Re: [Tinyos-help] Tmote - Deluge rewrites node numbers for Trawler application (Delta)?

2007-02-06 Thread Joe Polastre 

If Delta is not compiled with Deluge, then you will see this result.
Make sure you include DelugeC in your components.

-Joe

On 2/6/07, Val Zimmer [EMAIL PROTECTED] wrote:

Hi,

Running the Delta code and the trawler application w/ a mix of Tmote Sky
and Tmote Invent motes, we found that every time we reloaded one of the
Images (e.g. reloaded Delta), the node numbers were set to #1, across
the entire network, such that the Trawler application is no longer able
to see the nodes.  (This could only be restored by taking each mote and
physically reloading the Delta software (make tmote reinstall,3 - for
example)).

Is this an artifact of the delta image - i.e. was the image originally
written with the default #1 so that rebooting would cause this issue
(and then the reinstall would be entirely separate), or is this
something that would always happen?  If the latter, might this be fixed
in the near future?

Thanks - Val
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help


___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Re: [Tinyos-help] Tmote - Deluge rewrites node numbers for Trawler application (Delta)?

2007-02-06 Thread Simon Willis 

Hi,

I have a feeling that Deluge is doing a similar thing with my 
application. My application is closely based on Surge. When I reprogram 
my nodes using Deluge they appear to be transmitting periodically, but 
they don't form a network. I suspect that the address of the nodes has 
changed, but I have not checked this yet. Deluge works fine for other 
programs such as Blink.


Thanks,

Simon

Val Zimmer wrote:

Hi,

Running the Delta code and the trawler application w/ a mix of Tmote 
Sky and Tmote Invent motes, we found that every time we reloaded one 
of the Images (e.g. reloaded Delta), the node numbers were set to #1, 
across the entire network, such that the Trawler application is no 
longer able to see the nodes.  (This could only be restored by taking 
each mote and physically reloading the Delta software (make tmote 
reinstall,3 - for example)).


Is this an artifact of the delta image - i.e. was the image originally 
written with the default #1 so that rebooting would cause this issue 
(and then the reinstall would be entirely separate), or is this 
something that would always happen?  If the latter, might this be 
fixed in the near future?

Thanks - Val
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help



--
Simon WillisBE(CompSys)(Hons)-BSc   
PhD Candidate   Tel: (07) 47814865
Electrical  Computer Engineering   Fax: (07) 47815177
James Cook University   Mob: 0403653055
Townsville, QLD 4811Email: [EMAIL PROTECTED]
Web: http://eng.jcu.edu.au

___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help