.
On Tue, Sep 27, 2011 at 8:06 PM, Jan Hauer wrote:
> It looks like you forget to call SplitControl.start() (provided by
> ActiveMessageC or SerialActiveMessageC) ...
>
> Jan
>
> On Tue, Sep 27, 2011 at 7:10 PM, Juan Verdu wrote:
> > Hello everyone,
> >
> > I am working with a MSP430F2617 microcontroller and a radio CC2420 under
> > the Zolertia driver.
> >
> > I am making an application to read the internal temperature of the
> > microcontroller, and later I will send the information to a base station
> > under the Basestation application.
> >
> > My application performs Send () correctly but this application fails
> > AM.sendDone (), if I change the component SerialActiveMessageC by
> > ActiveMessageC, the same problem will happen. In this case, I do not use
> a
> > radio. I use the serial port and I wouldn´t use the BaseStation
> application.
> >
> > The code is as follows:
> >
> >
> > Makefile
> >
> > COMPONENT=TestAdcAppC
> > CFLAGS += -DADC12_TIMERA_ENABLED
> > CFLAGS += -DADC12_ONLY_WITH_DMA
> > include $(MAKERULES)
> > CFLAGS += -DCC2420_DEF_CHANNEL=20
> >
> > TestAdc.h
> >
> >
> > #ifndef TEST_SERIAL_H
> > #define TEST_SERIAL_H
> > typedef nx_struct test_serial_msg {
> > nx_uint16_t counter;
> > } test_serial_msg_t;
> > enum {
> > AM_TEST_SERIAL_MSG = 0x89,
> > };
> > #endif
> >
> > TestAdcC.nc
> >
> > #include "Timer.h"
> > #include "TestAdc.h"
> >
> > module TestAdcC
> > {
> > uses interface Boot;
> > uses interface Leds;
> > uses interface Timer as Timer0;
> > uses interface Msp430Adc12Overflow as overflow;
> > uses interface Msp430Adc12SingleChannel as adc;
> > uses interface Resource;
> > uses interface SplitControl as Control;
> > uses interface Packet;
> > uses interface AMSend;
> > }
> >
> > implementation
> > {
> > #define BUF_SIZE 100
> > uint16_t buf[BUF_SIZE];
> > message_t packet;
> >
> > uint16_t counter = 0;
> > uint16_t Data;
> >
> > void configureSingle();
> > msp430adc12_channel_config_t adcconfig = {
> > inch: SUPPLY_VOLTAGE_HALF_CHANNEL,
> > sref: REFERENCE_VREFplus_AVss,
> > ref2_5v: REFVOLT_LEVEL_1_5,
> > adc12ssel: SHT_SOURCE_ACLK,
> > adc12div: SHT_CLOCK_DIV_1,
> > sht: SAMPLE_HOLD_4_CYCLES,
> > sampcon_ssel: SAMPCON_SOURCE_SMCLK,
> > sampcon_id: SAMPCON_CLOCK_DIV_1
> > };
> >
> > event void Boot.booted()
> > {
> > call Resource.request();
> >}
> > async event void overflow.conversionTimeOverflow(){
> >}
> > async event void overflow.memOverflow(){
> > }
> >
> > async event uint16_t *adc.multipleDataReady(uint16_t *buffer, uint16_t
> > numSamples){
> > return buffer;
> > }
> > task void send(){
> > test_serial_msg_t* rcm = (test_serial_msg_t*)call
> > Packet.getPayload(&packet, sizeof(test_serial_msg_t));
> > // call Resource.release();
> > call Leds.led0Toggle();
> > rcm->counter = Data;
> > if( call AMSend.send(AM_BROADCAST_ADDR, &packet,
> > sizeof(test_serial_msg_t)) == SUCCESS)
> > call Leds.led1Toggle();
> > }
> > async event error_t adc.singleDataReady(uint16_t data){
> > Data = data;
> > post send();
> > return SUCCESS;
> > }
> > event void Resource.granted(){
> > configureSingle();
> > call Timer0.startPeriodic(2048);
> > }
> > void configureSingle(){
> > error_t e;
> > e = call adc.configureSingle(&adcconfig);
> > }
> > event void Timer0.fired()
> > {
> > call adc.getData();
> > }
> > event void AMSend.sendDone(message_t* bufPtr, error_t error) {
> > call Leds.led2Toggle();
> > }
> > event void Control.startDone(error_t err) {
> > }
> >
> > event void Control.stopDone(error_t err) {
> > }
> > }
> >
> > TestAdcAppC.nc
> >
> > #include "TestAdc.h"
> > configuration TestAdcAppC {
> > }
> > implementation
> > {
> > components MainC,
> > TestAdcC,
> > LedsC;
> > components ActiveMessageC as AM;
> > components new TimerMilliC() as Timer0;
> > components new Msp430Adc12ClientAutoDMAC() as Lectura;
> > TestAdcC.overflow -> Lectura;
> > TestAdcC.adc -> Lectura;
> > TestAdcC.Resource -> Lectura;
> >TestAdcC -> MainC.Boot;
> > TestAdcC.Leds -> LedsC;
> > TestAdcC.Timer0 -> Timer0;
> > TestAdcC.Control -> AM;
> > TestAdcC.AMSend -> AM.AMSend[AM_TEST_SERIAL_MSG];
> > TestAdcC.Packet -> AM;
> > }
> >
> > Could someone help me?
> >
> > Escribe texto o la dirección de un sitio web, o bien, traduce un
> documento.
> > Cancelar
> >
> > traducción del español al inglés
> >
> > A greeting and thank you very much
> >
> > ___
> > Tinyos-help mailing list
> > Tinyos
Re: [Tinyos-help] Problem ADC with MSP430 in tinyos 2.1
It looks like you forget to call SplitControl.start() (provided by
ActiveMessageC or SerialActiveMessageC) ...
Jan
On Tue, Sep 27, 2011 at 7:10 PM, Juan Verdu wrote:
> Hello everyone,
>
> I am working with a MSP430F2617 microcontroller and a radio CC2420 under
> the Zolertia driver.
>
> I am making an application to read the internal temperature of the
> microcontroller, and later I will send the information to a base station
> under the Basestation application.
>
> My application performs Send () correctly but this application fails
> AM.sendDone (), if I change the component SerialActiveMessageC by
> ActiveMessageC, the same problem will happen. In this case, I do not use a
> radio. I use the serial port and I wouldn´t use the BaseStation application.
>
> The code is as follows:
>
>
> Makefile
>
> COMPONENT=TestAdcAppC
> CFLAGS += -DADC12_TIMERA_ENABLED
> CFLAGS += -DADC12_ONLY_WITH_DMA
> include $(MAKERULES)
> CFLAGS += -DCC2420_DEF_CHANNEL=20
>
> TestAdc.h
>
>
> #ifndef TEST_SERIAL_H
> #define TEST_SERIAL_H
> typedef nx_struct test_serial_msg {
> nx_uint16_t counter;
> } test_serial_msg_t;
> enum {
> AM_TEST_SERIAL_MSG = 0x89,
> };
> #endif
>
> TestAdcC.nc
>
> #include "Timer.h"
> #include "TestAdc.h"
>
> module TestAdcC
> {
> uses interface Boot;
> uses interface Leds;
> uses interface Timer as Timer0;
> uses interface Msp430Adc12Overflow as overflow;
> uses interface Msp430Adc12SingleChannel as adc;
> uses interface Resource;
> uses interface SplitControl as Control;
> uses interface Packet;
> uses interface AMSend;
> }
>
> implementation
> {
> #define BUF_SIZE 100
> uint16_t buf[BUF_SIZE];
> message_t packet;
>
> uint16_t counter = 0;
> uint16_t Data;
>
> void configureSingle();
> msp430adc12_channel_config_t adcconfig = {
> inch: SUPPLY_VOLTAGE_HALF_CHANNEL,
> sref: REFERENCE_VREFplus_AVss,
> ref2_5v: REFVOLT_LEVEL_1_5,
> adc12ssel: SHT_SOURCE_ACLK,
> adc12div: SHT_CLOCK_DIV_1,
> sht: SAMPLE_HOLD_4_CYCLES,
> sampcon_ssel: SAMPCON_SOURCE_SMCLK,
> sampcon_id: SAMPCON_CLOCK_DIV_1
> };
>
> event void Boot.booted()
> {
> call Resource.request();
> }
> async event void overflow.conversionTimeOverflow(){
> }
> async event void overflow.memOverflow(){
> }
>
> async event uint16_t *adc.multipleDataReady(uint16_t *buffer, uint16_t
> numSamples){
> return buffer;
> }
> task void send(){
> test_serial_msg_t* rcm = (test_serial_msg_t*)call
> Packet.getPayload(&packet, sizeof(test_serial_msg_t));
> // call Resource.release();
> call Leds.led0Toggle();
> rcm->counter = Data;
> if( call AMSend.send(AM_BROADCAST_ADDR, &packet,
> sizeof(test_serial_msg_t)) == SUCCESS)
> call Leds.led1Toggle();
> }
> async event error_t adc.singleDataReady(uint16_t data){
> Data = data;
> post send();
> return SUCCESS;
> }
> event void Resource.granted(){
> configureSingle();
> call Timer0.startPeriodic(2048);
> }
> void configureSingle(){
> error_t e;
> e = call adc.configureSingle(&adcconfig);
> }
> event void Timer0.fired()
> {
> call adc.getData();
> }
> event void AMSend.sendDone(message_t* bufPtr, error_t error) {
> call Leds.led2Toggle();
> }
> event void Control.startDone(error_t err) {
> }
>
> event void Control.stopDone(error_t err) {
> }
> }
>
> TestAdcAppC.nc
>
> #include "TestAdc.h"
> configuration TestAdcAppC {
> }
> implementation
> {
> components MainC,
> TestAdcC,
> LedsC;
> components ActiveMessageC as AM;
> components new TimerMilliC() as Timer0;
> components new Msp430Adc12ClientAutoDMAC() as Lectura;
> TestAdcC.overflow -> Lectura;
> TestAdcC.adc -> Lectura;
> TestAdcC.Resource -> Lectura;
> TestAdcC -> MainC.Boot;
> TestAdcC.Leds -> LedsC;
> TestAdcC.Timer0 -> Timer0;
> TestAdcC.Control -> AM;
> TestAdcC.AMSend -> AM.AMSend[AM_TEST_SERIAL_MSG];
> TestAdcC.Packet -> AM;
> }
>
> Could someone help me?
>
> Escribe texto o la dirección de un sitio web, o bien, traduce un documento.
> Cancelar
>
> traducción del español al inglés
>
> A greeting and thank you very much
>
> ___
> Tinyos-help mailing list
> Tinyos-help@millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Re: [Tinyos-help] Problem ADC with MSP430 in tinyos 2.1
There may be an overloading of "AMSend" names going on...
In the congig file try, instead of
TestAdcC.AMSend -> AM.AMSend[AM_TEST_SERIAL_MSG];
something like:
TestAdcC.TestMessage -> AM.AMSend[AM_TEST_SERIAL_MSG];
And then in the program file use:
call TestMessage.send(AM_BROADCAST_ADDR, ...
and
event void TestMessage.sendDone(message_t* ...
That's how I would do it with the old and moldy TOS1.x code anyway.
MS
Juan Verdu wrote:
> Hello everyone,
>
> I am working with a MSP430F2617 microcontroller and a radio CC2420
> under the Zolertia driver.
>
> I am making an application to read the internal temperature of the
> microcontroller, and later I will send the information to a base station
> under the Basestation application.
>
> My application performs Send () correctly but this application fails
> AM.sendDone (), if I change the component SerialActiveMessageC by
> ActiveMessageC, the same problem will happen. In this case, I do not use
> a radio. I use the serial port and I wouldn´t use the BaseStation
> application.
>
> The code is as follows:
>
>
> _Makefile_
>
> COMPONENT=TestAdcAppC
> CFLAGS += -DADC12_TIMERA_ENABLED
> CFLAGS += -DADC12_ONLY_WITH_DMA
> include $(MAKERULES)
> CFLAGS += -DCC2420_DEF_CHANNEL=20
>
> _TestAdc.h_
>
>
> #ifndef TEST_SERIAL_H
> #define TEST_SERIAL_H
> typedef nx_struct test_serial_msg {
> nx_uint16_t counter;
> } test_serial_msg_t;
> enum {
> AM_TEST_SERIAL_MSG = 0x89,
> };
> #endif
>
> _TestAdcC.nc _
>
> #include "Timer.h"
> #include "TestAdc.h"
>
> module TestAdcC
> {
> uses interface Boot;
> uses interface Leds;
> uses interface Timer as Timer0;
> uses interface Msp430Adc12Overflow as overflow;
> uses interface Msp430Adc12SingleChannel as adc;
> uses interface Resource;
> uses interface SplitControl as Control;
> uses interface Packet;
> uses interface AMSend;
> }
>
> implementation
> {
> #define BUF_SIZE 100
> uint16_t buf[BUF_SIZE];
> message_t packet;
>
> uint16_t counter = 0;
> uint16_t Data;
>
> void configureSingle();
> msp430adc12_channel_config_t adcconfig = {
> inch: SUPPLY_VOLTAGE_HALF_CHANNEL,
> sref: REFERENCE_VREFplus_AVss,
> ref2_5v: REFVOLT_LEVEL_1_5,
> adc12ssel: SHT_SOURCE_ACLK,
> adc12div: SHT_CLOCK_DIV_1,
> sht: SAMPLE_HOLD_4_CYCLES,
> sampcon_ssel: SAMPCON_SOURCE_SMCLK,
> sampcon_id: SAMPCON_CLOCK_DIV_1
> };
>
> event void Boot.booted()
> {
> call Resource.request();
>}
> async event void overflow.conversionTimeOverflow(){
>}
> async event void overflow.memOverflow(){
> }
>
> async event uint16_t *adc.multipleDataReady(uint16_t *buffer, uint16_t
> numSamples){
> return buffer;
> }
> task void send(){
> test_serial_msg_t* rcm = (test_serial_msg_t*)call
> Packet.getPayload(&packet, sizeof(test_serial_msg_t));
> // call Resource.release();
> call Leds.led0Toggle();
> rcm->counter = Data;
> if( call AMSend.send(AM_BROADCAST_ADDR, &packet,
> sizeof(test_serial_msg_t)) == SUCCESS)
> call Leds.led1Toggle();
> }
> async event error_t adc.singleDataReady(uint16_t data){
> Data = data;
> post send();
> return SUCCESS;
> }
> event void Resource.granted(){
> configureSingle();
> call Timer0.startPeriodic(2048);
> }
> void configureSingle(){
> error_t e;
> e = call adc.configureSingle(&adcconfig);
> }
> event void Timer0.fired()
> {
> call adc.getData();
> }
> event void AMSend.sendDone(message_t* bufPtr, error_t error) {
> call Leds.led2Toggle();
> }
> event void Control.startDone(error_t err) {
> }
>
> event void Control.stopDone(error_t err) {
> }
> }
>
> _TestAdcAppC.nc_
>
> #include "TestAdc.h"
> configuration TestAdcAppC {
> }
> implementation
> {
> components MainC,
> TestAdcC,
> LedsC;
> components ActiveMessageC as AM;
> components new TimerMilliC() as Timer0;
> components new Msp430Adc12ClientAutoDMAC() as Lectura;
> TestAdcC.overflow -> Lectura;
> TestAdcC.adc -> Lectura;
> TestAdcC.Resource -> Lectura;
>TestAdcC -> MainC.Boot;
> TestAdcC.Leds -> LedsC;
> TestAdcC.Timer0 -> Timer0;
> TestAdcC.Control -> AM;
> TestAdcC.AMSend -> AM.AMSend[AM_TEST_SERIAL_MSG];
> TestAdcC.Packet -> AM;
> }
>
> Could someone help me?
>
> Escribe texto o la dirección de un sitio web, o bien, traduce un
> documento .
> Cancelar
>
>
> traducción del español al inglés
>
> A greeting and thank you very much
>
>
>
>
> ___
> Tinyos-help mailing list
> Tinyos-help@millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
___
Tinyos-help mailing list
Tinyos-help@millennium.berk
[Tinyos-help] Problem ADC with MSP430 in tinyos 2.1
Hello everyone,
I am working with a MSP430F2617 microcontroller and a radio CC2420 underthe
Zolertia driver.
I am making an application to read the internal temperature of the
microcontroller, and later I will send the information to a base station under
the Basestation application.
My application performs Send () correctly but this application fails
AM.sendDone (), if I change the component SerialActiveMessageC by
ActiveMessageC, the same problem will happen. In this case, I do not use a
radio. I use the serial port and I wouldn´t use the BaseStation application.
The code is as follows:
*Makefile*
COMPONENT=TestAdcAppC
CFLAGS += -DADC12_TIMERA_ENABLED
CFLAGS += -DADC12_ONLY_WITH_DMA
include $(MAKERULES)
CFLAGS += -DCC2420_DEF_CHANNEL=20
*TestAdc.h*
#ifndef TEST_SERIAL_H
#define TEST_SERIAL_H
typedef nx_struct test_serial_msg {
nx_uint16_t counter;
} test_serial_msg_t;
enum {
AM_TEST_SERIAL_MSG = 0x89,
};
#endif
*TestAdcC.nc *
#include "Timer.h"
#include "TestAdc.h"
module TestAdcC
{
uses interface Boot;
uses interface Leds;
uses interface Timer as Timer0;
uses interface Msp430Adc12Overflow as overflow;
uses interface Msp430Adc12SingleChannel as adc;
uses interface Resource;
uses interface SplitControl as Control;
uses interface Packet;
uses interface AMSend;
}
implementation
{
#define BUF_SIZE 100
uint16_t buf[BUF_SIZE];
message_t packet;
uint16_t counter = 0;
uint16_t Data;
void configureSingle();
msp430adc12_channel_config_t adcconfig = {
inch: SUPPLY_VOLTAGE_HALF_CHANNEL,
sref: REFERENCE_VREFplus_AVss,
ref2_5v: REFVOLT_LEVEL_1_5,
adc12ssel: SHT_SOURCE_ACLK,
adc12div: SHT_CLOCK_DIV_1,
sht: SAMPLE_HOLD_4_CYCLES,
sampcon_ssel: SAMPCON_SOURCE_SMCLK,
sampcon_id: SAMPCON_CLOCK_DIV_1
};
event void Boot.booted()
{
call Resource.request();
}
async event void overflow.conversionTimeOverflow(){
}
async event void overflow.memOverflow(){
}
async event uint16_t *adc.multipleDataReady(uint16_t *buffer, uint16_t
numSamples){
return buffer;
}
task void send(){
test_serial_msg_t* rcm = (test_serial_msg_t*)call
Packet.getPayload(&packet, sizeof(test_serial_msg_t));
// call Resource.release();
call Leds.led0Toggle();
rcm->counter = Data;
if( call AMSend.send(AM_BROADCAST_ADDR, &packet,
sizeof(test_serial_msg_t)) == SUCCESS)
call Leds.led1Toggle();
}
async event error_t adc.singleDataReady(uint16_t data){
Data = data;
post send();
return SUCCESS;
}
event void Resource.granted(){
configureSingle();
call Timer0.startPeriodic(2048);
}
void configureSingle(){
error_t e;
e = call adc.configureSingle(&adcconfig);
}
event void Timer0.fired()
{
call adc.getData();
}
event void AMSend.sendDone(message_t* bufPtr, error_t error) {
call Leds.led2Toggle();
}
event void Control.startDone(error_t err) {
}
event void Control.stopDone(error_t err) {
}
}
*TestAdcAppC.nc*
#include "TestAdc.h"
configuration TestAdcAppC {
}
implementation
{
components MainC,
TestAdcC,
LedsC;
components ActiveMessageC as AM;
components new TimerMilliC() as Timer0;
components new Msp430Adc12ClientAutoDMAC() as Lectura;
TestAdcC.overflow -> Lectura;
TestAdcC.adc -> Lectura;
TestAdcC.Resource -> Lectura;
TestAdcC -> MainC.Boot;
TestAdcC.Leds -> LedsC;
TestAdcC.Timer0 -> Timer0;
TestAdcC.Control -> AM;
TestAdcC.AMSend -> AM.AMSend[AM_TEST_SERIAL_MSG];
TestAdcC.Packet -> AM;
}
Could someone help me?
Escribe texto o la dirección de un sitio web, o bien, traduce un
documento
.
Cancelar
traducción del español al inglés
A greeting and thank you very much
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
