Re: Topband: STEERING

2014-02-20 Thread Tom W8JI
I have a MFJ-1025 and I have seen some past post about using this unit for 
direction steering using two separate antennas.  I am installing a new two 
wire beverage and wonder if there would be any steering possible using the 
two inputs from the beverage into the MFJ.  I had to ask




If you model a single wire Beverage with two sources and no termination, and 
step the termination through all levels and phases, you will see exactly 
what is possible.


The level will control null depth, the phase will control null position. 
Null movement is limited, but you can move nulls around a little bit. You 
can get deep nulls if the level is right, but they do not steer like people 
think or old articles claim.


For example a 1 wl Beverage likes roughly around 160 degrees phase shift 
(-30 if you flip phase by transposing wire directions) and about a 1.4:1 
current ratio from feedpoint to termination. You can make the pattern deeper 
or more shallow, and move nulls around near the back, but it basically stays 
about the same overall pattern with varying null depths in the same general 
areas.


This isn't saying it isn't useful to move the nulls around a little, but 
don't expect to actually steer or narrow the beam. That would take two 
antenna with some significant physical spacing in wavelengths. 


_
Topband Reflector Archives - http://www.contesting.com/_topband


Topband: Low band noise

2014-02-20 Thread Bruce
Thank you for those who emailed information. They basically thought the larger 
windmill arrays did not generate much noise. One test, checking all bands, was 
from a mobile K3 with a 9 foot whip antenna.  Unless the whip was loaded to 1.8 
Mhz it may not pick up much noise at one mile. The most probable windmill 
installation noise source is the inverter.

Smaller home/farm  1 phase  type may give off more wideband noise. Some are 
using transformer-less inverters.

Noise is ever increasing in many areas. There is a need to monitor noise 
sources, and installing more directive receiving antennas. 

http://www.solacity.com/connections.htm

Watch the inverter video for more info. Highly informative.
http://www.power-one.com/renewable-energy/products/solar/string-inverters/aurora-uno-single-phase/pvi-30363842-north-america/series


I have no affiliation with any of the companies.
73-Bruce-K1FZ 


Getting noise from my NW direction. Does not seem to be local. Started 
wondering what, at distance,  could be causing it. At times it seems to have a 
rhythm like a motor.

There are a lot of power generating wind mills showing up.  Checking through 
Google, they generate DC and convert to  3 phase AC it with an inverter. The 
frequency and phase of the inverter is controlled with a sample from the power 
grid. 

Bruce-K1FZ
www.qsl.net/k1fz/beveragenotes.html
www.qsl.net/k1fz/pennantnotes.html
_
Topband Reflector Archives - http://www.contesting.com/_topband


Topband: 160 condx....2nd CME impact

2014-02-20 Thread Bruce

http://www.spaceweather.com/






73
Bruce-K1FZ
www.qsl.net/k1fz/pennantnotes.html  Flag, Pennant, Delta receiving antenna info.
_
Topband Reflector Archives - http://www.contesting.com/_topband


Topband: VP9/G7VJR

2014-02-20 Thread wb6rse1
Michael, G7VJR, is now QRV from VP9. He will be on 160 later. He's running 100 
watts.

Great CW op.

GL - Steve WB6RSE
_
Topband Reflector Archives - http://www.contesting.com/_topband


Re: Topband: VP9/G7VJR

2014-02-20 Thread Jim Bennett
Yep, I just worked him with my KX3/KPA500 (150 watts to a 45 foot high doublet) 
on 17 meter CW. Coming in nicely here in California this morning.

Jim / W6JHB



On   Thursday, Feb 20, 2014, at  Thursday, 11:27 AM, wb6r...@mac.com wrote:

 Michael, G7VJR, is now QRV from VP9. He will be on 160 later. He's running 
 100 watts.
 
 Great CW op.
 
 GL - Steve WB6RSE
 _
 Topband Reflector Archives - http://www.contesting.com/_topband

_
Topband Reflector Archives - http://www.contesting.com/_topband


Re: Topband: 160 condx....2nd CME impact

2014-02-20 Thread Charlie Cunningham
Interesting!  Thanks for sharing, Bruce!

73,
Charlie, K4OTV

-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Bruce
Sent: Thursday, February 20, 2014 2:16 PM
To: topband@contesting.com
Subject: Topband: 160 condx2nd CME impact


http://www.spaceweather.com/






73
Bruce-K1FZ
www.qsl.net/k1fz/pennantnotes.html  Flag, Pennant, Delta receiving antenna
info.
_
Topband Reflector Archives - http://www.contesting.com/_topband

_
Topband Reflector Archives - http://www.contesting.com/_topband