Topband: CABLE AND CONNECTORS

2012-01-03 Thread Bill and Liz McHugh
It goes without saying that if one chooses to use cheap imported cable which 
has not been scoped then all bets are off.  My earlier comments regarding 
RG-213 and RG-6 were based on the assumption that one would choose a reputable 
brand of cable (for which one pays a premium).

Bill VE3NH 
___
UR RST IS ... ... ..9 QSB QSB - hw? BK


Re: Topband: CABLE AND CONNECTORS

2012-01-03 Thread Bill Wichers
I would add that sweep tested doesn't necessarily mean the cable is
good quality. I've seen some sweep tested RG6 made for satellite use
that had maybe a 10% braid. I considered it to be horrible quality and
would never use it. 

Keeping with a known brand that has a history of making a quality
product is probably more important than looking to see if the cable has
been tested, at least in the case of RG6...

-Bill KB8WYP

 -Original Message-
 From: topband-boun...@contesting.com [mailto:topband-
 boun...@contesting.com] On Behalf Of Bill and Liz McHugh
 Sent: Tuesday, January 03, 2012 11:07 AM
 To: topband@contesting.com
 Subject: Topband: CABLE AND CONNECTORS
 
 It goes without saying that if one chooses to use cheap imported cable
 which has not been scoped then all bets are off.  My earlier comments
 regarding RG-213 and RG-6 were based on the assumption that one would
 choose a reputable brand of cable (for which one pays a premium).
 
 Bill VE3NH
 ___
 UR RST IS ... ... ..9 QSB QSB - hw? BK
___
UR RST IS ... ... ..9 QSB QSB - hw? BK


Re: Topband: CABLE AND CONNECTORS

2012-01-03 Thread chacuff
Times LMR-400 is an RG-213 equivilent.  PL-259's can be put on both and will 
need to be properly done.  (no folding back the braid and screwing them 
on..not wild about the new fangled crimping device either)  Silver plated 
connecters are much easier to install when it comes to soldering the braid 
properly.

Times also makes a direct burial version of the LMR-400 ending with a DB 
designation.  It has a flooded braid that will inhibit moisture intrusion 
should the jacket be nicked.  Not really much harder to put connectors on 
either.  Clean the stripped braided end with some good electronic cleaner or 
alcohol and it should be good to go.

Cecil
K5DL
- Original Message - 
From: Bill and Liz McHugh ma...@isp.ca
To: topband@contesting.com
Sent: Tuesday, January 03, 2012 10:06 AM
Subject: Topband: CABLE AND CONNECTORS


 It goes without saying that if one chooses to use cheap imported cable 
 which has not been scoped then all bets are off.  My earlier comments 
 regarding RG-213 and RG-6 were based on the assumption that one would 
 choose a reputable brand of cable (for which one pays a premium).

 Bill VE3NH
 ___
 UR RST IS ... ... ..9 QSB QSB - hw? BK 

___
UR RST IS ... ... ..9 QSB QSB - hw? BK