[Touch-packages] [Bug 1370376] Re: Can't receive MMS despite ability to send

[Tomas Öqvist]

After looking into the apns-conf.xml on the device, I previously noted
that settings for Tele2 Sweden did not quite match the APN settings for
Nexus 4 recommended by the carrier. Strangely enough, sending MMS still
works. See settings comparison below, the most notable differences being
MNC and APN type. I did try changing the APN settings and putting an
edited copy of apns-conf.xml in /custom/etc/ earlier, but that didn't
make any difference for receiving MMS.

Ubuntu Touch RTM:
http://mmsc.tele2.se";
  mmsproxy="130.244.202.30"
  mmsport="8080"
  type="mms"
  mvno_match_data="Tele2"
  mvno_type="spn"
  />

Tele2 Sweden MMS suggested settings for Nexus 4:
Name - Tele2 
APN - 4g.tele2.se 
Proxy - TBD (not determined)
Port - TBD 
Username - TBD 
Password - TBD 
MMSC - http://mmsc.tele2.se 
MMS proxy - 130.244.202.30 
MMS port - 8080 
MCC - 240 
MNC - 07 
Authentication type - TBD 
APN type - default, supl, mms 
APN protocol - IPv4 
APN roaming protocol - IPv4

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1370376

Title:
  Can't receive MMS despite ability to send

Status in “network-manager” package in Ubuntu:
  New
Status in “nuntium” package in Ubuntu:
  New

Bug description:
  I can send MMS (and they actually come through to the recipient), but
  I can't receive MMS. I am not sure if this is an APN settings issue,
  but I would have thought it either worked both ways or not at all.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1370376/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358750] Re: [Video aggregator] New videos are added to the video scope only after reboot

[James Henstridge]

** Branch linked: lp:~jamesh/mediascanner2/udisk-mounts

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scope-mediascanner
in Ubuntu.
https://bugs.launchpad.net/bugs/1358750

Title:
  [Video aggregator] New videos are added to the video scope only after
  reboot

Status in Media Scanner v2:
  New
Status in “unity-scope-mediascanner” package in Ubuntu:
  New

Bug description:
  New videos are added to the video scope only after reboot. They should
  be added immediately.

To manage notifications about this bug go to:
https://bugs.launchpad.net/mediascanner2/+bug/1358750/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1318360] Re: Poor microphone quality (mako)

[Tomas Öqvist]

I guess that Android applies some kind of filter to prevent the
distortion somehow picked up by the mic. Sound gets worse if I speak in
a louder voice and the output at the other end is apparantly very loud
also. As Nexus 4 is still the main phone used for Ubuntu Touch, I
believe the platform would benefit greatly if this issue could be solved
sooner than later.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1318360

Title:
  Poor microphone quality (mako)

Status in “pulseaudio” package in Ubuntu:
  Confirmed

Bug description:
  After months of complaints from people talking to me on the phone
  (mako ubuntu touch), I finally got around to use multiROM to dual boot
  Ubuntu Touch and Android. Several people can confirm that there is a
  noticable difference in terms of sound/microphone quality between
  Android and UT in phone calls. With UT, my voice gets distorted to an
  extent that person at the other end have real difficulties to hear
  what I am saying, while with Android call quality is much better with
  no distortion.

  I have had a suspicion for a long time that this might be a software
  and not a hardware issue. After trying Android and Ubuntu on the same
  hardware I believe this suspicion is proved correct. This issue has
  persisted in all the builds I have tried since at least the beginning
  of the year, but probably longer. I am now at r17 of Utopic.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1318360/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374215] Re: Can't invoke UnlockAllModems() twice via dbus

[Antti Kaijanmäki]

Thanks! The UnlockAllModems() is a bit buggy right now and that's the
reason it's not enabled on the greeter right now. I will get to this as
soon as possible (before RTM).

** Changed in: indicator-network
   Status: New => Triaged

** Changed in: indicator-network (Ubuntu)
   Status: New => Triaged

** Changed in: indicator-network
 Assignee: (unassigned) => Antti Kaijanmäki (kaijanmaki)

** Changed in: indicator-network (Ubuntu)
 Assignee: (unassigned) => Antti Kaijanmäki (kaijanmaki)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-network in
Ubuntu.
https://bugs.launchpad.net/bugs/1374215

Title:
  Can't invoke UnlockAllModems() twice via dbus

Status in Network Menu:
  Triaged
Status in “indicator-network” package in Ubuntu:
  Triaged

Bug description:
  Dialer-app now calls UnlockAllModems() when needed via dbus, but it
  only works for the first time. If I call the method once and then
  cancel the sim unlock screen, I can't call it again. The method just
  returns and the sim unlock screen never appears.

  Also, I noticed that after that sometimes the contents of the network
  indicator simply disappears as if the service was not running, but it
  in fact is. No crashes are observed.

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-network/+bug/1374215/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374082] Re: no API to unlock a specific sim

[Antti Kaijanmäki]

Is this OK for post RTM OTA  update or do we need it _now_?

** Changed in: indicator-network
   Status: New => Triaged

** Changed in: indicator-network (Ubuntu)
   Status: New => Triaged

** Changed in: indicator-network
 Assignee: (unassigned) => Antti Kaijanmäki (kaijanmaki)

** Changed in: indicator-network (Ubuntu)
 Assignee: (unassigned) => Antti Kaijanmäki (kaijanmaki)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-network in
Ubuntu.
https://bugs.launchpad.net/bugs/1374082

Title:
  no API to unlock a specific sim

Status in Network Menu:
  Triaged
Status in “indicator-network” package in Ubuntu:
  Triaged

Bug description:
  In dialer-app on dual sim phones users will be given an option to unlock a 
specific modem.
  The current api only supports unlocking all modems at once: 
UnlockAllModems(). We need a way to invoke the unlock screen to a specific 
modem, like UnlockModem(objectPath).

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-network/+bug/1374082/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369474] Re: Conversation tagged with wrong contact after sending sms

[Tomas Öqvist]

This is a nasty bug, because I am only encountering it  once in a while
and so far I haven't been able to determine when it occurs other than
just sending an sms to somebody in my phone book. I have seen it with a
number of different contacts, whom have no phone numbers in common.
Sometimes I get the name of a contact that is no 3 or 4 in the chat
list, sometimes it "kids" me with the no 2 on the list. I just sent a
text and did not encounter the bug. I will monitor this further and try
to see if it possible to see any kind of pattern.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1369474

Title:
  Conversation tagged with wrong contact after sending sms

Status in “messaging-app” package in Ubuntu:
  Incomplete

Bug description:
  Mako running MultiROM with #239

  1. Enter an existing conversation
  2. Send an sms
  3. Look at the top of the screen, which have now changed to another contact 
than in the original conversation.

  Gives me the creeps when it looks as if I sent a text to the wrong
  recipient, until I find out that the messaging app is only "kidding".

  Going back, the intended conversation shows at the top of the
  conversations as it should, and reentering that conversation also
  shows the correct contact.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1369474/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374288] [NEW] upstart package should also include a systemd unit for failsafe boot

[Dylan Borg]

Public bug reported:

Currently the failsafe boot service is only shipped as an upstart job.
Since in utopic there is an ongoing transition to systemd there is a
race between upstart and systemd when it comes to networking. Network
manager may be getting started by systemd (package has a systemd unit
inside) which is not allowing events required by failsafe boot to arrive
to it so that it aborts the extra 2 minutes hang as it is running on
upstart (and cannot run on systemd).

** Affects: upstart (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to upstart in Ubuntu.
https://bugs.launchpad.net/bugs/1374288

Title:
  upstart package should also include a systemd unit for failsafe boot

Status in “upstart” package in Ubuntu:
  New

Bug description:
  Currently the failsafe boot service is only shipped as an upstart job.
  Since in utopic there is an ongoing transition to systemd there is a
  race between upstart and systemd when it comes to networking. Network
  manager may be getting started by systemd (package has a systemd unit
  inside) which is not allowing events required by failsafe boot to
  arrive to it so that it aborts the extra 2 minutes hang as it is
  running on upstart (and cannot run on systemd).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1374288/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373493] Re: Does not handle token expiration well

[Launchpad Bug Tracker]

This bug was fixed in the package unity-scope-click -
0.1.1+14.10.20140925-0ubuntu1

---
unity-scope-click (0.1.1+14.10.20140925-0ubuntu1) 14.09; urgency=low

  [ Rodney Dawes ]
  * Invalidate the local token and show login error when token is
invalid. (LP: #1373493)
 -- Ubuntu daily releaseThu, 25 Sep 2014 
13:44:55 +

** Changed in: unity-scope-click (Ubuntu RTM)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scope-click in
Ubuntu.
https://bugs.launchpad.net/bugs/1373493

Title:
  Does not handle token expiration well

Status in “unity-scope-click” package in Ubuntu:
  In Progress
Status in “unity-scope-click” package in Ubuntu RTM:
  Fix Released

Bug description:
  When revoking the OAuth token on the server, the scope does not handle
  it very well. When attempting to install a free application, a
  "Download or install failed." error is immediately displayed, rather
  than a login error or dialog.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1373493/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1062465] Re: tracker-miner-fs crashed with SIGSEGV in lookup_iface_entry_I()

[Savio Sosero]

** Tags removed: quantal
** Tags added: utopic

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to tracker in Ubuntu.
https://bugs.launchpad.net/bugs/1062465

Title:
  tracker-miner-fs crashed with SIGSEGV in lookup_iface_entry_I()

Status in “tracker” package in Ubuntu:
  Fix Released

Bug description:
  tracker crashed while I was cleaning up my homedir.

  This bug has already been reported in previous Ubuntu releases, but
  I'm reporting this one because it occurred in quantal with more recent
  package versions.  I will merge them when apport has retraced this
  one.

  ProblemType: Crash
  DistroRelease: Ubuntu 12.10
  Package: tracker-miner-fs 0.14.1-1ubuntu5
  ProcVersionSignature: Ubuntu 3.5.0-17.16-lowlatency 3.5.5
  Uname: Linux 3.5.0-17-lowlatency i686
  ApportVersion: 2.6.1-0ubuntu1
  Architecture: i386
  Date: Fri Oct  5 19:44:34 2012
  EcryptfsInUse: Yes
  ExecutablePath: /usr/lib/tracker/tracker-miner-fs
  ProcCmdline: /usr/lib/tracker/tracker-miner-fs
  SegvAnalysis:
   Segfault happened at: 0xb73f187a :mov
(%esi),%eax
   PC (0xb73f187a) ok
   source "(%esi)" (0x8a8a8a8a) not located in a known VMA region (needed 
readable region)!
   destination "%eax" ok
  SegvReason: reading unknown VMA
  Signal: 11
  SourcePackage: tracker
  StacktraceTop:
   lookup_iface_entry_I (iface_node=0x81a7450, entries=0x8a8a8a8a) at 
/build/buildd/glib2.0-2.34.0/./gobject/gtype.c:564
   type_lookup_iface_vtable_I (node=0x857bcc0, 
iface_node=iface_node@entry=0x81a7450, vtable_ptr=vtable_ptr@entry=0x0) at 
/build/buildd/glib2.0-2.34.0/./gobject/gtype.c:619
   g_type_check_instance_is_a (type_instance=0xa45d710, iface_type=135951440) 
at /build/buildd/glib2.0-2.34.0/./gobject/gtype.c:3964
   ?? () from /usr/lib/libtracker-miner-0.14.so.0
   ?? () from /usr/lib/libtracker-miner-0.14.so.0
  Title: tracker-miner-fs crashed with SIGSEGV in lookup_iface_entry_I()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm admin audio cdrom dialout dip floppy fuse kvm libvirtd 
lpadmin plugdev pulse pulse-access scanner staff video

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/tracker/+bug/1062465/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1214034] Re: Implement API for querying SSL status and certificate information and signalling SSL errors to the embedder

[Olivier Tilloy]

** Changed in: webbrowser-app
   Status: In Progress => Fix Released

** Changed in: webbrowser-app (Ubuntu)
 Assignee: Olivier Tilloy (osomon) => (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1214034

Title:
  Implement API for querying SSL status and certificate information and
  signalling SSL errors to the embedder

Status in Oxide Webview:
  Fix Released
Status in Web Browser App:
  Fix Released
Status in “webbrowser-app” package in Ubuntu:
  Fix Released

Bug description:
  The webview should expose an API for querying SSL status and
  certificate information and signalling SSL errors to the embedder.
  This is required in order to present something other than a blank page
  when we encounter verification issues

To manage notifications about this bug go to:
https://bugs.launchpad.net/oxide/+bug/1214034/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1300133] Re: Generate ED25519 host keys on upgrade

[Charles Peters II]

# ssh-keygen -A
ssh-keygen: generating new host keys: RSA1 ED25519 

I don't think we want to add the old RSA1 keys, just the new ED25519.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssh in Ubuntu.
https://bugs.launchpad.net/bugs/1300133

Title:
  Generate ED25519 host keys on upgrade

Status in “openssh” package in Ubuntu:
  Confirmed

Bug description:
  openssh (1:6.5p1-1) unstable; urgency=medium
...
* Generate ED25519 host keys on fresh installations.  Upgraders who wish
  to add such host keys should manually add 'HostKey
  /etc/ssh/ssh_host_ed25519_key' to /etc/ssh/sshd_config and run
  'ssh-keygen -q -f /etc/ssh/ssh_host_ed25519_key -N "" -t ed25519'.
 ...
  -- Colin Watson   Mon, 10 Feb 2014 14:58:26 +

  Most users and many administrators are not going to notice the new
  host key capabilities when it is buried in a changelog.  We should at
  least give them a obvious hint about it.

  Even better would be to prompt the user to generate the keys with a
  debconf question like was recently done with the "Change to
  "PermitRootLogin without-password"".

  I would like to label this as a security vulnerability, but that may
  be a bit over the top, it would be a security improvement!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1300133/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1289730] Re: systemd-udev fails to execute alsactl during start-up if /usr and/or /var are separate volumes

[z_mikowski]

I have confirmed that the solution proposed in comment #6 completely
resolves this issue.  Can this be included in 14.10 perhaps?

** Changed in: alsa-utils (Ubuntu)
   Status: Expired => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1289730

Title:
  systemd-udev fails to execute alsactl during start-up if /usr and/or
  /var are separate volumes

Status in “alsa-utils” package in Ubuntu:
  Confirmed

Bug description:
  During system startup systemd-udev will print the following error
  messages:

  [   15.089778] systemd-udevd[683]: failed to execute '/usr/sbin/alsactl' 
'/usr/sbin/alsactl -E HOME=/var/run/alsa restore 0': No such file or directory
  [   15.090130] systemd-udevd[684]: failed to execute '/usr/sbin/alsactl' 
'/usr/sbin/alsactl -E HOME=/var/run/alsa restore 1': No such file or directory

  alsactl is present:

  $ which alsactl
  /usr/sbin/alsactl

  but on a separate partition:
  $ df -h /usr/sbin/alsactl 
  DateisystemGröße Benutzt Verf. Verw% Eingehängt auf
  /dev/mapper/scaleo-usr   12G6,6G  4,1G   62% /usr

  $ df -h /var
  DateisystemGröße Benutzt Verf. Verw% Eingehängt auf
  /dev/mapper/scaleo-var  7,3G2,5G  4,4G   37% /var

  This suggests that systemd-udev is called before all local partitions
  have been mounted.

  $ lsb_release -rd
  Description:  Ubuntu Trusty Tahr (development branch)
  Release:  14.04

  $ apt-cache policy udev
  udev:
Installiert:   204-5ubuntu13
Installationskandidat: 204-5ubuntu13
Versionstabelle:
   *** 204-5ubuntu13 0
  500 http://de.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
  100 /var/lib/dpkg/status

  Kind regards,
Dominik

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-utils/+bug/1289730/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1289730] Re: systemd-udev fails to execute alsactl during start-up if /usr and/or /var are separate volumes

[z_mikowski]

Hey gang, I'm still seeing this on 14.04.  I'm sorry there hasn't been
"activity" for 60 days, but this bug is still very real and annoying.
Can we reopen it?

This shouldn't be happening, and it is disconcerting for less
experienced users who think their system is broken when (apparently) it
really isn't.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1289730

Title:
  systemd-udev fails to execute alsactl during start-up if /usr and/or
  /var are separate volumes

Status in “alsa-utils” package in Ubuntu:
  Confirmed

Bug description:
  During system startup systemd-udev will print the following error
  messages:

  [   15.089778] systemd-udevd[683]: failed to execute '/usr/sbin/alsactl' 
'/usr/sbin/alsactl -E HOME=/var/run/alsa restore 0': No such file or directory
  [   15.090130] systemd-udevd[684]: failed to execute '/usr/sbin/alsactl' 
'/usr/sbin/alsactl -E HOME=/var/run/alsa restore 1': No such file or directory

  alsactl is present:

  $ which alsactl
  /usr/sbin/alsactl

  but on a separate partition:
  $ df -h /usr/sbin/alsactl 
  DateisystemGröße Benutzt Verf. Verw% Eingehängt auf
  /dev/mapper/scaleo-usr   12G6,6G  4,1G   62% /usr

  $ df -h /var
  DateisystemGröße Benutzt Verf. Verw% Eingehängt auf
  /dev/mapper/scaleo-var  7,3G2,5G  4,4G   37% /var

  This suggests that systemd-udev is called before all local partitions
  have been mounted.

  $ lsb_release -rd
  Description:  Ubuntu Trusty Tahr (development branch)
  Release:  14.04

  $ apt-cache policy udev
  udev:
Installiert:   204-5ubuntu13
Installationskandidat: 204-5ubuntu13
Versionstabelle:
   *** 204-5ubuntu13 0
  500 http://de.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
  100 /var/lib/dpkg/status

  Kind regards,
Dominik

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-utils/+bug/1289730/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373807] Re: Unity8 freeze (caused by shell plugin) after performing OA workflow

[Marcus Tomlinson]

** Changed in: unity-scopes-shell
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1373807

Title:
  Unity8 freeze (caused by shell plugin) after performing OA workflow

Status in QML plugin for Scopes:
  Fix Released
Status in “unity-scopes-shell” package in Ubuntu:
  Fix Released

Bug description:
  From Kyle:

  Today, I took a another look the new support for online accounts for
  scopes (since my email of last week).

  Problem is that after logging into the facebook account in OA settings
  and then authenticating the app there, creating the
  unity::scopes::OnlineAccountClient object *every time after that*
  causes the code to not return: the scope hangs.

  In my query::run(), right at the top,  I have this:

   qDebug() << "=== query run()";
   qDebug() << "=== query run() 1";
   unity::scopes::OnlineAccountClient 
oa_client("com.canonical.scopes.fbphotos_fbphotos", "fbphotos", "facebook");
   qDebug() << "=== query run() 2";

  Until I authorize the app in OA > facebook account > settings, I get
  this:

  === query run() 1
  === query run() 2

  At this point, I do see the "Log In" reply displayed in the scope, and
  things are looking good. So I go to OA and authorize the app.

  But after this, we never return from the instantiation of the
  oa_client, and I see this *only*:

  === query run() 1

  Seems to hang on 
  unity::scopes::OnlineAccountClient oa_client(...)

  Any thoughts?

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity-scopes-shell/+bug/1373807/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Mathew Hodson]

** Branch linked: lp:ubuntu/trusty-security/bash

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1365769] Re: [pulseaudio-discuss] [V4 PATCH] module-switch-on-connect: add an argument for conditionally connecting

[Raymond]

>> >>
>> >> >
>> >> > On a machine without fixed connecting audio devices like internal
>> >> > microphone or internal speaker, and when there is no external audio
>> >> > devices plugging in, the default source/sink is
alsa_input/alsa_output
>> >> > and there is no input devices/output devices listed in the gnome
>> >> > sound-setting.
>>
>> https://launchpadlibrarian.net/184055917/PulseList.txt
>>
>> Seem line in is active port when all ports are not available
>> Pulseaudio won't switch away from line in but gnome won't show line in
since it is not plugged
>>
>> ports:
>> analog-input-microphone-front: Front Microphone (priority 8500, latency
offset 0 usec, available: no)
>> properties:
>> device.icon_name = "audio-input-microphone"
>> analog-input-microphone-rear: Rear Microphone (priority 8200, latency
offset 0 usec, available: no)
>> properties:
>> device.icon_name = "audio-input-microphone"
>> analog-input-linein: Line In (priority 8100, latency offset 0 usec,
available: no)
>> properties:
>>
>> active port: 
>
> Yes, in this situation, the default-source->active_port->available=no, if
you use this module and pass "only_from_unavailable=yes", when connect
bluetooth headset, the default source will automatically switch to
bluez-source.
>
> In this situation, if you plug something in the line-in jack, the
default-source->active_port-available=yes, and if you pass
"only_from_unavailable=yes", the default source will not switch.
>>
>> https://launchpadlibrarian.net/184417469/alsa2.txt
>>
>>

>I do not have the hda-jack-sense-test command.

>I  was not aware that I was overriding the pcm.default. Is it worth
changing this to see if the bug goes away? How would I do that?

Seem upgrade does not remove previous conf

System wide config file (/etc/asound.conf)

## /etc/asound.conf ##
pcm.!default {
   type plug
   slave.pcm "asymed"
}

pcm.asymed {
   type asym
   playback.pcm "swmixer"
   capture.pcm "mixin"
}

pcm.dsp0 {
   type plug
   slave.pcm "asymed"
}

pcm.swmixer {
   type dmix
   ipc_key 1234
   slowptr yes
   slave {
   pcm "hw:0,0"
   period_time 0
   period_size 1024
   buffer_size 4096
   rate 48000
   }
}

ctl.dmixer {
   type hw
   card 0
}

pcm.mixin {
   type dsnoop
   ipc_key 5978293 # must be unique for all dmix plugins
   ipc_key_add_uid yes
   slave {
   pcm "hw:0,0"
   channels 2
   period_size 1024
   buffer_size 4096
   rate 48000
   periods 0
   period_time 0
   }
   bindings {
   0 0
   0 1
   }
}


> Do I need to build my own version of the kernel to disable jack detection?

https://launchpad.net/~diwic/+archive/ubuntu/hda

Install snd-hda-tools and run hda-jack-sense-test to find out whether rear
Mic Jack , line in and front Mic report correct Jack state when you plugged
and unplugged

If it work in windows, you may need to file an upstream bug report

If rear Mic Jack cannot report correct Jack state,

The workaround is disable Jack detection of rear Mic jack by hda-jack-
retask

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1365769

Title:
  [G41MT-S2P, VIA VT2020, Pink Mic, Rear] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Incomplete

Bug description:
  The problem is that the microphone is not detected after a reboot.  As
  a result, some applications cannot get sound from the microphone.

  The Input tab of the Sound window lists no device.

  I have a workround which is to disconnect and then connect the
  microphone after I have logged in.

  Interestingly, the audacity application can access the microphone when
  the system says that the device does not exist

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.2.0-67.101-generic 3.2.60
  Uname: Linux 3.2.0-67-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  tim2060 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Sep  5 00:12:39 2014
  InstallationDate: Installed on 2011-07-29 (1133 days ago)
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaRecordingTest: ALSA recording test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  tim2060 F pulseaudio
  Symptom_Jack: Pink Mic, Rear
  Symptom_Type: No sound at all
  Title: [G41MT-S2P, VIA VT2020, Pink Mic, Rear] No sound a

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Mathew Hodson]

Bug #1373781 is the one listed on the CVE page,
http://people.canonical.com/~ubuntu-security/cve/2014/CVE-2014-7169

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  Invalid
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  Invalid

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370644] Re: unity8-autopilot device unlock seems racy

[Paul Larson]

Any ideas on this? We're seeing it on some of the MP testing jobs too it
seems.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1370644

Title:
  unity8-autopilot device unlock seems racy

Status in “unity8” package in Ubuntu:
  New

Bug description:
  In some test runs, we see unlocking fail with:
  I: Unlock failed, script output: 'Error: 
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name 
com.canonical.UnityGreeter was not provided by any .service files

  It's not reliably reproducible, but probably happens at least once a
  day for us in CI

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1370644/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1306507] Re: 网络连接默认名称"Wired connection 1"-应汉化 - Network indicator is not localizing connection names

[Anthony Wong]

** Tags added: l10n

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1306507

Title:
  网络连接默认名称"Wired connection 1"-应汉化 - Network indicator is not localizing
  connection names

Status in Ubuntu Translations:
  New
Status in Ubuntu Kylin:
  New
Status in “network-manager” package in Ubuntu:
  New

Bug description:
  系统测试版本：UK14.04-Daily-0410-i386
  网络连接默认名称"Wired connection 1"-应汉化，应和新建网络的默认名称一样：“有线连接 *”。

  --

  Network indicator is not localizing connection names

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-translations/+bug/1306507/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Marc Deslauriers]

Fumihito YOSHIDA (hito),

We are awaiting comments from the upstream bash developer about the OOB
memory fixes, and the variable isolation hardening. We will address
those in a later bash update.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374249] Re: Scrolling works erratically when sound center balance is off-center

[Chow Loong Jin]

Dragging the handle on the sound menu seems to indicate that it keeps
trying to go down instead of following the mouse. Also, when it hits 0,
the sound center balance is reset to 0 (right in the center).

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-sound in Ubuntu.
https://bugs.launchpad.net/bugs/1374249

Title:
  Scrolling works erratically when sound center balance is off-center

Status in “indicator-sound” package in Ubuntu:
  New

Bug description:
  When the center balance is adjusted to the right, scrolling on the
  volume icon in the panel produces erratic results. The same thing
  happens when trying to adjust the volume in the sound menu. The volume
  buttons still function correctly though.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1374249/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374249] [NEW] Scrolling works erratically when sound center balance is off-center

[Chow Loong Jin]

Public bug reported:

When the center balance is adjusted to the right, scrolling on the
volume icon in the panel produces erratic results. The same thing
happens when trying to adjust the volume in the sound menu. The volume
buttons still function correctly though.

** Affects: indicator-sound (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-sound in Ubuntu.
https://bugs.launchpad.net/bugs/1374249

Title:
  Scrolling works erratically when sound center balance is off-center

Status in “indicator-sound” package in Ubuntu:
  New

Bug description:
  When the center balance is adjusted to the right, scrolling on the
  volume icon in the panel produces erratic results. The same thing
  happens when trying to adjust the volume in the sound menu. The volume
  buttons still function correctly though.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1374249/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Mathew Hodson]

Should we mark this report as a duplicate of bug #1373781?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  Invalid
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  Invalid

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Marc Deslauriers]

** Changed in: bash (Ubuntu Utopic)
   Status: In Progress => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  Invalid
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  Invalid

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1169881] Re: Please add gnome-gmail to ubuntu-email

[Launchpad Bug Tracker]

** Branch linked: lp:ubuntu/utopic-proposed/apparmor

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor in Ubuntu.
https://bugs.launchpad.net/bugs/1169881

Title:
  Please add gnome-gmail to ubuntu-email

Status in AppArmor Linux application security framework:
  Fix Committed
Status in “apparmor” package in Ubuntu:
  Fix Committed

Bug description:
  I found I was unable to click on a mailto: link in evince, and the
  reason was that I use gnome-gmail as my mailer program. Please add
  gnome-gmail to the ubuntu-email abstraction. I have done this myself,
  and it solves the problem; my ubuntu-email file is attached to this
  report.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: apparmor 2.8.0-0ubuntu5
  ProcVersionSignature: Ubuntu 3.5.0-25.39-generic 3.5.7.4
  Uname: Linux 3.5.0-25-generic x86_64
  ApportVersion: 2.6.1-0ubuntu10
  Architecture: amd64
  Date: Wed Apr 17 09:55:28 2013
  InstallationDate: Installed on 2011-10-14 (550 days ago)
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  MarkForUpload: True
  ProcKernelCmdline: BOOT_IMAGE=/vmlinuz-3.5.0-25-generic 
root=UUID=3f1df709-5d4e-4a93-8844-6cf574c52f87 ro rootflags=subvol=@ quiet 
splash vt.handoff=7
  SourcePackage: apparmor
  UpgradeStatus: Upgraded to quantal on 2012-10-20 (179 days ago)
  mtime.conffile..etc.apparmor.d.abstractions.ubuntu.email: 
2013-04-17T09:52:50.846222

To manage notifications about this bug go to:
https://bugs.launchpad.net/apparmor/+bug/1169881/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373555] Re: please restrict signal, ptrace and unix mediation to the container

[Launchpad Bug Tracker]

** Branch linked: lp:ubuntu/utopic-proposed/apparmor

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor in Ubuntu.
https://bugs.launchpad.net/bugs/1373555

Title:
  please restrict signal, ptrace and unix mediation to the container

Status in “apparmor” package in Ubuntu:
  Fix Committed
Status in “lxc” package in Ubuntu:
  Triaged

Bug description:
  Right now the container policy uses bare rules for ptrace and signal.
  We should refine these rules to be container specific and add unix
  rules to do the same. Obviously, namespaces are intended to block
  these accesses in and of themselves, but this add an incremental
  improvement and security in depth in case something goes wrong there.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1373555/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1365769] Re: [pulseaudio-discuss] [V4 PATCH] module-switch-on-connect: add an argument for conditionally connecting

[Hui Wang]

On 09/26/2014 12:13 AM, Raymond Yau wrote:
>
>
> >>
> >> >
> >> > On a machine without fixed connecting audio devices like internal
> >> > microphone or internal speaker, and when there is no external audio
> >> > devices plugging in, the default source/sink is 
> alsa_input/alsa_output
> >> > and there is no input devices/output devices listed in the gnome
> >> > sound-setting.
>
> https://launchpadlibrarian.net/184055917/PulseList.txt
>
> Seem line in is active port when all ports are not available
> Pulseaudio won't switch away from line in but gnome won't show line in 
> since it is not plugged
>
> ports:
> analog-input-microphone-front: Front Microphone (priority 8500, 
> latency offset 0 usec, available: no)
> properties:
> device.icon_name = "audio-input-microphone"
> analog-input-microphone-rear: Rear Microphone (priority 8200, latency 
> offset 0 usec, available: no)
> properties:
> device.icon_name = "audio-input-microphone"
> analog-input-linein: Line In (priority 8100, latency offset 0 usec, 
> available: no)
> properties:
>
> active port: 
>
Yes, in this situation, the default-source->active_port->available=no, 
if you use this module and pass "only_from_unavailable=yes", when 
connect bluetooth headset, the default source will automatically switch 
to bluez-source.

In this situation, if you plug something in the line-in jack, the 
default-source->active_port-available=yes, and if you pass 
"only_from_unavailable=yes", the default source will not switch.
>
> https://launchpadlibrarian.net/184417469/alsa2.txt
>
>
>
> ___
> pulseaudio-discuss mailing list
> pulseaudio-disc...@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1365769

Title:
  [G41MT-S2P, VIA VT2020, Pink Mic, Rear] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Incomplete

Bug description:
  The problem is that the microphone is not detected after a reboot.  As
  a result, some applications cannot get sound from the microphone.

  The Input tab of the Sound window lists no device.

  I have a workround which is to disconnect and then connect the
  microphone after I have logged in.

  Interestingly, the audacity application can access the microphone when
  the system says that the device does not exist

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.2.0-67.101-generic 3.2.60
  Uname: Linux 3.2.0-67-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  tim2060 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Sep  5 00:12:39 2014
  InstallationDate: Installed on 2011-07-29 (1133 days ago)
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaRecordingTest: ALSA recording test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  tim2060 F pulseaudio
  Symptom_Jack: Pink Mic, Rear
  Symptom_Type: No sound at all
  Title: [G41MT-S2P, VIA VT2020, Pink Mic, Rear] No sound at all
  UpgradeStatus: Upgraded to trusty on 2014-08-15 (20 days ago)
  dmi.bios.date: 12/31/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F1
  dmi.board.name: G41MT-S2P
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF1:bd12/31/2010:svnGigabyteTechnologyCo.,Ltd.:pnG41MT-S2P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnG41MT-S2P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: G41MT-S2P
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1365769/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Mathew Hodson]

Fixed in the new Ubuntu 14.04 package
https://launchpad.net/ubuntu/+source/bash/4.3-7ubuntu1.3

** Changed in: bash (Ubuntu Trusty)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1234339] Re: HUD ($APP_ID) errors printed on console

[Launchpad Bug Tracker]

This bug was fixed in the package ubuntu-ui-toolkit -
1.1.1262+14.10.20140922.2-0ubuntu1

---
ubuntu-ui-toolkit (1.1.1262+14.10.20140922.2-0ubuntu1) utopic; urgency=medium

  [ Leo Arias ]
  * Add logging to the textfield autopilot helpers Fixes LP: #1361750

  [ Zsombor Egri ]
  * Sheet header button space reservation made button presence
dependent. Fixes: LP: #1356636
  * Tweaks for ListItem dividers. Header margins and font weight
updated.
  * Exclude UbuntuColors dumped erroneously by qmlplugindump as it
would be a C++ type.
  * Organizer audible reminder wasn't updated when Alarm sound
changed.
  * Fix for a wrong Action reference
  * Removing dependency towards Unity.Action, ActionContext and
ActionManager QML API transferred to UI Toolkit.
Fixes LP: #1234339, LP: #1294298.
  * Fixing wrong path used in saving state file. Fixes LP: #1363112

  [ Loïc Molinari ]
  * Fixed parallel build, tests/unit_x11 had no rules.
Fixes LP: #1367850

  [ Zoltán Balogh ]
  * Updated test plan execution for RTM images and for new phablet
tools.
  * New test plan script

  [ Christian Dywan ]
  * Specify /sbin when calling initctl just like autopilot does.
  * Change gallery to use launcher to allow -touch argument.
  * Overflow panel button 0.5 opacity if disabled Fixes LP: #1369640
  * Open text context menu when pressing Menu key.
  * Do not open context menu when dragging.
  * Hide text input handlers while typing. Fixes LP: #1343821

  [ Albert Astals ]
  * Make the scaling provider respect requestedSizes with one of the
values 0

  [ Leo Arias ]
  * On autopilot tests launched by upstart, use the local modules
if running from a branch.

  [ Christian Dywan ]
  * Change gallery to use launcher to allow -touch argument.
 -- Ubuntu daily releaseMon, 22 Sep 2014 
15:52:55 +

** Changed in: ubuntu-ui-toolkit (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1234339

Title:
  HUD ($APP_ID) errors printed on console

Status in Ubuntu UI Toolkit:
  Fix Committed
Status in unity-action-api:
  Won't Fix
Status in “ubuntu-ui-toolkit” package in Ubuntu:
  Fix Released

Bug description:
  Simply running and exiting the system-settings app, results in the
  following errors/warnings printed to the console:

  unity::action::ActionManager::ActionManager(QObject*):
Could not determine application identifier. HUD will not work properly.
Provide your application identifier in $APP_ID environment variable.
  
file:///usr/lib/x86_64-linux-gnu/qt5/qml/Ubuntu/Components/ListItems/SingleControl.qml:59:
 Unable to assign [undefined] to bool

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: ubuntu-system-settings 0.1+13.10.20131002-0ubuntu1
  ProcVersionSignature: Ubuntu 3.11.0-11.17-generic 3.11.3
  Uname: Linux 3.11.0-11-generic x86_64
  ApportVersion: 2.12.5-0ubuntu1
  Architecture: amd64
  Date: Wed Oct  2 14:44:54 2013
  InstallationDate: Installed on 2012-10-21 (345 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  MarkForUpload: True
  SourcePackage: ubuntu-system-settings
  SystemImageInfo: Error: [Errno 2] No such file or directory: 
'system-image-cli'
  UpgradeStatus: Upgraded to saucy on 2013-08-07 (55 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ui-toolkit/+bug/1234339/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1214034] Re: Implement API for querying SSL status and certificate information and signalling SSL errors to the embedder

[Launchpad Bug Tracker]

This bug was fixed in the package webbrowser-app -
0.23+14.10.20140922-0ubuntu1

---
webbrowser-app (0.23+14.10.20140922-0ubuntu1) utopic; urgency=low

  [ Michael Sheldon ]
  * Display padlock when viewing pages over HTTPS. Provide certificate
details when padlock is clicked. Display error pages when invalid
SSL certificates are presented and allow users to override these
warnings. . Display warning symbol when insecure content is loaded
over HTTPS (currently incorrect icon, should be updated when dialog-
warning-symbol lands in ubuntu-theme). (LP: #1214034)
 -- Ubuntu daily releaseMon, 22 Sep 2014 
21:13:10 +

** Changed in: webbrowser-app (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1214034

Title:
  Implement API for querying SSL status and certificate information and
  signalling SSL errors to the embedder

Status in Oxide Webview:
  Fix Released
Status in Web Browser App:
  In Progress
Status in “webbrowser-app” package in Ubuntu:
  Fix Released

Bug description:
  The webview should expose an API for querying SSL status and
  certificate information and signalling SSL errors to the embedder.
  This is required in order to present something other than a blank page
  when we encounter verification issues

To manage notifications about this bug go to:
https://bugs.launchpad.net/oxide/+bug/1214034/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Fumihito YOSHIDA]

Hi,

Red Hat released new packages at
https://rhn.redhat.com/errata/RHSA-2014-1306.html, that include fix for
CVE-2014-7169, and they fixed with another way, and another problems
(OOB memory access).

We can investigate from RH SRPM,
http://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/bash-4.1.2-15.el6_5.2.src.rpm

IMHO, Red Hat fix included 3 patches.
 - bash-4.2-cve-2014-7169-0.patch : parser bug fix-A for CVE-2014-7169 (same as 
http://seclists.org/oss-sec/2014/q3/685 )
 - bash-4.2-cve-2014-7169-1.patch : introduce variable isolation in  function 
import situation. another fix for CVE-2014-7169. this is new patch.
 - bash-4.2-cve-2014-7169-2.patch : OOB memory access(new problem) fix. 

They probosed these new patches at http://www.openwall.com/lists/oss-
security/2014/09/25/32 .

I make a proposition about that, could we apply these new patches? or
they are not important?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  In Progress
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Launchpad Bug Tracker]

** Branch linked: lp:ubuntu/trusty-security/bash

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367241] Re: Incorrect udev-fallback-graphics.conf

[TWC Service]

This resolves our issue, so +1 on the migration from proposed.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1367241

Title:
  Incorrect udev-fallback-graphics.conf

Status in “systemd” package in Ubuntu:
  Fix Released
Status in “udev” package in Ubuntu:
  Invalid
Status in “udev” source package in Precise:
  Fix Committed
Status in “systemd” source package in Trusty:
  Fix Committed
Status in “systemd” source package in Utopic:
  Fix Released

Bug description:
  [Impact]

   * When setting up primary display driver fails an attempt to load vesafb
 module is undertaken. This fails since from 3.13.0-16.36 version
 vesafb is compiled in the kernel (so no actual modprobing is needed).
 This causes false alert in the log:
 "Starting load fallback graphic devices: [fail]"

  [Test Case]

   * Start Ubuntu unable to load primary graphics driver (the simplest way is 
to remove module responsible for the device).
   * Wait for loading graphics devices.
   * If the primary device module has failed to load, falling back to vesafb 
will be attempted.

  [Regression Potential]

   * Implemented by the bug reported.

   * Affects only the debian/ directory.

  [Other Info]
   
   * Original bug description:

  The udev-fallback-graphics.conf script tries to load vesafb module if
  PRIMARY_DEVICE_FOR_DISPLAY has not been set earlier.

  The problem is that from kernel version 3.13.0-16.36 vesafb is
  compiled in permanently into the kernel (CONFIG_FB_VESA=y), so
  whenever the fallback mode is triggered this script will FAIL
  confusing the users.

  Most probably this file is no longer needed (or it just be used to
  print informative message).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1367241/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1329584] Re: The label in the panel menu doesn't match the /etc/os-release NAME

[Anthony Wong]

** Changed in: ubuntukylin
Milestone: utopic-beta2 => utopic-final

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/1329584

Title:
  The label in the panel menu doesn't match the  /etc/os-release NAME

Status in Ubuntu Kylin:
  Confirmed
Status in Unity:
  Fix Committed
Status in Unity 7.2 series:
  In Progress
Status in “unity” package in Ubuntu:
  In Progress

Bug description:
  The desktop name "Ubuntu Desktop" can't change to "Ubuntu Kylin
  Desktop",it is not convenient for us to change it to our Special
  symbol.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntukylin/+bug/1329584/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369424] Re: LibreOffice windows and dialogs do not receive focus on startup (KDE, Razorqt)

[cleary]

I've logged this with the QT Bugtracker as well:
https://bugreports.qt-project.org/browse/QTBUG-41604

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qt4-x11 in Ubuntu.
https://bugs.launchpad.net/bugs/1369424

Title:
  LibreOffice windows and dialogs do not receive focus on startup (KDE,
  Razorqt)

Status in “qt4-x11” package in Ubuntu:
  New

Bug description:
  I hope I've got the correct package to log this against.

  Symptom:
  LibreOffice dialogs (such as password prompts, plaintext/csv imports etc) do 
not receive WM focus if a LibreOffice app is running and minimised.
  This causes a fairly severe usability issue, where it seems like LibreOffice 
has crashed, since nothing seems to happen when you click (and continue to 
click) to open a file that requires user action on a dialog.

  I've replicated the issue in KDE and RazorQT which is why I'm logging
  it against this qt-x11 package.

  It affects 12.04 and 14.04 (tested, I imagine there are more)

  The issue does not occur in Unity or Gnome.

  I made two videos - based on:

  Ubuntu 12.04, bog standard install. Add kde via:
sudo apt-get install kubuntu-desktop

  add this ppa: 
https://launchpad.net/~libreoffice/+archive/ubuntu/libreoffice-4-3 
  upgrade all libreoffice packages to 4.3.0.4:
sudo apt-get install $(dpkg -l | grep libreoffice | awk '{print $2}')

  Video 1: Unity Desktop, expected (correct) behaviour
  https://drive.google.com/file/d/0BxhtBAYzjZj5V1V1NjRTRVRKZ0E/edit?usp=sharing

  Video 2: Logged out of Unity, logged into KDE Desktop - unexpected behaviour, 
as described by this bug:
  https://drive.google.com/file/d/0BxhtBAYzjZj5ODZ2RG1GZHZtUEE/edit?usp=sharing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qt4-x11/+bug/1369424/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Launchpad Bug Tracker]

This bug was fixed in the package bash - 4.3-7ubuntu1.3

---
bash (4.3-7ubuntu1.3) trusty-security; urgency=medium

  * Updated debian/patches/CVE-2014-7169.diff to also patch y.tab.c in
case it doesn't get regenerated when built (LP: #1374207)
 -- Marc DeslauriersThu, 25 Sep 2014 21:20:03 
-0400

** Changed in: bash (Ubuntu Trusty)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  Fix Released
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367920] Re: dialer not brought to foreground when launched from messaging-menu

[Bill Filler]

** Changed in: dialer-app
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-messages in
Ubuntu.
https://bugs.launchpad.net/bugs/1367920

Title:
  dialer not brought to foreground when launched from messaging-menu

Status in Dialer app for Ubuntu Touch:
  Confirmed
Status in “indicator-messages” package in Ubuntu:
  New
Status in “unity8” package in Ubuntu:
  New

Bug description:
  How to reproduce
  ===

  1 - Make sure that you have a missing call/voice mail message on messaging 
menu
  2 - Open dialer app
  3 - Open the messaging menu
  4 - Click to expand the message
  5 - Click on the phone app  icon in the top right 

  
  Expected
  

  The messaging menu disappear and the dialer app appears

  
  Current
  ==

  The message is removed but the messaging menu still visible.

To manage notifications about this bug go to:
https://bugs.launchpad.net/dialer-app/+bug/1367920/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1355093] Re: Inconsistent spinning-logo screens for startup and system image update

[Daniel van Vugt]

Jane: I suggest logging that bug in Unity8:
   https://bugs.launchpad.net/ubuntu/+source/unity8/+filebug

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to system-image in Ubuntu.
https://bugs.launchpad.net/bugs/1355093

Title:
  Inconsistent spinning-logo screens for startup and system image update

Status in Ubuntu UX bugs:
  Triaged
Status in Unity System Compositor:
  New
Status in “system-image” package in Ubuntu:
  Confirmed
Status in “unity-system-compositor” package in Ubuntu:
  Confirmed

Bug description:
  Ubuntu 14.10 r183

  1. Wait for an Ubuntu update to become available.
  2. Install the update, confirming the prompt to restart the phone.

  What happens:
  * The screen goes black with a large, flat, pale orange spinning Ubuntu logo.
  * The phone restarts.
  * The screen goes black with a small, glowing, dark orange spinning Ubuntu 
logo.

  What should happen:
  * The Ubuntu logos should have exactly the same size, position, lighting, and 
color on both screens.

  :
  "If you choose 'Install & Restart', a variation of the shutdown screen
  should appear..."

  It may save time to fix bug 1335789 at the same time as this bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1355093/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367916] Re: Phone freezes when trying to active the dialer app from the messaging menu

[Bill Filler]

Looks to be similiar to
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1367920

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-messages in
Ubuntu.
https://bugs.launchpad.net/bugs/1367916

Title:
  Phone freezes when trying to active the dialer app from the messaging
  menu

Status in The Messaging Menu:
  New
Status in “indicator-messages” package in Ubuntu:
  New
Status in “unity8” package in Ubuntu:
  New

Bug description:
  How to reproduce
  ==

  1 - Make sure that you have a missing call/voice message in your messaging 
indicator
  2 - Launch the dialer app
  3 - Lock your phone
  4 - From the lock screen open the messaging menu
  5 - Click to expand the message
  6 - Click on the icon in the top right

  Expected
  ==

  The dialer app appears with the phone pre-populated

  Current
  ===

  The phone freezes and stop to accept any input.

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-messages/+bug/1367916/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367920] Re: Application does not appear if called from menu

[Bill Filler]

This is similar to bug https://bugs.launchpad.net/ubuntu/+source
/indicator-messages/+bug/1367916 but even more basic. The dialer-app
does not come to the foreground at all when launched from the indicator,
even if the phone is not locked.

** Also affects: indicator-messages (Ubuntu)
   Importance: Undecided
   Status: New

** No longer affects: indicator-messages

** Summary changed:

- Application does not appear if called from menu
+ dialer not brought to foreground when launched from messaging-menu

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: indicator-messages (Ubuntu)
   Importance: Undecided => High

** Changed in: unity8 (Ubuntu)
   Importance: Undecided => High

** Changed in: dialer-app
   Importance: Undecided => High

** Tags added: rtm14

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-messages in
Ubuntu.
https://bugs.launchpad.net/bugs/1367920

Title:
  dialer not brought to foreground when launched from messaging-menu

Status in Dialer app for Ubuntu Touch:
  Confirmed
Status in “indicator-messages” package in Ubuntu:
  New
Status in “unity8” package in Ubuntu:
  New

Bug description:
  How to reproduce
  ===

  1 - Make sure that you have a missing call/voice mail message on messaging 
menu
  2 - Open dialer app
  3 - Open the messaging menu
  4 - Click to expand the message
  5 - Click on the phone app  icon in the top right 

  
  Expected
  

  The messaging menu disappear and the dialer app appears

  
  Current
  ==

  The message is removed but the messaging menu still visible.

To manage notifications about this bug go to:
https://bugs.launchpad.net/dialer-app/+bug/1367920/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1347001] Re: [Greeter] is shown during a call

[Bill Filler]

** No longer affects: dialer-app

** No longer affects: dialer-app (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1347001

Title:
  [Greeter] is shown during a call

Status in Ubuntu UX bugs:
  Fix Committed
Status in “unity8” package in Ubuntu:
  Fix Released

Bug description:
  During a call, position the phone such that the proximity sensor is not 
enabled, i.e. put phone on table
  The screen shuts off
  In order to wake the phone up user needs to push power button
  * Screen should turn on when the phone is moved
  The greeter is also shown
  * Greeter should never be shown during an active call

  ---

  Nor the any other lock screens

  See description below:
  Steps to reproduce:

  1. set up a passcode/passphrase on device
  2. lock device or wait until it locks automatically
  3. call device
  4. accept call
  5. wait until device locks screen (timeout) or lock manually via hard key 
button
  6. unlock device

  Actual result:
  The Greeter is shown and has to be moved out of the way and then user has to 
unlock device via the passcode/passphrase screen.

  Expected result:
  The device should not time out/lock on an active call. Even if the device 
locked manually (via hard key button) and unlocked again, user should be 
presented with the active call screen.
  If user tries to access contacts, add someone to the call or start a 2nd call 
or access settings, the passcode/passphrase screen should be presented to 
unlock device & user will be redirected to the correct action/function.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1347001/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1364489] Re: show country flags and local time next to phone numbers

[Bill Filler]

** Changed in: dialer-app (Ubuntu)
   Importance: Undecided => Wishlist

** Changed in: address-book-app (Ubuntu)
   Importance: Undecided => Wishlist

** Changed in: dialer-app (Ubuntu)
   Status: New => Triaged

** Changed in: address-book-app (Ubuntu)
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1364489

Title:
  show country flags and local time next to phone numbers

Status in “address-book-app” package in Ubuntu:
  Triaged
Status in “dialer-app” package in Ubuntu:
  Triaged

Bug description:
  Ideally also show local time for that country in brackets.

  Would be great to see the flags + time in the dialer too.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/address-book-app/+bug/1364489/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367341] Re: proximity sensor blanks screen when dialer is not active app

[Bill Filler]

** Changed in: dialer-app (Ubuntu)
   Status: New => Invalid

** Also affects: telepathy-ofono
   Importance: Undecided
   Status: New

** Changed in: telepathy-ofono
   Status: New => In Progress

** Tags added: rtm14

** Changed in: powerd
   Importance: Undecided => High

** Changed in: telepathy-ofono
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1367341

Title:
  proximity sensor blanks screen when dialer is not active app

Status in PowerD:
  In Progress
Status in Telepathy Ofono:
  In Progress
Status in “dialer-app” package in Ubuntu:
  Invalid
Status in “unity-system-compositor” package in Ubuntu:
  New

Bug description:
  Steps:
  1. Make a phone call with BT so that you are not holding the phone to hear 
and talk
  2. Push the power button to blank the screen
  3. Push the power button again, observe that you are at the welcome screen
  4. Wave a finger over the proximity sensor

  Effect:
  The screen blanks while finger is over the sensor

  Expected:
  The sensor only blanks the screen while the dialer app is being used

  this is kirllin r23

To manage notifications about this bug go to:
https://bugs.launchpad.net/powerd/+bug/1367341/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1365400] Re: "Recent" pull-up confusing on new phone

[Bill Filler]

Do we have a design for an empty Recents page?

** Also affects: ubuntu-ux
   Importance: Undecided
   Status: New

** Tags added: rtm14

** Changed in: dialer-app (Ubuntu)
   Importance: Undecided => High

** Changed in: dialer-app (Ubuntu)
   Status: New => Triaged

** Changed in: dialer-app (Ubuntu)
 Assignee: (unassigned) => Gustavo Pichorim Boiko (boiko)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1365400

Title:
  "Recent" pull-up confusing on new phone

Status in Ubuntu UX bugs:
  New
Status in “dialer-app” package in Ubuntu:
  Triaged

Bug description:
  The "recent" pull-up from the bottom display is confusingly blank when
  started on a clean phone. Tried on krillin #14 and #15

  Steps to reproduce.

  1. Have a phone which hasn't made any phone calls
  2. Open dialer app and swipe up from the bottom
  3. You end up with a blank screen you can't easily exit from. In addition you 
can type through the blank screen and dial numbers.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1365400/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1372973] Re: [Call]There should be a audible feedback(e.g beep) when the caller hangs up first

[Bill Filler]

** Changed in: dialer-app
   Importance: Undecided => High

** Changed in: dialer-app (Ubuntu)
   Importance: Undecided => High

** Changed in: dialer-app
 Assignee: (unassigned) => Gustavo Pichorim Boiko (boiko)

** Changed in: dialer-app (Ubuntu)
 Assignee: (unassigned) => Gustavo Pichorim Boiko (boiko)

** Changed in: dialer-app
   Status: New => Confirmed

** Changed in: dialer-app (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1372973

Title:
  [Call]There should be a audible feedback(e.g beep) when the caller
  hangs up first

Status in Dialer app for Ubuntu Touch:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in “dialer-app” package in Ubuntu:
  Confirmed

Bug description:
  [Procedures]
  1.there is a voice call
  2.the other party hangs up first
  3.the conversation view exit automatically

  [Expect results]
  There should be a audible feedback (e.g beeps) when the conversation view 
exit automatically

  [Actual results]
  Nothing

  [Reproduce]
  Always

To manage notifications about this bug go to:
https://bugs.launchpad.net/dialer-app/+bug/1372973/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Marc Deslauriers]

There was a build issue with the Ubuntu 14.04 package, and I am in the
process of fixing it now. An update will be released within the hour.

The other releases should be ok.

** Also affects: bash (Ubuntu Lucid)
   Importance: Undecided
   Status: New

** Also affects: bash (Ubuntu Utopic)
   Importance: Undecided
   Status: Confirmed

** Also affects: bash (Ubuntu Precise)
   Importance: Undecided
   Status: New

** Also affects: bash (Ubuntu Trusty)
   Importance: Undecided
   Status: New

** Changed in: bash (Ubuntu Lucid)
   Status: New => Fix Released

** Changed in: bash (Ubuntu Precise)
   Status: New => Fix Released

** Changed in: bash (Ubuntu Trusty)
   Status: New => In Progress

** Changed in: bash (Ubuntu Utopic)
   Status: Confirmed => In Progress

** Changed in: bash (Ubuntu Trusty)
 Assignee: (unassigned) => Marc Deslauriers (mdeslaur)

** Changed in: bash (Ubuntu Utopic)
 Assignee: (unassigned) => Marc Deslauriers (mdeslaur)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  In Progress
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Marc Deslauriers]

There was a build issue with the Ubuntu 14.04 package, and I am in the
process of fixing it now. An update will be released within the hour.

The other releases should be ok.

** Changed in: bash (Ubuntu)
 Assignee: (unassigned) => Marc Deslauriers (mdeslaur)

** Also affects: bash (Ubuntu Lucid)
   Importance: Undecided
   Status: New

** Also affects: bash (Ubuntu Trusty)
   Importance: Undecided
   Status: New

** Also affects: bash (Ubuntu Utopic)
   Importance: Undecided
 Assignee: Marc Deslauriers (mdeslaur)
   Status: Confirmed

** Also affects: bash (Ubuntu Precise)
   Importance: Undecided
   Status: New

** Changed in: bash (Ubuntu Lucid)
   Status: New => Fix Released

** Changed in: bash (Ubuntu Precise)
   Status: New => Fix Released

** Changed in: bash (Ubuntu Trusty)
   Status: New => In Progress

** Changed in: bash (Ubuntu Utopic)
   Status: Confirmed => In Progress

** Changed in: bash (Ubuntu Trusty)
 Assignee: (unassigned) => Marc Deslauriers (mdeslaur)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  In Progress
Status in “bash” source package in Lucid:
  Fix Released
Status in “bash” source package in Precise:
  Fix Released
Status in “bash” source package in Trusty:
  In Progress
Status in “bash” source package in Utopic:
  In Progress

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373855] Re: Photos taken with Krillin camera show as black in preview and when set as wallpaper

[Ken VanDine]

*** This bug is a duplicate of bug 1373462 ***
https://bugs.launchpad.net/bugs/1373462

I'm confident this is really a dupe of bug 1373462

** This bug has been marked a duplicate of bug 1373462
   [background] Preview/Background is black for some images

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to content-hub in Ubuntu.
https://bugs.launchpad.net/bugs/1373855

Title:
  Photos taken with Krillin camera show as black in preview and when set
  as wallpaper

Status in “content-hub” package in Ubuntu:
  New

Bug description:
  Prerequisite: You should already have taken a photo with the Krillins
  camera

  1. Open the System Settings application
  2. Open the Background panel
  3. From the 'Custom' section select 'Add an Image'
  4. Choose the image that you took with the phones camera from the gallery
  5. Confirm that the image appears in preview correctly and press 'Set'
  6. Confirm that the image is selected in the Background panel
  7. Press the power button twice, to return the phone to the lock screen
  8. Confirm that the image is shown as the background on the lock screen

  Steps 5 and 8 fail since the image is black

  This is very similar behaviour to :
  https://launchpad.net/bugs/1373462, but might not be a duplicate since
  when that bug was reported, Krillin camera images did work.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: ubuntu-system-settings 0.3+14.10.20140924-0ubuntu1 [origin: Ubuntu 
RTM]
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.14.7-0ubuntu1
  Architecture: armhf
  Date: Thu Sep 25 09:48:54 2014
  InstallationDate: Installed on 2014-09-25 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140925-030205)
  SourcePackage: ubuntu-system-settings
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/content-hub/+bug/1373855/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1186381] Re: Can not paste into web forms

[Des]

Ditto.

I am using Ubuntu 14.04 LTS Desktop version. It impact Yahoo!Mail and
Gmail.

I am switching back to webmail so long not fixed. It's just
inconvenient.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1186381

Title:
  Can not paste into web forms

Status in Web Browser App:
  Confirmed
Status in “webbrowser-app” package in Ubuntu:
  Confirmed

Bug description:
  I can copy text from one app, and paste it into the URL field of the
  browser, but I don't get a "Paste" option for input fields in the
  webpage itself.

  I found this when trying to log into an internal website, where SSO
  prompted me to perform 2-factor authentication.  I generated the one
  time password using CanonicalAuth, and was able to copy it into the
  clipboard.  However, I was unable to paste it into the 2fa field in
  the web browser.

  I could paste it into the URL field, so I know it was in the
  clipboard.  When long-pressing on the web form input field, I was
  given a menu with "Share", "Save" and "Copy", but not "Paste".

To manage notifications about this bug go to:
https://bugs.launchpad.net/webbrowser-app/+bug/1186381/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1353156] Re: Webogram login

[Bill Filler]

I don't understand the issue, please explain exactly the steps to
reproduce and what the problem is.

** Changed in: messaging-app (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1353156

Title:
  Webogram login

Status in “messaging-app” package in Ubuntu:
  Incomplete

Bug description:
  I entered my country code (+57) and my number 310XXX and pressed
  OK to confirm that is well written, it is "Generating Keys"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1353156/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366345] Re: "Send" button ellipisized in some locales

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => Medium

** Changed in: messaging-app (Ubuntu)
 Assignee: (unassigned) => Tiago Salem Herrmann (tiagosh)

** Tags added: rtm14

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1366345

Title:
  "Send" button ellipisized in some locales

Status in “messaging-app” package in Ubuntu:
  Confirmed

Bug description:
  Using rtm-17, the sms "send" message is ellipsized in french, showing as 
"Env..." instead of "Envoyer". 
  The width seems to be calculated for the english wording, there is enough 
space to show e.g "Envoyer" and still have enough space in the entry for useful 
content

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366345/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1360099] Re: Uses 12h instead of 24h format (on a German locale)

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1360099

Title:
  Uses 12h instead of 24h format (on a German locale)

Status in “messaging-app” package in Ubuntu:
  Fix Released
Status in “notes-app” package in Ubuntu:
  New

Bug description:
  I'm on image #203 on mako and use a German locale.

  In other apps, the 24h format is used (which is what I, and other
  Germans, would expect). In the messaging app however, I see "11:34
  nachm.", which is supposed to mean "23:34". Unfortunately "nachm." is
  short for "nachmittag", so "afternoon", which hardly makes sense for
  23:34. This is due to the fact, that we have no good way of expressing
  AM/PM in German, as it's simply not used.

  If the messaging-app used the 24h format on a German locale, the
  problem would be fixed.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1360099/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366349] Re: Contact entry missing when rotating

[Bill Filler]

*** This bug is a duplicate of bug 1358873 ***
https://bugs.launchpad.net/bugs/1358873

** This bug has been marked a duplicate of bug 1358873
   the "to" section for typing or contact selection is not displayed when 
rotated

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1366349

Title:
  Contact entry missing when rotating

Status in “messaging-app” package in Ubuntu:
  New

Bug description:
  Using rtm 17
  - open the "new message" screen by pulling the bottom action widget
  - notice that there is a "add contacts" entry at the top of the screen
  - rotate the device in landscape

  -> the contact entry is missing from the u.i

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366349/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366350] Re: the "add contact" clue is ellipsized when not needed

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => Medium

** Changed in: messaging-app (Ubuntu)
 Assignee: (unassigned) => Tiago Salem Herrmann (tiagosh)

** Tags added: rtm14

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1366350

Title:
  the "add contact" clue is ellipsized when not needed

Status in “messaging-app” package in Ubuntu:
  Confirmed

Bug description:
  Using rtm 17, on krillin, in french, open the "new message" screen by
  pulling the bottom action widget

  -> the entry add the top has a clue " Ajouter des conta… "  with space
  on the right for at least 6 more chars, the correct french label is "
  Ajouter des contacts… ", it could be displayed correctly

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366350/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366364] Re: Count sms that failed to be sent as sent, on the greeter

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => Medium

** Tags added: rtm14

** Changed in: messaging-app (Ubuntu)
 Assignee: (unassigned) => Tiago Salem Herrmann (tiagosh)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1366364

Title:
  Count sms that failed to be sent as sent, on the greeter

Status in “messaging-app” package in Ubuntu:
  Confirmed

Bug description:
  Using rtm 17 on krillin, after having some failed message sending (e.g
  tried to send a contact info and a photo on a phone without data
  plan), the lock screen animation displays a count including those
  messages, that seems wrong

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366364/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366358] Re: Display "am/pm" next to 24 hours values

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1366358

Title:
  Display "am/pm" next to 24 hours values

Status in “messaging-app” package in Ubuntu:
  Fix Released

Bug description:
  Using rtm-17 in french locale, the messages list displays 24 hours
  marks on the right, but it appends am/pm next to those (e.g "19:31
  pm"), the am/pm shouldn't be displayed when the locale use 24 hours

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366358/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366367] Re: Doesn't explain why messages failed to be send

[Bill Filler]

If you swipe left on the failed message you will see an option for "i"
for information. Invoking this will show delivery report and Status, but
I'm not sure at this point if the Status message gives detailed
description of the error failure.

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => Low

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1366367

Title:
  Doesn't explain why messages failed to be send

Status in “messaging-app” package in Ubuntu:
  Confirmed

Bug description:
  Using rtm 17 on krillin

  Trying to send a contact info or a picture from a photo without data
  plan leads to an error, that might be expected but it would be nice to
  give a clue in the U.I when the message failed to be sent

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366367/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1368718] Re: [messaging-app] improve bottom edge interaction

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => In Progress

** Changed in: messaging-app
   Status: Confirmed => In Progress

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1368718

Title:
  [messaging-app] improve bottom edge interaction

Status in Address Book App:
  Fix Released
Status in Dialer app for Ubuntu Touch:
  Fix Released
Status in Messaging App:
  In Progress
Status in Ubuntu UX bugs:
  Fix Committed
Status in “address-book-app” package in Ubuntu:
  Fix Released
Status in “dialer-app” package in Ubuntu:
  Fix Released
Status in “messaging-app” package in Ubuntu:
  In Progress

Bug description:
  Steps to reproduce:

  1. Open Messaging app
  2. Carry out a slow bottom edge swipe and stop when the bottom view covers 
around 1/3rd of the screen without releasing your finger from the screen. 
Release the finger.
  3. Current implementation: the bottom edge continues and the "compose new 
message screen" is invoked.
  4. Tap the back button and cancel the new message
  5. Carry out a new swipe from the bottom edge but half way through, do a 
short swipe back without releasing your finger from the screen (you might have 
to do it several times). 
  6. Current implementation: the swipe direction back (towards the bottom) 
seems not recognized. The compose new view is still invoked. 

  -
  Desired solution:
  The "compose new" view should be invoked a little later than in the current 
implementation. And the swipe direction recognition should be improved.

To manage notifications about this bug go to:
https://bugs.launchpad.net/address-book-app/+bug/1368718/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369474] Re: Conversation tagged with wrong contact after sending sms

[Bill Filler]

this could happen if you have multiple contacts with the same phone number..
Could you provide exact steps to reproduce this please, as I am not 
encountering this issue.

** Changed in: messaging-app (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1369474

Title:
  Conversation tagged with wrong contact after sending sms

Status in “messaging-app” package in Ubuntu:
  Incomplete

Bug description:
  Mako running MultiROM with #239

  1. Enter an existing conversation
  2. Send an sms
  3. Look at the top of the screen, which have now changed to another contact 
than in the original conversation.

  Gives me the creeps when it looks as if I sent a text to the wrong
  recipient, until I find out that the messaging app is only "kidding".

  Going back, the intended conversation shows at the top of the
  conversations as it should, and reentering that conversation also
  shows the correct contact.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1369474/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366592] Re: empty lines are not shown in messages

[Bill Filler]

using the latest rtm build 59 I can confirm slightly different, but still 
broken behavior.
The notification bubble now appends the lines together. The messaging-app just 
ignores the blank line

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => Medium

** Changed in: messaging-app (Ubuntu)
 Assignee: (unassigned) => Tiago Salem Herrmann (tiagosh)

** Tags added: rtm14

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1366592

Title:
  empty lines are not shown in messages

Status in “messaging-app” package in Ubuntu:
  Confirmed

Bug description:
  It seems that newlines in messages are sent and received, but they are
  not shown in the messaging-app (I would expect that they would be
  shown). However, the newline is shown in the notification bubble (see
  attached screenshot) and in the Notification center.

  OS: Ubuntu 14.10 (r203)

  Version of the app:
  $ apt-cache policy messaging-app
  messaging-app:
Installed: 0.1+14.10.20140813.2-0ubuntu1
Candidate: 0.1+14.10.20140828.3-0ubuntu1
Version table:
   0.1+14.10.20140828.3-0ubuntu1 0
  500 http://ports.ubuntu.com/ubuntu-ports/ utopic/universe armhf 
Packages
   *** 0.1+14.10.20140813.2-0ubuntu1 0
  100 /var/lib/dpkg/status

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1366592/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1278790] Re: [Messaging] Show number of characters used

[Bill Filler]

** Changed in: messaging-app
   Importance: Medium => Wishlist

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => Wishlist

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1278790

Title:
  [Messaging] Show number of characters used

Status in Messaging App:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in “messaging-app” package in Ubuntu:
  Confirmed

Bug description:
  As many carriers charge per text message sent, it'd be nice to show
  how many characters were used for the message, so the sender knows how
  many sent text messages this boils down to.

To manage notifications about this bug go to:
https://bugs.launchpad.net/messaging-app/+bug/1278790/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370376] Re: Can't receive MMS despite ability to send

[Bill Filler]

mms recv does work, but might be a carrier specific issue. Works for me
on At+t in US

** Also affects: nuntium (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: network-manager (Ubuntu)
   Importance: Undecided
   Status: New

** No longer affects: messaging-app (Ubuntu)

** Tags added: rtm14

** Changed in: network-manager (Ubuntu)
   Importance: Undecided => High

** Changed in: nuntium (Ubuntu)
   Importance: Undecided => High

** Changed in: nuntium (Ubuntu)
 Assignee: (unassigned) => Sergio Schvezov (sergiusens)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1370376

Title:
  Can't receive MMS despite ability to send

Status in “network-manager” package in Ubuntu:
  New
Status in “nuntium” package in Ubuntu:
  New

Bug description:
  I can send MMS (and they actually come through to the recipient), but
  I can't receive MMS. I am not sure if this is an APN settings issue,
  but I would have thought it either worked both ways or not at all.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1370376/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1341681] Re: Autopilot tests should stop using deprecated emulators module

[Ubuntu Phone Apps Jenkins Bot]

Fix committed into lp:ubuntu-filemanager-app at revision 286, scheduled
for release in ubuntu-filemanager-app, milestone alpha-1

** Changed in: ubuntu-filemanager-app
   Status: New => Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1341681

Title:
  Autopilot tests should stop using deprecated emulators module

Status in Dialer app for Ubuntu Touch:
  In Progress
Status in Dropping Letters:
  New
Status in Music application for Ubuntu devices:
  Fix Released
Status in Notes App:
  New
Status in Ubuntu Reminders app:
  Fix Released
Status in Sudoku game for Ubuntu Touch:
  New
Status in Calculator application for Ubuntu devices:
  Fix Committed
Status in Calendar application for Ubuntu devices:
  Fix Released
Status in Clock application for Ubuntu devices:
  Fix Released
Status in Document Viewer application for Ubuntu devices:
  New
Status in File Manager application for Ubuntu devices:
  Fix Committed
Status in RSS Feed Reader application for Ubuntu devices:
  New
Status in Terminal application for Ubuntu devices:
  Fix Released
Status in Weather application for Ubuntu devices:
  New
Status in “dialer-app” package in Ubuntu:
  Fix Released

Bug description:
  Autopilot tests should stop using deprecated emulators module. Instead
  the new custom_proxy_objects modules should be used and called
  directly.

  Please note until https://bugs.launchpad.net/ubuntu-ui-
  toolkit/+bug/1341679 is fixed, the deprecation warning will still
  appear.

To manage notifications about this bug go to:
https://bugs.launchpad.net/dialer-app/+bug/1341681/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1353475] Re: Emoticons not visible

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1353475

Title:
  Emoticons not visible

Status in “messaging-app” package in Ubuntu:
  Fix Released

Bug description:
  I received a text message with an emoticon of some sort.  But it
  wasn't visible to me, just appeared as a white box.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1353475/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373479] Re: [messaging-app] new received messages are not scrolled into view

[Bill Filler]

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => High

** Changed in: messaging-app (Ubuntu)
 Assignee: (unassigned) => Tiago Salem Herrmann (tiagosh)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1373479

Title:
  [messaging-app] new received messages are not scrolled into view

Status in Messaging App:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in “messaging-app” package in Ubuntu:
  Confirmed

Bug description:
  If you are in the thread view and are scrolled back in the
  conversation, if a new message is received it is not visible. It is
  added to the bottom of the thread but is not scrolled to
  automatically. The user will hear a beep/vibration but not recieve a
  notification - as you are in the current thread. So without scrolling
  the message into view it's possible for the user to not notice it,
  especially if phone is in silent mode.

  Expected result:
  we should always scroll new messages into view

  iphone does this by default, Android legacy sms app does this but the
  hangout application does not. Need guidance from design.

To manage notifications about this bug go to:
https://bugs.launchpad.net/messaging-app/+bug/1373479/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370146] Re: Adjust header behaviour & UI in multi select mode

[Bill Filler]

** Changed in: address-book-app
   Status: New => Confirmed

** Changed in: dialer-app
   Status: New => Confirmed

** Changed in: messaging-app
   Status: New => Confirmed

** Changed in: address-book-app (Ubuntu)
   Status: New => Confirmed

** Changed in: dialer-app (Ubuntu)
   Status: New => Confirmed

** Changed in: messaging-app (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1370146

Title:
  Adjust header behaviour & UI in multi select mode

Status in Address Book App:
  Confirmed
Status in Dialer app for Ubuntu Touch:
  Confirmed
Status in Messaging App:
  Confirmed
Status in Clock application for Ubuntu devices:
  Fix Released
Status in Ubuntu UI Toolkit:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Released
Status in “address-book-app” package in Ubuntu:
  Confirmed
Status in “dialer-app” package in Ubuntu:
  Confirmed
Status in “messaging-app” package in Ubuntu:
  Confirmed
Status in “ubuntu-ui-toolkit” package in Ubuntu:
  New

Bug description:
  Steps to reproduce:

  1. Open Messaging app (or Address Book app, Phone app), make sure you have a 
list in your messages view
  2. Long press on any of the list items

  Actual Result:
  3. Header is changing and shows an X button on the left hand side and two 
action buttons on the right hand side. Selection checkboxes appear from the 
left hand side.

  Expected result - desired solution:
  - The header should display a BACK button instead of the "X" on the left hand 
side, same as we have in all other headers
  - Remove the change in the background colour when a list item is selected, 
change in the colour of the checkbox is enough
  - Add labels for all visible actions in this mode in the header, except for 
'BACK'
  - Tapping on the BACK in this mode, cancels the multi-select mode and does 
NOT navigate back to the previous view
  - There is no title in this header

  Please see attached wireframe for reference. This change applies
  across all apps which use a multi select in their list views.

To manage notifications about this bug go to:
https://bugs.launchpad.net/address-book-app/+bug/1370146/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1356369] Re: [shell] Please disable screen rotation till unity8 supports it as well

[Bill Filler]

** Changed in: messaging-app
   Status: New => Triaged

** Changed in: messaging-app (Ubuntu)
   Status: New => Triaged

** Changed in: messaging-app
   Importance: Undecided => Medium

** Changed in: messaging-app (Ubuntu)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1356369

Title:
  [shell] Please disable screen rotation till unity8 supports it as well

Status in Messaging App:
  Triaged
Status in Ubuntu UX bugs:
  Triaged
Status in “messaging-app” package in Ubuntu:
  Triaged

Bug description:
  Screen rotation conflicts with on screen notifications.

  1. In landscape mode try to write an SMS
  2. Ensure an incoming message while you are typing

  What happens:
  Notification appears over keyboard and you end up tapping on the notification 
losing your written text.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: messaging-app 0.1+14.10.20140806-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.5-0ubuntu4
  Architecture: armhf
  Date: Wed Aug 13 18:21:57 2014
  InstallationDate: Installed on 2014-08-13 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140813-020204)
  SourcePackage: messaging-app
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/messaging-app/+bug/1356369/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367916] Re: Phone freezes when trying to active the dialer app from the messaging menu

[Bill Filler]

I can confirm this still happens, with latest rtm build 59 on krillin

Steps to reproduce:
1) make sure you have a passcode lock setup on phone
2) make sure you have indicator allows to show on lock screen (default)
3) launch dialer app
4) lock the phone
5) call the phone and hang up before answering it, then wait till phone turns 
off after 1 minute
6) turn on screen but don't unlock
7) pull down the messaging menu, and click on the Missed Call to expand it, 
then tap in right corner to launch the app

Expected Results:
The passcode unlock screen should be shown

Actual Results:
The messaging menu stays visible, and you can't swipe it up or close it in any 
way. The only way to recover is to lock and unlock the phone again.

Second Problem:
If you omit step 3 and don't first launch the dialer, the symptoms are 
different. The dialer gets launched in step 7 and is visible but it's in 
Emergency calling mode (because the phone is locked) so the call can't be made. 
The correct thing to do in both cases is to display the passcode unlock screen.

** Changed in: indicator-messages
   Importance: Undecided => Critical

** Changed in: indicator-messages (Ubuntu)
   Importance: Undecided => Critical

** Tags added: rtm14

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-messages in
Ubuntu.
https://bugs.launchpad.net/bugs/1367916

Title:
  Phone freezes when trying to active the dialer app from the messaging
  menu

Status in The Messaging Menu:
  New
Status in “indicator-messages” package in Ubuntu:
  New

Bug description:
  How to reproduce
  ==

  1 - Make sure that you have a missing call/voice message in your messaging 
indicator
  2 - Launch the dialer app
  3 - Lock your phone
  4 - From the lock screen open the messaging menu
  5 - Click to expand the message
  6 - Click on the icon in the top right

  Expected
  ==

  The dialer app appears with the phone pre-populated

  Current
  ===

  The phone freezes and stop to accept any input.

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-messages/+bug/1367916/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367459] Re: Messaging app should not rotate upside down

[Bill Filler]

** Changed in: messaging-app
   Status: New => Confirmed

** Changed in: messaging-app
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1367459

Title:
  Messaging app should not rotate upside down

Status in Messaging App:
  Confirmed
Status in Ubuntu UI Toolkit:
  New
Status in “unity8” package in Ubuntu:
  New

Bug description:
  The messaging app should not rotate upside down.
  This can be confuse, and in some cases causes problems  for example the user 
can try to answer a call in the incorrect position.

To manage notifications about this bug go to:
https://bugs.launchpad.net/messaging-app/+bug/1367459/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374217] [NEW] ubuntu-desktop-next conflicts with ubuntu-gnome-desktop

[Kai Mast]

Public bug reported:

And I would like to try/use both...

kai@Kai-Thinkpad:~$ sudo apt-get install ubuntu-gnome-desktop 
[sudo] password for kai: 
Reading package lists... Done
Building dependency tree   
Reading state information... Done
The following extra packages will be installed:
  argyll cheese deja-dup-backend-cloudfiles deja-dup-backend-s3 evolution
  evolution-common evolution-plugins fonts-cantarell gdm geoclue-2.0
  gir1.2-accountsservice-1.0 gir1.2-caribou-1.0 gir1.2-champlain-0.12
  gir1.2-clutter-1.0 gir1.2-clutter-gst-2.0 gir1.2-cogl-1.0 gir1.2-coglpango-1.0
  gir1.2-evince-3.0 gir1.2-gck-1 gir1.2-gcr-3 gir1.2-gdesktopenums-3.0
  gir1.2-gdm-1.0 gir1.2-geocodeglib-1.0 gir1.2-gkbd-3.0 gir1.2-gnomedesktop-3.0
  gir1.2-gtkchamplain-0.12 gir1.2-gtkclutter-1.0 gir1.2-gtop-2.0
  gir1.2-gweather-3.0 gir1.2-mutter-3.0 gir1.2-nmgtk-1.0 gir1.2-polkit-1.0
  gir1.2-rest-0.7 gir1.2-totem-1.0 gir1.2-tracker-1.0 gir1.2-upowerglib-1.0
  gir1.2-xkl-1.0 gir1.2-zpj-0.0 gjs gnome-backgrounds gnome-color-manager
  gnome-control-center gnome-documents gnome-icon-theme-extras
  gnome-icon-theme-full gnome-maps gnome-online-accounts gnome-online-miners
  gnome-session gnome-settings-daemon gnome-shell gnome-shell-common
  gnome-shell-extensions gnome-sushi gnome-themes-standard
  gnome-themes-standard-data gnome-tweak-tool gnome-weather grilo-plugins-0.2
  gtk2-engines-pixbuf gvfs-backends-goa itstool libcaribou-common libcaribou0
  libchamplain-0.12-0 libchamplain-gtk-0.12-0 libcolord-gtk1 libevolution 
libgdm1
  libgeocode-glib0 libgfbgraph-0.2-0 libgjs0e libgsf-1-114 libgsf-1-common
  libgtkhtml-4.0-0 libgtkhtml-4.0-common libgtkhtml-editor-4.0-0 
libgtkspell3-3-0
  libgupnp-av-1.0-2 libicc2 libimdi0 libmail-spf-perl libmediaart-1.0-0
  libmozjs-24-0 libmusicbrainz5-0 libmutter0d libnetaddr-ip-perl 
libnss-myhostname
  libpst4 libreoffice-style-tango libtotem0 libtracker-control-1.0-0
  libtracker-miner-1.0-0 libtracker-sparql-1.0-0 libxcb-xf86dri0 libytnef0
  libzapojit-0.0-0 mcp-account-manager-goa mutter mutter-common
  plymouth-theme-ubuntu-gnome-logo plymouth-theme-ubuntu-gnome-text python-boto
  python-cloudfiles python3-aptdaemon.pkcompat re2c realmd sa-compile 
spamassassin
  spamc totem totem-plugins tracker tracker-extract tracker-miner-fs 
tracker-utils
  ubuntu-gnome-default-settings ubuntu-gnome-wallpapers
  ubuntu-gnome-wallpapers-trusty unoconv xserver-xephyr yelp-tools zsync
Suggested packages:
  gir1.2-colordgtk-1.0 gnome-video-effects-frei0r evolution-ews
  evolution-plugins-experimental desktop-base gstreamer1.0-libav 
tango-icon-theme
  razor libdbi-perl pyzor libmail-dkim-perl totem-mozilla gromit tracker-gui
The following packages will be REMOVED:
  packagekit ubuntu-desktop-next
The following NEW packages will be installed:
  argyll cheese deja-dup-backend-cloudfiles deja-dup-backend-s3 evolution
  evolution-common evolution-plugins fonts-cantarell gdm geoclue-2.0
  gir1.2-accountsservice-1.0 gir1.2-caribou-1.0 gir1.2-champlain-0.12
  gir1.2-clutter-1.0 gir1.2-clutter-gst-2.0 gir1.2-cogl-1.0 gir1.2-coglpango-1.0
  gir1.2-evince-3.0 gir1.2-gck-1 gir1.2-gcr-3 gir1.2-gdesktopenums-3.0
  gir1.2-gdm-1.0 gir1.2-geocodeglib-1.0 gir1.2-gkbd-3.0 gir1.2-gnomedesktop-3.0
  gir1.2-gtkchamplain-0.12 gir1.2-gtkclutter-1.0 gir1.2-gtop-2.0
  gir1.2-gweather-3.0 gir1.2-mutter-3.0 gir1.2-nmgtk-1.0 gir1.2-polkit-1.0
  gir1.2-rest-0.7 gir1.2-totem-1.0 gir1.2-tracker-1.0 gir1.2-upowerglib-1.0
  gir1.2-xkl-1.0 gir1.2-zpj-0.0 gjs gnome-backgrounds gnome-color-manager
  gnome-control-center gnome-documents gnome-icon-theme-extras
  gnome-icon-theme-full gnome-maps gnome-online-accounts gnome-online-miners
  gnome-session gnome-settings-daemon gnome-shell gnome-shell-common
  gnome-shell-extensions gnome-sushi gnome-themes-standard
  gnome-themes-standard-data gnome-tweak-tool gnome-weather grilo-plugins-0.2
  gtk2-engines-pixbuf gvfs-backends-goa itstool libcaribou-common libcaribou0
  libchamplain-0.12-0 libchamplain-gtk-0.12-0 libcolord-gtk1 libevolution 
libgdm1
  libgeocode-glib0 libgfbgraph-0.2-0 libgjs0e libgsf-1-114 libgsf-1-common
  libgtkhtml-4.0-0 libgtkhtml-4.0-common libgtkhtml-editor-4.0-0 
libgtkspell3-3-0
  libgupnp-av-1.0-2 libicc2 libimdi0 libmail-spf-perl libmediaart-1.0-0
  libmozjs-24-0 libmusicbrainz5-0 libmutter0d libnetaddr-ip-perl 
libnss-myhostname
  libpst4 libreoffice-style-tango libtotem0 libtracker-control-1.0-0
  libtracker-miner-1.0-0 libtracker-sparql-1.0-0 libxcb-xf86dri0 libytnef0
  libzapojit-0.0-0 mcp-account-manager-goa mutter mutter-common
  plymouth-theme-ubuntu-gnome-logo plymouth-theme-ubuntu-gnome-text python-boto
  python-cloudfiles python3-aptdaemon.pkcompat re2c realmd sa-compile 
spamassassin
  spamc totem totem-plugins tracker tracker-extract tracker-miner-fs 
tracker-utils
  ubuntu-gnome-default-settings ubuntu-gnome-desktop ubuntu-gnome-wallpapers
  ubuntu-gnome-wallpapers-trusty unoconv xserver-xephyr yelp-tools zsync
0 upgraded, 124 newly installed, 2 to rem

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Harry Willis]

As per comment #5 on bug #1373781, the executables appear not to have
been updated to their patched versions (forgot to recompile, I guess?)
before the packages were generated.

Appears to be the case all bash and bash-static packages of the
4.3-7ubuntu1.2 ilk.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  Confirmed

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367916] Re: Phone freezes when trying to active the dialer app from the messaging menu

[Bill Filler]

** No longer affects: dialer-app

** No longer affects: messaging-app

** Also affects: indicator-messages (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-messages in
Ubuntu.
https://bugs.launchpad.net/bugs/1367916

Title:
  Phone freezes when trying to active the dialer app from the messaging
  menu

Status in The Messaging Menu:
  New
Status in “indicator-messages” package in Ubuntu:
  New

Bug description:
  How to reproduce
  ==

  1 - Make sure that you have a missing call/voice message in your messaging 
indicator
  2 - Launch the dialer app
  3 - Lock your phone
  4 - From the lock screen open the messaging menu
  5 - Click to expand the message
  6 - Click on the icon in the top right

  Expected
  ==

  The dialer app appears with the phone pre-populated

  Current
  ===

  The phone freezes and stop to accept any input.

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-messages/+bug/1367916/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374082] Re: Implement and expose UnlockModem(objectPath) to dbus

[Bill Filler]

this is needed for dual-sim phones by the messaging-app and dialer-app
as they need to provide the ability to the user to unlock a specific sim

** Also affects: indicator-network (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: indicator-network (Ubuntu)
   Importance: Undecided => High

** Changed in: indicator-network
   Importance: Undecided => High

** Tags added: rtm14

** Summary changed:

- Implement and expose UnlockModem(objectPath) to dbus
+ no API to unlock a specific sim

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-network in
Ubuntu.
https://bugs.launchpad.net/bugs/1374082

Title:
  no API to unlock a specific sim

Status in Network Menu:
  New
Status in “indicator-network” package in Ubuntu:
  New

Bug description:
  In dialer-app on dual sim phones users will be given an option to unlock a 
specific modem.
  The current api only supports unlocking all modems at once: 
UnlockAllModems(). We need a way to invoke the unlock screen to a specific 
modem, like UnlockModem(objectPath).

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-network/+bug/1374082/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373225] Re: Unity Control Center icons in the dash don't point to the right section in the Control Center

[Gunnar Hjalmarsson]

What if you uninstall the gnome-control-center package?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/1373225

Title:
  Unity Control Center icons in the dash don't point to the right
  section in the Control Center

Status in One Hundred Papercuts:
  Triaged
Status in Unity:
  Won't Fix
Status in “unity” package in Ubuntu:
  Triaged
Status in “unity-control-center” package in Ubuntu:
  Triaged

Bug description:
  
  HOW TO REPRODUCE
  

  - In the dash, open one of these applications: Notifications, Online
  Accounts, Privacy, Security, Sharing.

  
  **
  EXPECTED BEHAVIOUR
  **

  - Going to the right section in the Control Center.

  
  **
  REAL BEHAVIOUR
  **

  - You go to the main page in the Control Center.

  
  
  RELEVANT DETAILS
  

  - Old icons are still there, and should be removed too.

  **
  TECHNICAL INFO
  **

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity-control-center 14.10.0+14.10.20140922-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-17.23-generic 3.16.3
  Uname: Linux 3.16.0-17-generic x86_64
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Sep 24 06:43:11 2014
  InstallationDate: Installed on 2013-05-21 (490 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  SourcePackage: unity-control-center
  UpgradeStatus: Upgraded to utopic on 2014-09-24 (0 days ago)
  usr_lib_unity-control-center:
   activity-log-manager 0.9.7-0ubuntu15
   deja-dup 32.0-0ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/hundredpapercuts/+bug/1373225/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374215] Re: Can't invoke UnlockAllModems() twice via dbus

[Bill Filler]

** Tags added: rtm14

** Changed in: indicator-network
   Importance: Undecided => Critical

** Also affects: indicator-network (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: indicator-network (Ubuntu)
   Importance: Undecided => Critical

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-network in
Ubuntu.
https://bugs.launchpad.net/bugs/1374215

Title:
  Can't invoke UnlockAllModems() twice via dbus

Status in Network Menu:
  New
Status in “indicator-network” package in Ubuntu:
  New

Bug description:
  Dialer-app now calls UnlockAllModems() when needed via dbus, but it
  only works for the first time. If I call the method once and then
  cancel the sim unlock screen, I can't call it again. The method just
  returns and the sim unlock screen never appears.

  Also, I noticed that after that sometimes the contents of the network
  indicator simply disappears as if the service was not running, but it
  in fact is. No crashes are observed.

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-network/+bug/1374215/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Ryan Tucker]

For completeness, I've opened Bug #1374207 on the issue with trusty.
Good news is that lucid and precise seem OK.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  Confirmed

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1263278] Re: Use FFmpeg instead of Libav

[Timothy Gu]

FYI, Debian has accepted ffmpeg to experimental. It is expected to go
into Ubuntu as well after the migration from experimental to unstable.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libav in Ubuntu.
https://bugs.launchpad.net/bugs/1263278

Title:
  Use FFmpeg instead of Libav

Status in “libav” package in Ubuntu:
  Won't Fix
Status in “libav” package in Debian:
  Fix Released

Bug description:
  Libav is supposed to be a drop-in replacement of FFmpeg.
  However, it isn't.
  For example, many software uses libswresample, it is simply missing in Libav.
  
http://stackoverflow.com/questions/12651816/libswresample-in-recent-ubuntu-version
  https://github.com/hrydgard/ppsspp/issues/2322

  BTW, the mindset of Libav is annoying at best.
  http://blog.pkh.me/p/13-the-ffmpeg-libav-situation.html
  
http://stackoverflow.com/questions/9477115/who-can-tell-me-the-difference-and-relation-between-ffmpeg-libav-and-avconv

  So I hope that Ubuntu can switch back to FFmpeg; let more software build.
  Debian's political preference, e.g., Iceweasel, shouldn't affect a lot of 
Ubuntu users out there.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libav/+bug/1263278/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: bash (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  Confirmed

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Harry Willis]

Re the above: the patch was *not* correctly applied in trusty package
bash_4.3-7ubuntu1.2.

lucid package bash_4.3-7ubuntu1.2 appears to have been upgraded fine,
and handles the test case correctly.

harry@mars:~$ md5sum Downloads/bash_4.3-7ubuntu1.1_amd64/bin/bash 
Downloads/bash_4.3-7ubuntu1.2_amd64/bin/bash
3c263963be49239e113a5794d54b732a Downloads/bash_4.3-7ubuntu1.1_amd64/bin/bash
3c263963be49239e113a5794d54b732a Downloads/bash_4.3-7ubuntu1.2_amd64/bin/bash

harry@mars:~$ md5sum Downloads/bash_4.2-2ubuntu2.2_amd64/bin/bash 
Downloads/bash_4.2-2ubuntu2.3_amd64/bin/bash 
d63ff62f142e76205e89e4a4de553fec  Downloads/bash_4.2-2ubuntu2.2_amd64/bin/bash
5ee533c7cd3a8246b4a3d7a29ffbe0b2  Downloads/bash_4.2-2ubuntu2.3_amd64/bin/bash

harry@mars:~$ env -i PATH="Downloads/bash_4.2-2ubuntu2.3_amd64/bin:$PATH" X='() 
{ (a)=>\' bash -c 'echo date'; cat echo
bash: X: line 1: syntax error near unexpected token `='
bash: X: line 1: `'
bash: error importing function definition for `X'
date
cat: echo: No such file or directory

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  Confirmed

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374207] Re: CVE-2014-7169 fix not effective on trusty

[Ryan Tucker]

This has been commented publicly on bug #1373781, and is also becoming
common knowledge on IRC.  Switching bug visibility to Public.

** Information type changed from Private Security to Public Security

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1374207

Title:
  CVE-2014-7169 fix not effective on trusty

Status in “bash” package in Ubuntu:
  New

Bug description:
  I can reproduce the testcase from 1373781 with bash 4.3-7ubuntu1.2 on
  trusty.  The patch did NOT fix it, unfortunately.

  rtucker@racer-x:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=1000(rtucker) gid=1000(rtucker) 
groups=1000(rtucker),4(adm),6(disk),24(cdrom),27(sudo),30(dip),46(plugdev),112(lpadmin),119(sambashare)
  rtucker@racer-x:~$ bash --version
  GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2013 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@racer-x:~$ apt-cache policy bash
  bash:
Installed: 4.3-7ubuntu1.2
Candidate: 4.3-7ubuntu1.2
Version table:
   *** 4.3-7ubuntu1.2 0
  500 http://mirrors.linode.com/ubuntu/ trusty-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ trusty-security/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.3-6ubuntu1 0
  500 http://mirrors.linode.com/ubuntu/ trusty/main amd64 Packages

  
  precise does seem fixed, however:

  rtucker@barleywine:~$ rm -f echo && env -i X='() { (a)=>\' bash -c 'echo id'; 
cat echo
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id
  cat: echo: No such file or directory
  rtucker@barleywine:~$ bash --version
  GNU bash, version 4.2.25(1)-release (x86_64-pc-linux-gnu)
  Copyright (C) 2011 Free Software Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later 

  This is free software; you are free to change and redistribute it.
  There is NO WARRANTY, to the extent permitted by law.
  rtucker@barleywine:~$ apt-cache policy bash
  bash:
Installed: 4.2-2ubuntu2.3
Candidate: 4.2-2ubuntu2.3
Version table:
   *** 4.2-2ubuntu2.3 0
  500 http://mirrors.linode.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://mirrors.linode.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   4.2-2ubuntu2 0
  500 http://mirrors.linode.com/ubuntu/ precise/main amd64 Packages
  500 http://us.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1374207/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 388508] Re: Ctrl+Tab to change tab in Nautilus

[Bug Watch Updater]

** Changed in: gtk
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/388508

Title:
  Ctrl+Tab to change tab in Nautilus

Status in GTK+ GUI Toolkit:
  Fix Released
Status in One Hundred Papercuts:
  Invalid
Status in Nautilus:
  Won't Fix
Status in “gtk+3.0” package in Ubuntu:
  Triaged
Status in “nautilus” package in Ubuntu:
  Won't Fix

Bug description:
  Ctrl+Tab = change tab in Nautilus like firefox. Thanks!

To manage notifications about this bug go to:
https://bugs.launchpad.net/gtk/+bug/388508/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1290327] Re: media_codec_create_by_codec_type is not exposed

[mmk]

I've played around with XBMC media player using android hw video decoding, and 
used that function in the player.
While currently i don't use it, it would be a good idea to expose it for cases 
like this, when somebody needs it.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libhybris in Ubuntu.
https://bugs.launchpad.net/bugs/1290327

Title:
  media_codec_create_by_codec_type is not exposed

Status in “libhybris” package in Ubuntu:
  Opinion

Bug description:
  media_codec_create_by_codec_type is implemented but not exposed.

  In hybris/media/media.c, adding:

   HYBRIS_IMPLEMENT_FUNCTION1(media, MediaCodecDelegate,
  media_codec_create_by_codec_type, const char*);

  enables the use of media_codec_create_by_codec_type, otherwise using
  it results in linker error.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libhybris/+bug/1290327/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373781] Re: bash incomplete fix for CVE-2014-6271

[Harry Willis]

Marc, I've just upgraded to 4.3.7-ubuntu1.2 in trusty
(https://launchpad.net/ubuntu/+source/bash/4.3-7ubuntu1.2) which I
assume was supposed to protect against the test case provided for
CVE-2014-7169. It doesn't appear to have done so. Confirmed that the
upgrade was successfully applied.

harry@mars:~ aptitude show bash | egrep '^Version'
Version: 4.3-7ubuntu1.2

harry@mars:~$ md5sum /bin/bash Downloads/bash_4.3-7ubuntu1.2_amd64/bin/bash 
3c263963be49239e113a5794d54b732a  /bin/bash
3c263963be49239e113a5794d54b732a  Downloads/bash_4.3-7ubuntu1.2_amd64/bin/bash

harry@mars:~$ cat echo
cat: echo: No such file or directory

harry@mars:~$ env -i X='() { (a)=>\' bash -c 'echo date'
bash: X: line 1: syntax error near unexpected token `='
bash: X: line 1: `'
bash: error importing function definition for `X'

harry@mars:~$ cat echo
Fri Sep 26 00:38:09 BST 2014

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/1373781

Title:
  bash incomplete fix for CVE-2014-6271

Status in “bash” package in Ubuntu:
  Confirmed

Bug description:
  The fixes for CVE-2014-6271 do NOT work! Security vuln, but should be
  public, this is known already.

  Ubuntu 14.04 LTS: bash 4.3-7ubuntu1.1
  Ubuntu 12.04 LTS: bash 4.2-2ubuntu2.2
  Ubuntu 10.04 LTS: bash 4.1-2ubuntu3.1

  Testcase:
  rm -f echo && env -i  X='() { (a)=>\' bash -c 'echo id'; cat echo

  expected output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  id

  actual output:
  bash: X: line 1: syntax error near unexpected token `='
  bash: X: line 1: `'
  bash: error importing function definition for `X'
  uid=0(root) gid=0(root) groups=0(root)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bash/+bug/1373781/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1322150] Re: Some tests became extremely flaky

[Michi Henning]

We haven't seen any more of these failures for some time, after lots of
fixes to the tests and run time. There are still sporadic failures due
to the Zmq context shut-down. We'll track these down eventually. For
now, I'm closing this bug. For any test failures we see from here on,
let's open separate bugs for each.

** Changed in: unity-scopes-api (Ubuntu)
   Status: In Progress => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-api in
Ubuntu.
https://bugs.launchpad.net/bugs/1322150

Title:
  Some tests became extremely flaky

Status in “unity-scopes-api” package in Ubuntu:
  Fix Released

Bug description:
  Some tests became extremely flaky recently - namely  RegistryI,
  Runtime, IdleShutdown, Invocation.

  They are disabled for now with https://code.launchpad.net/~stolowski
  /unity-scopes-api/disable-flaky-tests/+merge/220624

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-scopes-api/+bug/1322150/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374206] [NEW] Need socket garabage collector

[Michi Henning]

Public bug reported:

We need to add a GC for the outgoing oneway connection pool to stop Zmq
from indefinitely trying to reconnect once the target process has
exited.

** Affects: unity-scopes-api (Ubuntu)
 Importance: Undecided
 Assignee: Michi Henning (michihenning)
 Status: In Progress

** Changed in: unity-scopes-api (Ubuntu)
   Status: New => In Progress

** Changed in: unity-scopes-api (Ubuntu)
 Assignee: (unassigned) => Michi Henning (michihenning)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-api in
Ubuntu.
https://bugs.launchpad.net/bugs/1374206

Title:
  Need socket garabage collector

Status in “unity-scopes-api” package in Ubuntu:
  In Progress

Bug description:
  We need to add a GC for the outgoing oneway connection pool to stop
  Zmq from indefinitely trying to reconnect once the target process has
  exited.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-scopes-api/+bug/1374206/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1372006] Re: pci_devices does not terminate at computer shutdown

[ahau]

** Description changed:

  Shutdown does not halt on my Dell Precision 390
  the shutdown sequence prints on the console:
  
  mount: / is busy
  
  /etc/init.d/sendsigs does not terminate systemd-udevd
  
  Only solution: enable and use ALT-SYSREQ REISUB (to keep the root fs
  clean)
  
  I tried to change GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub  (+
  update-grub):
  
  GRUB_CMDLINE_LINUX_DEFAULT="quiet nosplash reboot=pci"  or
  GRUB_CMDLINE_LINUX_DEFAULT="quiet nosplash reboot=bios" or
  GRUB_CMDLINE_LINUX_DEFAULT="quiet nosplash acpi=force
  
  Shutdown still hangs with 'mount: / is busy'
  I even updated the BIOS from 2.0.4 to 2.06, no luck.
  
  When booting from a Knoppix 6.0.1 CD with a 2.6 kernel,  shutdown works
  and halts the system to poweroff state.
  
  Any ideas?
  
  Thanks
-   ahau
+   ahau
  
  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: pm-utils 1.4.1-13ubuntu0.1
  ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6
  Uname: Linux 3.13.0-35-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: amd64
  Date: Sun Sep 21 02:58:10 2014
  ExecutablePath: /usr/lib/pm-utils/power.d/pci_devices
  InstallationDate: Installed on 2014-09-19 (1 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  InterpreterPath: /bin/dash
  OmitPids: 11761 308 302 11767 723 714 11890 11767 723 714 11890
  PackageArchitecture: all
  ProcCmdline: /bin/sh /usr/lib/pm-utils/power.d/pci_devices false
  ProcEnviron:
-  LC_COLLATE=C
-  PATH=(custom, no user)
+  LC_COLLATE=C
+  PATH=(custom, no user)
  SourcePackage: pm-utils
  Title: pci_devices does not terminate at computer shutdown
  UpgradeStatus: No upgrade log present (probably fresh install)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pm-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1372006

Title:
  pci_devices does not terminate at computer shutdown

Status in “pm-utils” package in Ubuntu:
  New

Bug description:
  Shutdown does not halt on my Dell Precision 390
  the shutdown sequence prints on the console:

  mount: / is busy

  /etc/init.d/sendsigs does not terminate systemd-udevd

  Only solution: enable and use ALT-SYSREQ REISUB (to keep the root fs
  clean)

  I tried to change GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub  (+
  update-grub):

  GRUB_CMDLINE_LINUX_DEFAULT="quiet nosplash reboot=pci"  or
  GRUB_CMDLINE_LINUX_DEFAULT="quiet nosplash reboot=bios" or
  GRUB_CMDLINE_LINUX_DEFAULT="quiet nosplash acpi=force

  Shutdown still hangs with 'mount: / is busy'
  I even updated the BIOS from 2.0.4 to 2.06, no luck.

  When booting from a Knoppix 6.0.1 CD with a 2.6 kernel,  shutdown
  works and halts the system to poweroff state.

  Any ideas?

  Thanks
    ahau

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: pm-utils 1.4.1-13ubuntu0.1
  ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6
  Uname: Linux 3.13.0-35-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: amd64
  Date: Sun Sep 21 02:58:10 2014
  ExecutablePath: /usr/lib/pm-utils/power.d/pci_devices
  InstallationDate: Installed on 2014-09-19 (1 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  InterpreterPath: /bin/dash
  OmitPids: 11761 308 302 11767 723 714 11890 11767 723 714 11890
  PackageArchitecture: all
  ProcCmdline: /bin/sh /usr/lib/pm-utils/power.d/pci_devices false
  ProcEnviron:
   LC_COLLATE=C
   PATH=(custom, no user)
  SourcePackage: pm-utils
  Title: pci_devices does not terminate at computer shutdown
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1372006/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1365544] Re: Non-favorited scopes are not refreshed

[Alejandro J. Cura]

Setting to Critical, because this will be seen by every person
installing an app and staying in the apps scope.

** Tags removed: touch-2014-09-25
** Tags added: touch-2014-10-02

** Changed in: unity-scopes-shell (Ubuntu)
   Importance: High => Critical

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1365544

Title:
  Non-favorited scopes are not refreshed

Status in “unity-scopes-shell” package in Ubuntu:
  New

Bug description:
  How to reproduce:

  - Go to the store scope. 
  - Make sure it's not favorited. If it is favorited, unfav it then leave the 
scope and return to it.
  - Tap on the icon of some "FREE" app that is not installed.
  - On the preview of the app, tap on "Install", and wait for the installation 
to finish.
  - Click on the "<" button on the preview header to go back to the results.

  What happens:
  - The icon attributes still show "FREE"

  What should happen:
  - The scope should have been refreshed, and "✔INSTALLED" should be shown 
instead

  This works ok for scopes that are favorited.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-scopes-shell/+bug/1365544/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1350093] Re: [UX performance] Opening Accounts settings from the scope does not take you directly to Ubuntu One new account page

[Alejandro J. Cura]

** Tags removed: touch-2014-09-25
** Tags added: touch-2014-10-02

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-system-settings-
online-accounts in Ubuntu.
https://bugs.launchpad.net/bugs/1350093

Title:
  [UX performance] Opening Accounts settings from the scope does not
  take you directly to Ubuntu One new account page

Status in “ubuntu-system-settings-online-accounts” package in Ubuntu:
  Invalid
Status in “unity-scope-click” package in Ubuntu:
  Triaged

Bug description:
  Steps to reproduce:

  * Remove the Ubuntu one account from the phone
  * Try to install an app from the app store
  * It will tell you that you need to set up an account
  * Click the "Add account" button

  Expected result:
  Account setup for Ubuntu One should open

  Actual result:
  A selection of all possible accounts is presented which leads to confusion 
for new users, not knowing what account to select.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-system-settings-online-accounts/+bug/1350093/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1373225] Re: Unity Control Center icons in the dash don't point to the right section in the Control Center

[Treviño]

I don't think it is an unity issue, but it might be unity-control-center
problem instead.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/1373225

Title:
  Unity Control Center icons in the dash don't point to the right
  section in the Control Center

Status in One Hundred Papercuts:
  Triaged
Status in Unity:
  Won't Fix
Status in “unity” package in Ubuntu:
  Triaged
Status in “unity-control-center” package in Ubuntu:
  Triaged

Bug description:
  
  HOW TO REPRODUCE
  

  - In the dash, open one of these applications: Notifications, Online
  Accounts, Privacy, Security, Sharing.

  
  **
  EXPECTED BEHAVIOUR
  **

  - Going to the right section in the Control Center.

  
  **
  REAL BEHAVIOUR
  **

  - You go to the main page in the Control Center.

  
  
  RELEVANT DETAILS
  

  - Old icons are still there, and should be removed too.

  **
  TECHNICAL INFO
  **

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity-control-center 14.10.0+14.10.20140922-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-17.23-generic 3.16.3
  Uname: Linux 3.16.0-17-generic x86_64
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Sep 24 06:43:11 2014
  InstallationDate: Installed on 2013-05-21 (490 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  SourcePackage: unity-control-center
  UpgradeStatus: Upgraded to utopic on 2014-09-24 (0 days ago)
  usr_lib_unity-control-center:
   activity-log-manager 0.9.7-0ubuntu15
   deja-dup 32.0-0ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/hundredpapercuts/+bug/1373225/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374198] [NEW] gallery app crashes after closing app, takes a long time to open after crash

[Chris Gagnon]

Public bug reported:

Summary:
gallery app crashes after closing app, it takes a long time to open after the 
crash

Steps:
1. take a lot of pictures with the camera app
2. open gallery app
3. quickly close gallery app (swipe left and up)
4. repeat steps 2 and 3 until crash file is created in /var/crash (most of the 
time it's not needed)

Expected result:
app does not crash

actual result:
app crashes

more version info @ https://errors.ubuntu.com/oops/b76be20c-4504-11e4
-8f7a-fa163e5bb1a2

current build number: 65
device name: krillin
channel: ubuntu-touch/ubuntu-rtm/14.09-proposed
last update: 2014-09-25 19:13:04
version version: 65
version ubuntu: 20140925.1
version device: 20140925-6623bf1
version custom: 1411603264

** Affects: gallery-app (Ubuntu)
 Importance: Critical
 Status: Confirmed


** Tags: qa-daily-testing qasoak rtm14

** Attachment added: 
"_usr_share_click_preinstalled_com.ubuntu.gallery_2.9.1.1076_gallery-app.32011.crash"
   
https://bugs.launchpad.net/bugs/1374198/+attachment/4215530/+files/_usr_share_click_preinstalled_com.ubuntu.gallery_2.9.1.1076_gallery-app.32011.crash

** Changed in: gallery-app (Ubuntu)
   Status: New => Confirmed

** Changed in: gallery-app (Ubuntu)
   Importance: Undecided => Critical

** Tags added: qa-daily-testing qasoak rtm14

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gallery-app in Ubuntu.
https://bugs.launchpad.net/bugs/1374198

Title:
  gallery app crashes after closing app, takes a long time to open after
  crash

Status in “gallery-app” package in Ubuntu:
  Confirmed

Bug description:
  Summary:
  gallery app crashes after closing app, it takes a long time to open after the 
crash

  Steps:
  1. take a lot of pictures with the camera app
  2. open gallery app
  3. quickly close gallery app (swipe left and up)
  4. repeat steps 2 and 3 until crash file is created in /var/crash (most of 
the time it's not needed)

  Expected result:
  app does not crash

  actual result:
  app crashes

  more version info @ https://errors.ubuntu.com/oops/b76be20c-4504-11e4
  -8f7a-fa163e5bb1a2

  current build number: 65
  device name: krillin
  channel: ubuntu-touch/ubuntu-rtm/14.09-proposed
  last update: 2014-09-25 19:13:04
  version version: 65
  version ubuntu: 20140925.1
  version device: 20140925-6623bf1
  version custom: 1411603264

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gallery-app/+bug/1374198/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371166] Re: HERE location does not work in browser, but works in osmtouch

[Selene Scriven]

Wow, first time I've ever seen location work on a krillin.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu-sensors in
Ubuntu.
https://bugs.launchpad.net/bugs/1371166

Title:
  HERE location does not work in browser, but works in osmtouch

Status in Oxide Webview:
  Fix Released
Status in Oxide 1.2 series:
  Fix Committed
Status in QT Ubuntu Sensors:
  Fix Released
Status in Web Browser App:
  Invalid
Status in “qtubuntu-sensors” package in Ubuntu:
  Fix Released

Bug description:
  On my N4 I can use our HERE provider to get a location fix using
  latest utopic image. I cannot get this to work in any browser maps
  (e.g. here.com maps.google.com etc.).

  Filing this bug to have this on our radar.

To manage notifications about this bug go to:
https://bugs.launchpad.net/oxide/+bug/1371166/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369652] Re: Can't open photos from My Pictures scope

[Launchpad Bug Tracker]

This bug was fixed in the package gallery-app - 0.0.67+14.10.20140925.3
~rtm-0ubuntu1

---
gallery-app (0.0.67+14.10.20140925.3~rtm-0ubuntu1) 14.09; urgency=low

  [ Bill Filler ]
  * using "Share" instead of "Share photo" in action as it may be a
video

  [ Arthur Mello ]
  * Add support for the photo and video url schema (LP: #1369652)

  [ Ubuntu daily release ]
  * New rebuild forced
 -- Ubuntu daily releaseThu, 25 Sep 2014 
20:23:30 +

** Changed in: gallery-app (Ubuntu RTM)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to url-dispatcher in Ubuntu.
https://bugs.launchpad.net/bugs/1369652

Title:
  Can't open photos from My Pictures scope

Status in Gallery App:
  In Progress
Status in “url-dispatcher” package in Ubuntu:
  Invalid
Status in “gallery-app” package in Ubuntu RTM:
  Fix Released

Bug description:
  From the My Photos scope, clicking on a picture does not correctly
  open it in the gallery-app. The problem is that any apps/scopes that
  use that request photos have no way to open them. Currently the scope
  tries to use file:/// urls and this does not work. The proposed
  solution is to use photo:// urls just like we've added for
  mediaplayer-app (see https://bugs.launchpad.net/mediaplayer-
  app/+bug/1340952)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gallery-app/+bug/1369652/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374030] Re: Dropbox crash on Ubuntu MATE Remix

[nadrimajstor]

I give up fighting web interface... patch file DOES have correct
whitespacing... Use:

sudo patch --backup /usr/bin/dropbox https://bugs.launchpad.net/bugs/1374030

Title:
  Dropbox crash on Ubuntu MATE Remix

Status in “gtk+3.0” package in Ubuntu:
  Confirmed

Bug description:
  I'm getting "Attempt to unlock mutex that was not locked" and a
  segfault when running Ubuntu MATE Remix 14.10.

  It seems this bug is reported elsewhere in a number of other packages
  and is a result of a change in GLib ≥ 2.41.

  I am told this patch can fix it.

  https://github.com/GNOME/gtk/commit/79c3ff3c4ed74bbcc820dac2d5180fa4d48d55ec

  Bug 1346299 & bug 1344386 are related (similar issue, different app).

  Note that as this is dropbox, we cannot easily fix there as it's
  proprietary.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1374030/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 988337] Re: two chromium icons on the launcher

[Václav Pavlík]

It happened to me too and I found a solution:

1) Open /usr/share/applications/google-chrome.desktop with sudo
privileges in some editor.

2) Open Chromium or Chrome browser. Does not matter, if it shows in a
different icon or not.

3) Open a terminal and type:

xprop | grep WM_CLASS

4) Your mouse pointer will change into a cross. With this cross click
anywhere inside the Chrome/ium window. Something like this will show up
in the terminal:

WM_CLASS(STRING) = "Google-chrome-stable", "Google-chrome-stable"

5) In the editor, in which you opened the *.desktop file, write on the
second line (after the [Desktop Entry]):

StartupWMClass=Google-chrome-stable

or StartupWMClass=whatever was in the terminal output (in either of the
quotes).

6)Save the file and the result should be seen immediately.

Cheers.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/988337

Title:
  two chromium icons on the launcher

Status in Unity:
  Confirmed
Status in “unity” package in Ubuntu:
  Confirmed

Bug description:
  edubuntu usb live - english version - I run ubuntu-bug to signal a
  bug. Chromium is my default browser. When launchpad page is opened to
  let me describe the bug, an additional chromium icon is put on my
  laucher. See attachment.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: unity 5.10.0-0ubuntu6
  ProcVersionSignature: Ubuntu 3.2.0-23.36-generic-pae 3.2.14
  Uname: Linux 3.2.0-23-generic-pae i686
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.0.1-0ubuntu5
  Architecture: i386
  CasperVersion: 1.315
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  Date: Wed Apr 25 15:54:19 2012
  DistUpgraded: Fresh install
  DistroCodename: precise
  DistroVariant: ubuntu
  GraphicsCard:
   Advanced Micro Devices [AMD] nee ATI Radeon Mobility X1400 [1002:7145] 
(prog-if 00 [VGA controller])
 Subsystem: Fujitsu Technology Solutions Device [1734:10b0]
  LiveMediaBuild: Edubuntu 12.04 LTS "Precise Pangolin" - Release i386 
(20120423)
  MachineType: FUJITSU SIEMENS AMILO Pi 1556
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true persistent 
file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet 
splash --
  SourcePackage: unity
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/19/2007
  dmi.bios.vendor: FUJITSU SIEMENS
  dmi.bios.version: 1.25
  dmi.board.name: AMILO Pi 1556
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: Not Applicable
  dmi.chassis.type: 10
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: AMILO Pi 1556
  dmi.modalias: 
dmi:bvnFUJITSUSIEMENS:bvr1.25:bd07/19/2007:svnFUJITSUSIEMENS:pnAMILOPi1556:pvrNotApplicable:rvnFUJITSUSIEMENS:rnAMILOPi1556:rvrNotApplicable:cvnFUJITSUSIEMENS:ct10:cvrAMILOPi1556:
  dmi.product.name: AMILO Pi 1556
  dmi.product.version: Not Applicable
  dmi.sys.vendor: FUJITSU SIEMENS
  version.compiz: compiz 1:0.9.7.6-0ubuntu1
  version.libdrm2: libdrm2 2.4.32-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/988337/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1374183] [NEW] Dash is being drawn underneath application surface

[Gerry Boland]

Public bug reported:

Steps to repro:
1. Install  qt3d5-examples package
2. Run the following command:

/usr/lib/arm-linux-gnueabihf/qt5/examples/qt3d/cylinder
--desktop_file_hint=/usr/share/applications/mediaplayer-app.desktop


You'll see a cylinder on screen, but the dash underneath it. 

By rights
1) the application surface should not have alpha enabled
2) the dash should not be drawing underneath an application surface.

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1374183

Title:
  Dash is being drawn underneath application surface

Status in “unity8” package in Ubuntu:
  New

Bug description:
  Steps to repro:
  1. Install  qt3d5-examples package
  2. Run the following command:

  /usr/lib/arm-linux-gnueabihf/qt5/examples/qt3d/cylinder
  --desktop_file_hint=/usr/share/applications/mediaplayer-app.desktop

  
  You'll see a cylinder on screen, but the dash underneath it. 

  By rights
  1) the application surface should not have alpha enabled
  2) the dash should not be drawing underneath an application surface.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1374183/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1325402] Re: Apps fail to install until you signout/signin to U1

[Rodney Dawes]

Actually, looks like this is about updates, so should go to system-
settings.

** Package changed: unity-scope-click (Ubuntu) => ubuntu-system-settings
(Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scope-click in
Ubuntu.
https://bugs.launchpad.net/bugs/1325402

Title:
  Apps fail to install until you signout/signin to U1

Status in “ubuntu-system-settings” package in Ubuntu:
  New

Bug description:
  There's a new version of filemanager in the store (0.3.193). 
  On my phone it shows up in the list of updates but never downloads.

  2014-06-01 14:12:25,704 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 14:12:26,296 - WARNING - 
file:///usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/ListItems/SingleControl.qml:59:14:
 Unable to assign [undefined] to bool
  creating surface at (0, 58) with size (768, 1222) with title 'Window 
1'2014-06-01 14:12:26,459 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:49:03,966 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:49:04,522 - WARNING - 
file:///usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/ListItems/SingleControl.qml:59:14:
 Unable to assign [undefined] to bool
  creating surface at (0, 58) with size (768, 1222) with title 'Window 
1'2014-06-01 18:49:04,650 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:49:09,365 - WARNING - 
file:///usr/share/ubuntu/settings/system/qml-plugins/SystemSettings/BrightnessSlider.qml:28:25:
 Unable to assign [undefined] to int
  2014-06-01 18:51:55,783 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:51:56,344 - WARNING - 
file:///usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/ListItems/SingleControl.qml:59:14:
 Unable to assign [undefined] to bool
  creating surface at (0, 58) with size (768, 1222) with title 'Window 
1'2014-06-01 18:51:56,490 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:53:56,897 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:53:57,529 - WARNING - 
file:///usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/ListItems/SingleControl.qml:59:14:
 Unable to assign [undefined] to bool
  creating surface at (0, 58) with size (768, 1222) with title 'Window 
1'2014-06-01 18:53:57,654 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:59:11,717 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1 
  2014-06-01 18:59:12,254 - WARNING - 
file:///usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/ListItems/SingleControl.qml:59:14:
 Unable to assign [undefined] to bool
  creating surface at (0, 58) with size (768, 1222) with title 'Window 
1'2014-06-01 18:59:12,425 - CRITICAL - 
../../../../lib/SignOn/connection-manager.cpp 106 setupSocketConnection p2p 
error: QDBusError("org.freedesktop.DBus.Error.FileNotFound", "Failed to connect 
to socket /run/user/32011/signond/socket: No such file or directory") 1

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: ubuntu-system-settings 0.1+14.10.20140521-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.3-0ubuntu1
  Architecture: armhf
  Date: Sun Jun  1 19:01:07 2014
  InstallationDate: Instal

[Touch-packages] [Bug 1361114] Re: [Greeter] Says "Enter your PIN" when i have no PIN (there's not even a SIM card on the phone)

[Michael Terry]

@Antti, there is a branch in progress for that:
https://code.launchpad.net/~mterry/ubuntu-system-settings/wizard-
refresh-take-6/+merge/235720

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1361114

Title:
  [Greeter] Says "Enter your PIN" when i have no PIN (there's not even a
  SIM card on the phone)

Status in Ubuntu UX bugs:
  Fix Released
Status in The Unity 8 shell:
  Fix Released
Status in “ubuntu-system-settings” package in Ubuntu:
  Invalid
Status in “unity8” package in Ubuntu:
  Fix Released
Status in “unity8” package in Ubuntu RTM:
  Fix Released

Bug description:
  See http://i.imgur.com/JORXscB.png i guess it should say "Enter your
  passcode" or something, PIN is something that i totally associate with
  SIM PIN in the phone context

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1361114/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1237614] Re: [sdk] echo last character entered in password fields

[kevin gunn]

** Tags removed: touch-2014-09-25
** Tags added: touch-2014-10-02

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1237614

Title:
  [sdk] echo last character entered in password fields

Status in Ubuntu UX bugs:
  Fix Committed
Status in “qtubuntu” package in Ubuntu:
  In Progress
Status in “ubuntu-ui-toolkit” package in Ubuntu:
  Invalid

Bug description:
  The new UI in build 89 uses the snap decision for connecting, and the 
password entry is different as there is no longer an option to see the password 
as it is entered.
  I had to enter my 23 character passphrase 3 times as I could not reliably hit 
the correct keys.
  All other modern interfaces show the characters. Best approach could be show 
the last character entered only, as most UIs do.

  -- SOLUTION --
  This bug applies to a number of use cases: passwords, PINs, passphrases, etc. 
Here's the desired solution:

  
https://docs.google.com/a/canonical.com/document/d/1nFm8xiYhKXXuEO_IvMXoD0lASbYzYXva1BWMVanU3iw/edit#bookmark=id.vwnd3zjsq4x1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1237614/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1318144] Re: Can't edit reviews

[Alejandro J. Cura]

** Changed in: unity-scope-click (Ubuntu)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scope-click in
Ubuntu.
https://bugs.launchpad.net/bugs/1318144

Title:
  Can't edit reviews

Status in Ratings and Reviews server:
  Triaged
Status in “unity-scope-click” package in Ubuntu:
  New

Bug description:
  It seems impossible to edit reviews at the moment. I get the review
  entry even though I reviewed already and I'm allowed to send another
  review, which actually gets lost somewhere.

  I imagine we want to limit the number of reviews to 1 per U1 account,
  but it should be possible to send a new/modified one. Maybe the review
  entry should be pre-filled with the previous review so it's obvious
  you can edit?

To manage notifications about this bug go to:
https://bugs.launchpad.net/rnr-server/+bug/1318144/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367802] Re: sharing a url is not displayed correctly in message view

[Michał Karnicki]

** Changed in: libqtelegram
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1367802

Title:
  sharing a url is not displayed correctly in message view

Status in Libqtelegram - a qt library to access telegram.:
  Fix Released
Status in Messaging App:
  Fix Released
Status in “messaging-app” package in Ubuntu:
  Fix Released

Bug description:
  build 23 on Krillin
  - open browser
  - go to mobile.nytimes.com
  - click one of the news stories displayed
  - after page loads, press the "Share" button from the Action menu
  - Select messaging-app
  - Note that the url looks correct while it's in the entry field
  - send the message

  Expected result:
  - the shared url should be shown correctly in the messaging thread

  Actual result:
  - the display of the url is all messed up, see the attached picture

  The url that is trying to be shared is:
  http://mobile.nytimes.com/2014/09/10/us/obama-isis-congress.html

To manage notifications about this bug go to:
https://bugs.launchpad.net/libqtelegram/+bug/1367802/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp