[Touch-packages] [Bug 1199571]
(In reply to Behdad Esfahbod from comment #4) > Looks like copying thread-local storage macros from pixman-compiler.h and > using them to use per-thread FT_Library might easily get most of this > resolved. I can take a look if no one else steps in. Hi Behdad, had you time to look at this already? Regards Marek -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1199571 Title: Huge multi-threading violations in cairo Status in libcairo - cairo vector graphics library: Confirmed Status in “cairo” package in Ubuntu: Triaged Bug description: Fresh dist-upgrade; brought up the dash, typed "term"; single clicked on the terminal app and _bang_. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: unity 7.0.2+13.10.20130705.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.10.0-2.10-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu4 Architecture: amd64 Date: Tue Jul 9 17:47:10 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/compiz InstallationDate: Installed on 2013-06-06 (33 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True ProcCmdline: compiz ProcEnviron: LANGUAGE=en_US PATH=(custom, user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7ff3b4ed7a10:mov%rdx,0x10(%rax) PC (0x7ff3b4ed7a10) ok source "%rdx" ok destination "0x10(%rax)" (0x0010) not located in a known VMA region (needed writable region)! Stack memory exhausted (SP below stack segment) SegvReason: writing NULL VMA Signal: 11 SourcePackage: unity StacktraceTop: ?? () from /usr/lib/x86_64-linux-gnu/libfreetype.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libfreetype.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libfreetype.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libfreetype.so.6 FT_Load_Glyph () from /usr/lib/x86_64-linux-gnu/libfreetype.so.6 Title: compiz crashed with SIGSEGV in FT_Load_Glyph() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/libcairo/+bug/1199571/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395439] [NEW] package libqt5gui5 5.3.0+dfsg-2ubuntu9 failed to install/upgrade: 80.3528:package libqt5gui5:amd64 is already installed and configured
Public bug reported: ProblemType: Package DistroRelease: Ubuntu 14.10 Package: libqt5gui5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 AptdaemonVersion: 1.1.1+bzr980-0ubuntu1 Architecture: amd64 Date: Sat Nov 22 12:22:36 2014 DuplicateSignature: package:libqt5gui5:5.3.0+dfsg-2ubuntu9:80.3528:package libqt5gui5:amd64 is already installed and configured ErrorMessage: 80.3528:package libqt5gui5:amd64 is already installed and configured InstallationDate: Installed on 2014-11-22 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) SourcePackage: qtbase-opensource-src Title: package libqt5gui5 5.3.0+dfsg-2ubuntu9 failed to install/upgrade: 80.3528:package libqt5gui5:amd64 is already installed and configured UpgradeStatus: Upgraded to utopic on 2014-11-22 (0 days ago) ** Affects: qtbase-opensource-src (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package dist-upgrade need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtbase-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1395439 Title: package libqt5gui5 5.3.0+dfsg-2ubuntu9 failed to install/upgrade: 80.3528:package libqt5gui5:amd64 is already installed and configured Status in “qtbase-opensource-src” package in Ubuntu: New Bug description: ProblemType: Package DistroRelease: Ubuntu 14.10 Package: libqt5gui5 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 AptdaemonVersion: 1.1.1+bzr980-0ubuntu1 Architecture: amd64 Date: Sat Nov 22 12:22:36 2014 DuplicateSignature: package:libqt5gui5:5.3.0+dfsg-2ubuntu9:80.3528:package libqt5gui5:amd64 is already installed and configured ErrorMessage: 80.3528:package libqt5gui5:amd64 is already installed and configured InstallationDate: Installed on 2014-11-22 (1 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2) SourcePackage: qtbase-opensource-src Title: package libqt5gui5 5.3.0+dfsg-2ubuntu9 failed to install/upgrade: 80.3528:package libqt5gui5:amd64 is already installed and configured UpgradeStatus: Upgraded to utopic on 2014-11-22 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1395439/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395444] [NEW] indicator-sound-service crashed with SIGSEGV
Public bug reported: indicator-sound-service crashes on startup in vivid, with gnome- flashback-metacity. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20141105-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME Date: Sun Nov 23 12:48:48 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service InstallationDate: Installed on 2014-08-23 (91 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140823) ProcCmdline: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x411fa3:mov(%rax),%rdi PC (0x00411fa3) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: indicator-sound StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: indicator-sound-service crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo ** Affects: indicator-sound (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-crash need-amd64-retrace vivid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395444 Title: indicator-sound-service crashed with SIGSEGV Status in “indicator-sound” package in Ubuntu: New Bug description: indicator-sound-service crashes on startup in vivid, with gnome- flashback-metacity. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20141105-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME Date: Sun Nov 23 12:48:48 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service InstallationDate: Installed on 2014-08-23 (91 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140823) ProcCmdline: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x411fa3: mov(%rax),%rdi PC (0x00411fa3) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: indicator-sound StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: indicator-sound-service crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395444/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395443] [NEW] package libgbm1:amd64 10.1.3-0ubuntu0.2 failed to install/upgrade: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamen
Public bug reported: This error appeared on login. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libgbm1:amd64 10.1.3-0ubuntu0.2 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Nov 20 09:12:55 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DuplicateSignature: package:libgbm1:amd64:10.1.3-0ubuntu0.2:il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. ErrorMessage: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:0511] NVIDIA Corporation GF108M [GeForce GT 540M] [10de:0df4] (rev ff) (prog-if ff) InstallationDate: Installed on 2014-09-06 (77 days ago) InstallationMedia: Ubuntu 14.04 "Trusty" - Build amd64 LIVE Binary 20140417-06:05 MachineType: Packard Bell EasyNote TS11HR ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=6fe06780-614a-4a70-b544-ab9a85e90b87 ro quiet splash acpi_backlight=vendor intel_pstate=enable SourcePackage: mesa Title: package libgbm1:amd64 10.1.3-0ubuntu0.2 failed to install/upgrade: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/02/2011 dmi.bios.vendor: Packard Bell dmi.bios.version: V1.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SJV50_HR dmi.board.vendor: Packard Bell dmi.board.version: Base Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Packard Bell dmi.chassis.version: V1.07 dmi.modalias: dmi:bvnPackardBell:bvrV1.07:bd03/02/2011:svnPackardBell:pnEasyNoteTS11HR:pvrV1.07:rvnPackardBell:rnSJV50_HR:rvrBaseBoardVersion:cvnPackardBell:ct10:cvrV1.07: dmi.product.name: EasyNote TS11HR dmi.product.version: V1.07 dmi.sys.vendor: Packard Bell version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.2 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.916+git20140915.d470f0f5-0ubuntu0sarvatt~trusty version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Sun Nov 23 10:32:02 2014 xserver.configfile: default xserver.errors: intel: Failed to load module "dri3" (module does not exist, 0) intel: Failed to load module "present" (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id9964 vendor AUO xserver.version: 2:1.15.1-0ubuntu2.1 ** Affects: mesa (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package compiz-0.9 need-duplicate-check trusty ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1395443 Title: package libgbm1:amd64 10.1.3-0ubuntu0.2 failed to install/upgrade: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. Status in “mesa” package in Ubuntu: New Bug description: This error appeared on login. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libgbm1:amd64 10.1.3-0ubuntu0.2 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Nov 20 09:12:55 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DuplicateSignature: package:libgbm1:amd64:10.1.3-0ubuntu0.2:il pacchetto s
[Touch-packages] [Bug 1395446] [NEW] ubuntu touch crashes after using bluetooth @ Nexus 4, Ubuntu 14.10 (r9)
Public bug reported: Steps to reproduce: 1. Reboot 2. Connect a bluetooth device (Creative D100) 3. Play some music 4. Disconnect a bluetooth device After some time rotating Ubuntu logo shows up. It disappears after some time, but no application could be launched after that. All windows show "loading...". Only reboot helps. Also I notices that if I disable bluetooth right after reboot it couldn't be enabled again until next reboot. Not sure if this issue is related or should be considered as separate bug. ** Affects: indicator-bluetooth (Ubuntu) Importance: Undecided Status: New ** Tags: audio avengers bluetooth -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-bluetooth in Ubuntu. https://bugs.launchpad.net/bugs/1395446 Title: ubuntu touch crashes after using bluetooth @ Nexus 4, Ubuntu 14.10 (r9) Status in “indicator-bluetooth” package in Ubuntu: New Bug description: Steps to reproduce: 1. Reboot 2. Connect a bluetooth device (Creative D100) 3. Play some music 4. Disconnect a bluetooth device After some time rotating Ubuntu logo shows up. It disappears after some time, but no application could be launched after that. All windows show "loading...". Only reboot helps. Also I notices that if I disable bluetooth right after reboot it couldn't be enabled again until next reboot. Not sure if this issue is related or should be considered as separate bug. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-bluetooth/+bug/1395446/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1166125] Re: Broken fonts for Gtk based applications
** Tags added: utopic ** Tags added: trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1166125 Title: Broken fonts for Gtk based applications Status in GTK+ GUI Toolkit: Unknown Status in Pango - Layout and Text Rendering LIbrary: Unknown Status in “gtk+2.0” package in Ubuntu: Invalid Status in “gtk+3.0” package in Ubuntu: Invalid Status in “pango-graphite” package in Ubuntu: Triaged Bug description: After upgrade from 12.10 to 13.04 beta of Ubuntu (Xubuntu), I am experiencing some issues. Like without me actually changing anything, my fonts are broken for some applications (most of them) and not for other (rxvt). See this http://i.imgur.com/ubVvr53.png As you can see, rxvt there is the only application with normal fonts. The Terminal application from Xfce suite is for some inexplicable reason using some kind of proportional font. See that the font in the Terminal Preferences is set to Liberation Mono. Also, please notice how in the Choose Terminal Font dialog the Courier New font Preview is not Courier New. To manage notifications about this bug go to: https://bugs.launchpad.net/gtk/+bug/1166125/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395443] Re: package libgbm1:amd64 10.1.3-0ubuntu0.2 failed to install/upgrade: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1395443 Title: package libgbm1:amd64 10.1.3-0ubuntu0.2 failed to install/upgrade: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. Status in “mesa” package in Ubuntu: New Bug description: This error appeared on login. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libgbm1:amd64 10.1.3-0ubuntu0.2 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Nov 20 09:12:55 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DuplicateSignature: package:libgbm1:amd64:10.1.3-0ubuntu0.2:il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. ErrorMessage: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:0511] NVIDIA Corporation GF108M [GeForce GT 540M] [10de:0df4] (rev ff) (prog-if ff) InstallationDate: Installed on 2014-09-06 (77 days ago) InstallationMedia: Ubuntu 14.04 "Trusty" - Build amd64 LIVE Binary 20140417-06:05 MachineType: Packard Bell EasyNote TS11HR ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=6fe06780-614a-4a70-b544-ab9a85e90b87 ro quiet splash acpi_backlight=vendor intel_pstate=enable SourcePackage: mesa Title: package libgbm1:amd64 10.1.3-0ubuntu0.2 failed to install/upgrade: il pacchetto si trova in uno stato di inconsistenza critico: è consigliato installarlo nuovamente prima di tentare la configurazione. UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/02/2011 dmi.bios.vendor: Packard Bell dmi.bios.version: V1.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SJV50_HR dmi.board.vendor: Packard Bell dmi.board.version: Base Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Packard Bell dmi.chassis.version: V1.07 dmi.modalias: dmi:bvnPackardBell:bvrV1.07:bd03/02/2011:svnPackardBell:pnEasyNoteTS11HR:pvrV1.07:rvnPackardBell:rnSJV50_HR:rvrBaseBoardVersion:cvnPackardBell:ct10:cvrV1.07: dmi.product.name: EasyNote TS11HR dmi.product.version: V1.07 dmi.sys.vendor: Packard Bell version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.2 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.916+git20140915.d470f0f5-0ubuntu0sarvatt~trusty version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Sun Nov 23 10:32:02 2014 xserver.configfile: default xserver.errors: intel: Failed to load module "dri3" (module does not exist, 0) intel: Failed to load module "present" (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id9964 vendor AUO xserver.version: 2:1.15.1-0ubuntu2.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1395443/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395447] [NEW] "No data sources available" not translated
Public bug reported: we should have "No data sources available" translated, but it doesn't show up in launchpad as a translatable string. No i18n.tr("No data sources available") ? ** Affects: unity8 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1395447 Title: "No data sources available" not translated Status in “unity8” package in Ubuntu: New Bug description: we should have "No data sources available" translated, but it doesn't show up in launchpad as a translatable string. No i18n.tr("No data sources available") ? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1395447/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395444] Stacktrace.txt
** Attachment added: "Stacktrace.txt" https://bugs.launchpad.net/bugs/1395444/+attachment/4266094/+files/Stacktrace.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395444 Title: indicator-sound-service crashed with SIGSEGV Status in “indicator-sound” package in Ubuntu: New Bug description: indicator-sound-service crashes on startup in vivid, with gnome- flashback-metacity. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20141105-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME Date: Sun Nov 23 12:48:48 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service InstallationDate: Installed on 2014-08-23 (91 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140823) ProcCmdline: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x411fa3: mov(%rax),%rdi PC (0x00411fa3) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: indicator-sound StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: indicator-sound-service crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395444/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395444] StacktraceSource.txt
** Attachment added: "StacktraceSource.txt" https://bugs.launchpad.net/bugs/1395444/+attachment/4266095/+files/StacktraceSource.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395444 Title: indicator-sound-service crashed with SIGSEGV Status in “indicator-sound” package in Ubuntu: New Bug description: indicator-sound-service crashes on startup in vivid, with gnome- flashback-metacity. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20141105-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME Date: Sun Nov 23 12:48:48 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service InstallationDate: Installed on 2014-08-23 (91 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140823) ProcCmdline: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x411fa3: mov(%rax),%rdi PC (0x00411fa3) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: indicator-sound StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: indicator-sound-service crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395444/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395444] ThreadStacktrace.txt
** Attachment added: "ThreadStacktrace.txt" https://bugs.launchpad.net/bugs/1395444/+attachment/4266096/+files/ThreadStacktrace.txt ** Tags added: apport-failed-retrace ** Tags removed: need-amd64-retrace -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395444 Title: indicator-sound-service crashed with SIGSEGV Status in “indicator-sound” package in Ubuntu: New Bug description: indicator-sound-service crashes on startup in vivid, with gnome- flashback-metacity. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20141105-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME Date: Sun Nov 23 12:48:48 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service InstallationDate: Installed on 2014-08-23 (91 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140823) ProcCmdline: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x411fa3: mov(%rax),%rdi PC (0x00411fa3) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: indicator-sound StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: indicator-sound-service crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395444/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395444]
StacktraceTop: volume_control_sink_info_cb_for_props (eol=, i=0x7fffc72cff20, c=, self=0x8c7110) at /build/buildd/indicator-sound-12.10.2+15.04.20141105/obj-x86_64-linux-gnu/src/volume-control.c:1020 _volume_control_sink_info_cb_for_props_pa_context_sinkinfocb (c=, i=0x7fffc72cff20, eol=, self=0x8c7110) at /build/buildd/indicator-sound-12.10.2+15.04.20141105/obj-x86_64-linux-gnu/src/volume-control.c:1123 ?? () ?? () ?? () -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395444 Title: indicator-sound-service crashed with SIGSEGV Status in “indicator-sound” package in Ubuntu: New Bug description: indicator-sound-service crashes on startup in vivid, with gnome- flashback-metacity. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20141105-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME Date: Sun Nov 23 12:48:48 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service InstallationDate: Installed on 2014-08-23 (91 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140823) ProcCmdline: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x411fa3: mov(%rax),%rdi PC (0x00411fa3) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: indicator-sound StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: indicator-sound-service crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395444/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395444] Re: indicator-sound-service crashed with SIGSEGV
** Changed in: indicator-sound (Ubuntu) Status: New => Invalid ** Attachment removed: "CoreDump.gz" https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395444/+attachment/4266085/+files/CoreDump.gz -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395444 Title: indicator-sound-service crashed with SIGSEGV Status in “indicator-sound” package in Ubuntu: Invalid Bug description: indicator-sound-service crashes on startup in vivid, with gnome- flashback-metacity. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: indicator-sound 12.10.2+15.04.20141105-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME Date: Sun Nov 23 12:48:48 2014 ExecutablePath: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service InstallationDate: Installed on 2014-08-23 (91 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140823) ProcCmdline: /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service ProcEnviron: TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x411fa3: mov(%rax),%rdi PC (0x00411fa3) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: indicator-sound StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: indicator-sound-service crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395444/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395450] [NEW] cannot adjust sound
Public bug reported: tried to purge and reinstall pulseaudio. When I try to start pulseaudio I get the following message: "Connection to PulseAudio failed. Automatic retry in 5 s In this case this is likely because PULSE_SERVER in the Environment/X11 Root Window Properties or default-server in client.conf is misconigured. This situation can also arrise [sic] when PulseAudio crashed and left stale details in the X11 Root Window. If this is the case, then PulseAudio should autospawn again, of if this is not configured you should run start-pulseaudio-x11 manually" I have no idea what this means and what I should do. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D1', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: Unity Date: Sun Nov 23 19:24:12 2014 InstallationDate: Installed on 2014-06-08 (168 days ago) InstallationMedia: It PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. SourcePackage: pulseaudio Symptom: audio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/27/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R0200Y3 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR0200Y3:bd08/27/2009:svnSonyCorporation:pnVGN-NS50B_W:pvrC6U0MVY9:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: VGN-NS50B_W dmi.product.version: C6U0MVY9 dmi.sys.vendor: Sony Corporation ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1395450 Title: cannot adjust sound Status in “pulseaudio” package in Ubuntu: New Bug description: tried to purge and reinstall pulseaudio. When I try to start pulseaudio I get the following message: "Connection to PulseAudio failed. Automatic retry in 5 s In this case this is likely because PULSE_SERVER in the Environment/X11 Root Window Properties or default-server in client.conf is misconigured. This situation can also arrise [sic] when PulseAudio crashed and left stale details in the X11 Root Window. If this is the case, then PulseAudio should autospawn again, of if this is not configured you should run start-pulseaudio-x11 manually" I have no idea what this means and what I should do. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D1', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: Unity Date: Sun Nov 23 19:24:12 2014 InstallationDate: Installed on 2014-06-08 (168 days ago) InstallationMedia: It PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. SourcePackage: pulseaudio Symptom: audio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/27/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R0200Y3 dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR0200Y3:bd08/27/2009:svnSonyCorporation:pnVGN-NS50B_W:pvrC6U0MVY9:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: VGN-NS50B_W dmi.product.version: C6U0MVY9 dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1395450/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395455] [NEW] indicator-sound-service crashes on vivid
Public bug reported: On vivid, indicator-sound-service crashes on startup. I am not using Unity, and I cat reproduce the crash reliably in a minimal environment (plain X with Metacity WM). (I recompiled indicator-sound with -g and -O0 to get an useful trace, thus not using apport-crash). ** Affects: indicator-sound (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 vivid ** Attachment added: "traceback.txt" https://bugs.launchpad.net/bugs/1395455/+attachment/4266117/+files/traceback.txt ** Description changed: On vivid, indicator-sound-service crashes on startup. I am not using Unity, and I cat reproduce the crash reliably in a minimal environment (plain X with Metacity WM). + + (I recompiled indicator-sound with -g and -O0 to get an useful trace, + thus not using apport-crash). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395455 Title: indicator-sound-service crashes on vivid Status in “indicator-sound” package in Ubuntu: New Bug description: On vivid, indicator-sound-service crashes on startup. I am not using Unity, and I cat reproduce the crash reliably in a minimal environment (plain X with Metacity WM). (I recompiled indicator-sound with -g and -O0 to get an useful trace, thus not using apport-crash). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395455/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1354924] Re: Networkmanager does not autoconnect to wireless network
I take my previous comment back. Debian unstable also does this. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1354924 Title: Networkmanager does not autoconnect to wireless network Status in “network-manager” package in Ubuntu: Confirmed Bug description: When adding a net wireless network and enable "connect automatically' networkmanager does not automatically connect to the network wenever possible. I'm running kubuntu 14.10 daily. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: network-manager 0.9.8.8-0ubuntu23 ProcVersionSignature: Ubuntu 3.16.0-6.11-generic 3.16.0-rc7 Uname: Linux 3.16.0-6-generic x86_64 ApportVersion: 2.14.5-0ubuntu4 Architecture: amd64 CurrentDesktop: KDE Date: Sun Aug 10 21:30:03 2014 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2014-07-11 (29 days ago) InstallationMedia: Kubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140710) IpRoute: default via 192.168.0.2 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.213 metric 9 SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1354924/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395455] Re: indicator-sound-service crashes on vivid
** Branch linked: lp:~mitya57/indicator-sound/lp1395455 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395455 Title: indicator-sound-service crashes on vivid Status in “indicator-sound” package in Ubuntu: Triaged Bug description: On vivid, indicator-sound-service crashes on startup. I am not using Unity, and I cat reproduce the crash reliably in a minimal environment (plain X with Metacity WM). (I recompiled indicator-sound with -g and -O0 to get an useful trace, thus not using apport-crash). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395455/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395455] Re: indicator-sound-service crashes on vivid
** Changed in: indicator-sound (Ubuntu) Status: New => Triaged ** Changed in: indicator-sound (Ubuntu) Assignee: (unassigned) => Dmitry Shachnev (mitya57) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1395455 Title: indicator-sound-service crashes on vivid Status in “indicator-sound” package in Ubuntu: Triaged Bug description: On vivid, indicator-sound-service crashes on startup. I am not using Unity, and I cat reproduce the crash reliably in a minimal environment (plain X with Metacity WM). (I recompiled indicator-sound with -g and -O0 to get an useful trace, thus not using apport-crash). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1395455/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1383737] Re: Bad version of python-clang in file cindex.py
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: llvm-toolchain-3.4 (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to llvm-toolchain-3.4 in Ubuntu. https://bugs.launchpad.net/bugs/1383737 Title: Bad version of python-clang in file cindex.py Status in “llvm-toolchain-3.4” package in Ubuntu: Confirmed Bug description: I have error: LibclangError: libclang-3.3.so: cannot open shared object file: No such file or directory. To provide a path to libclang use Config.set_library_path() or Config.set_library_file(). In file: /usr/lib/python2.7/dist-packages/clang/cindex.py In class Config we have function get_filename(self) , in this function in the last "else" is: file = 'libclang-3.3.so' I must improved version of libclang from 3.3 to 3.4. The line where is this error - 3361 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/llvm-toolchain-3.4/+bug/1383737/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1383737] Re: Bad version of python-clang in file cindex.py
Repeat with: $ python >>> import clang.cindex >>> index = clang.cindex.Index.create() Traceback (most recent call last): File "", line 1, in File "/usr/lib/python2.7/dist-packages/clang/cindex.py", line 2047, in create return Index(conf.lib.clang_createIndex(excludeDecls, 0)) File "/usr/lib/python2.7/dist-packages/clang/cindex.py", line 141, in __get__ value = self.wrapped(instance) File "/usr/lib/python2.7/dist-packages/clang/cindex.py", line 3344, in lib lib = self.get_cindex_library() File "/usr/lib/python2.7/dist-packages/clang/cindex.py", line 3375, in get_cindex_library raise LibclangError(msg) clang.cindex.LibclangError: libclang-3.3.so: cannot open shared object file: No such file or directory. To provide a path to libclang use Config.set_library_path() or Config.set_library_file(). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to llvm-toolchain-3.4 in Ubuntu. https://bugs.launchpad.net/bugs/1383737 Title: Bad version of python-clang in file cindex.py Status in “llvm-toolchain-3.4” package in Ubuntu: Confirmed Bug description: I have error: LibclangError: libclang-3.3.so: cannot open shared object file: No such file or directory. To provide a path to libclang use Config.set_library_path() or Config.set_library_file(). In file: /usr/lib/python2.7/dist-packages/clang/cindex.py In class Config we have function get_filename(self) , in this function in the last "else" is: file = 'libclang-3.3.so' I must improved version of libclang from 3.3 to 3.4. The line where is this error - 3361 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/llvm-toolchain-3.4/+bug/1383737/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395470] [NEW] upstart applet crashes init on login
Public bug reported: upstart init crash on startup and login to the ubuntu ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: upstart 1.5-0ubuntu7.2 ProcVersionSignature: Ubuntu 3.2.0-70.105-generic-pae 3.2.63 Uname: Linux 3.2.0-70-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.8 Architecture: i386 Date: Sun Nov 23 13:23:02 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-yanshui-precise-i386-20120615-0 InstallationMedia: Ubuntu 12.04 "Precise" - Failed to find casper uuid.conf in 'binary/casper/initrd.img-3.2.0-25-generic-pae.old-dkms' LIVE Binary 20120615-03:22 MarkForUpload: True SourcePackage: upstart UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: upstart (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 precise -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upstart in Ubuntu. https://bugs.launchpad.net/bugs/1395470 Title: upstart applet crashes init on login Status in “upstart” package in Ubuntu: New Bug description: upstart init crash on startup and login to the ubuntu ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: upstart 1.5-0ubuntu7.2 ProcVersionSignature: Ubuntu 3.2.0-70.105-generic-pae 3.2.63 Uname: Linux 3.2.0-70-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.8 Architecture: i386 Date: Sun Nov 23 13:23:02 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-yanshui-precise-i386-20120615-0 InstallationMedia: Ubuntu 12.04 "Precise" - Failed to find casper uuid.conf in 'binary/casper/initrd.img-3.2.0-25-generic-pae.old-dkms' LIVE Binary 20120615-03:22 MarkForUpload: True SourcePackage: upstart UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1395470/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1043298] Re: more information about errors on update failure
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: apt (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1043298 Title: more information about errors on update failure Status in restricted apt: New Status in “apt” package in Ubuntu: Confirmed Bug description: when i run apt-get update i get that error: W: GPG error: http://ppa.launchpad.net precise Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 99184AAECFB359B9 cause having a lot of LP repos enabled, i would appreciate if apt can give more information on the specific repo failed to be verified To manage notifications about this bug go to: https://bugs.launchpad.net/rapt/+bug/1043298/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395447] Re: "No data sources available" not translated
** Package changed: unity8 (Ubuntu) => libusermetrics (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libusermetrics in Ubuntu. https://bugs.launchpad.net/bugs/1395447 Title: "No data sources available" not translated Status in “libusermetrics” package in Ubuntu: New Bug description: we should have "No data sources available" translated, but it doesn't show up in launchpad as a translatable string. No i18n.tr("No data sources available") ? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libusermetrics/+bug/1395447/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1311403] Re: Can't type password after resume.
*** This bug is a duplicate of bug 1311316 *** https://bugs.launchpad.net/bugs/1311316 ** This bug has been marked a duplicate of bug 1311316 After locking screen there is no input field to type password for unlock -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1311403 Title: Can't type password after resume. Status in Unity: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: I couldn't type password after resume - no characters displayed this time. I had to Ctrl+alt+f2 and service lightdm restart. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lightdm 1.10.0-0ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Tue Apr 22 17:37:49 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2013-11-23 (150 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) ProcEnviron: TERM=linux PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: lightdm UpgradeStatus: Upgraded to trusty on 2014-04-19 (3 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1311403/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1311316] Re: After locking screen there is no input field to type password for unlock
Can you post your auth.log? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1311316 Title: After locking screen there is no input field to type password for unlock Status in Unity: Fix Committed Status in Unity 7.2 series: In Progress Status in “unity” package in Ubuntu: Fix Released Bug description: Sometimes (but not always) after locking the screen there is the situation not having any input field where I can type the password to unlock the session again. The shaded gray area simply does not have the input field. I can't do anything, I have to switch to text console and stop/start lightdm service to cure the problem loosing all of my session :( ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.2.0+14.04.20140416-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Tue Apr 22 22:17:57 2014 InstallationDate: Installed on 2012-03-03 (780 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) SourcePackage: unity UpgradeStatus: Upgraded to trusty on 2013-10-18 (186 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1311316/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1389781] Re: A2DP works randomly
Bryan Paradis : I'm sorry but using pulseaudio instead of the system configuration menu doesn't change anything for me (but I'm using KDE, so maybe there isn't the bug that affects Unity ?). But my problem is still here, even with Disable=Headset in my /etc/bluetooth/audio.conf sometimes I need a full reboot to make my bluetooth headset working (sudo services bluetooth restart isn't always enough). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1389781 Title: A2DP works randomly Status in “bluez” package in Ubuntu: Confirmed Status in “unity-control-center” package in Ubuntu: New Bug description: Hello, There is a problem with the bluetooth mode A2DP. When I connect my bluetooth headphone, sometimes I can activate the A2DP mode (which gives a good sound quality) and sometimes I can't (nothing happened when I change it in the configuration window), and I need to switch to HFS/HFP (bad sound quality). Note that some logs are attached. I found on the internet a work around which is to put in /etc/bluetooth/audio.conf a line Disable=Socket It seems to work (well it's hard to say for the moment because I didn't have the time to do much tests), but I would like to know what Socket is supposed to do. Would it be possible to solve this bug when Socket is activated too ? Thank you, Tobias. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1389781/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 87947] Re: xcb_xlib.c:50: xcb_xlib_unlock: Assertion `c->xlib.lock' failed.
** Changed in: sun-java6 (Ubuntu Hardy) Status: In Progress => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libx11 in Ubuntu. https://bugs.launchpad.net/bugs/87947 Title: xcb_xlib.c:50: xcb_xlib_unlock: Assertion `c->xlib.lock' failed. Status in “libx11” package in Ubuntu: Fix Released Status in “libxcb” package in Ubuntu: Fix Released Status in “sun-java6” package in Ubuntu: Fix Released Status in “libx11” source package in Hardy: Invalid Status in “libxcb” source package in Hardy: Invalid Status in “sun-java6” source package in Hardy: Won't Fix Status in “libx11” package in Debian: Fix Released Bug description: Hello, many things crash with following information[1] [1] xcb_xlib.c:50: xcb_xlib_unlock: Assertion `c->xlib.lock' failed. Step to reproduce: install fcitx, xterm, then run $ export XMODIFIERS="@im=fcitx" $ export GTK_IM_MODULE="xim" $ fcitx & $ xterm then press "Ctrl+Space" in the xterm window, then xterm crashed with the previous information. ii libxcb-xlib0 1.0-1.1 X C Binding, Xlib/XCB interface library ii libxcb-xlib0-dev 1.0-1.1 X C Binding, Xlib/XCB interface library, development files ii libxcb1 1.0-1.1 X C Binding ii libxcb1-dev 1.0-1.1 X C Binding, development files To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libx11/+bug/87947/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 948461] Re: apt-get hashsum/size mismatch because s3 mirrors don't support http pipelining correctly
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: cloud-init (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/948461 Title: apt-get hashsum/size mismatch because s3 mirrors don't support http pipelining correctly Status in “apt” package in Ubuntu: Confirmed Status in “cloud-init” package in Ubuntu: Fix Released Status in “apt” source package in Lucid: Won't Fix Status in “cloud-init” source package in Lucid: Fix Released Status in “apt” source package in Maverick: Won't Fix Status in “cloud-init” source package in Maverick: Fix Released Status in “apt” source package in Natty: Won't Fix Status in “cloud-init” source package in Natty: Fix Released Status in “apt” source package in Oneiric: Won't Fix Status in “cloud-init” source package in Oneiric: Fix Released Status in “apt” source package in Precise: Won't Fix Status in “cloud-init” source package in Precise: Fix Released Status in “apt” source package in Hardy: Won't Fix Status in “cloud-init” source package in Hardy: Won't Fix Bug description: [Problem] When using S3 mirrors, the apt client requests files A,B,C,D in the same request, but S3 responds with files B,C,D,A or some other arbitrary ordering. Apt then saves the files under the wrong file names. This is due to a bug in Amazon AWS S3, where http pipelining does not work in violation of RFC 2068. apt uses http pipelining currently, so this prevents apt from using mirrors hosted on S3 cloud instances. [Impact] Blocks use of S3 mirrors for providing ubuntu updates. Affects Hardy, Lucid, Maverick, Oneiric, Natty, and Precise. Use of S3 mirrors is considered as a way of enhancing our mirror services. Currently mirrors have moments of instability, so having the option of switching to S3 mirrors is very important for update reliability. [Development Fix] Fixed in Precise's cloud-init as of these comments, which adds an apt_pipelining option, turned off by default but configurable. http://bazaar.launchpad.net/~cloud-init-dev/cloud-init/trunk/revision/536 http://bazaar.launchpad.net/~cloud-init-dev/cloud-init/trunk/revision/537 [Stable Fix] TODO [Text Case] 1) Launch an instance in EC2 2) Run: sed -i "s,ec2.archive.ubuntu.com,ec2.archive.ubuntu.com.s3.amazonaws.com,g" /etc/apt/sources.list 3.) Set your apt debug levels to whatever you want 4) Run "apt-get -y update" 5) Run "apt-get -y install firefox xorg libreoffice > /tmp/install.log 2>&1" Broken Behavior: Cached files are being misnamed Fixed Behavior: Cached files are properly named The S3 EC2 mirrors seem to reproduce it most reliably. The downloaded files are whole and match the proper checksums, but they have the wrong content. [Regression Potential] http pipelining is an optimization technique in apt which allows multiple requests to be made at the same time. When it works, it provides a small performance boost, but when it doesn't the failures are arbitrary and not adequately explained. Thus, the expected regression is slightly slower apt behavior for non-S3 cloud users. However, testing shows the impact is less than a few seconds so will likely be unnoticed. In the off chance that it does inadvertently cause non-trivial performance impact, the change is configurable on a per-host instance. [Original Report] [SRU: Cloud-Init] r536 and r537 contains a fix that: 1.) Disables APT pipelining on first boot for new Cloud Images instances 2.) Disables APT pipelining on installation for existing cloud-images. The rational for this SRU is due to the Mirror situation for EC2 Cloud images. Currently, the mirrors are proving to have moments of instability that is causing both end-user and development pain. In order to address this, we built out Amazon AWS S3 mirrors. Unfortantly, due to a bug in S3, apt http pipeling does not work with S3. As a result, in order to provide enhanced availability for the Cloud Image repositories in EC2, apt http pipelining needs to be disabled ahead of flipping the new S3 mirrors as the active mirrors. The performance impact of this change is unnoticable and in testing, has proven to provide no ill effect. http pipeplining allows for multiple requests to be made at the same time. The apt change log states that http pipelining is a "micro-enhancement" and within the EC2 environment shaves a few seconds of many requests. When apt http pipeling works, at best, it saves a few seconds, when it fails against a buggy HTTP1.1 server or behind a proxy that does not support it, the failures are arbitrary and not adiquetly explained. This change will enhance the Cloud Images by making apt reques
[Touch-packages] [Bug 310915] Re: global name 'unknown' is not defined
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: lsb (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/310915 Title: global name 'unknown' is not defined Status in “lsb” package in Ubuntu: Fix Released Status in “lsb” source package in Hardy: Won't Fix Bug description: Binary package hint: lsb-release Ubuntu 8.04.1 lsb-release Version: 3.2-4ubuntu1 /usr/bin/lsb_release I think there is missing some quotation arround 'unkown' : version = RELEASE_CODENAME_LOOKUP.get(unknown, rinfo.get('suite','')) should be: version = RELEASE_CODENAME_LOOKUP.get('unknown', rinfo.get('suite','')) not sure - please check To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lsb/+bug/310915/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 373402] Re: libcurl3 depends on ca-certificates, but doesn't list it as a dependancy
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: curl (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to curl in Ubuntu. https://bugs.launchpad.net/bugs/373402 Title: libcurl3 depends on ca-certificates, but doesn't list it as a dependancy Status in “curl” package in Ubuntu: Fix Released Status in “curl” source package in Hardy: Won't Fix Bug description: This appears to have been fixed in 8.10 and newer, but since 8.0.4 is an LTS release, I'm posting this bug. The package libcurl3 should depend on ca-certificates being installed. However, the libcurl3 package in 8.0.4 doesn't list ca-certificates as a dependancy. It is listed as a dependancy in 8.10. Below is the output of 'aptitude show libcurl3' on Ubuntu 8.10: Package: libcurl3 State: installed Automatically installed: yes Version: 7.18.2-1ubuntu4.3 Priority: optional Section: libs Maintainer: Ubuntu Core Developers Uncompressed Size: 434k Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libidn11 (>= 0.5.18), libkrb53 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.1.4), ca-certificates Conflicts: libcurl4 Replaces: libcurl2 (< 1:7.11.2-2), libcurl4 Description: Multi-protocol file transfer library (OpenSSL) libcurl is designed to be a solid, usable, reliable and portable multi-protocol file transfer library. SSL support is provided by OpenSSL. This is the shared version of libcurl. Homepage: http://curl.haxx.se Here is the output of the same command on Ubuntu 8.0.4.2: Package: libcurl3 State: installed Automatically installed: no Version: 7.18.0-1ubuntu2.1 Priority: optional Section: libs Maintainer: Ubuntu Core Developers Uncompressed Size: 418k Depends: libc6 (>= 2.4), libcomerr2 (>= 1.33-3), libidn11 (>= 0.5.18), libkrb53 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libssl0.9.8 (>= 0.9.8f-1), zlib1g (>= 1:1.2.3.3.dfsg-1) Conflicts: libcurl4 Replaces: libcurl2 (< 1:7.11.2-2), libcurl4 Description: Multi-protocol file transfer library (OpenSSL) libcurl is designed to be a solid, usable, reliable and portable multi-protocol file transfer library. SSL support is provided by OpenSSL. This is the shared version of libcurl. Homepage: http://curl.haxx.se Notice the Depends line is missing ca-certificates in the 8.0.4.2 output. TEST CASE: 1) Install libcurl3 on Hardy - observe ca-certificates is not installed. 2) Install libcurl3 from Hardy proposed - observe ca-certificates is installed with it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/curl/+bug/373402/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 292971] Re: nscd leaking memory using libnss-ldap
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: eglibc (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to eglibc in Ubuntu. https://bugs.launchpad.net/bugs/292971 Title: nscd leaking memory using libnss-ldap Status in “eglibc” package in Ubuntu: Fix Released Status in “eglibc” source package in Lucid: Fix Released Status in “eglibc” source package in Hardy: Won't Fix Status in “eglibc” source package in Intrepid: Won't Fix Status in “eglibc” source package in Jaunty: Won't Fix Status in “eglibc” source package in Karmic: Won't Fix Bug description: We've got our ubuntu servers (8.04.1 LTS) authenticating users against an active directory libpam-krb5 and user account info is gotten via libnss-ldap and nscd. However, the nscd process keeps growing in memory image size until it fills the system memory completely. Memory leak speed seems to correlate to the number of queries against nss. The AD is Windows 2003 R2, using the R2 provided Identity management for UNIX (ex-SFU) to provide LDAP attributes. There are about 50 user objects and a dozen group objects matching the search filters specified in /etc/ldap.conf, plus the stuff that goes with AD by default. On our mail server, which uses nss queries the most and suffers worst from this problem, the memory usage gets up to 95MB (RES) and 203MB (VIRT) in 12 hours as observed by top, and exceeds one gigabyte in 3-5 days. I have tried turning paranoia mode on to restart the service periodically, but for some reason it does not restart, just quits the whole process (I don't know whether the paranoia mode is actually supposed to workin Ubuntu, as it is not mentioned in documentation provided with Ubuntu release, but it's parameters are in default config file, so I decided to try). Just tried to install a fresh Ubuntu 8.04.1 server where I installed only libnss-ldap, nscd and their requirements, configured it for AD connection and left idle for the night. nscd memory usage was up to 100MB in the morning when it initially (few minutes after restart) is about 3.5MB. *** Release and package info *** Description:Ubuntu 8.04.1 Release:8.04 nscd: Installed: 2.7-10ubuntu4 Candidate: 2.7-10ubuntu4 Version table: *** 2.7-10ubuntu4 0 500 http://fi.archive.ubuntu.com hardy-updates/universe Packages 100 /var/lib/dpkg/status 2.7-10ubuntu3 0 500 http://fi.archive.ubuntu.com hardy/universe Packages *** Sanitized /etc/ldap.conf *** base dc=our,dc=ad,dc=domain uri ldaps://dc1.our.ad.domain ldaps://dc2.our.ad.domain ldap_version 3 rootbinddn nsswi...@our.ad.DOMAIN scope sub pam_password crypt nss_base_passwd dc=our,dc=ad,dc=domain?sub?&(uidNumber=*) nss_base_group dc=our,dc=ad,dc=domain?sub?&(gidNumber=*) nss_map_objectclass posixAccount user nss_map_objectclass shadowAccount user nss_map_attribute uid sAMAccountName nss_map_attribute homeDirectory unixHomeDirectory nss_map_attribute shadowLastChange pwdLastSet nss_map_objectclass posixGroup group nss_map_attribute uniqueMember member pam_login_attribute sAMAccountName pam_filter objectclass=User nss_map_attribute userPassword unixUserPassword ssl on tls_checkpeer no sasl_secprops maxssf=0 nss_initgroups_ignoreusers backup,bin,daemon,dhcp,dovecot,ftp,games,gnats,irc,klog,libuuid,list,lp,mail,man,news,ntp,postfix,proftpd,proxy,root,snmp,sshd,sync,sys,syslog,uucp,www-data *** Password for nsswi...@our.ad.DOMAIN in /etc/ldap.secret *** *** Using default package provided /etc/nscd.conf *** To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/292971/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 297245] Re: [i965] Dell Studio 15 White Screen on X startup
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: xserver-xorg-video-intel (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/297245 Title: [i965] Dell Studio 15 White Screen on X startup Status in X.org xf86-video-intel: Invalid Status in “linux” package in Ubuntu: Invalid Status in “xorg” package in Ubuntu: Invalid Status in “xserver-xorg-video-intel” package in Ubuntu: Fix Released Status in “linux” source package in Hardy: Invalid Status in “xorg” source package in Hardy: Invalid Status in “xserver-xorg-video-intel” source package in Hardy: Won't Fix Status in “linux” source package in Intrepid: Invalid Status in “xorg” source package in Intrepid: Invalid Status in “xserver-xorg-video-intel” source package in Intrepid: Fix Released Bug description: [Problem] On X server load, displays white screen with scattered 1 pixel lines when using -intel driver. [Impact] Affects users owning hardware with certain LVDS displays produced by AUO, such as used in the Dell Studio 15 and Studio 1535; reportedly some Sony systems may be fixed by this as well. These are currently shipping models from Dell; they had been shipped with Ubuntu pre-installed, making this a particularly severe problem. [Development Branch] Same patch is deployed to Jaunty in version 2.5.1-1ubuntu9 This patch is a correction to a long standing bug where the -intel driver generates slightly incorrect modelines. Most systems tolerate the slight error, but others (like the ones affected by this bug) don't. [Patch] From upstream - https://bugs.freedesktop.org/show_bug.cgi?id=18342 Identical patch used in Intrepid and Jaunty [Test Case] Boot LiveCD on hardware with affected LVDS; will result in white screen following usplash. [Regression Potential] This changes the modeline calculations in general (i.e. it is not a hardware-specific quirk). Regression could occur under two theoretical circumstances: 1. Logic error. If the patch is mis-coded, it could cause all modelines to be miscalculated. This is not felt to be very likely, especially since the patch is very simple. However if it does happen, it will be exceedingly obvious... 2. Uncovering secondary bugs. It is entirely possible (but perhaps extraordinarily unlikely) that some hardware has slightly buggy timing dependencies the other way round, and are dependent on the buggy timing calculations, and could exhibit problems once the issue is fixed. However the risk of this is probably vanishingly small, and if it does happen will probably affect only a few systems, and the fix ought to be fairly straightforward. In both the above cases, ample testing will mitigate the risk levels. [lspci] 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Unknown device [1028:0254] [Original Report] I purchased a Dell Studio 15 with Ubuntu pre-installed. The graphics adapter is an Intel x3100 The LCD is 1280x800. I suspect that the LCD is not compatible with the current version of the Linux driver. Out of the box, the loading screens appear just fine. Once the X server loads, the screen goes mostly white, with some scattered lines, each about 1 pixel wide. I then booted to "recovery mode" and selected the option for the system to attempt to fix X on its own. This resulted in a "White Screen of Death" as well. Any attempt to use the Intel driver results in a White Screen of Death. Vesa will not recognize a 1280x800 resolution and only gives 800x600 upon initial installation. After installing KDE the screen results in 1024x768 but still will not work in 1280x800, even though those resolutions are listed in the Modelines in xorg.conf. Bug is present in Ubuntu 8.04 and 8.10, if not more. The worst part is that even the replacement Dell Studio 15 has this same problem. I suspect that Dell is knowingly selling a model of laptop that is supposedly "approved hardware" that they never got to work in the first place. To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/297245/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 330756] Re: [GM45] X freezes when playing ogg vorbis, ogg theora or mp3 in Totem
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: xserver-xorg-video-intel (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/330756 Title: [GM45] X freezes when playing ogg vorbis, ogg theora or mp3 in Totem Status in “xorg” package in Ubuntu: Invalid Status in “xserver-xorg-video-intel” package in Ubuntu: Fix Released Status in “xorg” source package in Hardy: Invalid Status in “xserver-xorg-video-intel” source package in Hardy: Won't Fix Bug description: Binary package hint: totem Totem hangs my system anytime I try to play media files. It is Totem 2.22.1 running on Hardy 8.04.2 on an IBM Thinkpad R400. I tried the example video "Experience ubuntu.ogg", the example audio "ubuntu Sax.ogg" and an MP3 file. I tried the MP3 file after installing the gstreamer plugins. I will be glad to provide more hardware details. I have tried it with and without desktop effects enabled. The screen resolution is 1280x800. When the system hangs, only the mouse moves. All other activity is frozen. I have to force a power off to recover. WORKAROUND: https://bugs.edge.launchpad.net/ubuntu/+bug/330756/comments/23 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/330756/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 372118] Re: CUPS does not work with Firefox, HTTPS bug (Hardy LTS)
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: cups (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/372118 Title: CUPS does not work with Firefox, HTTPS bug (Hardy LTS) Status in “cups” package in Ubuntu: Fix Released Status in “cups” source package in Hardy: Won't Fix Status in “cups” package in Debian: Fix Released Bug description: Binary package hint: cups CUPS forces the use of httpS connection to add a new printer. There is a bug in CUPS-1.3.7 with httpS connection when connecting interface with Firefox 3. The official CUPS bug report is here : http://www.cups.org/str.php?L2892 The bug is corrected in CUPS-1.3.9. This version is present on Ubuntu Jaunty. * Hardy/LTS will be supported for 5 years long. * It is impossible to add a printer with Firefox 3 on LTS (do not want to push users to use IE instead). Is it possible to backport CUPS from Jaunty to LTS (Hardy) ? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/372118/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 270831] Re: sky2 module missing in hardy initramfs netboot function
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: initramfs-tools (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/270831 Title: sky2 module missing in hardy initramfs netboot function Status in “initramfs-tools” package in Ubuntu: Fix Released Status in “initramfs-tools” source package in Hardy: Won't Fix Bug description: Description: Ubuntu 8.04.1 Release: 8.04 here is the post which describes the problem: http://ubuntuforums.org/showthread.php?p=5798505#post5798505 here is the solution i used: The good people at IRC #ltsp helped me solve the problem here's what I did to get PXE boot to work with the marvell/sky2 driver 1. sudo nano /opt/ltsp/i386/etc/initramfs-tools/modules and add "sky2" 2. sudo nano /opt/ltsp/i386/usr/share/initramfs-tools/hook-functions and add "sky2" at the end of this line: r8169 s2io sis900 skge slhc smc911x starfire sky2 \ 3. sudo chroot /opt/ltsp/i386 update-initramfs -u 4. sudo ltsp-update-kernels 5. and problem solved! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/270831/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 218899] Re: dapper upgrade to hardy: user openldap is not added to group sasl
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: openldap2.3 (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/218899 Title: dapper upgrade to hardy: user openldap is not added to group sasl Status in “openldap” package in Ubuntu: Won't Fix Status in “openldap2.3” package in Ubuntu: Invalid Status in “openldap” source package in Hardy: Invalid Status in “openldap2.3” source package in Hardy: Won't Fix Bug description: After upgrading from dapper to hardy, slapd can no longer authenticate against sasldb2. I found out that slapd now runs as a user "openldap", but this user has by default no rights to open /etc/sasldb2. The postinst script should do an "adduser openldap sasl". To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openldap/+bug/218899/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 123773] Re: 'SIOCSIFFLAGS: Cannot assign requested address' when setting up ip alias
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: wireless-tools (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ifupdown in Ubuntu. https://bugs.launchpad.net/bugs/123773 Title: 'SIOCSIFFLAGS: Cannot assign requested address' when setting up ip alias Status in “ifupdown” package in Ubuntu: Invalid Status in “wireless-tools” package in Ubuntu: Fix Released Status in “ifupdown” source package in Hardy: Invalid Status in “wireless-tools” source package in Hardy: Won't Fix Bug description: Binary package hint: ifupdown Add the following to /etc/network/interfaces on Feisty: auto eth0 iface eth0 inet static address 192.168.3.50 netmask 255.255.255.0 gateway 192.168.3.1 auto eth0:0 iface eth0:0 inet static address 192.168.3.51 netmask 255.255.255.0 Then do: $ sudo ifup eth0 (works fine) $ sudo ifup eth0:0 SIOCSIFFLAGS: Cannot assign requested address However, though ifup (and ifdown) will give that error, the interface comes up fine, and is pingable: $ ifconfig ... eth0:0Link encap:Ethernet HWaddr 00:04:5A:7D:4C:73 inet addr:192.168.3.51 Bcast:192.168.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:9 Base address:0xf800 ... $ ping -c 1 192.168.3.51 PING 192.168.3.51 (192.168.3.51) 56(84) bytes of data. 64 bytes from 192.168.3.51: icmp_seq=1 ttl=64 time=0.079 ms --- 192.168.3.51 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.079/0.079/0.079/0.000 ms This configuration works fine in Dapper. Also, using ifconfig on its own works too: $ sudo ifconfig eth0:0 192.168.3.51 up If nothing else, the message is confusing to the user (it was to me, since I thought something was wrong when it seems to work fine). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/123773/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 49240] Re: on_ac_power script returns 255 during boot
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: powermgmt-base (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to powermgmt-base in Ubuntu. https://bugs.launchpad.net/bugs/49240 Title: on_ac_power script returns 255 during boot Status in “powermgmt-base” package in Ubuntu: Triaged Status in “powermgmt-base” source package in Hardy: Won't Fix Bug description: Binary package hint: powermgmt-base Machine is a Dell Latittude X1 running Dapper with a stock 2.6.15-23-686 kernel. When booting on battery power, the on_ac_power script fails with an error code of 255. This has the result of allowing fsck's to occur during bootup on battey which is undesirable. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/powermgmt-base/+bug/49240/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 150187] Re: Evince has very bad quality when printing pdf files.
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: poppler (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to poppler in Ubuntu. https://bugs.launchpad.net/bugs/150187 Title: Evince has very bad quality when printing pdf files. Status in Poppler: Fix Released Status in “cupsys” package in Ubuntu: Invalid Status in “poppler” package in Ubuntu: Fix Released Status in “cupsys” source package in Hardy: Invalid Status in “poppler” source package in Hardy: Won't Fix Bug description: Evince prints every pdf I send, with very bad quality, and printing is very slow. Kpdf does not suffer of this problem, printing is high quality and fast. Looks like evince is rendering pdf to a very low quality image. I also tried printing some text from gedit, and it is of perfect quality too. To manage notifications about this bug go to: https://bugs.launchpad.net/poppler/+bug/150187/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 227744] Re: dapper upgrade to hardy: openldap silently refuses to start when unable to open SSL certificates - main: TLS init def ctx failed: -64 - openldap user not in ssl-cert
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: openldap2.3 (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openldap in Ubuntu. https://bugs.launchpad.net/bugs/227744 Title: dapper upgrade to hardy: openldap silently refuses to start when unable to open SSL certificates - main: TLS init def ctx failed: -64 - openldap user not in ssl-cert group Status in “openldap” package in Ubuntu: Won't Fix Status in “openldap2.3” package in Ubuntu: Invalid Status in “openldap” source package in Hardy: Invalid Status in “openldap2.3” source package in Hardy: Won't Fix Status in “openldap2.3” package in Debian: Confirmed Bug description: We ran a slapd on Dapper for a long time, and it relied on an SSL cert that we made root-owned 0400 for reasons of our own internal security. Apache happily opens these certs as root and passes the file descriptor along for after it drops privilege to the www-data user. The default install of slapd on Hardy silently refuses to start when we point it at these certificates. On Dapper, we ran slapd as root, and things worked reasonably well. The Hardy upgrade reconfigured slapd to run as the "openldap" user, which was unable to read the certificates we have. The problem with this is that there was no indication in the logs or the init script output that this was the reason it would not start. Forcing us to pore through the copious output of the debug mode is a little unreasonable for such a straightforward error condition. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openldap/+bug/227744/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 221673] Re: ALSA failing with PulseAudio in Hardy
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: alsa-lib (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/221673 Title: ALSA failing with PulseAudio in Hardy Status in “alsa-lib” package in Ubuntu: Fix Released Status in “alsa-plugins” package in Ubuntu: Fix Released Status in “pulseaudio” package in Ubuntu: Invalid Status in “alsa-lib” source package in Hardy: Won't Fix Status in “alsa-plugins” source package in Hardy: Won't Fix Status in “pulseaudio” source package in Hardy: Invalid Bug description: Binary package hint: pulseaudio I had been using PulseAudio in Gutsy for the past several months, so all the mundane stuff (groups, permissions, config files) is configured correctly. Since the upgrade to Hardy, ALSA is unable to use PulseAudio anymore. Details follow: - I am in the groups pulse-rt and pulse-access - ALSA without PulseAudio works just fine - PulseAudio seems to work fine with GStreamer Here's what my .asoundrc looks like: === pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse } ctl.!default { type pulse } === I'm attaching my default.pa with the bug. Here's the output of 'pulseaudio -vvv' when I try to run speaker-test (only relevant portion here, full output attached): I: client.c: Created 1 "Native client (UNIX socket client)" I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 I: protocol-native.c: Enabled SHM for new connection I: client.c: Client 1 changed name from "Native client (UNIX socket client)" to "ALSA plug-in [speaker-test]" I: client.c: Freed 1 "ALSA plug-in [speaker-test]" I: protocol-native.c: connection died. speaker-test fails with the following: WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 43 to 349525 Period size range from 21 to 87382 Using max buffer size 349524 Periods = 4 was set period_size = 87381 was set buffer_size = 349524 *** PULSEAUDIO: Unable to create stream. Unable to set hw params for playback: Input/output error Setting of hwparams failed: Input/output error speaker-test: pcm_pulse.c:115: pulse_stop: Assertion `pcm->stream' failed. Aborted TEST CASE: 1. Create an .asoundrc file in your home directory to direct alsa to use the pulseaudio plugin by default for all sound output. This is done with the command "asoundconf set-pulseaudio" 2. Attempt to run speaker-test with the following command: "speaker-test -twav -c2" 3. You should get the following error: *** PULSEAUDIO: Unable to create stream. speaker-test: pcm_pulse.c:115: pulse_stop: Assertion `pcm->stream' failed. speaker-test 1.0.15 Playback device is default Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 128 to 1048576 Period size range from 64 to 262144 Using max buffer size 1048576 Periods = 4 was set period_size = 262144 was set buffer_size = 1048576 Unable to set hw params for playback: Input/output error Setting of hwparams failed: Input/output error NOTE: This SRU is in two parts, one for alsa-lib, and the other for alsa-plugins. The new revision of alsa-plugins requires the new revision of alsa-lib in order to function properly. Intrepid status: This bug is fixed with alsa-lib 1.0.16 and alsa-plugins 1.0.16 which are both in intrepid. Regression potential: The diffs in comments 8 and 9 introduce fixes and in the case of alsa-lib, new symbols to be used by alsa-plugins to allow the pulse alsa-plugin to functino properly No other plugin's functionality should be affected with these changes. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/221673/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 221673] Re: ALSA failing with PulseAudio in Hardy
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: alsa-plugins (Ubuntu Hardy) Status: Triaged => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-lib in Ubuntu. https://bugs.launchpad.net/bugs/221673 Title: ALSA failing with PulseAudio in Hardy Status in “alsa-lib” package in Ubuntu: Fix Released Status in “alsa-plugins” package in Ubuntu: Fix Released Status in “pulseaudio” package in Ubuntu: Invalid Status in “alsa-lib” source package in Hardy: Won't Fix Status in “alsa-plugins” source package in Hardy: Won't Fix Status in “pulseaudio” source package in Hardy: Invalid Bug description: Binary package hint: pulseaudio I had been using PulseAudio in Gutsy for the past several months, so all the mundane stuff (groups, permissions, config files) is configured correctly. Since the upgrade to Hardy, ALSA is unable to use PulseAudio anymore. Details follow: - I am in the groups pulse-rt and pulse-access - ALSA without PulseAudio works just fine - PulseAudio seems to work fine with GStreamer Here's what my .asoundrc looks like: === pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse } ctl.!default { type pulse } === I'm attaching my default.pa with the bug. Here's the output of 'pulseaudio -vvv' when I try to run speaker-test (only relevant portion here, full output attached): I: client.c: Created 1 "Native client (UNIX socket client)" I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 I: protocol-native.c: Enabled SHM for new connection I: client.c: Client 1 changed name from "Native client (UNIX socket client)" to "ALSA plug-in [speaker-test]" I: client.c: Freed 1 "ALSA plug-in [speaker-test]" I: protocol-native.c: connection died. speaker-test fails with the following: WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 43 to 349525 Period size range from 21 to 87382 Using max buffer size 349524 Periods = 4 was set period_size = 87381 was set buffer_size = 349524 *** PULSEAUDIO: Unable to create stream. Unable to set hw params for playback: Input/output error Setting of hwparams failed: Input/output error speaker-test: pcm_pulse.c:115: pulse_stop: Assertion `pcm->stream' failed. Aborted TEST CASE: 1. Create an .asoundrc file in your home directory to direct alsa to use the pulseaudio plugin by default for all sound output. This is done with the command "asoundconf set-pulseaudio" 2. Attempt to run speaker-test with the following command: "speaker-test -twav -c2" 3. You should get the following error: *** PULSEAUDIO: Unable to create stream. speaker-test: pcm_pulse.c:115: pulse_stop: Assertion `pcm->stream' failed. speaker-test 1.0.15 Playback device is default Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 128 to 1048576 Period size range from 64 to 262144 Using max buffer size 1048576 Periods = 4 was set period_size = 262144 was set buffer_size = 1048576 Unable to set hw params for playback: Input/output error Setting of hwparams failed: Input/output error NOTE: This SRU is in two parts, one for alsa-lib, and the other for alsa-plugins. The new revision of alsa-plugins requires the new revision of alsa-lib in order to function properly. Intrepid status: This bug is fixed with alsa-lib 1.0.16 and alsa-plugins 1.0.16 which are both in intrepid. Regression potential: The diffs in comments 8 and 9 introduce fixes and in the case of alsa-lib, new symbols to be used by alsa-plugins to allow the pulse alsa-plugin to functino properly No other plugin's functionality should be affected with these changes. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/221673/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 347303] Re: ENV{TZ} and strftime in perl not working
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: perl (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to perl in Ubuntu. https://bugs.launchpad.net/bugs/347303 Title: ENV{TZ} and strftime in perl not working Status in “perl” package in Ubuntu: New Status in “perl” source package in Hardy: Won't Fix Status in “perl” package in Fedora: Fix Released Bug description: If you run the following: perl -e 'use POSIX; $ENV{TZ} = "UTC"; my $time = strftime("%Y-%m-%d %H:%M:%S %Z", localtime(time)); print "$time\n"; $ENV{TZ} = "US/Eastern"; my $time = strftime("%Y-%m-%d %H:%M:%S %Z", localtime(time)); print "$time\n";' You should get two different times. 2009-03-23 14:15:13 UTC 2009-03-23 10:15:13 EDT But in Ubuntu 8.04 server (lsb_release -rd =>Description: Ubuntu 8.04.2, Release: 8.04) you instead get 2009-03-23 14:15:40 UTC 2009-03-23 14:15:40 EDT It does the same thing for almost any timezone you give it. It give UTC time but labels it as the proper time zone. This happens on my 8.04 desktop version as well, but not on any 8.10 machines. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/perl/+bug/347303/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 387189] Re: logrotate incorrectly rotates /dev/null to /dev/null.1
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: logrotate (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to logrotate in Ubuntu. https://bugs.launchpad.net/bugs/387189 Title: logrotate incorrectly rotates /dev/null to /dev/null.1 Status in “apache2” package in Ubuntu: Invalid Status in “logrotate” package in Ubuntu: Fix Released Status in “apache2” source package in Lucid: Invalid Status in “logrotate” source package in Lucid: Fix Released Status in “apache2” source package in Hardy: Invalid Status in “logrotate” source package in Hardy: Won't Fix Status in “apache2” source package in Karmic: Invalid Status in “logrotate” source package in Karmic: Won't Fix Bug description: IMPACT: If logrotate is unable to find the logs it is expecting, it will incorrectly rotate /dev/null -> /dev/null. This can cause the session to become totally locked. Login is not possible (see bug #270781). ADDRESSED: A patch cherry picked from >Maverick packages resolves the config parsing when the wildcard produces an empty set (which defaulted to /dev/null). PATCH: See Merge proposal TEST CASE: Install apache2-commons (which includes a logrotate config), but have no apache running -> therefore no logs to rotate. Wait, or induce a log rotation and witness /dev/null be rotated to /dev/null.1. REGRESSION POTENTIAL: This should be considered low, the attached resolution has been in Debian since March 2010 and is in the Maverick release. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/387189/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 277069] Re: Slow performance with remote X applications (java, firefox/xul, etc.)
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: libxcb (Ubuntu Hardy) Status: In Progress => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libxcb in Ubuntu. https://bugs.launchpad.net/bugs/277069 Title: Slow performance with remote X applications (java, firefox/xul, etc.) Status in libxcb: Fix Released Status in “ia32-libs” package in Ubuntu: Fix Released Status in “libx11” package in Ubuntu: Invalid Status in “libxcb” package in Ubuntu: Fix Released Status in “ia32-libs” source package in Hardy: Won't Fix Status in “libx11” source package in Hardy: Invalid Status in “libxcb” source package in Hardy: Won't Fix Status in “ia32-libs” source package in Intrepid: Invalid Status in “libx11” source package in Intrepid: Invalid Status in “libxcb” source package in Intrepid: Invalid Status in “ia32-libs” source package in Jaunty: Won't Fix Status in “libx11” source package in Jaunty: Invalid Status in “libxcb” source package in Jaunty: Won't Fix Status in “ia32-libs” source package in Karmic: Fix Released Status in “libx11” source package in Karmic: Invalid Status in “libxcb” source package in Karmic: Fix Released Status in Debian GNU/Linux: Fix Released Status in “libx11” package in Fedora: Fix Released Status in Suse Linux: New Bug description: With xcb every write (in _XFlush) is followed by a read (_XEventsQueued) which is the cause of the very poor performance. The read usually returns EAGAIN because there is nothing to be read, but it is a severe performace hit anyhow. And why _XEvenetsQueued/read is being called when select/poll has previously returned indicating only a single file descriptor was ready is anybody's guess. [Original Report] I've submitted this bug as https://bugs.freedesktop.org/show_bug.cgi?id=17868 as well. Though the problem may not be in ia32-libs -package, it contains the /usr/lib32/libX11.so.6.2.0 library that appears to be somehow relevant to the problem at hand. Some Java applications, such as the trial version in http://www.typingmaster.com/, run unusably slow when used over a remote X connection. I'm using Ubuntu Hardy 8.04.1 with LTSP5, Linux kernel 2.6.24-19-server, with 32-bit firefox and 32-bit Java-plugin. The relevant package versions are here: firefox32 2.0.0.17 sun-java32 1.6.0.5 sun-java6-jre 6-06-0ubuntu1 ia32-libs 2.2ubuntu11 The issue does not appear to be Java-version related (it exists in 1.5 and 1.6 versions). I have not tested the very latest Java-versions though. The reason I'm reporting this as a possible XCB-related issue is that one can workaround the problem by using an X11-library that does not link to XCB. In current Ubuntu version (Hardy), /usr/lib32/libX11.so.6.2.0 library links to /usr/lib32/libxcb-xlib.so.0 and /usr/lib32/libxcb.so.1 libraries, XCB version is 1.1. In previous Ubuntu version (Gutsy) the X11-library does not do this. When the new library shared object replaced with the old one, the problem disappears, and Java applications that had problems run fine. There may be some other differences between the X11-libraries, but using XCB as an underlying implementation seems to be a major change, or is it? All other applications do not appear to have these problems, Java applications appear to be the sole source of these problems. I'm adding two attachments that show tshark-dump of network traffic in both cases, perhaps it helps to analyze the issue. What happens there is one keypress on typingmaster Java-version, on Hardy/XCB case it takes half a minute to process one keypress and switch a screen, on Gutsy/no-XCB case it takes maybe a second. Juha [lspci] 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo CLE266] [1106:3123] Subsystem: VIA Technologies, Inc. Unknown device [1106:] 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics [1106:3122] (rev 03) (prog-if 00 [VGA controller]) Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics [1106:3122] To manage notifications about this bug go to: https://bugs.launchpad.net/libxcb/+bug/277069/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 196429] Re: evince/evolution/gtk-print-dialog printing and system-config-printer fail when using client.conf with IP address for which there is no reverse look-up available
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: system-config-printer (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+2.0 in Ubuntu. https://bugs.launchpad.net/bugs/196429 Title: evince/evolution/gtk-print-dialog printing and system-config-printer fail when using client.conf with IP address for which there is no reverse look-up available Status in “gtk+2.0” package in Ubuntu: Fix Released Status in “system-config-printer” package in Ubuntu: Fix Released Status in “gtk+2.0” source package in Hardy: Won't Fix Status in “system-config-printer” source package in Hardy: Won't Fix Bug description: I ran into the 'greyed out print button' in evince in gutsy 7.10. I was working with a network printer and it worked via lpr and in fact any tool that did not rely on the GTK print dialog. Evince and evolution were clearly broken. As was the system printer configurator via the menu. It kept dying after reporting an error connecting to cups. I could use xpdf instead of evince and print fine. I could also use the GTK dialog to print to a file and then send the file to the printer using any non-GTK tool. In /etc/cups/client.conf I had put ServerName 192.168.1.16 In the end the problem was that I did not have an entry in /etc/hosts for 192.168.1.16. If I add an entry like 192.168.1.16 printer.mydomain.tld printer then everything works well including evince and evolution. Without that entry or a similar one in /etc/hosts, all the programs that use the GTK print dialog malfunction and the system print configurator dies. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/196429/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 156278] Re: Package description is only partially translated to spanish
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: apt (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/156278 Title: Package description is only partially translated to spanish Status in Package Descriptions for Ubuntu (to make translation easy): Fix Released Status in “apt” package in Ubuntu: Fix Released Status in “apt” source package in Hardy: Won't Fix Bug description: Many of the descriptions are untraslated in Gutsy, but they where translated in Feisty and they are in launchpad and where translated before the beta freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ddtp-ubuntu/+bug/156278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1385630] Re: systemd 215 hangs during boot
An update to this bug. I haven't seen the hang described here since I upgraded GDM to the version 3.14.0-0ubuntu1. It may or may not have anything to do with this. However, this bug report may now be closed. ** Changed in: systemd (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1385630 Title: systemd 215 hangs during boot Status in “systemd” package in Ubuntu: Invalid Bug description: I just installed (for testing) the newest systemd from Vivid proposed repositories. Yes, that is only a proposed package. The version is 215-5ubuntu1. Also the new plymouth was needed to do this (version 0.9.0-0ubuntu8). After the installation I found that every now and then booting or rebooting fails. It fails in a system-fsck line. So, nowhere to go from that, no tty's, no nothing. After each failure the next booting is successful, however. My setup is extremely fast, I am able to get to the desktop in about 5 seconds from grub menu. The setup contains Intel Core i7 4790 processor and Samsung 850 Pro SSD. This may also be some sort of race situation. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1385630/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 124706] Re: Cancel 'Wireles Key Required' dialog, can't connect on subsequent attempt
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: network-manager (Ubuntu Hardy) Status: In Progress => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/124706 Title: Cancel 'Wireles Key Required' dialog, can't connect on subsequent attempt Status in The acton project: Fix Released Status in NetworkManager: Expired Status in “network-manager” package in Ubuntu: Fix Released Status in “network-manager” source package in Hardy: Won't Fix Status in “network-manager” source package in Intrepid: Fix Released Bug description: Binary package hint: network-manager - Sometimes, NM tries to connect, but thinks association failed because of wrong credentials. - NM and asks for a password then. - I press 'Cancel' and try again. - Most of the cases, connection then works If this bug happens, I always have this snippet in the log: Jul 8 09:59:33 faui44a NetworkManager: nm_device_is_802_3_ethernet: assertion `dev != NULL' failed Jul 8 09:59:33 faui44a NetworkManager: nm_device_is_802_11_wireless: assertion `dev != NULL' failed Version information: ii network-manager 0.6.5-0ubuntu6 network management framework daemon To manage notifications about this bug go to: https://bugs.launchpad.net/acton/+bug/124706/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 283162] Re: gdmsetup crashed with SIGSEGV in g_file_load_partial_contents_finish()
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: glib2.0 (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/283162 Title: gdmsetup crashed with SIGSEGV in g_file_load_partial_contents_finish() Status in The "G" Library - GLib: Fix Released Status in “glib2.0” package in Ubuntu: Fix Released Status in “glib2.0” source package in Hardy: Won't Fix Bug description: Binary package hint: gdm Nautilus crashed on sturtup, after trying to send bugreport this new crash happened. ProblemType: Crash Architecture: amd64 CrashCounter: 1 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/sbin/gdmsetup NonfreeKernelModules: nvidia Package: gdm 2.20.7-0ubuntu1.1 ProcAttrCurrent: unconfined ProcCmdline: gdmsetup ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin LANG=hu_HU.UTF-8 SHELL=/bin/bash Signal: 11 SourcePackage: gdm StacktraceTop: g_file_load_partial_contents_finish () ?? () ?? () from /usr/lib/libgio-2.0.so.0 ?? () from /usr/lib/libgio-2.0.so.0 g_main_context_dispatch () Title: gdmsetup crashed with SIGSEGV in g_file_load_partial_contents_finish() Uname: Linux 2.6.24-21-generic x86_64 UserGroups: sambashare vboxusers To manage notifications about this bug go to: https://bugs.launchpad.net/glib/+bug/283162/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 156085] Re: Could not open /proc/bus/usb/devices
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: qemu (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sysvinit in Ubuntu. https://bugs.launchpad.net/bugs/156085 Title: Could not open /proc/bus/usb/devices Status in QEMU: Fix Released Status in Virtualbox: Fix Released Status in “apcupsd” package in Ubuntu: Invalid Status in “fxload” package in Ubuntu: Fix Released Status in “kvm” package in Ubuntu: Fix Released Status in “madfuload” package in Ubuntu: Fix Released Status in “midisport-firmware” package in Ubuntu: Fix Released Status in “qemu” package in Ubuntu: Fix Released Status in “sysvinit” package in Ubuntu: Won't Fix Status in “usbview” package in Ubuntu: Triaged Status in “vmware-server” package in Ubuntu: Invalid Status in “apcupsd” source package in Gutsy: Invalid Status in “fxload” source package in Gutsy: Won't Fix Status in “kvm” source package in Gutsy: Won't Fix Status in “madfuload” source package in Gutsy: Won't Fix Status in “midisport-firmware” source package in Gutsy: Won't Fix Status in “qemu” source package in Gutsy: Won't Fix Status in “sysvinit” source package in Gutsy: Invalid Status in “usbview” source package in Gutsy: Won't Fix Status in “vmware-server” source package in Gutsy: Won't Fix Status in “apcupsd” source package in Hardy: Invalid Status in “fxload” source package in Hardy: Won't Fix Status in “kvm” source package in Hardy: Won't Fix Status in “madfuload” source package in Hardy: Won't Fix Status in “midisport-firmware” source package in Hardy: Won't Fix Status in “qemu” source package in Hardy: Won't Fix Status in “sysvinit” source package in Hardy: Won't Fix Status in “usbview” source package in Hardy: Won't Fix Status in “vmware-server” source package in Hardy: Won't Fix Status in “apcupsd” source package in Jaunty: Invalid Status in “fxload” source package in Jaunty: Fix Released Status in “kvm” source package in Jaunty: Fix Released Status in “madfuload” source package in Jaunty: Fix Released Status in “midisport-firmware” source package in Jaunty: Fix Released Status in “qemu” source package in Jaunty: Fix Released Status in “sysvinit” source package in Jaunty: Won't Fix Status in “usbview” source package in Jaunty: Won't Fix Status in “vmware-server” source package in Jaunty: Invalid Status in “usbview” package in Debian: Fix Released Status in “qemu” package in openSUSE: Fix Released Bug description: On Gutsy 64-bit using qemu/kvm (also VirtualBox and, I believe, VMWare) and the "-usb" switch no USB devices are available since qemu/kvm looks for the description of them in the 'devices' file of a usbfs mount at /proc/bus/usb/ but the code previously providing the usbfs mount that is created at start-up via /etc/rcS/S11mountdevsubfs.sh --> /etc/init.d/mountdevsubfs.sh was commented out. The USB devices are now reported at /dev/bus/usb/ but currently there is no usbfs file-system mounted/linked there to provide the 'devices' text-file. qemu/kvm reports: qemuctl -qemu vdeq kvm -boot c -m 512 -hda /home/all/VirtualMachines /WindowsXP-SP2.ovl -net nic,vlan=0 -soundhw es1370 -usb -net vde info usbhost Could not open /proc/bus/usb/devices $ ls -l /proc/bus/usb total 0 WORKAROUND: To re-enable it edit the file '/etc/init.d/mountdevsubfs.sh' and uncomment the code after line 40 so it reads: # Magic to make /proc/bus/usb work # mkdir -p /dev/bus/usb/.usbfs domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 ln -s .usbfs/devices /dev/bus/usb/devices mount --rbind /dev/bus/usb /proc/bus/usb Execute the script manually to enable the change before a system reboot: $ sudo /etc/init.d/mountdevsubfs.sh start To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/156085/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 160238] Re: Corrupted AppArmor audit log messages
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: apparmor (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/160238 Title: Corrupted AppArmor audit log messages Status in “apparmor” package in Ubuntu: Invalid Status in “apparmor” source package in Gutsy: Won't Fix Status in “apparmor” source package in Hardy: Won't Fix Status in “apparmor” source package in Intrepid: Fix Released Status in “apparmor” source package in Jaunty: Fix Released Status in “apparmor” source package in Karmic: Invalid Bug description: Binary package hint: apparmor AppArmor is writing corrupted audit messages to /var/log/messages, which crashes the aa-logprof tool. The attached file contains the console output of a aa-genprof run and the corrupted messages selected by visual inspection of /var/log/messages. After copying /var/log/messages, and deleting the messages listed in the attachment, aa-logprof was successfully executed using the clean log file. My system is a fresh install of Ubuntu 7.10. My sources.list only contains the Ubuntu, Medibuntu and Canonical repositories, and all software was installed from them, with the sole exception of TrueCrypt, which was installed from the Gutsy .deb file available at www.truecrypt.org. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/160238/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 156085] Re: Could not open /proc/bus/usb/devices
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: kvm (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sysvinit in Ubuntu. https://bugs.launchpad.net/bugs/156085 Title: Could not open /proc/bus/usb/devices Status in QEMU: Fix Released Status in Virtualbox: Fix Released Status in “apcupsd” package in Ubuntu: Invalid Status in “fxload” package in Ubuntu: Fix Released Status in “kvm” package in Ubuntu: Fix Released Status in “madfuload” package in Ubuntu: Fix Released Status in “midisport-firmware” package in Ubuntu: Fix Released Status in “qemu” package in Ubuntu: Fix Released Status in “sysvinit” package in Ubuntu: Won't Fix Status in “usbview” package in Ubuntu: Triaged Status in “vmware-server” package in Ubuntu: Invalid Status in “apcupsd” source package in Gutsy: Invalid Status in “fxload” source package in Gutsy: Won't Fix Status in “kvm” source package in Gutsy: Won't Fix Status in “madfuload” source package in Gutsy: Won't Fix Status in “midisport-firmware” source package in Gutsy: Won't Fix Status in “qemu” source package in Gutsy: Won't Fix Status in “sysvinit” source package in Gutsy: Invalid Status in “usbview” source package in Gutsy: Won't Fix Status in “vmware-server” source package in Gutsy: Won't Fix Status in “apcupsd” source package in Hardy: Invalid Status in “fxload” source package in Hardy: Won't Fix Status in “kvm” source package in Hardy: Won't Fix Status in “madfuload” source package in Hardy: Won't Fix Status in “midisport-firmware” source package in Hardy: Won't Fix Status in “qemu” source package in Hardy: Won't Fix Status in “sysvinit” source package in Hardy: Won't Fix Status in “usbview” source package in Hardy: Won't Fix Status in “vmware-server” source package in Hardy: Won't Fix Status in “apcupsd” source package in Jaunty: Invalid Status in “fxload” source package in Jaunty: Fix Released Status in “kvm” source package in Jaunty: Fix Released Status in “madfuload” source package in Jaunty: Fix Released Status in “midisport-firmware” source package in Jaunty: Fix Released Status in “qemu” source package in Jaunty: Fix Released Status in “sysvinit” source package in Jaunty: Won't Fix Status in “usbview” source package in Jaunty: Won't Fix Status in “vmware-server” source package in Jaunty: Invalid Status in “usbview” package in Debian: Fix Released Status in “qemu” package in openSUSE: Fix Released Bug description: On Gutsy 64-bit using qemu/kvm (also VirtualBox and, I believe, VMWare) and the "-usb" switch no USB devices are available since qemu/kvm looks for the description of them in the 'devices' file of a usbfs mount at /proc/bus/usb/ but the code previously providing the usbfs mount that is created at start-up via /etc/rcS/S11mountdevsubfs.sh --> /etc/init.d/mountdevsubfs.sh was commented out. The USB devices are now reported at /dev/bus/usb/ but currently there is no usbfs file-system mounted/linked there to provide the 'devices' text-file. qemu/kvm reports: qemuctl -qemu vdeq kvm -boot c -m 512 -hda /home/all/VirtualMachines /WindowsXP-SP2.ovl -net nic,vlan=0 -soundhw es1370 -usb -net vde info usbhost Could not open /proc/bus/usb/devices $ ls -l /proc/bus/usb total 0 WORKAROUND: To re-enable it edit the file '/etc/init.d/mountdevsubfs.sh' and uncomment the code after line 40 so it reads: # Magic to make /proc/bus/usb work # mkdir -p /dev/bus/usb/.usbfs domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 ln -s .usbfs/devices /dev/bus/usb/devices mount --rbind /dev/bus/usb /proc/bus/usb Execute the script manually to enable the change before a system reboot: $ sudo /etc/init.d/mountdevsubfs.sh start To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/156085/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 156085] Re: Could not open /proc/bus/usb/devices
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: usbview (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to sysvinit in Ubuntu. https://bugs.launchpad.net/bugs/156085 Title: Could not open /proc/bus/usb/devices Status in QEMU: Fix Released Status in Virtualbox: Fix Released Status in “apcupsd” package in Ubuntu: Invalid Status in “fxload” package in Ubuntu: Fix Released Status in “kvm” package in Ubuntu: Fix Released Status in “madfuload” package in Ubuntu: Fix Released Status in “midisport-firmware” package in Ubuntu: Fix Released Status in “qemu” package in Ubuntu: Fix Released Status in “sysvinit” package in Ubuntu: Won't Fix Status in “usbview” package in Ubuntu: Triaged Status in “vmware-server” package in Ubuntu: Invalid Status in “apcupsd” source package in Gutsy: Invalid Status in “fxload” source package in Gutsy: Won't Fix Status in “kvm” source package in Gutsy: Won't Fix Status in “madfuload” source package in Gutsy: Won't Fix Status in “midisport-firmware” source package in Gutsy: Won't Fix Status in “qemu” source package in Gutsy: Won't Fix Status in “sysvinit” source package in Gutsy: Invalid Status in “usbview” source package in Gutsy: Won't Fix Status in “vmware-server” source package in Gutsy: Won't Fix Status in “apcupsd” source package in Hardy: Invalid Status in “fxload” source package in Hardy: Won't Fix Status in “kvm” source package in Hardy: Won't Fix Status in “madfuload” source package in Hardy: Won't Fix Status in “midisport-firmware” source package in Hardy: Won't Fix Status in “qemu” source package in Hardy: Won't Fix Status in “sysvinit” source package in Hardy: Won't Fix Status in “usbview” source package in Hardy: Won't Fix Status in “vmware-server” source package in Hardy: Won't Fix Status in “apcupsd” source package in Jaunty: Invalid Status in “fxload” source package in Jaunty: Fix Released Status in “kvm” source package in Jaunty: Fix Released Status in “madfuload” source package in Jaunty: Fix Released Status in “midisport-firmware” source package in Jaunty: Fix Released Status in “qemu” source package in Jaunty: Fix Released Status in “sysvinit” source package in Jaunty: Won't Fix Status in “usbview” source package in Jaunty: Won't Fix Status in “vmware-server” source package in Jaunty: Invalid Status in “usbview” package in Debian: Fix Released Status in “qemu” package in openSUSE: Fix Released Bug description: On Gutsy 64-bit using qemu/kvm (also VirtualBox and, I believe, VMWare) and the "-usb" switch no USB devices are available since qemu/kvm looks for the description of them in the 'devices' file of a usbfs mount at /proc/bus/usb/ but the code previously providing the usbfs mount that is created at start-up via /etc/rcS/S11mountdevsubfs.sh --> /etc/init.d/mountdevsubfs.sh was commented out. The USB devices are now reported at /dev/bus/usb/ but currently there is no usbfs file-system mounted/linked there to provide the 'devices' text-file. qemu/kvm reports: qemuctl -qemu vdeq kvm -boot c -m 512 -hda /home/all/VirtualMachines /WindowsXP-SP2.ovl -net nic,vlan=0 -soundhw es1370 -usb -net vde info usbhost Could not open /proc/bus/usb/devices $ ls -l /proc/bus/usb total 0 WORKAROUND: To re-enable it edit the file '/etc/init.d/mountdevsubfs.sh' and uncomment the code after line 40 so it reads: # Magic to make /proc/bus/usb work # mkdir -p /dev/bus/usb/.usbfs domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 ln -s .usbfs/devices /dev/bus/usb/devices mount --rbind /dev/bus/usb /proc/bus/usb Execute the script manually to enable the change before a system reboot: $ sudo /etc/init.d/mountdevsubfs.sh start To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/156085/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1394919] Re: constant crash in trying to collect info for recoverable error
i had it several times today that: a) apps do not start anymore b) suspended apps do not recover anymore c) only a system reboot helps to get out of this state i collected a bunch of logs at http://paste.ubuntu.com/9197719/ while the system is in this state obviously cgmanager hangs and does not react anymore to any interaction here ... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1394919 Title: constant crash in trying to collect info for recoverable error Status in “apport” package in Ubuntu: New Status in “cgmanager” package in Ubuntu: New Status in “ubuntu-app-launch” package in Ubuntu: Fix Released Status in “apport” package in Ubuntu RTM: New Status in “cgmanager” package in Ubuntu RTM: Confirmed Bug description: Errors Bucket - https://errors.ubuntu.com/problem/9a1df90760a88c9b4e5e7e3b4ef450f6b5669c7c since a few days my phone started producing a /var/crash/_usr_share_apport_recoverable_problem.32011.crash i see the timestamp updated multiple times and the matching PID from the traceback seems to be cgmanager https://errors.ubuntu.com/oops/c25e8678-70f2-11e4-976f-fa163e4aaad4 https://errors.ubuntu.com/oops/94398858-70a0-11e4-906f-fa163e339c81 https://errors.ubuntu.com/oops/235b2dd0-7118-11e4-837c-fa163e5bb1a2 are the respective whoopsie uploads. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1394919/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1394919] Re: constant crash in trying to collect info for recoverable error
i also just noticed that my dbus log is full of: ** (zeitgeist-fts:2999): WARNING **: Unable to get info on application://ubuntu-app-launch.desktop (process:2082): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.41.5/./gobject/gsignal.c:3101: signal id '33' is invalid for instance '0x1829ad8' (process:2082): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.41.5/./gobject/gsignal.c:3101: signal id '33' is invalid for instance '0x1829ad8' ** Summary changed: - constant crash in trying to collect info for recoverable error + constant crash in trying to collect info for recoverable error of cgmanager -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1394919 Title: constant crash in trying to collect info for recoverable error of cgmanager Status in “apport” package in Ubuntu: New Status in “cgmanager” package in Ubuntu: New Status in “ubuntu-app-launch” package in Ubuntu: Fix Released Status in “apport” package in Ubuntu RTM: New Status in “cgmanager” package in Ubuntu RTM: Confirmed Bug description: Errors Bucket - https://errors.ubuntu.com/problem/9a1df90760a88c9b4e5e7e3b4ef450f6b5669c7c since a few days my phone started producing a /var/crash/_usr_share_apport_recoverable_problem.32011.crash i see the timestamp updated multiple times and the matching PID from the traceback seems to be cgmanager https://errors.ubuntu.com/oops/c25e8678-70f2-11e4-976f-fa163e4aaad4 https://errors.ubuntu.com/oops/94398858-70a0-11e4-906f-fa163e339c81 https://errors.ubuntu.com/oops/235b2dd0-7118-11e4-837c-fa163e5bb1a2 are the respective whoopsie uploads. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1394919/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 238755] Re: 'Account has expired' message when adding a new user, after "passwd -l root"
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: landscape-client (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to shadow in Ubuntu. https://bugs.launchpad.net/bugs/238755 Title: 'Account has expired' message when adding a new user, after "passwd -l root" Status in “landscape-client” package in Ubuntu: Fix Released Status in “shadow” package in Ubuntu: Fix Released Status in “landscape-client” source package in Hardy: Won't Fix Status in “shadow” source package in Hardy: Won't Fix Status in “landscape-client” source package in Intrepid: Invalid Status in “shadow” source package in Intrepid: Fix Released Status in “shadow” package in Debian: Fix Released Bug description: Binary package hint: adduser I've repeatedly added new users, but receive a seemingly spurious error: rich@aias:~$ sudo adduser james Adding user `james' ... Adding new group `james' (1004) ... Adding new user `james' (1004) with group `james' ... Creating home directory `/home/james' ... Copying files from `/etc/skel' ... Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully Your account has expired; please contact your system administrator chfn: PAM authentication failed adduser: `/usr/bin/chfn james' returned error code 1. Exiting. However, the user can log in. rich@aias:~$ finger james Login: james Name: Directory: /home/jamesShell: /bin/bash On since Mon Jun 9 21:19 (PDT) on tty1 4 minutes 57 seconds idle (messages off) No mail. No Plan. adduser version: 3.105ubuntu1 ubuntu version: 8.04 , fully updated I've marked this as a security issue, since pam is part of the error message. Update: This seems to be related to the use of "passwd -l root". Until the Debian fix shows up in hardy, here is a workaround, thanks to Nicolas François: sudo passwd --unlock root sudo usermod --lock root To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/landscape-client/+bug/238755/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 196724] Re: console-kit-daemon crashed with SIGSEGV in vt_thread_start()
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: consolekit (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to consolekit in Ubuntu. https://bugs.launchpad.net/bugs/196724 Title: console-kit-daemon crashed with SIGSEGV in vt_thread_start() Status in “consolekit” package in Ubuntu: Fix Released Status in “consolekit” source package in Hardy: Won't Fix Status in “consolekit” package in Fedora: Won't Fix Bug description: Binary package hint: consolekit Reboot with Hardy updates on 29th Feb. ProblemType: Crash Architecture: i386 CrashCounter: 1 Date: Fri Feb 29 01:38:08 2008 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/sbin/console-kit-daemon NonfreeKernelModules: cdrom Package: consolekit 0.2.3-3ubuntu3 PackageArchitecture: i386 ProcCmdline: /usr/sbin/console-kit-daemon ProcEnviron: Signal: 11 SourcePackage: consolekit StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: console-kit-daemon crashed with SIGSEGV Uname: Linux 2.6.24-10-generic i686 UserGroups: SegvAnalysis: Segfault happened at: 0xb7dbc44e:call *0xc(%edx) PC (0xb7dbc44e) ok source "*0xc(%edx)" (0xc35d0851) not located in a known VMA region (needed readable region)! SegvReason: reading unknown VMA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/consolekit/+bug/196724/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 162441] Re: ListUpdate reports a cancelled download as a failed one
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: apt (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/162441 Title: ListUpdate reports a cancelled download as a failed one Status in “apt” package in Ubuntu: Confirmed Status in “aptdaemon” package in Ubuntu: Fix Released Status in “apt” source package in Hardy: Won't Fix Status in “aptdaemon” source package in Hardy: Won't Fix Bug description: Binary package hint: update-manager If a download is cancelt in the release-upgrader it should *not* display a failed to download dialog, but just exit. If a download of a prerequist is cancled it should stop instead of restarting without prerequists. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/162441/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 269651] Re: console-kit-daemon crashed with SIGSEGV in g_str_hash()
Hardy has seen the end of its life and is no longer receiving any updates. Marking the Hardy task for this ticket as "Won't Fix". ** Changed in: consolekit (Ubuntu Hardy) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to consolekit in Ubuntu. https://bugs.launchpad.net/bugs/269651 Title: console-kit-daemon crashed with SIGSEGV in g_str_hash() Status in ConsoleKit: Fix Released Status in “consolekit” package in Ubuntu: Fix Released Status in “consolekit” source package in Hardy: Won't Fix Status in “consolekit” source package in Intrepid: Fix Released Bug description: Binary package hint: consolekit i'm playing music with rhythymbox.. and the console- kit is falling down ProblemType: Crash Architecture: i386 CrashCounter: 1 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/sbin/console-kit-daemon NonfreeKernelModules: ath_hal Package: consolekit 0.2.10-1ubuntu4 ProcAttrCurrent: unconfined ProcCmdline: /usr/sbin/console-kit-daemon ProcEnviron: Signal: 11 SourcePackage: consolekit StacktraceTop: g_str_hash () from /usr/lib/libglib-2.0.so.0 ?? () from /usr/lib/libglib-2.0.so.0 ?? () ?? () ?? () Title: console-kit-daemon crashed with SIGSEGV in g_str_hash() Uname: Linux 2.6.27-2-generic i686 UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/consolekit/+bug/269651/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1385457] Re: "Show desktop" shows remains of previous windows not wallpaper
Appeared in other environments. I have wrapped it in and reinstalled 14.04LTS. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1385457 Title: "Show desktop" shows remains of previous windows not wallpaper Status in “unity” package in Ubuntu: Confirmed Bug description: Using show desktop should clear all windows away to show clear wallpaper. Instead the ghost images of all previously opened windows are visible. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic i686 .tmp.unity.support.test.0: ApportVersion: 2.14.7-0ubuntu8 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Oct 24 20:03:43 2014 DistUpgraded: 2014-10-24 03:32:04,259 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device [3842:1313] InstallationDate: Installed on 2014-02-15 (251 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release i386 (20131016.1) MachineType: OEM OEM ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-19-generic root=UUID=91d715ab-45f8-48ce-a982-2f738becd68a ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to utopic on 2014-10-24 (0 days ago) dmi.bios.date: 05/05/2009 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: 6.00 PG dmi.board.name: G31MX Series dmi.board.vendor: Foxconn dmi.chassis.type: 3 dmi.chassis.vendor: OEM dmi.chassis.version: OEM dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd05/05/2009:svnOEM:pnOEM:pvrOEM:rvnFoxconn:rnG31MXSeries:rvr:cvnOEM:ct3:cvrOEM: dmi.product.name: OEM dmi.product.version: OEM dmi.sys.vendor: OEM version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Fri Oct 24 08:28:56 2014 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputHID 1241:1166MOUSE, id 8 inputgspca_sn9c20xKEYBOARD, id 9 inputAT Translated Set 2 keyboard KEYBOARD, id 10 xserver.errors: Failed to load module "nvidia" (module does not exist, 0) Failed to load module "nvidia" (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.16.0-1ubuntu1 xserver.video_driver: nouveau To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1385457/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395494] [NEW] package isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
Public bug reported: I am unaware of the problem. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic-pae 3.2.14 Uname: Linux 3.2.0-23-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.8 AptOrdering: linux-generic-pae: Remove linux-image-generic-pae: Remove linux-image-3.2.0-70-generic-pae: Remove isc-dhcp-server: Configure dhcp3-server: Configure Architecture: i386 Date: Sun Nov 23 22:45:07 2014 DhServerLeases: DuplicateSignature: package:isc-dhcp-server:4.1.ESV-R4-0ubuntu5.9:subprocess installed post-installation script returned error exit status 127 ErrorMessage: subprocess installed post-installation script returned error exit status 127 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423) MarkForUpload: True ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic-pae root=UUID=6da5ec4a-7f2b-4e3c-b7ee-f3fcabc0e5d7 ro quiet splash vt.handoff=7 SourcePackage: isc-dhcp Title: package isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 UpgradeStatus: Upgraded to precise on 2014-11-23 (0 days ago) mtime.conffile..etc.dhcp.dhcpd.conf: 2013-07-12T19:38:18.017121 ** Affects: isc-dhcp (Ubuntu) Importance: Undecided Status: New ** Tags: apparmor apport-package i386 precise -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu. https://bugs.launchpad.net/bugs/1395494 Title: package isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 Status in “isc-dhcp” package in Ubuntu: New Bug description: I am unaware of the problem. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic-pae 3.2.14 Uname: Linux 3.2.0-23-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.8 AptOrdering: linux-generic-pae: Remove linux-image-generic-pae: Remove linux-image-3.2.0-70-generic-pae: Remove isc-dhcp-server: Configure dhcp3-server: Configure Architecture: i386 Date: Sun Nov 23 22:45:07 2014 DhServerLeases: DuplicateSignature: package:isc-dhcp-server:4.1.ESV-R4-0ubuntu5.9:subprocess installed post-installation script returned error exit status 127 ErrorMessage: subprocess installed post-installation script returned error exit status 127 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423) MarkForUpload: True ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic-pae root=UUID=6da5ec4a-7f2b-4e3c-b7ee-f3fcabc0e5d7 ro quiet splash vt.handoff=7 SourcePackage: isc-dhcp Title: package isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 UpgradeStatus: Upgraded to precise on 2014-11-23 (0 days ago) mtime.conffile..etc.dhcp.dhcpd.conf: 2013-07-12T19:38:18.017121 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1395494/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395494] Re: package isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu. https://bugs.launchpad.net/bugs/1395494 Title: package isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 Status in “isc-dhcp” package in Ubuntu: New Bug description: I am unaware of the problem. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic-pae 3.2.14 Uname: Linux 3.2.0-23-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.8 AptOrdering: linux-generic-pae: Remove linux-image-generic-pae: Remove linux-image-3.2.0-70-generic-pae: Remove isc-dhcp-server: Configure dhcp3-server: Configure Architecture: i386 Date: Sun Nov 23 22:45:07 2014 DhServerLeases: DuplicateSignature: package:isc-dhcp-server:4.1.ESV-R4-0ubuntu5.9:subprocess installed post-installation script returned error exit status 127 ErrorMessage: subprocess installed post-installation script returned error exit status 127 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423) MarkForUpload: True ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic-pae root=UUID=6da5ec4a-7f2b-4e3c-b7ee-f3fcabc0e5d7 ro quiet splash vt.handoff=7 SourcePackage: isc-dhcp Title: package isc-dhcp-server 4.1.ESV-R4-0ubuntu5.9 failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 UpgradeStatus: Upgraded to precise on 2014-11-23 (0 days ago) mtime.conffile..etc.dhcp.dhcpd.conf: 2013-07-12T19:38:18.017121 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1395494/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1370175] Re: Libav security fixes Sept 2014
** Tags added: trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libav in Ubuntu. https://bugs.launchpad.net/bugs/1370175 Title: Libav security fixes Sept 2014 Status in “libav” package in Ubuntu: Confirmed Status in “libav” source package in Precise: Fix Released Status in “libav” source package in Trusty: Confirmed Status in “libav” source package in Utopic: Confirmed Bug description: Libav 9.17 and 0.8.16 are out, and fix "a number of critical functional and security issues (many of which have CVE identifiers assigned)" http://www.libav.org/news.html To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libav/+bug/1370175/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1393281] Re: Print settings window reports "Print service is unavailable - Bad file descriptor" until cups is restarted
When bug is present, cups is running: $ sudo service cups status cups start/running Attaching /var/log/boot.log ** Attachment added: "boot.log" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1393281/+attachment/4266232/+files/boot.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1393281 Title: Print settings window reports "Print service is unavailable - Bad file descriptor" until cups is restarted Status in “cups” package in Ubuntu: Incomplete Bug description: In the KDE Print Settings window, there are no settings (as expected) but a message reading "Print service is unavailable - Bad file descriptor": http://wstaw.org/m/2014/11/17/plasma-desktopKB2526.png When I restart the cups service, all is well and I can see print settings. Kubuntu 14.10 $ apt-cache policy cups cups: Installed: 1.7.5-3ubuntu2 Candidate: 1.7.5-3ubuntu2 Version table: *** 1.7.5-3ubuntu2 0 500 http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive/ utopic/main amd64 Packages 100 /var/lib/dpkg/status --- ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 14.10 InstallationDate: Installed on 2014-04-18 (216 days ago) InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.1) Lpstat: device for Dell-C1760nw: dnssd://Dell%20C1760nw%20Color%20Printer%20(B7%3A5F%3A1D)._pdl-datastream._tcp.local/ MachineType: To be filled by O.E.M. To be filled by O.E.M. NonfreeKernelModules: fglrx Package: cups 1.7.5-3ubuntu2 PackageArchitecture: amd64 Papersize: letter PpdFiles: Dell-C1760nw: Xerox Phaser 6000B v1.0 ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=b4a856d9-5d57-455a-b81d-6f21fc094155 ro quiet splash vt.handoff=7 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=b4a856d9-5d57-455a-b81d-6f21fc094155 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Tags: utopic Uname: Linux 3.16.0-24-generic x86_64 UpgradeStatus: Upgraded to utopic on 2014-10-26 (24 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers _MarkForUpload: True dmi.bios.date: 12/10/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2201 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: M5A97 R2.0 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2201:bd12/10/2013:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKCOMPUTERINC.:rnM5A97R2.0:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1393281/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395501] [NEW] input devices found, but there is no input level
Public bug reported: My input devices is found, but no not working. Get no input level from the devices. They are not muted! pavucontrol > Input Devices > no input level from any of my input devices! System settings > Sound > Input > no input level from any of my input devices! My computer is a Dell XPS 15 9530. Ubuntu 14.04 Kernel release:3.13.0-39-generic. ARECORD List of CAPTURE Hardware Devices card 1: G4ME1 [Sennheiser 3D G4ME1], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 2: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 "wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && chmod +x ./alsa-info.sh && ./alsa-info.sh" gives: http://www.alsa-project.org/db/?f=916914afd5195a1d4ed40f3f38fa0d37285d1039 Screenshot from alsamixer, pavucontrol and sound control menu. https://mrkr.io/pemHMWlKHR Teamspeak works fine, if I select recording device in pavucontrol for teamspeak. https://mrkr.io/5D0ZUSVyLC https://mrkr.io/T6nQX77HAD Testing in skype, no input is registered! https://mrkr.io/xMbrev28bR https://mrkr.io/zqu6AFVjld ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1395501 Title: input devices found, but there is no input level Status in “alsa-driver” package in Ubuntu: New Bug description: My input devices is found, but no not working. Get no input level from the devices. They are not muted! pavucontrol > Input Devices > no input level from any of my input devices! System settings > Sound > Input > no input level from any of my input devices! My computer is a Dell XPS 15 9530. Ubuntu 14.04 Kernel release:3.13.0-39-generic. ARECORD List of CAPTURE Hardware Devices card 1: G4ME1 [Sennheiser 3D G4ME1], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 2: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 "wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && chmod +x ./alsa-info.sh && ./alsa-info.sh" gives: http://www.alsa-project.org/db/?f=916914afd5195a1d4ed40f3f38fa0d37285d1039 Screenshot from alsamixer, pavucontrol and sound control menu. https://mrkr.io/pemHMWlKHR Teamspeak works fine, if I select recording device in pavucontrol for teamspeak. https://mrkr.io/5D0ZUSVyLC https://mrkr.io/T6nQX77HAD Testing in skype, no input is registered! https://mrkr.io/xMbrev28bR https://mrkr.io/zqu6AFVjld To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1395501/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1394893] Re: package ureadahead 0.100.0-16 failed to install/upgrade: triggers looping, abandoned
crashed while upgrading system -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ureadahead in Ubuntu. https://bugs.launchpad.net/bugs/1394893 Title: package ureadahead 0.100.0-16 failed to install/upgrade: triggers looping, abandoned Status in “ureadahead” package in Ubuntu: Fix Released Bug description: Happend on today's "sudo apt-get dist-upgrade" ProblemType: Package DistroRelease: Ubuntu 15.04 Package: ureadahead 0.100.0-16 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 Date: Fri Nov 21 09:17:23 2014 DuplicateSignature: package:ureadahead:0.100.0-16:triggers looping, abandoned ErrorMessage: triggers looping, abandoned InstallationDate: Installed on 2014-11-03 (17 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20141103) SourcePackage: ureadahead Title: package ureadahead 0.100.0-16 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ureadahead/+bug/1394893/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1354924] Re: Networkmanager does not autoconnect to wireless network
Debian actually does not have this problem after all. does that help anything? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1354924 Title: Networkmanager does not autoconnect to wireless network Status in “network-manager” package in Ubuntu: Confirmed Bug description: When adding a net wireless network and enable "connect automatically' networkmanager does not automatically connect to the network wenever possible. I'm running kubuntu 14.10 daily. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: network-manager 0.9.8.8-0ubuntu23 ProcVersionSignature: Ubuntu 3.16.0-6.11-generic 3.16.0-rc7 Uname: Linux 3.16.0-6-generic x86_64 ApportVersion: 2.14.5-0ubuntu4 Architecture: amd64 CurrentDesktop: KDE Date: Sun Aug 10 21:30:03 2014 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2014-07-11 (29 days ago) InstallationMedia: Kubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140710) IpRoute: default via 192.168.0.2 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.213 metric 9 SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1354924/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 969223] Re: Alt+F2 dialog reports 'There is nothing that matches ...'
Sometimes the search can find files and folders but not applications. Sometimes the search begins to work a little bit later. I have never had it find photos. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/969223 Title: Alt+F2 dialog reports 'There is nothing that matches ...' Status in Unity: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: The Alt+F2 dialog reports a message "Sorry, there is nothing that matches your search" before I have even typed a word. To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/969223/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395510] [NEW] package libgtk-3-0:amd64 3.12.2-0ubuntu16 failed to install/upgrade: triggers looping, abandoned
Public bug reported: Error while doing an "apt-get dist-upgrade" ProblemType: Package DistroRelease: Ubuntu 15.04 Package: libgtk-3-0:amd64 3.12.2-0ubuntu16 ProcVersionSignature: Ubuntu 3.18.0-3.4-generic 3.18.0-rc4 Uname: Linux 3.18.0-3-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 Date: Sun Nov 23 11:10:28 2014 DuplicateSignature: package:libgtk-3-0:amd64:3.12.2-0ubuntu16:triggers looping, abandoned ErrorMessage: triggers looping, abandoned InstallationDate: Installed on 2014-10-28 (26 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20141027) SourcePackage: gtk+3.0 Title: package libgtk-3-0:amd64 3.12.2-0ubuntu16 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package vivid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1395510 Title: package libgtk-3-0:amd64 3.12.2-0ubuntu16 failed to install/upgrade: triggers looping, abandoned Status in “gtk+3.0” package in Ubuntu: New Bug description: Error while doing an "apt-get dist-upgrade" ProblemType: Package DistroRelease: Ubuntu 15.04 Package: libgtk-3-0:amd64 3.12.2-0ubuntu16 ProcVersionSignature: Ubuntu 3.18.0-3.4-generic 3.18.0-rc4 Uname: Linux 3.18.0-3-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 Date: Sun Nov 23 11:10:28 2014 DuplicateSignature: package:libgtk-3-0:amd64:3.12.2-0ubuntu16:triggers looping, abandoned ErrorMessage: triggers looping, abandoned InstallationDate: Installed on 2014-10-28 (26 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20141027) SourcePackage: gtk+3.0 Title: package libgtk-3-0:amd64 3.12.2-0ubuntu16 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1395510/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395510] Re: package libgtk-3-0:amd64 3.12.2-0ubuntu16 failed to install/upgrade: triggers looping, abandoned
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1395510 Title: package libgtk-3-0:amd64 3.12.2-0ubuntu16 failed to install/upgrade: triggers looping, abandoned Status in “gtk+3.0” package in Ubuntu: New Bug description: Error while doing an "apt-get dist-upgrade" ProblemType: Package DistroRelease: Ubuntu 15.04 Package: libgtk-3-0:amd64 3.12.2-0ubuntu16 ProcVersionSignature: Ubuntu 3.18.0-3.4-generic 3.18.0-rc4 Uname: Linux 3.18.0-3-generic x86_64 ApportVersion: 2.14.7-0ubuntu10 Architecture: amd64 Date: Sun Nov 23 11:10:28 2014 DuplicateSignature: package:libgtk-3-0:amd64:3.12.2-0ubuntu16:triggers looping, abandoned ErrorMessage: triggers looping, abandoned InstallationDate: Installed on 2014-10-28 (26 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Alpha amd64 (20141027) SourcePackage: gtk+3.0 Title: package libgtk-3-0:amd64 3.12.2-0ubuntu16 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1395510/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395343] Re: Ubuntu 14.10 Utopic suspend/resume not working for my Laptop
Hello, have you checked disk for errors? Run fsck. Also please run apport-collect 1395343 Thanks -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pm-utils in Ubuntu. https://bugs.launchpad.net/bugs/1395343 Title: Ubuntu 14.10 Utopic suspend/resume not working for my Laptop Status in “pm-utils” package in Ubuntu: New Bug description: The Ubuntu 14.10 Utopic suspend/resume is not working for my Laptop. I first tried with the Live CD, on failing that, and thinking that suspend might need some disk to write to for the suspend info, I did a HD installation. But still, suspend/resume is still not working. On second attempt (after HD installation), I switched to console and close my Laptop lid. It suspended well, as it has always been. On resume, I see the repeating errors of `sda1` "soft reset failure" (or something like that). Minutes later, I start to see all kinds of disk related errors, disk sector writing error, ext4 journal error, etc. I thus think the reason of `resume` not working is that the HD is not waken up. This is Acer Aspire AS5536, with XUbuntu 14.10 Utopic. Any more info that I can provide? Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1395343/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395343] Re: Ubuntu 14.10 Utopic suspend/resume not working for my Laptop
This is a rarely used computer. I'm sure it is not disk errors, as it never gave any problem before, but failed to wake up the HD instead, each and every time that I tried. I got disk errors on other machines before, so I know what it means. I.e., if it is disk errors, the the error sequence reported above will be entirely different. No I can't use apport-collect, as it's function is to automatically generate crash reports for debugging. However my machine/SW does not crash, but freeze up entirely. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pm-utils in Ubuntu. https://bugs.launchpad.net/bugs/1395343 Title: Ubuntu 14.10 Utopic suspend/resume not working for my Laptop Status in “pm-utils” package in Ubuntu: New Bug description: The Ubuntu 14.10 Utopic suspend/resume is not working for my Laptop. I first tried with the Live CD, on failing that, and thinking that suspend might need some disk to write to for the suspend info, I did a HD installation. But still, suspend/resume is still not working. On second attempt (after HD installation), I switched to console and close my Laptop lid. It suspended well, as it has always been. On resume, I see the repeating errors of `sda1` "soft reset failure" (or something like that). Minutes later, I start to see all kinds of disk related errors, disk sector writing error, ext4 journal error, etc. I thus think the reason of `resume` not working is that the HD is not waken up. This is Acer Aspire AS5536, with XUbuntu 14.10 Utopic. Any more info that I can provide? Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1395343/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395530] [NEW] lightdm post-install script doesn't create /var/lib/lightdm if user already exists, preventing lightdm from starting
Public bug reported: I'm not sure if this really counts as a bug or if it's just an unsupported configuration, but the post-install script (lightdm.postinst) doesn't ensure that "/var/lib/lightdm" exists and has the correct permissions if the user already exists, since it is relying upon "adduser" to create the home directory and only does so if the "lightdm" user doesn't already exist. This prevents lightdm from starting and leads to a fallback X session being created instead, which doesn't give any helpful information about the underlying problem. The reason I already had a lightdm user in passwd is because I was bootstrapping Ubuntu in a chroot and copied passwd/shadow/group/gshadow into it before installing packages, since I wanted to make sure UID/GIDs would be consistent between the two installations. It would be nice if this case could be more gracefully handled, since I don't think it's all that unusual. ** Affects: lightdm (Ubuntu) Importance: Undecided Status: New ** Summary changed: - lightdm post-install script doesn't create var/lib/lightdm if user already exists, preventing lightdm from starting + lightdm post-install script doesn't create /var/lib/lightdm if user already exists, preventing lightdm from starting ** Description changed: I'm not sure if this really counts as a bug or if it's just an unsupported configuration, but the post-install script - (lightdm.postinst) doesn't ensure that "var/lib/lightdm" exists and has + (lightdm.postinst) doesn't ensure that "/var/lib/lightdm" exists and has the correct permissions if the user already exists, since it is relying upon "adduser" to create the home directory and only does so if the "lightdm" user doesn't already exists. This prevents lightdm from - starting and leads to a fallback X session being created instead. + starting and leads to a fallback X session being created instead, which + doesn't give any helpful information about the underlying problem. The reason I already had a lightdm user in passwd is because I was bootstrapping lightdm in a chroot and copied passwd/shadow/group/gshadow into it before installing packages, since I wanted to make sure UID/GIDs would be consistent between the two installations. It would be nice if - this case were more gracefully handled. + this case could be more gracefully handled. ** Description changed: I'm not sure if this really counts as a bug or if it's just an unsupported configuration, but the post-install script (lightdm.postinst) doesn't ensure that "/var/lib/lightdm" exists and has the correct permissions if the user already exists, since it is relying upon "adduser" to create the home directory and only does so if the "lightdm" user doesn't already exists. This prevents lightdm from starting and leads to a fallback X session being created instead, which doesn't give any helpful information about the underlying problem. The reason I already had a lightdm user in passwd is because I was - bootstrapping lightdm in a chroot and copied passwd/shadow/group/gshadow + bootstrapping Ubuntu in a chroot and copied passwd/shadow/group/gshadow into it before installing packages, since I wanted to make sure UID/GIDs would be consistent between the two installations. It would be nice if this case could be more gracefully handled. ** Description changed: I'm not sure if this really counts as a bug or if it's just an unsupported configuration, but the post-install script (lightdm.postinst) doesn't ensure that "/var/lib/lightdm" exists and has the correct permissions if the user already exists, since it is relying upon "adduser" to create the home directory and only does so if the "lightdm" user doesn't already exists. This prevents lightdm from starting and leads to a fallback X session being created instead, which doesn't give any helpful information about the underlying problem. The reason I already had a lightdm user in passwd is because I was bootstrapping Ubuntu in a chroot and copied passwd/shadow/group/gshadow into it before installing packages, since I wanted to make sure UID/GIDs would be consistent between the two installations. It would be nice if - this case could be more gracefully handled. + this case could be more gracefully handled, since I don't think it's all + that unusual. ** Description changed: I'm not sure if this really counts as a bug or if it's just an unsupported configuration, but the post-install script (lightdm.postinst) doesn't ensure that "/var/lib/lightdm" exists and has the correct permissions if the user already exists, since it is relying upon "adduser" to create the home directory and only does so if the - "lightdm" user doesn't already exists. This prevents lightdm from + "lightdm" user doesn't already exist. This prevents lightdm from starting and leads to a fallback X session being created instead, which doesn't give any helpful information about the un
[Touch-packages] [Bug 1079011] Re: stellarium assert failure: nv10_state_fb.c:50: get_rt_format: Assertion `0' failed.
I have removed Ubuntu from this machine, so can't test under Ubuntu. I am now running Sparky Linux (Debian testing). Stellarium still crashes after displaying the startup screen, but I'm now getting this error message: stellarium: ../../../../../../../src/mesa/drivers/dri/nouveau/nv10_render.c:104: get_hw_format: Assertion `0' failed. For whatever it's worth, I did the routine you described. The Stellarium startup screen appeared but didn't disappear. I had to kill the process. Here's the output: (gdb) run Starting program: /usr/local/bin/stellarium [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1". Using default graphics system specified at build time: raster [New Thread 0xb43deb40 (LWP 1146)] --- [ This is Stellarium 0.12.4 - http://www.stellarium.org ] [ Copyright (C) 2000-2013 Fabien Chereau et al ] --- Writing log file to: "/home//.stellarium/log.txt" File search paths: 0 . "/home//.stellarium" 1 . "/usr/local/share/stellarium" Attempting to use an existing older config file. Config file is: "/home//.stellarium/config.ini" Going to initialize the OpenGL 2 renderer OpenGL supported version: "1.2 Mesa 10.3.2" Qt GL paint engine is: "OpenGL" [New Thread 0xb1eacb40 (LWP 1157)] StelQGL2Renderer::init : Failed because Qt paint engine is not OpenGL2 If paint engine is OpenGL3 or higher, this code needs to be updated Failed to initialize the OpenGL 2 renderer, falling back to the OpenGL 1 renderer [Thread 0xb1eacb40 (LWP 1157) exited] OpenGL supported version: "1.2 Mesa 10.3.2" Qt GL paint engine is: "OpenGL" [New Thread 0xb1eacb40 (LWP 1158)] GL vendor is "Nouveau" GL renderer is "Mesa DRI nv18 x86/MMX+/3DNow!+/SSE2" Cache directory is: "/home/harrington/.cache/stellarium/stellarium" Sky language is "en_US" Application language is "en_US" Loading Solar System data ... Loaded 75 / 75 planet orbits from "/home//.stellarium/data/ssystem.ini" Loading star data ... "Loading "/usr/local/share/stellarium/stars/default/stars_0_0v0_3.cat": 0_0v0_2; 4963" "Loading "/usr/local/share/stellarium/stars/default/stars_1_0v0_3.cat": 1_0v0_2; 21598" "Loading "/usr/local/share/stellarium/stars/default/stars_2_0v0_3.cat": 2_0v0_2; 150090" "Loading "/usr/local/share/stellarium/stars/default/stars_3_1v0_2.cat": 3_1v0_1; 423540" Finished loading star catalogue data, max_geodesic_level: 3 navigation/preset_sky_time is a double - treating as jday: 2.45151e+06 Loaded 10051 NGC records Loading NGC name data ... Loaded 412 / 412 NGC name records successfully Loading star names from "/usr/local/share/stellarium/skycultures/western/star_names.fab" Loaded 236 / 236 common star names Loading star names from "/usr/local/share/stellarium/stars/default/name.fab" Loaded 4359 / 4359 scientific star names Loading variable stars from "/usr/local/share/stellarium/stars/default/gcvs_hip_part.dat" Loaded 6886 / 6886 variable stars Loaded 88 / 88 constellation records successfully for culture "western" Loaded 85 / 85 constellation art records successfully for culture "western" Loaded 89 / 89 constellation names Loading constellation boundary data ... Loaded 782 constellation boundary segments Not using any viewport effect [New Thread 0xafe90b40 (LWP 1159)] Creating GUI ... Loading shortcuts... Can't find plugin with id "RendererStatistics" Can't find plugin with id "RendererStatistics" Loaded plugin "Oculars" . Ocular plugin - press Command-O to toggle eyepiece view mode. Press ALT-o for configuration. Oculars::validateIniFile ocular.ini exists at: "/home/harrington/.stellarium/modules/Oculars/ocular.ini" . Checking version... Oculars::validateIniFile found existing ini file version 2 Loaded plugin "Satellites" . Satellites: loading catalog file: "/home/harrington/.stellarium/modules/Satellites/satellites.json" Satellite has invalid orbit: "SL-3 R/B" "10861" Satellite has invalid orbit: "TIANGONG 1" "37820" Loaded plugin "SolarSystemEditor" . Using the ssystem.ini file that already exists in the user directory... Loaded plugin "TimeZoneConfiguration" . QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. QGLFramebufferObject: Framebuffer incomplete attachment. OpenGL error detected at "drawWindow() start" : "GL_INVALID_VALUE" stellarium: ../../../../../../../src/mesa/drivers/dri/nouveau/nv10_render.
[Touch-packages] [Bug 1281061] Re: initctl eating cpu on mako #181
I haven't experienced this issue on recent 14.09 images. However, now I have a proces called "init" (not the one with PID 1) that takes 200 megs of RAM and constantly about 15% of CPU: top - 22:10:19 up 2 days, 11:13, 2 users, load average: 2,88, 3,48, 3,44 Tasks: 304 total, 3 running, 291 sleeping, 10 stopped, 0 zombie %Cpu(s): 37,1 us, 62,4 sy, 0,0 ni, 0,0 id, 0,0 wa, 0,0 hi, 0,5 si, 0,0 st KiB Mem: 1878572 total, 1811868 used,66704 free, 143000 buffers KiB Swap:32764 total, 1696 used,31068 free. 477768 cached Mem PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 1453 phablet 20 0 215936 210984 1216 R 14,5 11,2 282:48.96 init 766 message+ 20 0 18100 15588756 S 4,2 0,8 139:55.43 dbus-daemon 2765 phablet 20 0 552016 158796 59224 R 3,9 8,5 87:28.12 unity8 1139 root 0 -207572552400 S 2,3 0,0 67:09.50 mpdecision 1574 phablet 20 05344 2428748 S 2,3 0,1 69:27.50 dbus-daemon 988 root 20 09744 1260796 S 1,9 0,1 47:23.86 systemd-udevd 1 root 20 04412 2884 1112 S 1,3 0,2 31:58.40 init 1691 phablet 20 05608448260 S 1,3 0,0 35:44.75 upstart-dbus-br 26167 phablet 20 06492 1396860 R 1,3 0,1 0:00.42 top This time, I have strace installed and recorded a few seconds of its output. Do you think this is related, or should I open a new bug for this? ** Attachment added: "strace output of process "init", PID 1453" https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1281061/+attachment/4266339/+files/init.strace.txt.gz -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upstart in Ubuntu. https://bugs.launchpad.net/bugs/1281061 Title: initctl eating cpu on mako #181 Status in “upstart” package in Ubuntu: Expired Bug description: On Ubuntu image #181 on mako my phone is hot. I checked top and found initctl eating 96% of the cpu.. This may be related to bug 1281057 as my phone refuses to lock. Unfortunately I couldn't get the bug report done on the phone because the battery died (unsurprisingly) mid way through reporting it. Managed to get this output from top though. top - 10:34:05 up 1 day, 20:23, 1 user, load average: 4.19, 4.14, 3.82 Tasks: 244 total, 2 running, 242 sleeping, 0 stopped, 0 zombie %Cpu(s): 49.1 us, 5.4 sy, 0.0 ni, 45.1 id, 0.4 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 1916236 total, 1855748 used,60488 free,18420 buffers KiB Swap: 524284 total, 115420 used, 408864 free. 196160 cached Mem PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 1981 phablet 20 0 679256 665780 1160 S 0.3 34.7 33:23.31 init 586 message+ 20 0 280608 276924712 S 0.0 14.5 26:18.81 dbus-daemon 1 root 20 0 210636 206636 1056 S 0.0 10.8 12:16.86 init 2211 phablet 20 0 553308 127668 77840 S 85.7 6.7 49:53.31 unity8 598 root 20 0 88792 86892584 R 96.1 4.5 433:39.94 initctl 2318 phablet 20 0 296952 40432 33060 S 0.0 2.1 0:26.02 maliit-ser+ 1903 root 20 0 241404 27880 20500 S 13.0 1.5 10:27.68 unity-syst+ 9631 phablet 20 0 216224 19924 14828 S 0.0 1.0 0:01.78 telephony-+ 2350 phablet 20 0 55260 19540 2776 S 0.0 1.0 1:28.08 indicator-+ 1052 root 20 0 52248 19244 2252 S 0.0 1.0 22:39.85 upowerd 2080 phablet 20 0 47300 12604 3396 S 0.0 0.7 1:43.27 mission-co+ 9368 phablet 20 0 80832 11872 9988 S 0.0 0.6 0:00.61 telephony-+ 1062 root 20 0 42916 11548 2544 S 0.0 0.6 84:53.39 polkitd 2205 phablet 20 0 96980 11464 9280 S 0.0 0.6 0:05.66 hud-service 9360 phablet 20 0 52164 9592 8120 S 0.0 0.5 0:00.21 telephony-+ 2234 phablet 2
[Touch-packages] [Bug 684745] Re: Alt-tab causes compiz assert failure: compiz: main/mipmap.c:43: bytes_per_pixel: Assertion `b >= 0' failed.
** Changed in: mesa Status: Incomplete => Invalid ** Changed in: mesa (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/684745 Title: Alt-tab causes compiz assert failure: compiz: main/mipmap.c:43: bytes_per_pixel: Assertion `b >= 0' failed. Status in Mesa: Invalid Status in “mesa” package in Ubuntu: Invalid Bug description: Binary package hint: compiz there is a strange dashed line in the upper panel ProblemType: Crash DistroRelease: Ubuntu 11.04 Package: compiz-core 1:0.9.2.1+glibmainloop2-0ubuntu4 ProcVersionSignature: Ubuntu 2.6.37-7.19-generic 2.6.37-rc3 Uname: Linux 2.6.37-7-generic i686 NonfreeKernelModules: fglrx Architecture: i386 AssertionMessage: compiz: main/mipmap.c:43: bytes_per_pixel: Assertion `b >= 0' failed. CompizPlugins: No value set for `/apps/compiz/general/allscreens/options/active_plugins' Date: Fri Dec 3 14:15:25 2010 ExecutablePath: /usr/bin/compiz LiveMediaBuild: Ubuntu 11.04 "Natty Narwhal" - Alpha i386 (20101202) MachineType: Hewlett-Packard HP Pavilion dv7 Notebook PC PciDisplay: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M96 [Mobility Radeon HD 4650] [1002:9480] (prog-if 00 [VGA controller]) ProcCmdline: /usr/bin/compiz ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/hostname.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz RelatedPackageVersions: xserver-xorg 1:7.5+6ubuntu3b1 libgl1-mesa-glx 7.9+repack-1ubuntu2 libdrm2 2.4.22-2ubuntu1 xserver-xorg-video-intel 2:2.13.901-2ubuntu1 xserver-xorg-video-ati 1:6.13.2-1ubuntu2 Signal: 6 SourcePackage: compiz StacktraceTop: __kernel_vsyscall () raise () from /lib/libc.so.6 abort () from /lib/libc.so.6 __assert_fail () from /lib/libc.so.6 ?? () from /usr/lib/dri/libdricore.so Title: compiz assert failure: compiz: main/mipmap.c:43: bytes_per_pixel: Assertion `b >= 0' failed. UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 02/24/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.03 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3064 dmi.board.vendor: Quanta dmi.board.version: 19.0B dmi.chassis.type: 10 dmi.chassis.vendor: Quanta dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.03:bd02/24/2009:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvrRev1:rvnQuanta:rn3064:rvr19.0B:cvnQuanta:ct10:cvrN/A: dmi.product.name: HP Pavilion dv7 Notebook PC dmi.product.version: Rev 1 dmi.sys.vendor: Hewlett-Packard glxinfo: Error: [Errno 2] No such file or directory system: distro = Ubuntu, architecture = i686, kernel = 2.6.37-7-generic To manage notifications about this bug go to: https://bugs.launchpad.net/mesa/+bug/684745/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1393542] Re: SRU: exfat not detected by blkid
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: util-linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1393542 Title: SRU: exfat not detected by blkid Status in “util-linux” package in Ubuntu: Confirmed Status in “util-linux” source package in Trusty: Invalid Status in “util-linux” source package in Utopic: Confirmed Bug description: [Impact] Due to a upstream bug blkid is unable to detect exfat partitions. This breaks proper detection and automount of exfat formatted partitions (e.g. SD cards or USB sticks) in Ubuntu 14.10. [Test Case] Insert an exfat formatted SD Card (card is neither detected nor automounted) or run as root: blkid [partition] [Regression Potential] None known, the bugfix is simple and part of already released upstream stable release (2.25.2). [Other Info] Bug reference: bug #1389021 Upstream issue: https://github.com/karelzak/util-linux/issues/119 Upstream bugfix commit: https://github.com/karelzak/util-linux/commit/98b539c25caede8534ffaf06e67a694eeb3bc6cb To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1393542/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1393542] Re: SRU: exfat not detected by blkid
** Changed in: util-linux (Ubuntu Utopic) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1393542 Title: SRU: exfat not detected by blkid Status in “util-linux” package in Ubuntu: Confirmed Status in “util-linux” source package in Trusty: Invalid Status in “util-linux” source package in Utopic: Confirmed Bug description: [Impact] Due to a upstream bug blkid is unable to detect exfat partitions. This breaks proper detection and automount of exfat formatted partitions (e.g. SD cards or USB sticks) in Ubuntu 14.10. [Test Case] Insert an exfat formatted SD Card (card is neither detected nor automounted) or run as root: blkid [partition] [Regression Potential] None known, the bugfix is simple and part of already released upstream stable release (2.25.2). [Other Info] Bug reference: bug #1389021 Upstream issue: https://github.com/karelzak/util-linux/issues/119 Upstream bugfix commit: https://github.com/karelzak/util-linux/commit/98b539c25caede8534ffaf06e67a694eeb3bc6cb To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1393542/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1254085] Re: ssh fails to connect to VPN host - hangs at 'expecting SSH2_MSG_KEX_ECDH_REPLY'
it works when turning off DTLS -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openssh in Ubuntu. https://bugs.launchpad.net/bugs/1254085 Title: ssh fails to connect to VPN host - hangs at 'expecting SSH2_MSG_KEX_ECDH_REPLY' Status in “openssh” package in Ubuntu: Confirmed Bug description: ssh -vvv is failing for me where is a VPN system. VPN is configured and connected via network-manager. Last messages from ssh (hangs forever): debug2: kex_parse_kexinit: none,z...@openssh.com debug2: kex_parse_kexinit: none,z...@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY = Workaround = $ sudo apt-get install putty $ putty This works perfectly. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: openssh-client 1:6.4p1-1 ProcVersionSignature: Ubuntu 3.12.0-3.8-generic 3.12.0 Uname: Linux 3.12.0-3-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.12.7-0ubuntu1 Architecture: i386 CurrentDesktop: Unity Date: Fri Nov 22 15:37:18 2013 InstallationDate: Installed on 2010-10-21 (1128 days ago) InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) RelatedPackageVersions: ssh-askpass 1:1.2.4.1-9 libpam-sshN/A keychain 2.7.1-1 ssh-askpass-gnome 1:6.4p1-1 SSHClientVersion: OpenSSH_6.4p1 Ubuntu-1, OpenSSL 1.0.1e 11 Feb 2013 SourcePackage: openssh UpgradeStatus: Upgraded to trusty on 2013-11-01 (20 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1254085/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1296425] Re: pulseaudio is started twice - effectively making device management impossible.
I tried applying the patch in comment 22 to my 14.04 installation (3.13.0-39-generic, upgraded from 12.04) and rebooting, but it didn't solve the problem with my Logitec webcam microphone. I still get the same error. ubuntu-drivers-common 1:0.2.91.7 is the currently installed version. Are they any other scripts that might be doing the same thing? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-plugins in Ubuntu. https://bugs.launchpad.net/bugs/1296425 Title: pulseaudio is started twice - effectively making device management impossible. Status in “alsa-plugins” package in Ubuntu: Invalid Status in “ubuntu-drivers-common” package in Ubuntu: Fix Released Status in “alsa-plugins” source package in Trusty: Invalid Status in “ubuntu-drivers-common” source package in Trusty: Triaged Bug description: On the current kubuntu 14.04 live-image (and for a 13.10 upgraded system) pulseaudio is running twice. This makes attaching/deattaching of usb-headset and other stuff impossible because the two instances fight ove rthe events. Tow reproduce just boot up the current image and do a "ps -ef | grep pulseaudio" ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu10 ProcVersionSignature: Ubuntu 3.13.0-19.39-lowlatency 3.13.6 Uname: Linux 3.13.0-19-lowlatency i686 ApportVersion: 2.13.3-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgh2336 F pulseaudio sgh2796 F pulseaudio /dev/snd/controlC0: sgh2336 F pulseaudio sgh2796 F pulseaudio CurrentDesktop: KDE Date: Sun Mar 23 22:36:50 2014 InstallationDate: Installed on 2013-12-24 (89 days ago) InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131224) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/02/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G7ET31WW (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 2356GCG dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG7ET31WW(1.13):bd07/02/2012:svnLENOVO:pn2356GCG:pvrThinkPadT430s:rvnLENOVO:rn2356GCG:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2356GCG dmi.product.version: ThinkPad T430s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-plugins/+bug/1296425/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1296425] Re: pulseaudio is started twice - effectively making device management impossible.
Forgot to mention I am using Gnome3 shell, not Unity or KDE. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-plugins in Ubuntu. https://bugs.launchpad.net/bugs/1296425 Title: pulseaudio is started twice - effectively making device management impossible. Status in “alsa-plugins” package in Ubuntu: Invalid Status in “ubuntu-drivers-common” package in Ubuntu: Fix Released Status in “alsa-plugins” source package in Trusty: Invalid Status in “ubuntu-drivers-common” source package in Trusty: Triaged Bug description: On the current kubuntu 14.04 live-image (and for a 13.10 upgraded system) pulseaudio is running twice. This makes attaching/deattaching of usb-headset and other stuff impossible because the two instances fight ove rthe events. Tow reproduce just boot up the current image and do a "ps -ef | grep pulseaudio" ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu10 ProcVersionSignature: Ubuntu 3.13.0-19.39-lowlatency 3.13.6 Uname: Linux 3.13.0-19-lowlatency i686 ApportVersion: 2.13.3-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgh2336 F pulseaudio sgh2796 F pulseaudio /dev/snd/controlC0: sgh2336 F pulseaudio sgh2796 F pulseaudio CurrentDesktop: KDE Date: Sun Mar 23 22:36:50 2014 InstallationDate: Installed on 2013-12-24 (89 days ago) InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131224) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/02/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G7ET31WW (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 2356GCG dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG7ET31WW(1.13):bd07/02/2012:svnLENOVO:pn2356GCG:pvrThinkPadT430s:rvnLENOVO:rn2356GCG:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2356GCG dmi.product.version: ThinkPad T430s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-plugins/+bug/1296425/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1079011] Re: stellarium assert failure: nv10_state_fb.c:50: get_rt_format: Assertion `0' failed.
> stellarium: > ../../../../../../../src/mesa/drivers/dri/nouveau/nv10_render.c:104: > get_hw_format: Assertion `0' failed. That also appears to mean "invalid format", so is probably the same bug. > For whatever it's worth, I did the routine you described. The Stellarium > startup screen appeared but didn't disappear. That's expected when something crashes under a debugger: please switch back to the debugger window (Alt+Tab), type "thread apply all bt full" and post the output. (You can then close the debugger and program with "quit".) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1079011 Title: stellarium assert failure: nv10_state_fb.c:50: get_rt_format: Assertion `0' failed. Status in “flightgear” package in Ubuntu: New Status in “mesa” package in Ubuntu: Incomplete Status in “stellarium” package in Ubuntu: Confirmed Bug description: Stellarium crashes a few seconds after displaying the startup screen with this message in terminal: nv10_state_fb.c:50: get_rt_format: Assertion `0' failed. I have an nvidia GeForce4 MX 4000 video card, and have installed libgl1-mesa-dri and libgl1-mesa-dri-experimental, version 9.0-0ubuntu1. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: stellarium 0.11.3-1 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic i686 ApportVersion: 2.6.1-0ubuntu6 Architecture: i386 Date: Wed Nov 14 22:52:36 2012 InstallationDate: Installed on 2012-04-05 (224 days ago) InstallationMedia: Xubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) MarkForUpload: True ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: stellarium UpgradeStatus: Upgraded to quantal on 2012-10-20 (25 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/flightgear/+bug/1079011/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395555] [NEW] powerd eats 100% CPU on mako
Public bug reported: After charging the phone on a USB port of a PC with a cheap USB cable, the battery is nearly drained and powerd is taking 100% CPU time. dbus- daemon is at about 25%. top - 01:50:35 up 2 days, 14:53, 2 users, load average: 3,67, 3,96, 5,22 Tasks: 274 total, 3 running, 258 sleeping, 13 stopped, 0 zombie %Cpu(s): 0,0 us, 0,0 sy, 0,0 ni,100,0 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st KiB Mem: 1878572 total, 1831220 used,47352 free, 138200 buffers KiB Swap:32764 total, 2252 used,30512 free. 363644 cached Mem PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 959 root 20 0 142588 77576 6796 R 93,3 4,1 43:13.63 powerd 766 message+ 20 0 19184 15964756 S 25,9 0,8 186:40.76 dbus-daemon 1453 phablet 20 0 222080 216792 1216 S 11,5 11,5 296:37.46 init 2765 phablet 20 0 562320 157888 59228 R 4,2 8,4 97:40.70 unity8 1012 phablet 20 0 52348 2464 2024 D 2,6 0,1 0:00.08 mtp-server 1574 phablet 20 05344 2428748 S 1,9 0,1 71:45.05 dbus-daemon 1139 root 0 -207572552400 S 1,6 0,0 69:42.90 mpdecision 1601 root 20 0 53132 19412 3076 S 1,6 1,0 18:22.89 upowerd 32612 phablet 20 06492 1380860 R 1,3 0,1 0:00.90 top Attached are strace outputs of both processes. Note that I'm currently also experiencing problems with init (lp:1281061), which might interfere with the output of dbus-daemon. ProblemType: Bug DistroRelease: Ubuntu RTM 14.09 Package: powerd 0.16+14.10.20141027~rtm-0ubuntu1 Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.14.7-0ubuntu8 Architecture: armhf Date: Mon Nov 24 01:57:53 2014 ExecutablePath: /usr/bin/powerd InstallationDate: Installed on 2014-11-14 (9 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20141114-104944) LocalLibraries: /android/system/lib/libsync.so /android/system/lib/liblog.so /android/system/lib/libc.so /android/system/lib/libinput.so /android/system/lib/libEGL.so /android/system/lib/libdsyscalls.so /android/system/lib/libgccdemangle.so /android/system/lib/libbinder.so /android/system/lib/libutils.so /android/system/lib/libhardware.so /android/system/lib/libwpa_client.so /android/system/lib/libcorkscrew.so /android/system/lib/libhardware_legacy.so /android/system/lib/hw/lights.msm8960.so /android/system/lib/libcutils.so /android/system/lib/libandroidfw.so /android/system/lib/libnetutils.so /android/system/lib/libm.so /android/system/lib/hw/power.msm8960.so /android/system/lib/libz.so /android/system/lib/libGLESv2.so /android/system/lib/libstdc++.so /android/system/lib/libstlport.so /android/system/lib/libubuntu_application_api.so /android/system/lib/libgui.so /android/system/lib/libGLES_trace.so /android/system/lib/libui.so ProcEnviron: PATH=(custom, no user) TERM=linux SourcePackage: powerd UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: powerd (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug armhf local-libs utopic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to powerd in Ubuntu. https://bugs.launchpad.net/bugs/139 Title: powerd eats 100% CPU on mako Status in “powerd” package in Ubuntu: New Bug description: After charging the phone on a USB port of a PC with a cheap USB cable, the battery is nearly drained and powerd is taking 100% CPU time. dbus-daemon is at about 25%. top - 01:50:35 up 2 days, 14:53, 2 users, load average: 3,67, 3,96, 5,22 Tasks: 274 total, 3 running, 258 sleeping, 13 stopped, 0 zombie %Cpu(s): 0,0 us, 0,0 sy, 0,0 ni,100,0 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st KiB Mem: 1878572 total, 1831220 used,47352 free, 138200 buffers KiB Swap:32764 total, 2252 used,30512 free. 363644 cached Mem PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND
[Touch-packages] [Bug 1395555] Re: powerd eats 100% CPU on mako
** Attachment added: "powerd.strace.txt.gz" https://bugs.launchpad.net/ubuntu/+source/powerd/+bug/139/+attachment/4266422/+files/powerd.strace.txt.gz -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to powerd in Ubuntu. https://bugs.launchpad.net/bugs/139 Title: powerd eats 100% CPU on mako Status in “powerd” package in Ubuntu: New Bug description: After charging the phone on a USB port of a PC with a cheap USB cable, the battery is nearly drained and powerd is taking 100% CPU time. dbus-daemon is at about 25%. top - 01:50:35 up 2 days, 14:53, 2 users, load average: 3,67, 3,96, 5,22 Tasks: 274 total, 3 running, 258 sleeping, 13 stopped, 0 zombie %Cpu(s): 0,0 us, 0,0 sy, 0,0 ni,100,0 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st KiB Mem: 1878572 total, 1831220 used,47352 free, 138200 buffers KiB Swap:32764 total, 2252 used,30512 free. 363644 cached Mem PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 959 root 20 0 142588 77576 6796 R 93,3 4,1 43:13.63 powerd 766 message+ 20 0 19184 15964756 S 25,9 0,8 186:40.76 dbus-daemon 1453 phablet 20 0 222080 216792 1216 S 11,5 11,5 296:37.46 init 2765 phablet 20 0 562320 157888 59228 R 4,2 8,4 97:40.70 unity8 1012 phablet 20 0 52348 2464 2024 D 2,6 0,1 0:00.08 mtp-server 1574 phablet 20 05344 2428748 S 1,9 0,1 71:45.05 dbus-daemon 1139 root 0 -207572552400 S 1,6 0,0 69:42.90 mpdecision 1601 root 20 0 53132 19412 3076 S 1,6 1,0 18:22.89 upowerd 32612 phablet 20 06492 1380860 R 1,3 0,1 0:00.90 top Attached are strace outputs of both processes. Note that I'm currently also experiencing problems with init (lp:1281061), which might interfere with the output of dbus-daemon. ProblemType: Bug DistroRelease: Ubuntu RTM 14.09 Package: powerd 0.16+14.10.20141027~rtm-0ubuntu1 Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.14.7-0ubuntu8 Architecture: armhf Date: Mon Nov 24 01:57:53 2014 ExecutablePath: /usr/bin/powerd InstallationDate: Installed on 2014-11-14 (9 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20141114-104944) LocalLibraries: /android/system/lib/libsync.so /android/system/lib/liblog.so /android/system/lib/libc.so /android/system/lib/libinput.so /android/system/lib/libEGL.so /android/system/lib/libdsyscalls.so /android/system/lib/libgccdemangle.so /android/system/lib/libbinder.so /android/system/lib/libutils.so /android/system/lib/libhardware.so /android/system/lib/libwpa_client.so /android/system/lib/libcorkscrew.so /android/system/lib/libhardware_legacy.so /android/system/lib/hw/lights.msm8960.so /android/system/lib/libcutils.so /android/system/lib/libandroidfw.so /android/system/lib/libnetutils.so /android/system/lib/libm.so /android/system/lib/hw/power.msm8960.so /android/system/lib/libz.so /android/system/lib/libGLESv2.so /android/system/lib/libstdc++.so /android/system/lib/libstlport.so /android/system/lib/libubuntu_application_api.so /android/system/lib/libgui.so /android/system/lib/libGLES_trace.so /android/system/lib/libui.so ProcEnviron: PATH=(custom, no user) TERM=linux SourcePackage: powerd UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/powerd/+bug/139/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1395555] Re: powerd eats 100% CPU on mako
** Attachment added: "dbus-daemon.strace.txt.gz" https://bugs.launchpad.net/ubuntu/+source/powerd/+bug/139/+attachment/4266423/+files/dbus-daemon.strace.txt.gz -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to powerd in Ubuntu. https://bugs.launchpad.net/bugs/139 Title: powerd eats 100% CPU on mako Status in “powerd” package in Ubuntu: New Bug description: After charging the phone on a USB port of a PC with a cheap USB cable, the battery is nearly drained and powerd is taking 100% CPU time. dbus-daemon is at about 25%. top - 01:50:35 up 2 days, 14:53, 2 users, load average: 3,67, 3,96, 5,22 Tasks: 274 total, 3 running, 258 sleeping, 13 stopped, 0 zombie %Cpu(s): 0,0 us, 0,0 sy, 0,0 ni,100,0 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st KiB Mem: 1878572 total, 1831220 used,47352 free, 138200 buffers KiB Swap:32764 total, 2252 used,30512 free. 363644 cached Mem PID USER PR NIVIRTRESSHR S %CPU %MEM TIME+ COMMAND 959 root 20 0 142588 77576 6796 R 93,3 4,1 43:13.63 powerd 766 message+ 20 0 19184 15964756 S 25,9 0,8 186:40.76 dbus-daemon 1453 phablet 20 0 222080 216792 1216 S 11,5 11,5 296:37.46 init 2765 phablet 20 0 562320 157888 59228 R 4,2 8,4 97:40.70 unity8 1012 phablet 20 0 52348 2464 2024 D 2,6 0,1 0:00.08 mtp-server 1574 phablet 20 05344 2428748 S 1,9 0,1 71:45.05 dbus-daemon 1139 root 0 -207572552400 S 1,6 0,0 69:42.90 mpdecision 1601 root 20 0 53132 19412 3076 S 1,6 1,0 18:22.89 upowerd 32612 phablet 20 06492 1380860 R 1,3 0,1 0:00.90 top Attached are strace outputs of both processes. Note that I'm currently also experiencing problems with init (lp:1281061), which might interfere with the output of dbus-daemon. ProblemType: Bug DistroRelease: Ubuntu RTM 14.09 Package: powerd 0.16+14.10.20141027~rtm-0ubuntu1 Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.14.7-0ubuntu8 Architecture: armhf Date: Mon Nov 24 01:57:53 2014 ExecutablePath: /usr/bin/powerd InstallationDate: Installed on 2014-11-14 (9 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20141114-104944) LocalLibraries: /android/system/lib/libsync.so /android/system/lib/liblog.so /android/system/lib/libc.so /android/system/lib/libinput.so /android/system/lib/libEGL.so /android/system/lib/libdsyscalls.so /android/system/lib/libgccdemangle.so /android/system/lib/libbinder.so /android/system/lib/libutils.so /android/system/lib/libhardware.so /android/system/lib/libwpa_client.so /android/system/lib/libcorkscrew.so /android/system/lib/libhardware_legacy.so /android/system/lib/hw/lights.msm8960.so /android/system/lib/libcutils.so /android/system/lib/libandroidfw.so /android/system/lib/libnetutils.so /android/system/lib/libm.so /android/system/lib/hw/power.msm8960.so /android/system/lib/libz.so /android/system/lib/libGLESv2.so /android/system/lib/libstdc++.so /android/system/lib/libstlport.so /android/system/lib/libubuntu_application_api.so /android/system/lib/libgui.so /android/system/lib/libGLES_trace.so /android/system/lib/libui.so ProcEnviron: PATH=(custom, no user) TERM=linux SourcePackage: powerd UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/powerd/+bug/139/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1359486] Re: [PPA] "Use LibreOffice Dialogs" setting is ignored in KDE
** Changed in: libreoffice (Ubuntu) Importance: Undecided => Medium ** Changed in: qt4-x11 (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qt4-x11 in Ubuntu. https://bugs.launchpad.net/bugs/1359486 Title: [PPA] "Use LibreOffice Dialogs" setting is ignored in KDE Status in LibreOffice Productivity Suite: Won't Fix Status in “libreoffice” package in Ubuntu: Fix Released Status in “qt4-x11” package in Ubuntu: Confirmed Bug description: Kubuntu 14.04 (KDE Desktop Environment) Packages from this ppa: https://launchpad.net/~libreoffice Version: 4.3.0-3ubuntu2~trusty1 (as reported by dpkg, note updated packages as of about 1 hour ago) or 4.3.0.4 Build ID: 430m0(Build:4) as reported by LibreOffice about dialog. LibreOffice uses it's native filepicker/save dialogs, regardless of whether the config option "Use LibreOffice Dialogs" is ticked or not. This is a regression from 4.2.4-0ubuntu2 currently in the main ubuntu security repository. Related Bugs: https://bugreports.qt-project.org/browse/QTBUG-38585 https://bugreports.qt-project.org/browse/QTBUG-34614 According to the LO team, both these bugs have patches that address the automatic disabling of Qt dialogs at runtime (if buggy Qt is detected.) Initial report/discussion on LO bugtracker (now closed) here: https://bugs.freedesktop.org/show_bug.cgi?id=82598 To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1359486/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1321397] Re: FlashPlayer 10 Handshake patch not found
** Changed in: rtmpdump (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to rtmpdump in Ubuntu. https://bugs.launchpad.net/bugs/1321397 Title: FlashPlayer 10 Handshake patch not found Status in “rtmpdump” package in Ubuntu: Confirmed Bug description: rtmpdump is a dependency of tv-maxe (ppa:venerix/pkg) (trusty) when runtest from the tv-maxe app is ran, FFMPEG is not found. The error detail is: "Flashpayer 10 Handshake patch is not found" On this Utopic i386 system, flashplugin-installer & peperflashplugin-nonfree are installed (from archive) I've tried to install directly adobe-flashplugin, but rtmpdump is still blind. Installing also libav-tools does not help. As per the tv-maxe wiki, the missing patch is related to "xeebo" http://code.google.com/p/tv-maxe/wiki/BetterRTMPsupport So librtmp 2.5 is required, and libav 7:1.2.5 at least ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: rtmpdump 2.4+20131018.git79459a2-2 ProcVersionSignature: Ubuntu 3.15.0-1.4-generic 3.15.0-rc5 Uname: Linux 3.15.0-1-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.14.2-0ubuntu4 Architecture: i386 CurrentDesktop: GNOME Date: Tue May 20 19:48:19 2014 SourcePackage: rtmpdump UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rtmpdump/+bug/1321397/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1328610] Re: ubuntu-sdk cannot create emulator device without depending on ubuntu-emulator (missing dependency)
** Also affects: hundredpapercuts Importance: Undecided Status: New ** Changed in: hundredpapercuts Status: New => Confirmed ** Changed in: ubuntu-touch-meta (Ubuntu) Importance: Undecided => High ** Changed in: hundredpapercuts Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-touch-meta in Ubuntu. https://bugs.launchpad.net/bugs/1328610 Title: ubuntu-sdk cannot create emulator device without depending on ubuntu- emulator (missing dependency) Status in One Hundred Papercuts: Confirmed Status in “ubuntu-touch-meta” package in Ubuntu: Confirmed Bug description: Hi. Running daily 14.10 on a new machine I installed ubuntu-sdk and tried to add a emulator device. That failed (after prompting for my password) without any obvious traces. I checked that ubuntu-emulator package is not installed and installing it fixed the issue. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: ubuntu-sdk 1.145 ProcVersionSignature: Ubuntu 3.15.0-5.10-generic 3.15.0-rc8 Uname: Linux 3.15.0-5-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.3-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Tue Jun 10 18:55:07 2014 InstallationDate: Installed on 2014-01-13 (148 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140112) SourcePackage: ubuntu-touch-meta UpgradeStatus: Upgraded to utopic on 2014-06-09 (1 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1328610/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1332858] Re: Speaker icon should change to indicate that sound is muted
** Changed in: indicator-sound (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1332858 Title: Speaker icon should change to indicate that sound is muted Status in “indicator-sound” package in Ubuntu: Confirmed Bug description: The speaker icon on the menu bar should change to indicate that the sound is muted. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: indicator-sound 12.10.2+14.10.20140611-0ubuntu1 Uname: Linux 3.4.0-5-mako armv7l ApportVersion: 2.14.3-0ubuntu2 Architecture: armhf Date: Sat Jun 21 11:25:24 2014 InstallationDate: Installed on 2014-06-19 (2 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140619.1) SourcePackage: indicator-sound UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1332858/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1365759] Re: /usr/bin/add-apt-repository:OSError:/usr/bin/add-apt-repository@163:add_source_from_shortcut:set_modified_sourceslist:save_sourceslist:backup:copy:copyfile
@ Brian Murray If you think this bug is caused by an user misconfiguration, please set its status to "invalid". ** Changed in: software-properties (Ubuntu) Status: In Progress => Confirmed ** Changed in: software-properties (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1365759 Title: /usr/bin/add-apt-repository:OSError:/usr/bin/add-apt- repository@163:add_source_from_shortcut:set_modified_sourceslist:save_sourceslist:backup:copy:copyfile Status in “software-properties” package in Ubuntu: Confirmed Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding software-properties. This problem was most recently seen with version 0.92.37.1, the problem page at https://errors.ubuntu.com/problem/2b8bba9b95a33d09f53d20dbb0664e85d407d788 contains more details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1365759/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1371481] Re: Network Manager's Upstart configuration is wrong - Network Manager doesn't start in case of faulty ifupdown configuration
** Also affects: hundredpapercuts Importance: Undecided Status: New ** Changed in: hundredpapercuts Status: New => Confirmed ** Changed in: network-manager (Ubuntu) Importance: Undecided => Low ** Changed in: hundredpapercuts Importance: Undecided => Low ** Changed in: hundredpapercuts Importance: Low => High ** Changed in: network-manager (Ubuntu) Importance: Low => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1371481 Title: Network Manager's Upstart configuration is wrong - Network Manager doesn't start in case of faulty ifupdown configuration Status in One Hundred Papercuts: Confirmed Status in “network-manager” package in Ubuntu: Confirmed Bug description: Hi everyone, If you add a faulty entry to ifupdown's configuration (/etc/network/interfaces or sourced in files) then Network Manager doesn't get started by Upstart. As an example add this block for a non-existent network interface to /etc/network/interfaces: auto bogus0 iface bogus0 inet dhcp If you reboot your machine then Network Manager won't be started by Upstart. The issue with Network Manager's Upstart configuration is that it starts on the following condition: start on (local-filesystems and started dbus and static-network-up) This is wrong as the static-network-up event is never emitted in case the ifupdown configuration is (partially) invalid. In order to fix this issue please use the following start on condition: start on (local-filesystems and started dbus and started networking) This is an issue in all currently supported Ubuntu releases. Please let me know if you have any further questions. Best, Michael Schaller To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1371481/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1376571] Re: After login, gcr-prompter pops up several times in a row, never accepting my passwords
** Changed in: gcr (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gcr in Ubuntu. https://bugs.launchpad.net/bugs/1376571 Title: After login, gcr-prompter pops up several times in a row, never accepting my passwords Status in “gcr” package in Ubuntu: Confirmed Bug description: The dialog doesn't accept any of my passwords, so I have to cancel it 4 times in a row. I haven't noticed anything not working, and nothing asks for the password ever again. Also, the dialog isn't very clear on *which* password it's asking for. It just lists my email address -- which I don't have configured as an "online account" in Ubuntu. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: gcr 3.12.2-1 ProcVersionSignature: Ubuntu 3.16.0-18.25-generic 3.16.3 Uname: Linux 3.16.0-18-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Thu Oct 2 08:31:13 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2013-11-13 (322 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: gcr UpgradeStatus: Upgraded to utopic on 2014-09-16 (15 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gcr/+bug/1376571/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1378438] Re: Printer dialog stuck on "Getting printer information..."
** Changed in: cups (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1378438 Title: Printer dialog stuck on "Getting printer information..." Status in “cups” package in Ubuntu: Confirmed Bug description: In GTK+3/gnome-3 apps (eg evince), when I select my network-discovered printer, the "Status" field changes to "Getting printer information..." and the mouse cursor goes into spinning icon, and the Print button stays disabled, so I cannot print. In Firefox, the status tells me the printer is low on toner, but allows me to print. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: cups 1.7.5-3ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-18.25-generic 3.16.3 Uname: Linux 3.16.0-18-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CupsErrorLog: E [01/Oct/2014:13:52:31 -0700] systemd_checkin: Unable to get local address - Permission denied E [02/Oct/2014:08:11:27 -0700] systemd_checkin: Unable to get local address - Permission denied E [03/Oct/2014:08:02:08 -0700] systemd_checkin: Unable to get local address - Permission denied E [03/Oct/2014:08:11:49 -0700] systemd_checkin: Unable to get local address - Permission denied E [03/Oct/2014:08:22:30 -0700] systemd_checkin: Unable to get local address - Permission denied CurrentDesktop: GNOME Date: Tue Oct 7 09:29:43 2014 InstallationDate: Installed on 2014-02-24 (224 days ago) InstallationMedia: Ubuntu-GNOME 14.04 "Trusty Tahr" - Alpha amd64 (20140218) Lpstat: Error: command ['lpstat', '-v'] failed with exit code 1: lpstat: No destinations added. MachineType: Apple Inc. MacBookPro11,3 Papersize: letter ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-18-generic.efi.signed root=UUID=135fd833-3282-4f3b-8802-0a27ec2765b9 ro quiet splash init=/lib/systemd/systemd vt.handoff=7 SourcePackage: cups UpgradeStatus: Upgraded to utopic on 2014-08-17 (50 days ago) dmi.bios.date: 10/18/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP112.88Z.0138.B02.1310181745 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-2BD1B31983FE1663 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro11,3 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-2BD1B31983FE1663 dmi.modalias: dmi:bvnAppleInc.:bvrMBP112.88Z.0138.B02.1310181745:bd10/18/2013:svnAppleInc.:pnMacBookPro11,3:pvr1.0:rvnAppleInc.:rnMac-2BD1B31983FE1663:rvrMacBookPro11,3:cvnAppleInc.:ct10:cvrMac-2BD1B31983FE1663: dmi.product.name: MacBookPro11,3 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1378438/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1318103] Re: Error importing Python module pocketsphinx
** Changed in: pocketsphinx (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pocketsphinx in Ubuntu. https://bugs.launchpad.net/bugs/1318103 Title: Error importing Python module pocketsphinx Status in “pocketsphinx” package in Ubuntu: Confirmed Bug description: Pretty much stock standard Ubuntu 14.04 AMD64 with no manually compiled software and no manually installed python modules. $ python Python 2.7.6 (default, Mar 22 2014, 22:59:56) [GCC 4.8.2] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pocketsphinx Traceback (most recent call last): File "", line 1, in File "sphinxbase.pxd", line 150, in init pocketsphinx (pocketsphinx.c:7935) ValueError: PyCapsule_GetPointer called with invalid PyCapsule object >>> To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pocketsphinx/+bug/1318103/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1321204] Re: upstart (session) consumes almost 3GB of memory after 24 hours of uptime
** Changed in: upstart (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upstart in Ubuntu. https://bugs.launchpad.net/bugs/1321204 Title: upstart (session) consumes almost 3GB of memory after 24 hours of uptime Status in “upstart” package in Ubuntu: Confirmed Bug description: Running utopic with the ubuntu-desktop-next metapackage installed I see that media-hub-server is crashing many times per second (bug 1321203). Whatever is actually causing that the session upstart daemon now consumes about 3GB of memory after running like that for about one day. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: upstart 1.12.1-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.2-0ubuntu4 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 20 11:12:26 2014 InstallationDate: Installed on 2014-01-15 (124 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140115) SourcePackage: upstart UpgradeStatus: No upgrade log present (probably fresh install) UpstartBugCategory: Session UpstartRunningSessionCount: 1 UpstartRunningSessionVersion: init (upstart 1.12.1) UpstartRunningSystemVersion: init (upstart 1.12.1) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1321204/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1325698] Re: package util-linux 2.20.1-5.1ubuntu20 failed to install/upgrade: subprocess new pre-installation script returned error exit status 1
** Changed in: util-linux (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1325698 Title: package util-linux 2.20.1-5.1ubuntu20 failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 Status in “util-linux” package in Ubuntu: Confirmed Bug description: i don't have any details ProblemType: Package DistroRelease: Ubuntu 14.10 Package: util-linux 2.20.1-5.1ubuntu20 ProcVersionSignature: Ubuntu 3.15.0-4.9-generic 3.15.0-rc7 Uname: Linux 3.15.0-4-generic x86_64 ApportVersion: 2.14.3-0ubuntu1 Architecture: amd64 Date: Mon Jun 2 22:23:47 2014 DuplicateSignature: package:util-linux:2.20.1-5.1ubuntu20:subprocess new pre-installation script returned error exit status 1 ErrorMessage: subprocess new pre-installation script returned error exit status 1 InstallationDate: Installed on 2011-09-02 (1004 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) SourcePackage: util-linux Title: package util-linux 2.20.1-5.1ubuntu20 failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 UpgradeStatus: Upgraded to utopic on 2014-05-27 (6 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1325698/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1322199] Re: autopilot cannot fully introspect Qt applications
** Changed in: autopilot-qt Status: New => Confirmed ** Changed in: autopilot-qt (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to autopilot-qt in Ubuntu. https://bugs.launchpad.net/bugs/1322199 Title: autopilot cannot fully introspect Qt applications Status in Autopilot Qt support: Confirmed Status in “autopilot-qt” package in Ubuntu: Confirmed Bug description: Currently, for Qt apps, autopilot Qt introspection library is not taking into account non-QObject objects. Some widgets store visible elements in non-QObect data structures and are not visible from autopilot even if they are visible on the screen. This is for example the case for the content of QTableWidget, QListWidget, QTreeWidget etc. These objects store data in QTableWidgetItem, QListWidgetItem and QTreeWidgetItem respectively. These data structures do not inherit QObject. Autopilot should be improved to handle non-Qobject type datatypes for any UI element. To reproduce build the examples from the package qtbase5-examples and try to introspect applications in examples/widgets/ that contains any of the widget mentioned above e.g findfiles or spreadsheet. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: libautopilot-qt 1.4+14.04.20140312-0ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.2-0ubuntu4 Architecture: amd64 CurrentDesktop: Unity Date: Thu May 22 16:02:37 2014 InstallationDate: Installed on 2013-09-03 (260 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130902) SourcePackage: autopilot-qt UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/autopilot-qt/+bug/1322199/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1394711] Re: [HDA-Intel - HDA ATI SB, playback] No sound at all with built in display speakers
Raymond, I spent most of the day today (Sunday) trying to see if I could make any progress toward making the combined digital audio over the DVI to HDMI or HDMI to HDMI issues I am having any better(e.g. no "System Ready" sound without disabling the onboard sound in the bios and loss of the first 1 to 2 seconds of audio when output is initiated) and I am sad to say I made little to no progress. I made multiple attempts to force HDMI to be default using methods I found that worked for others with no progress. I also read a butt load of ALSA and Pulseaudio tips, tricks and bug reports as well as design documentation from ALSA. I figured if I could get the HDMI digital sound on rhe Video card working properly I would not need the analog as default for anything other than the inputs (non-linear video editing and such). I also wanted to try the fglrx or fglrx-updates driver but there is a problem with dependencies and Wine that prevents installing the driver if Wine is installed. A few issues with HDMI were solved by using the fglrx proprietary driver so I thought I would give it a try until I ran into the dependency problem. About the only thing I accomplished today was to find out that even if the alc892 chip is disabled on the motherbord to force the HDMI to the default (e.g. "0") entry when the alc892 chip is re-enabled the sound stays on HDMI at least from the "System Ready" sound standpoint. I checked the /proc/ asound card entries and the alc892 was listed at card "0" so I am not sure how the "System Ready" sound is still being output via the HDMI output. Other sounds played by the sox "play" command seem to be coming out at the analog "green" output despite the desktop being set to HDMI in the System Settings Sound dialog(AARRGGHH). Oh well at least I am learning a bit about the linux sound systems(lol). I will spend the rest of the evening backing up this system in case we need to do anything nasty that might take it down and will make a new up to date respin on my "build server" in case I need to reinstall the OS at some point(e.g. we will be able to do destuctive testing if needed). Thanks again. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1394711 Title: [HDA-Intel - HDA ATI SB, playback] No sound at all with built in display speakers Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: Problem Description: No sound at monitors built in speakers after fresh install of Utopic 14.10 Unity Desktop. Details: After installing Ubuntu 14.10 I had no sound at all from the speakers in my monitor. After troubleshooting I determined that the output from the sound system at the 'green' connector on the motherboard was fine but was not being delivered to the monitors speakers. I then replaced the audio cable from the motherboard to the monitor which did not help. I assumed that the analog input of the monitor had gone bad and removed a HDMI cable from my television and tried using it from the Video Card to the monitor and the sound in the monitor speakers worked(e.g. HDMI with combined Video and Audio signal). I assumed that the analog input in the monitor had gone bad and bought a new HDMI cable and used it from the Video card to the monitor. This did not work well however as I had to disable the audio chip on the motherboard to force the system to use the video card sound functionality to get the "system ready" sound to work. There was also a large latency when sending the sound signal through the video card to the monitor causing the "system ready" sound and "desktop notifications" to be cut off or not output at all. A short time after this I installed the same Utopic 14.10 Unity Desktop onto another computer with a similar monitor and had the same result (no sound through the monitor speakers) and discovered the real cause of the problem. The cause of the problem became appearant on the second install when the "system ready" sound was played but was cut off after a second or so. After this no more sound at all was output to the monitors speakers. For some reason in Utopic 14.10 the sound input in the monitor is being coupled to the video input making it impossible to use the HDMI input for video and the monitors analog input for sound. The audio input is "tracking" the video input in the monitor and the audio input is switching from the analog input to the HDMI input if a HDMI video cable is being used. This lead me to the conclusion that code is switching the analog input in the monitor to the HDMI audio input based on HDMI video being used and this was proven by the fact that a VGA (analog) video cable and analog audio cable/input works fine as well as a combined HDMI video/audio cable working (not quite fine but working) and to
[Touch-packages] [Bug 1359350] Re: window resize handle is now too far below window, windows become unresizable
My windows are now completely unresizeable in 14.10 with Ambiance/Radiance, so I'm reluctantly switching to Adwaita. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity in Ubuntu. https://bugs.launchpad.net/bugs/1359350 Title: window resize handle is now too far below window, windows become unresizable Status in Themes for Ubuntu: Triaged Status in Unity: Triaged Status in “unity” package in Ubuntu: Triaged Bug description: When I move my cursor to the bottom right corner of any window, the cursor changes to the "resizing handle" and I can resize the window. But, between 14.02 LTS and 14.04 LTS, then indicator appears farther down. Now, the indicator changes a few pixels below the outside edge of the window. What this means is that when I window's bottom edge is flush with the bottom of my screen, I am COMPLETELY UNABLE to resize the window. It is a bit annoying. :-) The distance from the bottom corner to show the resize indicator used to be rather small. It can be frustratingly hard to hit. But now, with these windows, it is completely impossible. This behavior has noticeably changed between 14.02 LTS and 14.04 LTS. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.2.2+14.04.20140714-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.3 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CurrentDesktop: Unity Date: Wed Aug 20 11:51:12 2014 InstallationDate: Installed on 2014-01-31 (201 days ago) InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64 (20130820.1) SourcePackage: unity UpgradeStatus: Upgraded to trusty on 2014-08-14 (6 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-themes/+bug/1359350/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp