[Touch-packages] [Bug 1574324] Re: pulseaudio crashes when connecting to bluetooth headphones
I believe that I may be encountering the same issue with my Plantronics BackBeat Go 2 (PLT_BBTGO2) bluetooth headphones. They connect and then disconnect about 1 to 2 seconds later. I am using a Broadcom BCM20702A0 bluetooth dongle. Please let me know what info I can provide that would confirm that I am encountering the same problem, as well as what logs are required to help in debugging this. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1574324 Title: pulseaudio crashes when connecting to bluetooth headphones Status in pulseaudio package in Ubuntu: Confirmed Bug description: When I attempt to connect my Jaybird Bluebuds X to Ubuntu 16.04 pulseaudio crashes, this does *NOT* happen with a Jambox which leads me to believe it's an intermittent problem with some hardware. This did not happen on Ubuntu 15.10 (which was an upgrade of 15.04). Ubuntu Release: Description: Ubuntu 16.04 LTS Release: 16.04 Pulseaudio Version: pulseaudio: Installed: 1:8.0-0ubuntu3 Candidate: 1:8.0-0ubuntu3 Version table: *** 1:8.0-0ubuntu3 500 500 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 Packages 100 /var/lib/dpkg/status Device info: [bluetooth]# info 44:5E:F3:B4:07:29 Device 44:5E:F3:B4:07:29 Name: BlueBuds X Alias: BlueBuds X Class: 0x240404 Icon: audio-card Paired: yes Trusted: yes Blocked: no Connected: no LegacyPairing: no UUID: Headset (1108--1000-8000-00805f9b34fb) UUID: Audio Sink(110b--1000-8000-00805f9b34fb) UUID: A/V Remote Control Target (110c--1000-8000-00805f9b34fb) UUID: A/V Remote Control(110e--1000-8000-00805f9b34fb) UUID: Handsfree (111e--1000-8000-00805f9b34fb) UUID: Unknown (80ff--1000-8000-00805f9b34fb) I have also attached a debug dump of Pulseaudio when attempting to connect to the headphones. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1574324/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1588533] Re: Mobile Data Network not working after screen is off for more then 2 min
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: indicator-network (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1588533 Title: Mobile Data Network not working after screen is off for more then 2 min Status in Canonical System Image: Incomplete Status in indicator-network package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: Confirmed Status in ofono package in Ubuntu: Confirmed Bug description: With OTA-11 the Mobile Network 3G and H do not come back into working mode after MX4 comes back from turning off the screen. Example: I reboot the MX4 and when it powers up all is working I get WiFi and Mobile Network 3G working great. I press the button to turn off the screen and leave it off for 2 or more minutes, when I turn it back on and unlock the device the Data network is not working. I can make calls and SMS but MMS and Data has no connection, at this point i can toggle the Data switch in the mobile configuration or put the phone into airplane mode and back into active and it works until next time. Thank You To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1588533/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1588533] Re: Mobile Data Network not working after screen is off for more then 2 min
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: network-manager (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1588533 Title: Mobile Data Network not working after screen is off for more then 2 min Status in Canonical System Image: Incomplete Status in indicator-network package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: Confirmed Status in ofono package in Ubuntu: Confirmed Bug description: With OTA-11 the Mobile Network 3G and H do not come back into working mode after MX4 comes back from turning off the screen. Example: I reboot the MX4 and when it powers up all is working I get WiFi and Mobile Network 3G working great. I press the button to turn off the screen and leave it off for 2 or more minutes, when I turn it back on and unlock the device the Data network is not working. I can make calls and SMS but MMS and Data has no connection, at this point i can toggle the Data switch in the mobile configuration or put the phone into airplane mode and back into active and it works until next time. Thank You To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1588533/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1588533] Re: Mobile Data Network not working after screen is off for more then 2 min
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ofono (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1588533 Title: Mobile Data Network not working after screen is off for more then 2 min Status in Canonical System Image: Incomplete Status in indicator-network package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: Confirmed Status in ofono package in Ubuntu: Confirmed Bug description: With OTA-11 the Mobile Network 3G and H do not come back into working mode after MX4 comes back from turning off the screen. Example: I reboot the MX4 and when it powers up all is working I get WiFi and Mobile Network 3G working great. I press the button to turn off the screen and leave it off for 2 or more minutes, when I turn it back on and unlock the device the Data network is not working. I can make calls and SMS but MMS and Data has no connection, at this point i can toggle the Data switch in the mobile configuration or put the phone into airplane mode and back into active and it works until next time. Thank You To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1588533/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595348] Re: Web browser dissapears too often
This page makes the browser die every time. 1. Go to https://oneplus.net/uk/3 2. Start to scroll down The browser will quit. I have done this 6 times out of 6.. There are no new crash dumps submitted automatically -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1595348 Title: Web browser dissapears too often Status in Canonical System Image: New Status in webbrowser-app package in Ubuntu: New Bug description: M10 tablet.. Ever since upgrading to OTA11 the web browser has become very annoying. If I have, say, 3 tabs on and close one, the browser often dissapears.. I restart it from the apps page and it restarts with all the original tabs, including thecone I tried to close.. I can then closecit again, usually without furthervincident. Or I might open the bookmarks and try to open a new tab, and the browser vanishes. Or, very occasionally I click on a search engine result and 'poof' she is gone! Anyone care to nominate a suitable log file? To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1595348/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1588475] Re: Pull latest binutils POWER9 support commit that adds support for 3 new instructions
the POWER9 support was just updated for the trunk, however doesn't apply cleanly on the 2.26 branch. Please update. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1588475 Title: Pull latest binutils POWER9 support commit that adds support for 3 new instructions Status in binutils package in Ubuntu: New Status in binutils source package in Xenial: New Bug description: Two new ISA 3.0 RFCs have been created that add 3 new instructions that will be present in POWER9. Binutils support for these new instructions have been committed to the binutils trunk and 2.26 release branches with the commits below. We would like this change to be picked up for the next release/update. binutils trunk: commit 19dfcc89e8d94526f011242041b700ede8834996 Author: Peter BergnerDate: Thu May 26 19:06:51 2016 -0500 Add support for new POWER ISA 3.0 instructions. opcodes/ * ppc-opc.c (CY): New define. Document it. (powerpc_opcodes) : New mnemonics. gas/ * testsuite/gas/ppc/altivec3.d : Add test. * testsuite/gas/ppc/altivec3.s: Likewise. * testsuite/gas/ppc/power9.d : Add tests. * testsuite/gas/ppc/power9.s: Likewise. binutils 2.26: commit 8bfb4f2639cc2a4b5bc6862adbdd3e948e61ace2 Author: Peter Bergner Date: Wed Jun 1 09:48:03 2016 -0500 Add support for new POWER ISA 3.0 instructions. opcodes/ Backport from master 2016-05-26 Peter Bergner * ppc-opc.c (CY): New define. Document it. (powerpc_opcodes) : New mnemonics. gas/ Backport from master 2016-05-26 Peter Bergner * testsuite/gas/ppc/altivec3.d : Add test. * testsuite/gas/ppc/altivec3.s: Likewise. * testsuite/gas/ppc/power9.d : Add tests. * testsuite/gas/ppc/power9.s: Likewise. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/1588475/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595390] [NEW] package libc6:i386 2.19-0ubuntu6.9 failed to install/upgrade: subprocess installed post-installation script was killed by signal (Aborted), core dumped
Public bug reported: NA ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libc6:i386 2.19-0ubuntu6.9 ProcVersionSignature: Ubuntu 4.2.0-38.45~14.04.1-generic 4.2.8-ckt10 Uname: Linux 4.2.0-38-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.21 Architecture: amd64 Date: Thu Jun 23 09:24:01 2016 Dependencies: gcc-4.9-base 4.9.3-0ubuntu4 libc6 2.19-0ubuntu6.9 libgcc1 1:4.9.3-0ubuntu4 multiarch-support 2.19-0ubuntu6.9 DuplicateSignature: package:libc6:i386:2.19-0ubuntu6.9:subprocess installed post-installation script was killed by signal (Aborted), core dumped ErrorMessage: subprocess installed post-installation script was killed by signal (Aborted), core dumped InstallationDate: Installed on 2016-06-23 (0 days ago) InstallationMedia: Ubuntu 14.04.4 LTS "Trusty Tahr" - Release amd64 (20160217.1) PackageArchitecture: i386 RelatedPackageVersions: dpkg 1.17.5ubuntu5.6 apt 1.0.1ubuntu2.14 SourcePackage: eglibc Title: package libc6:i386 2.19-0ubuntu6.9 failed to install/upgrade: subprocess installed post-installation script was killed by signal (Aborted), core dumped UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: eglibc (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 need-duplicate-check trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to eglibc in Ubuntu. https://bugs.launchpad.net/bugs/1595390 Title: package libc6:i386 2.19-0ubuntu6.9 failed to install/upgrade: subprocess installed post-installation script was killed by signal (Aborted), core dumped Status in eglibc package in Ubuntu: New Bug description: NA ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libc6:i386 2.19-0ubuntu6.9 ProcVersionSignature: Ubuntu 4.2.0-38.45~14.04.1-generic 4.2.8-ckt10 Uname: Linux 4.2.0-38-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.21 Architecture: amd64 Date: Thu Jun 23 09:24:01 2016 Dependencies: gcc-4.9-base 4.9.3-0ubuntu4 libc6 2.19-0ubuntu6.9 libgcc1 1:4.9.3-0ubuntu4 multiarch-support 2.19-0ubuntu6.9 DuplicateSignature: package:libc6:i386:2.19-0ubuntu6.9:subprocess installed post-installation script was killed by signal (Aborted), core dumped ErrorMessage: subprocess installed post-installation script was killed by signal (Aborted), core dumped InstallationDate: Installed on 2016-06-23 (0 days ago) InstallationMedia: Ubuntu 14.04.4 LTS "Trusty Tahr" - Release amd64 (20160217.1) PackageArchitecture: i386 RelatedPackageVersions: dpkg 1.17.5ubuntu5.6 apt 1.0.1ubuntu2.14 SourcePackage: eglibc Title: package libc6:i386 2.19-0ubuntu6.9 failed to install/upgrade: subprocess installed post-installation script was killed by signal (Aborted), core dumped UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/1595390/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1561278] Re: internal sound card not detected HP X2
yes, I still also have the issue. Thanks -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1561278 Title: internal sound card not detected HP X2 Status in alsa-driver package in Ubuntu: In Progress Bug description: HP Pavilion X2 - No sound card detected. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.4.0-15.31-generic 4.4.6 Uname: Linux 4.4.0-15-generic x86_64 ApportVersion: 2.20-0ubuntu3 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: Unity Date: Wed Mar 23 18:18:32 2016 InstallationDate: Installed on 2016-03-18 (5 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160307) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/11/2015 dmi.bios.vendor: Insyde dmi.bios.version: F.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 813E dmi.board.vendor: HP dmi.board.version: 34.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.04:bd09/11/2015:svnHP:pnHPPavilionx2Detachable:pvrType1ProductConfigId:rvnHP:rn813E:rvr34.10:cvnHP:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion x2 Detachable dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1561278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1480654] Re: [regression] Input focus delay after switching app back into focus since OTA5
I'm getting (b) (https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1480654/comments/26) as well on the Nexus 4 (Mako) particularly in the browser, which also leads to the fast scrolling bug: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1584965 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1480654 Title: [regression] Input focus delay after switching app back into focus since OTA5 Status in Canonical System Image: Confirmed Status in Mir: Fix Released Status in mir package in Ubuntu: Fix Released Status in qtmir package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: i am not sure if it started with OTA4 or OTA5 but since one of the recent OTA upgrades my arale takes between half a second and one second before an app takes input again when one switches it from background back into focus. i'm talking about apps that were only sigstopped, not OOM killed here (i.e. no restart involved, just sigcont). this used to be instant before and gives a weird feeling of sluggishness. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1480654/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1561278] Re: internal sound card not detected HP X2
Changing back to in progress because I think the report is complete and the issue still exists. ** Changed in: alsa-driver (Ubuntu) Status: Incomplete => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1561278 Title: internal sound card not detected HP X2 Status in alsa-driver package in Ubuntu: In Progress Bug description: HP Pavilion X2 - No sound card detected. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.4.0-15.31-generic 4.4.6 Uname: Linux 4.4.0-15-generic x86_64 ApportVersion: 2.20-0ubuntu3 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: Unity Date: Wed Mar 23 18:18:32 2016 InstallationDate: Installed on 2016-03-18 (5 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160307) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/11/2015 dmi.bios.vendor: Insyde dmi.bios.version: F.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 813E dmi.board.vendor: HP dmi.board.version: 34.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.04:bd09/11/2015:svnHP:pnHPPavilionx2Detachable:pvrType1ProductConfigId:rvnHP:rn813E:rvr34.10:cvnHP:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion x2 Detachable dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1561278/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1565941] Re: Dual Panel view: Updating an image on a contact changes on details panel but not in the contact list
Seems fixed in silo 46. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to address-book-app in Ubuntu. https://bugs.launchpad.net/bugs/1565941 Title: Dual Panel view: Updating an image on a contact changes on details panel but not in the contact list Status in Canonical System Image: Confirmed Status in address-book-app package in Ubuntu: In Progress Bug description: STEPS: Pre-Requisite: have some images in the gallery app 1. Open addressbook On a tablet in dual panel mode 2. Create a new contact 3. Add an image from gallery 4. Hit save 5. Close the app 6. Open the app 7. Hit edit 8. Tap on the image 9. Select camera and take a photo 10. Add that image to the contact 11. save the contact edits EXPECTED: I expect the image in the contacts list to match the image in on the edit page ACTUAL: The image in the contact list panel is different to the image in the details panel see attached screenshot To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1565941/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1583014] Re: can't import contacts from google from messaging-app when no contacts exist
Seems to be fixed in silo 46. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to address-book-app in Ubuntu. https://bugs.launchpad.net/bugs/1583014 Title: can't import contacts from google from messaging-app when no contacts exist Status in Canonical System Image: Confirmed Status in address-book-app package in Ubuntu: Confirmed Status in messaging-app package in Ubuntu: Confirmed Status in online-accounts-api package in Ubuntu: New Bug description: Trying to send an sms, I click on the "person" icon to choose a contact. I have none, and the options are "+ Create new", "Import contacts from Google" and " Import contacts from SIM card". If I click the google option it does nothing (shows loading and goes back to the same screen showing the options) I guess it should take me to the "add google account" config somehow instead? Original reporter: Julia Palandri To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1583014/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1592422] Re: Contact's field labels don't show up
Seems fixed in silo 46. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to address-book-app in Ubuntu. https://bugs.launchpad.net/bugs/1592422 Title: Contact's field labels don't show up Status in Canonical System Image: Confirmed Status in address-book-app package in Ubuntu: In Progress Bug description: Test case. - Open messaging app. - Swipe up to create a new message. - Tap on the Contact icon. - Tap to Create a new contact. Expected result. - Contact's field labels can be read ("Name", "Last name"). Actual result. - Contact's field labels cannot be read (probably have the same color as background). In OTA11 they can be read. current build number: 350 device name: arale channel: ubuntu-touch/rc-proposed/meizu.en To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1592422/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1544477] Re: No sound notification for new SMS (Ubuntu Touch)
I never noticed any correlation between memory usage and SMS notifications dying, but you never know. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1544477 Title: No sound notification for new SMS (Ubuntu Touch) Status in Canonical System Image: Confirmed Status in media-hub package in Ubuntu: Invalid Status in pulseaudio package in Ubuntu: Confirmed Bug description: I noticed for last 2-3 days there is no sound notification for a new SMS, but there's a blinking green LED notification. Also in the indicator menu the envelope icon turns green and the new SMS is listed as usual. Things are working alright for Telegram, Gmail etc. (sound+LED+indicator menu). Device: bq Aquaris E5 HD, Ubuntu 15.04 (OTA-9) UPDATE: Screenshots get silent too. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1544477/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1519120] Re: Xenial: VLAN interfaces don't work until after a reboot
** Changed in: network-manager (Ubuntu) Importance: Undecided => High ** Changed in: network-manager (Ubuntu) Importance: High => Low ** Tags added: packaging -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1519120 Title: Xenial: VLAN interfaces don't work until after a reboot Status in network-manager package in Ubuntu: Confirmed Status in vlan package in Ubuntu: Invalid Bug description: I tried to use the network manager UI to define a VLAN interface, and nothing happened. There are a few bugs here: (1) When creating a VLAN interface through the UI, the "vlan interface name" must be filled in. This should just default to ., rather than being a required field. (I typed in "vlan100" to get the "Save" button to activate.) (2) After creating my VLAN interface, nothing happened. No new interface appeared. I then realized that I had not installed the "vlan" package, and assumed that NetworkManager therefore could not complete configuration of the interface. (3) After installing the 'vlan' package (and then telling NetworkManager to disconnect and reconnect my Ethernet interface from the UI, just for good measure), still no VLAN interfaces were present on my system. I also tried editing the VLAN interface in the UI, and specifying "enp4s0f1.100", but still no VLAN interface came online. # apt-cache policy network-manager network-manager: Installed: 1.0.4-0ubuntu6 Candidate: 1.0.4-0ubuntu6 Version table: *** 1.0.4-0ubuntu6 0 500 http://172.16.42.88/ubuntu/ xenial/main amd64 Packages 100 /var/lib/dpkg/status # apt-cache policy vlan vlan: Installed: 1.9-3.2ubuntu1 Candidate: 1.9-3.2ubuntu1 Version table: *** 1.9-3.2ubuntu1 0 500 http://172.16.42.88/ubuntu/ xenial/main amd64 Packages 100 /var/lib/dpkg/status To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1519120/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595348] Re: Web browser dissapears too often
The entirety of my crash reports does not contain anything like enough incidents for thenumber of times the browser vanishes https://errors.ubuntu.com/user/283f8b8bdd615ba7aa27a0c29ab9114ca6436a0f2b5bf6ba7899f6304e2e61f8544c1475bbfb7a632c8ed01385e993d9a446a2aac1f648334a98eb266356e4e2 I am seeing around 30 incidents a day ** Attachment added: "screenshot20160623_004819648.png" https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1595348/+attachment/4688782/+files/screenshot20160623_004819648.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1595348 Title: Web browser dissapears too often Status in Canonical System Image: New Status in webbrowser-app package in Ubuntu: New Bug description: M10 tablet.. Ever since upgrading to OTA11 the web browser has become very annoying. If I have, say, 3 tabs on and close one, the browser often dissapears.. I restart it from the apps page and it restarts with all the original tabs, including thecone I tried to close.. I can then closecit again, usually without furthervincident. Or I might open the bookmarks and try to open a new tab, and the browser vanishes. Or, very occasionally I click on a search engine result and 'poof' she is gone! Anyone care to nominate a suitable log file? To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1595348/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595348] [NEW] Web browser dissapears too often
Public bug reported: M10 tablet.. Ever since upgrading to OTA11 the web browser has become very annoying. If I have, say, 3 tabs on and close one, the browser often dissapears.. I restart it from the apps page and it restarts with all the original tabs, including thecone I tried to close.. I can then closecit again, usually without furthervincident. Or I might open the bookmarks and try to open a new tab, and the browser vanishes. Or, very occasionally I click on a search engine result and 'poof' she is gone! Anyone care to nominate a suitable log file? ** Affects: canonical-devices-system-image Importance: Undecided Status: New ** Affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New ** Also affects: webbrowser-app (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1595348 Title: Web browser dissapears too often Status in Canonical System Image: New Status in webbrowser-app package in Ubuntu: New Bug description: M10 tablet.. Ever since upgrading to OTA11 the web browser has become very annoying. If I have, say, 3 tabs on and close one, the browser often dissapears.. I restart it from the apps page and it restarts with all the original tabs, including thecone I tried to close.. I can then closecit again, usually without furthervincident. Or I might open the bookmarks and try to open a new tab, and the browser vanishes. Or, very occasionally I click on a search engine result and 'poof' she is gone! Anyone care to nominate a suitable log file? To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1595348/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595348] Re: Web browser dissapears too often
** Attachment added: "unity8.log" https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1595348/+attachment/4688781/+files/unity8.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1595348 Title: Web browser dissapears too often Status in Canonical System Image: New Status in webbrowser-app package in Ubuntu: New Bug description: M10 tablet.. Ever since upgrading to OTA11 the web browser has become very annoying. If I have, say, 3 tabs on and close one, the browser often dissapears.. I restart it from the apps page and it restarts with all the original tabs, including thecone I tried to close.. I can then closecit again, usually without furthervincident. Or I might open the bookmarks and try to open a new tab, and the browser vanishes. Or, very occasionally I click on a search engine result and 'poof' she is gone! Anyone care to nominate a suitable log file? To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1595348/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595348] Re: Web browser dissapears too often
https://errors.ubuntu.com/oops/c3ccc770-3808-11e6-b293-fa163ef911dc might help ?field.comment=https://errors.ubuntu.com/oops/c3ccc770-3808-11e6-b293-fa163ef911dc might help ** Attachment added: "unity8.log.1.gz" https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1595348/+attachment/4688780/+files/unity8.log.1.gz -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1595348 Title: Web browser dissapears too often Status in Canonical System Image: New Status in webbrowser-app package in Ubuntu: New Bug description: M10 tablet.. Ever since upgrading to OTA11 the web browser has become very annoying. If I have, say, 3 tabs on and close one, the browser often dissapears.. I restart it from the apps page and it restarts with all the original tabs, including thecone I tried to close.. I can then closecit again, usually without furthervincident. Or I might open the bookmarks and try to open a new tab, and the browser vanishes. Or, very occasionally I click on a search engine result and 'poof' she is gone! Anyone care to nominate a suitable log file? To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1595348/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1580256] Re: Wifi connections not available after system startup
*** This bug is a duplicate of bug 1574347 *** https://bugs.launchpad.net/bugs/1574347 Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: network-manager (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1580256 Title: Wifi connections not available after system startup Status in network-manager package in Ubuntu: Confirmed Bug description: After system startup, in some cases (it seems randomly), network-manager does not show any connections available (empty list of networks in systray icon menu). If i press "configure connections" button, connections editor shows two connections, but it is not possible to activate any of them. Connections are called as "wired connection 1" and "Wired connection 2". If i go to connection settings, i can see that one of them is configured to use my ethernet cable interface enp0s25 (i usually have no ethernet cable attached), and another is configured to use my wifi interface wlp4s0. So it seems that problem is that for some reason network-manager "thinks" that my wireless interface is wired, and so does not even try to connect to any wifi network. If I do sudo service network-manager restart, all becomes ok, network-manager immediately sees my wifi network and connects to it. But having to manual restart of service right after system startup indicates that something is very wrong. This is newly installed Kubuntu 16.04 with latest updates. What I tried to do: * edit NetworkManager.conf to set [ifupdown] managed = true. No changes in behaivour at all. * remove and install again network-manager package. For some time I thought that resolved the problem, but after few days it reproduced again. * plug ethernet cable, connect to wired network, unplug cable. No results. dmesg | grep wifi output: [3.693651] iwlwifi :04:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2 [3.706221] iwlwifi :04:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm [3.749453] iwlwifi :04:00.0: Detected Intel(R) Wireless N 7260, REV=0x144 [3.749526] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [3.749782] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [3.965973] iwlwifi :04:00.0 wlp4s0: renamed from wlan0 [4.329538] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [4.330033] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [4.535001] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [4.535266] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [ 122.272761] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [ 122.273048] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [ 122.470381] iwlwifi :04:00.0: L1 Enabled - LTR Enabled [ 122.470640] iwlwifi :04:00.0: L1 Enabled - LTR Enabled Please ask if you need me to attach any other logs. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.1.93-0ubuntu4 ProcVersionSignature: Ubuntu 4.4.0-22.39-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 Date: Tue May 10 21:23:27 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-04-30 (9 days ago) InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.1.1 dev wlp4s0 proto static metric 600 169.254.0.0/16 dev wlp4s0 scope link metric 1000 192.168.1.0/24 dev wlp4s0 proto kernel scope link src 192.168.1.107 metric 600 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=ru_RU.UTF-8 SHELL=/bin/bash SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2016-05-08T12:50:46.588618 nmcli-con: NAMEUUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT AUTOCONNECT-PRIORITY READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH tplink-portnov 1fdff901c-5deb-4104-ba4d-c555e4b81d7c 802-11-wireless 1462897338 Вт 10 май 2016 21:22:18 yes 0 no/org/freedesktop/NetworkManager/Settings/0 yes wlp4s0 activated /org/freedesktop/NetworkManager/ActiveConnection/0 Проводное соединение 1 08666419-d8c4-4c5f-911a-de123d44ec3a 802-3-ethernet 0 neveryes 0
[Touch-packages] [Bug 1593407] Re: Guest session cannot run snaps
I had a go at this by adding the following to the lightdm apparmor config: /snap/ r, /snap/** rmixk, But it wasn't able to mount the snaps. So there must be more config required. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1593407 Title: Guest session cannot run snaps Status in lightdm package in Ubuntu: Triaged Status in snapd package in Ubuntu: New Bug description: I'm using Ubuntu 16.04. The guest session cannot execute snaps, because of a permission error. The LightDM's guest session AppArmor profile is not allowing access to /snap and other needed files and folders. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1593407/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594791] Re: light dm screen resolution
Looks like a driver issue... ** Package changed: lightdm (Ubuntu) => xorg-server (Ubuntu) ** Changed in: xorg-server (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1594791 Title: light dm screen resolution Status in xorg-server package in Ubuntu: New Bug description: Part of the screen is not accessible, and the upper part is huge on the screen. Is lightdm activated? ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lightdm 1.10.6-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-57.77~14.04.1-generic 3.16.7-ckt20 Uname: Linux 3.16.0-57-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.19 Architecture: amd64 CurrentDesktop: Unity Date: Tue Jun 21 14:25:45 2016 InstallationDate: Installed on 2015-04-30 (418 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1594791/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1239151] Re: nmcli Segmentation fault (core dumped)
** This bug is no longer a duplicate of bug 1155139 nmcli crashed with SIGSEGV in show_device_info() -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1239151 Title: nmcli Segmentation fault (core dumped) Status in network-manager package in Ubuntu: Confirmed Bug description: command /usr/bin/nmcli dev list terminates unexpectedly with a error "Segmentation fault (core dumped)" @jupiter:~$ nmcli dev list GENERAL.DEVICE: ttyUSB1 GENERAL.TYPE: gsm GENERAL.VENDOR: Qualcomm Incorporated GENERAL.PRODUCT:HP un2420 Mobile Broadband Module GENERAL.DRIVER: qcserial . . . IP6.DNS[1]: fd00::c225:6ff:fe4e:1582 GENERAL.DEVICE: eth0 GENERAL.TYPE: 802-3-ethernet GENERAL.VENDOR: Intel Corporation GENERAL.PRODUCT:82577LM Gigabit Network Connection GENERAL.DRIVER: e1000e GENERAL.DRIVER-VERSION: 2.1.4-k GENERAL.FIRMWARE-VERSION: 0.12-3 GENERAL.HWADDR: 70:5A:B6:B1:E1:A4 GENERAL.STATE: 20 (unavailable) GENERAL.REASON: 2 (Device is now managed) GENERAL.UDI: /sys/devices/pci:00/:00:19.0/net/eth0 GENERAL.IP-IFACE: GENERAL.NM-MANAGED: yes GENERAL.AUTOCONNECT:yes GENERAL.FIRMWARE-MISSING: no GENERAL.CONNECTION: not connected CAPABILITIES.CARRIER-DETECT:yes CAPABILITIES.SPEED: unknown Segmentation fault (core dumped) @jupiter:~$ ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: network-manager 0.9.8.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 Date: Sat Oct 12 17:14:06 2013 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-05-08 (156 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) IpRoute: default via 10.10.10.1 dev wlan0 proto static 10.10.10.0/24 dev wlan0 proto kernel scope link src 10.10.10.100 metric 9 169.254.0.0/16 dev wlan0 scope link metric 1000 MarkForUpload: True NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATE DBUS-PATH ttyUSB1gsm disconnected /org/freedesktop/NetworkManager/Devices/2 wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.0connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1239151/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594814] Re: NetworkManager looking for signal strength in 'wlan0' instead of the apropriate 'wlxc46e1f1abe34"
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: network-manager (Ubuntu) Importance: Undecided => Low -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1594814 Title: NetworkManager looking for signal strength in 'wlan0' instead of the apropriate 'wlxc46e1f1abe34" Status in network-manager package in Ubuntu: New Bug description: I get this error in my log a lot: "Jun 21 15:04:00 basspistol NetworkManager[834]: [1466514240.9769] (wlan0): error getting signal strength: No such device" My wireless device (TP-Link 150Mbps Wireless N Nano USB Adapter) is getting a very funky name: "wlxc46e1f1abe34". It's not too much of a problem since the connection is established and working, but it renders the wifi-strength icon as if it was receiving maximum signal strength. Restarting the network-manager with: "sudo systemctl restart network- manager.service" solves the problem. Not sure if it is related, but i am also affected by this bug: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1589401 Even after upgrading to: network-manager-gnome:amd64 (1.2.0-0ubuntu0.16.04.1, 1.2.0-0ubuntu0.16.04.3) on 2016-06-19 Let me know if there is any complementary information i can provide. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.2.0-0ubuntu0.16.04.2 ProcVersionSignature: Ubuntu 4.4.0-24.43-lowlatency 4.4.10 Uname: Linux 4.4.0-24-lowlatency x86_64 NonfreeKernelModules: nvidia_uvm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: XFCE Date: Tue Jun 21 15:04:46 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-04-21 (60 days ago) InstallationMedia: Ubuntu-Studio 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 10.42.0.1 dev wlxc46e1f1abe34 proto static metric 600 10.42.0.0/24 dev wlxc46e1f1abe34 proto kernel scope link src 10.42.0.22 metric 600 169.254.0.0/16 dev wlxc46e1f1abe34 scope link metric 1000 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true RfKill: SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATEDBUS-PATH CONNECTION CON-UUID CON-PATH wlxc46e1f1abe34 wifi connected /org/freedesktop/NetworkManager/Devices/0 sakrecoer 1 7bfae379-b282-4335-8bfe-f1f55229ad51 /org/freedesktop/NetworkManager/ActiveConnection/0 enp3s0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/1 -- -- -- lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/2 -- -- -- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1594814/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1585589] Re: drop upstart-sysv
This bug was fixed in the package upstart - 1.13.2-0ubuntu26 --- upstart (1.13.2-0ubuntu26) yakkety; urgency=medium * Disable upstart-sysv package. (LP: #1585589) -- Martin PittWed, 22 Jun 2016 15:51:51 +0200 ** Changed in: upstart (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upstart in Ubuntu. https://bugs.launchpad.net/bugs/1585589 Title: drop upstart-sysv Status in upstart package in Ubuntu: Fix Released Bug description: I'm using Ubuntu 16.10 dev with init 1.33ubuntu2 and I'm noticing that it does now pre-depend on "systemd-sysv" instead of "systemd-sysv | upstart-sysv". Since init is essential and upstart-sysv conflicts with systemd-sysv this means it is not possible to install Upstart in a sane way anymore. In case Upstart is not supported anymore maybe all related packages should be removed from the yakkety repository then (since Upstart can't be installed anymore with apt for the reasons above) to avoid confusion. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1585589/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1593847] Re: Can't use Software Updater
update-manager is a better place for this report ** Package changed: xorg (Ubuntu) => update-manager (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1593847 Title: Can't use Software Updater Status in update-manager package in Ubuntu: New Bug description: I have a number of upgrades in the que. When I attempt a download I get the message: "Failed to download package files - check your internet connection" ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Fri Jun 17 15:21:06 2016 DistUpgraded: 2016-04-25 17:08:36,358 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu ExtraDebuggingInterest: No GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770/8760 / R7 250X] [1002:683d] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] R7770-PMD1GD5 [1462:2710] InstallationDate: Installed on 2015-01-27 (506 days ago) InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1) MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M. ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic root=UUID=b18b8663-e580-47f4-97f3-eb155776b141 ro plymouth:debug splash quiet drm.debug=0xe SourcePackage: xorg UpgradeStatus: Upgraded to xenial on 2016-04-25 (52 days ago) dmi.bios.date: 07/12/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F7 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z77-DS3H dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF7:bd07/12/2012:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ77-DS3H:rvrTobefilledbyO.E.M.:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1ubuntu0.16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Fri Jun 17 13:16:00 2016 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputHID 04b4:0033MOUSE, id 8 input USB Keyboard KEYBOARD, id 9 input USB Keyboard KEYBOARD, id 10 xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.18.3-1ubuntu2.2 xserver.video_driver: radeon To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/1593847/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595331] [NEW] [HP Compaq 6735s, Analog Devices AD1984A, Green Speaker, Internal] No sound at all
Public bug reported: After software update to latest version and pc restart no more sound. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: michael2010 F...m pulseaudio /dev/snd/controlC0: michael2010 F pulseaudio CurrentDesktop: Unity Date: Wed Jun 22 23:21:20 2016 InstallationDate: Installed on 2015-09-05 (291 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:SB failed Symptom_Card: Built-in Audio - HDA ATI SB Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: michael2010 F...m pulseaudio /dev/snd/controlC0: michael2010 F pulseaudio Symptom_Jack: Green Speaker, Internal Symptom_Type: No sound at all Title: [HP Compaq 6735s, Analog Devices AD1984A, Green Speaker, Internal] No sound at all UpgradeStatus: Upgraded to xenial on 2016-04-24 (59 days ago) dmi.bios.date: 10/02/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68GPP Ver. F.06 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 30E4 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 94.1C dmi.chassis.asset.tag: CNU842079D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68GPPVer.F.06:bd10/02/2008:svnHewlett-Packard:pnHPCompaq6735s:pvrF.06:rvnHewlett-Packard:rn30E4:rvrKBCVersion94.1C:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq 6735s dmi.product.version: F.06 dmi.sys.vendor: Hewlett-Packard ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1595331 Title: [HP Compaq 6735s, Analog Devices AD1984A, Green Speaker, Internal] No sound at all Status in alsa-driver package in Ubuntu: New Bug description: After software update to latest version and pc restart no more sound. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: michael2010 F...m pulseaudio /dev/snd/controlC0: michael2010 F pulseaudio CurrentDesktop: Unity Date: Wed Jun 22 23:21:20 2016 InstallationDate: Installed on 2015-09-05 (291 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:SB failed Symptom_Card: Built-in Audio - HDA ATI SB Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: michael2010 F...m pulseaudio /dev/snd/controlC0: michael2010 F pulseaudio Symptom_Jack: Green Speaker, Internal Symptom_Type: No sound at all Title: [HP Compaq 6735s, Analog Devices AD1984A, Green Speaker, Internal] No sound at all UpgradeStatus: Upgraded to xenial on 2016-04-24 (59 days ago) dmi.bios.date: 10/02/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68GPP Ver. F.06 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 30E4 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 94.1C dmi.chassis.asset.tag: CNU842079D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68GPPVer.F.06:bd10/02/2008:svnHewlett-Packard:pnHPCompaq6735s:pvrF.06:rvnHewlett-Packard:rn30E4:rvrKBCVersion94.1C:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq 6735s dmi.product.version: F.06 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1595331/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1577051] Re: aa-logprof fails with unknown mode "reweive"
-- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1577051 Title: aa-logprof fails with unknown mode "reweive" Status in AppArmor: Confirmed Status in apparmor package in Ubuntu: Confirmed Status in apparmor source package in Xenial: Confirmed Bug description: Ubuntu 16.04. Profiling apache tomcat. 1) aa-genprof on the catalina.sh script that is used to start and stop tomcat. 2) Start and stop tomcat. 3) Scan and save the profile. 4) aa-complain on the tomcat profile 5) Start tomcat again and this time also send a http request to tomcat. 6) Run aa-logprof which fails with this message Reading log entries from /var/log/syslog. Updating AppArmor profiles in /etc/apparmor.d. Traceback (most recent call last): File "/usr/lib/python3/dist-packages/apparmor/logparser.py", line 402, in read_log self.add_event_to_tree(event) File "/usr/lib/python3/dist-packages/apparmor/logparser.py", line 206, in add_event_to_tree e = self.parse_event_for_tree(e) File "/usr/lib/python3/dist-packages/apparmor/logparser.py", line 303, in parse_event_for_tree raise AppArmorException(_('Log contains unknown mode %s') % rmask) apparmor.common.AppArmorException: 'Log contains unknown mode reweive' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/sbin/aa-logprof", line 50, in apparmor.do_logprof_pass(logmark) File "/usr/lib/python3/dist-packages/apparmor/aa.py", line 2189, in do_logprof_pass log = log_reader.read_log(logmark) File "/usr/lib/python3/dist-packages/apparmor/logparser.py", line 407, in read_log raise AppArmorBug(ex_msg) # py3-only: from None apparmor.common.AppArmorBug: Log contains unknown mode reweive This error was caused by the log line: Apr 30 21:53:05 nova kernel: [24668.960760] audit: type=1400 audit(1462045985.636:2154): apparmor="ALLOWED" operation="file_perm" profile="/usr/local/apache-tomcat-8.0.33/bin/catalina.sh///usr/local/jdk1.8.0_92/bin/java" pid=12529 comm="java" laddr=:::127.0.0.1 lport=8080 faddr=:::127.0.0.1 fport=52308 family="inet6" sock_type="stream" protocol=6 requested_mask="receive" denied_mask="receive" An unexpected error occoured! For details, see /tmp/apparmor-bugreport-wj6gamog.txt Please consider reporting a bug at https://bugs.launchpad.net/apparmor/ and attach this file. To manage notifications about this bug go to: https://bugs.launchpad.net/apparmor/+bug/1577051/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595249] Re: "You have to press and hold the record icon" is truncated in german
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: messaging-app (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1595249 Title: "You have to press and hold the record icon" is truncated in german Status in messaging-app package in Ubuntu: Confirmed Bug description: "You have to press and hold the record icon" (Du musst das Aufnahmesymbol berühren und gedrückt halten) is truncated in german language (even in landscape mode). So nobody can read what to do with the microphone symbol. This happens to me on a bq 4.5 with OTA 11. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1595249/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1465331] Re: [scopes] should Dash rotate
Making the greeter rotate is on our roadmap. I don't think we need a bug report for it. There's a Trello card. It will be part of some larger rework of the greeter. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1465331 Title: [scopes] should Dash rotate Status in Canonical System Image: Fix Released Status in Ubuntu UX: Fix Committed Status in unity8 package in Ubuntu: Fix Released Bug description: Shell rotation has now been released. On the phone, it feels a little odd that dash doesn't rotate. Could we consider making dash into a rotating app ? -- UX Comment -- Orientation design: from portrait to landscape presentation can serve as a guide for the agreed design direction. (https://docs.google.com/presentation/d/14hMDaQDcGyBnMO7UYI76hfJRPbGME4tN5Wm70O3z0ds/edit#slide=id.ga333e0b9a_0_163 Specs will be posted/updated as soon as they are available. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1465331/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1496102] Re: Bluetooth connection breaks in a few seconds
This problem still happens with OTA11 on Meizu MX7. The car kit is a Carminat (TomTom) in a Renault Laguna. Using bluetoothctl I can see the connection is established (there is no problem with pairing as in other bug reports). However the connection is disconnected after about 2 seconds. In a very early version (can't remember which OTA) bluetooth actually did work but only after a reboot. What can I do to get this fixed in OTA 12? I can ssh into my phone while connecting etc, but I didn't see any error messages. I just disconnects. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1496102 Title: Bluetooth connection breaks in a few seconds Status in Canonical System Image: Confirmed Status in bluez package in Ubuntu: Confirmed Bug description: Tried to connect with my MX4 to an Android, then to a Lumia phone. Devices discover each other, they get "Connected", but in about 5-15 seconds they get "Disconnected" again. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1496102/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1579130] Re: need to support renaming of devices in container and on first boot
** Branch linked: lp:~smoser/ubuntu/xenial/cloud-init/pkg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1579130 Title: need to support renaming of devices in container and on first boot Status in cloud-init package in Ubuntu: Fix Released Status in systemd package in Ubuntu: Triaged Bug description: We're interested in supporting network configuration of cloud instances including lxc containers via maas/cloud-init yaml format. For Containers, the end goal is to do: $ lxc init xenial x1 $ ncpath=/var/lib/cloud/seed/nocloud-net/network-config $ sudo tee /var/lib/lxd/containers/x1/rootfs/$ncpath < into 'eth0'). That is implemented by check of /sys/devices/virtual/net/eth0/name_assign_type . Value of 4 means renamed. c.) systemd.link will not attempt to rename a device that does not have a driver. To see that run: udevadm test-builtin net_setup_link /sys/class/net/eth0 http://paste.ubuntu.com/16261974/ d.) on first boot of a cloud instance, the systemd.link files in the initramfs are either pristine or from the previous instance. The devices will leave the initramfs either named incorrectly or named with standard persistent naming and will have already been renamed. To force these systemd.link files to run in spite of 'b' on kvm guests or bare metal, we have found that unbind and rebind of the device will clear the state and rename would occur. that can be done as shown in https://bugs.launchpad.net/ubuntu/+source/cloud- init/+bug/1577844/comments/3 but since there is no 'driver' we cannot unbind and rebind veth devices. To do this right, we need to support: 1.) renaming on first boot with initramfs and with 'stale' initramfs 2.) renaming in lxc containers 3.) user updating whatever files or mechanism is used post first boot. For example, if the user wrote a 25-my-rules.link after first boot, a reboot should prefer their provided names to whatever were originally there. 4.) if cloud-init networking is disabled, the renaming should not occur. Related Bugs: * bug 1594546: no need to write systemd.link files ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: udev 229-4ubuntu4 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 Date: Fri May 6 15:42:52 2016 MachineType: LENOVO 33672B7 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=19ac97d5-6973-4193-9a09-2e6bbfa38262 ro quiet splash vt.handoff=7 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/18/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G8ET96WW (2.56 ) dmi.board.asset.tag: Not Available dmi.board.name: 33672B7 dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG8ET96WW(2.56):bd12/18/2013:svnLENOVO:pn33672B7:pvrThinkPadX131e:rvnLENOVO:rn33672B7:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 33672B7 dmi.product.version: ThinkPad X131e dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1579130/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594532] Re: Portrait mode is missing top
Refresh does not help. Only go to ether scope, switch back to landscape ad go back to apps scope (sometimes needs a refresh) ** Attachment added: "screenshot20160622_220305439.png" https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1594532/+attachment/4688742/+files/screenshot20160622_220305439.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1594532 Title: Portrait mode is missing top Status in unity-scope-click package in Ubuntu: New Status in unity8 package in Ubuntu: Incomplete Bug description: When I open the apps scope in portrait mode on my m10 tablet. The top of the scope is missing. Contacts, camera etc + top 2 or 3 lines with apps To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1594532/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1540240] Re: Automatic Header height adjustment should be optional
** Branch linked: lp:~tpeeters/ubuntu-ui-toolkit/apl-header-height -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1540240 Title: Automatic Header height adjustment should be optional Status in Ubuntu UX: Fix Committed Status in ubuntu-ui-toolkit package in Ubuntu: In Progress Bug description: I am currently developing a convergence capable CAD App and i recently switched the UI to use AdaptivePageLayout and the new headers. I have noticed that the header automatically resizes across columns to match the column with the greatest header height. This doesn't suit my particular application as I would like to maintain maximum screen space for the drawing canvas. I have attached some screenshots (early development - dont judge me!!) of what I am seeing. It would be super cool if you could include a flag or option to disable the header adjustment for any particular page or column. UX Fix: A flag will be included in the header component to disable header adjustments, allowing developers to have different header heights for convergence apps. Ideally for full screen applications the header should be set to hidden. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1540240/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595308] [NEW] Pressing "space" character on OSK with a validator can crash maliit
Public bug reported: 1) Save the code below [1] in a test.qml file 2) Run it on the phone with "qmlscene --desktop_file_hint=dialer-app test.qml" 3) Press the "space" character several times in a row 4) Eventually maliit crashes. I've attached a crash file from this below. current build number: 111 device name: turbo channel: ubuntu-touch/rc-proposed/meizu.en last update: 2016-06-22 12:52:32 version version: 111 version ubuntu: 20160622 version device: 20160617-82a5c0d version custom: 20160504-975-19-6 [1] MainView { TextField { id: field anchors.top: parent.top anchors.left: parent.left anchors.right: parent.right inputMethodHints: Qt.ImhDigitsOnly validator: RegExpValidator { regExp: /^\d$/ } } Component.onCompleted: field.forceActiveFocus() } ** Affects: ubuntu-keyboard (Ubuntu) Importance: Undecided Status: New ** Attachment added: "_usr_bin_maliit-server.32011.crash" https://bugs.launchpad.net/bugs/1595308/+attachment/4688711/+files/_usr_bin_maliit-server.32011.crash -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1595308 Title: Pressing "space" character on OSK with a validator can crash maliit Status in ubuntu-keyboard package in Ubuntu: New Bug description: 1) Save the code below [1] in a test.qml file 2) Run it on the phone with "qmlscene --desktop_file_hint=dialer-app test.qml" 3) Press the "space" character several times in a row 4) Eventually maliit crashes. I've attached a crash file from this below. current build number: 111 device name: turbo channel: ubuntu-touch/rc-proposed/meizu.en last update: 2016-06-22 12:52:32 version version: 111 version ubuntu: 20160622 version device: 20160617-82a5c0d version custom: 20160504-975-19-6 [1] MainView { TextField { id: field anchors.top: parent.top anchors.left: parent.left anchors.right: parent.right inputMethodHints: Qt.ImhDigitsOnly validator: RegExpValidator { regExp: /^\d$/ } } Component.onCompleted: field.forceActiveFocus() } To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-keyboard/+bug/1595308/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595308] Re: Pressing "space" character on OSK with a validator can crash maliit
Obviously this should be fixed, but I would also accept a fix for bug 1586435 to avoid needing a validator in the first place. :) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1595308 Title: Pressing "space" character on OSK with a validator can crash maliit Status in ubuntu-keyboard package in Ubuntu: New Bug description: 1) Save the code below [1] in a test.qml file 2) Run it on the phone with "qmlscene --desktop_file_hint=dialer-app test.qml" 3) Press the "space" character several times in a row 4) Eventually maliit crashes. I've attached a crash file from this below. current build number: 111 device name: turbo channel: ubuntu-touch/rc-proposed/meizu.en last update: 2016-06-22 12:52:32 version version: 111 version ubuntu: 20160622 version device: 20160617-82a5c0d version custom: 20160504-975-19-6 [1] MainView { TextField { id: field anchors.top: parent.top anchors.left: parent.left anchors.right: parent.right inputMethodHints: Qt.ImhDigitsOnly validator: RegExpValidator { regExp: /^\d$/ } } Component.onCompleted: field.forceActiveFocus() } To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-keyboard/+bug/1595308/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1574020] Re: Can't use networkmanager from lightdm
I have two configured wifi connections. For each I went to the config files and they both had the "permissions=user:username:;" I removed "user:username:;" to restore "permissions=" Login out, I still had the insufficient privilege problem. But restarting solved the problem!!! Thank you modolo! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1574020 Title: Can't use networkmanager from lightdm Status in network-manager package in Ubuntu: Confirmed Status in unity-greeter package in Ubuntu: Confirmed Bug description: After upgrading to 16.04 desktop (unity) (clean install) from 14.04, (so not really upgrading, but you get the point) I noticed that lightdm with unity-greeter (all stock, nothing changed) can't connect to WiFi with network-manager. WiFi works after loggin it, but it should be working before also, if not, what's the point in having an icon there :) I get the following message: Failed to add/activate connection. - (1) Insufficient privileges. - see image. This worked fine in 14.04. I have noticed this problem in both my desktop (Broadcom WiFi) and Laptop (Intel WiFi) - So it has nothing to be with the chip. Feel free to ask for more info. Edit: From syslog: Apr 23 16:50:46 desktop NetworkManager[979]: nm_settings_connection_delete: assertion 'NM_IS_SETTINGS_CONNECTION (self)' failed Apr 23 16:50:46 desktop NetworkManager[979]: [1461423046.1662] audit: op="connection-add-activate" pid=1275 uid=108 result="fail" reason="Insufficient privileges." Apr 23 16:50:46 desktop NetworkManager[979]: (NetworkManager:979): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1574020/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1591547] Re: Merge pcsc-lite 1.8.17-1 (main) from Debian testing (main)
** Tags added: needs-debian-merge upgrade-software-version -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pcsc-lite in Ubuntu. https://bugs.launchpad.net/bugs/1591547 Title: Merge pcsc-lite 1.8.17-1 (main) from Debian testing (main) Status in pcsc-lite package in Ubuntu: New Bug description: Please merge pcsc-lite 1.8.17-1 (main) from Debian testing (main) 1.8.17: Ludovic Rousseau 29 May 2016 - Fix SCardEndTransaction() issue with a SCARD_SHARE_EXCLUSIVE connection - Fix an issue when used with systemd (problem in signal handler) - SCardGetAttrib(): set pcbAttrLen when buffer is too small - Doxygen: SCardGetAttrib() pbAttr can be NULL - Doxygen: SCardGetAttrib() *pcbAttrLen contains the buffer size - fix compilation warnings and link errors on SunOS - Some other minor improvements 1.8.16: Ludovic Rousseau 20 March 2016 - SCardCancel() was not correctly handled When a SCardGetStatusChange() was cancelled then a next PC/SC call after the SCardGetStatusChange() may fail with a strange error code if the event waited in SCardGetStatusChange() occurs. - Doxygen: fix different documentation issues - SCARD_SCOPE_GLOBAL is now defined in a public header (even if never used) - Enable Trace and Profile features using compiler flags and without modifying the source code - Some other minor improvements and bug corrections 1.8.15: Ludovic Rousseau 25 December 2015 - Add support of remove and/or customize PC/SC reader names using PCSCLITE_FILTER_IGNORE_READER_NAMES and PCSCLITE_FILTER_EXTEND_READER_NAMES See http://ludovicrousseau.blogspot.fr/2015/12/remove-andor-customize-pcsc-reader-names.html - Some other minor improvements and bug corrections - Explanation of the Ubuntu delta: * Merge new upstream release from Debian Unstable (LP: #1483750). - debian/rules: Move runtime libraries to /lib, for the benefit of wpasupplicant. (See Debian #531592) Sorry, my packaging skills are zero, so that I can't work on this merge. - Changelog entries since current yakkety version 1.8.14-1ubuntu1: pcsc-lite (1.8.17-1) unstable; urgency=medium * New upstream release * debian/control: Standards-Version: 3.9.7 -> 3.9.8. No change needed. -- Ludovic RousseauSun, 29 May 2016 17:30:12 +0200 pcsc-lite (1.8.16-1) unstable; urgency=medium * New upstream release * debian/control: fix lintian warning vcs-field-uses-insecure-uri vcs-browser Use https:// instead of http:// * debian/control: Standards-Version: 3.9.6 -> 3.9.7. No change needed. * debian/rules: use "hardening=+all" to harden even more the binaries -- Ludovic Rousseau Sun, 20 Mar 2016 17:28:29 +0100 pcsc-lite (1.8.15-1) unstable; urgency=medium * New upstream release -- Ludovic Rousseau Fri, 25 Dec 2015 21:28:30 +0100 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1591547/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1465331] Re: [scopes] should Dash rotate
Are there plans to also rotate the greeter? Seems odd to have to login always in landscape mode on my N7. New bug needed? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1465331 Title: [scopes] should Dash rotate Status in Canonical System Image: Fix Released Status in Ubuntu UX: Fix Committed Status in unity8 package in Ubuntu: Fix Released Bug description: Shell rotation has now been released. On the phone, it feels a little odd that dash doesn't rotate. Could we consider making dash into a rotating app ? -- UX Comment -- Orientation design: from portrait to landscape presentation can serve as a guide for the agreed design direction. (https://docs.google.com/presentation/d/14hMDaQDcGyBnMO7UYI76hfJRPbGME4tN5Wm70O3z0ds/edit#slide=id.ga333e0b9a_0_163 Specs will be posted/updated as soon as they are available. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1465331/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1388931] Re: Support 12h or 24h time display format
** Changed in: indicator-datetime (Ubuntu) Assignee: Charles Kerr (charlesk) => Renato Araujo Oliveira Filho (renatofilho) ** Changed in: canonical-devices-system-image Assignee: Pat McGowan (pat-mcgowan) => Bill Filler (bfiller) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-datetime in Ubuntu. https://bugs.launchpad.net/bugs/1388931 Title: Support 12h or 24h time display format Status in Canonical System Image: Confirmed Status in Ubuntu Clock App: Confirmed Status in Ubuntu UX: Won't Fix Status in indicator-datetime package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Bug description: Updating this bug based on the comments and dupes. There should be a setting in the Time & Date settings control panel to select 12 or 24 hour display format. This should be honored in the indicator, greeter and clock app. gsetting com.canonical.indicator.datetime time-format controls this To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1388931/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1480654] Re: [regression] Input focus delay after switching app back into focus since OTA5
I can confirm that (a) (b) and (c) in Oliver's comment [1] affects me. I will add another: d) unresponsive to power button press to wake up device. I sometimes need to press a dozen or more times before the display will respond and I'm presented with a login screen, or sometimes with the restart/cancel, etc option menu. About: Nexus 7 (2013) Ubuntu 15.04 (r467) Cheers, Randall [1] https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1480654/comments/26 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1480654 Title: [regression] Input focus delay after switching app back into focus since OTA5 Status in Canonical System Image: Confirmed Status in Mir: Fix Released Status in mir package in Ubuntu: Fix Released Status in qtmir package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: i am not sure if it started with OTA4 or OTA5 but since one of the recent OTA upgrades my arale takes between half a second and one second before an app takes input again when one switches it from background back into focus. i'm talking about apps that were only sigstopped, not OOM killed here (i.e. no restart involved, just sigcont). this used to be instant before and gives a weird feeling of sluggishness. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1480654/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1574020] Re: Can't use networkmanager from lightdm
modolo: THANK YOU!! This was driving me nuts.. Your solution 100% works. Now we just need devs of network-manager to figure out why the permissions are wrong. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1574020 Title: Can't use networkmanager from lightdm Status in network-manager package in Ubuntu: Confirmed Status in unity-greeter package in Ubuntu: Confirmed Bug description: After upgrading to 16.04 desktop (unity) (clean install) from 14.04, (so not really upgrading, but you get the point) I noticed that lightdm with unity-greeter (all stock, nothing changed) can't connect to WiFi with network-manager. WiFi works after loggin it, but it should be working before also, if not, what's the point in having an icon there :) I get the following message: Failed to add/activate connection. - (1) Insufficient privileges. - see image. This worked fine in 14.04. I have noticed this problem in both my desktop (Broadcom WiFi) and Laptop (Intel WiFi) - So it has nothing to be with the chip. Feel free to ask for more info. Edit: From syslog: Apr 23 16:50:46 desktop NetworkManager[979]: nm_settings_connection_delete: assertion 'NM_IS_SETTINGS_CONNECTION (self)' failed Apr 23 16:50:46 desktop NetworkManager[979]: [1461423046.1662] audit: op="connection-add-activate" pid=1275 uid=108 result="fail" reason="Insufficient privileges." Apr 23 16:50:46 desktop NetworkManager[979]: (NetworkManager:979): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1574020/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
Thanks Till, will wait for the announcement. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
Arup, the new lsb packages indeed did not make it yet into -proposed. They need to get approved by the SRU team. When this is done (can take some days) an announcement is posted here asking for testing the packages. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1592545] Re: ubuntu is using gallium graphics instead of intel graphics
*** This bug is a duplicate of bug 1592544 *** https://bugs.launchpad.net/bugs/1592544 ** This bug has been marked a duplicate of bug 1592544 ubuntu is using gallium graphics instead of intel graphics -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1592545 Title: ubuntu is using gallium graphics instead of intel graphics Status in xorg package in Ubuntu: New Bug description: xorg file empty, I tried to uninstall the gallium drivers but it didn't work ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg (not installed) ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 NonfreeKernelModules: nvidia_drm nvidia_modeset nvidia .proc.driver.nvidia.gpus..02.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:02:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 367.27 Thu Jun 9 18:53:27 PDT 2016 GCC version: gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) .tmp.unity_support_test.1: ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue Jun 14 21:50:15 2016 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu DkmsStatus: bbswitch, 0.8, 4.4.0-22-generic, x86_64: installed bbswitch, 0.8, 4.4.0-24-generic, x86_64: installed nvidia-367, 367.27, 4.4.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Dell 4th Gen Core Processor Integrated Graphics Controller [1028:05fe] Subsystem: Dell GK107M [GeForce GT 750M] [1028:05fe] InstallationDate: Installed on 2016-04-25 (50 days ago) InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) MachineType: Dell Inc. XPS 15 9530 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-24-generic.efi.signed root=UUID=f565161c-e76f-4b59-b989-60ea2a0b51a6 ro nomodeset nomodeset nouveau.modeset=0 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/30/2015 dmi.bios.vendor: Dell Inc. dmi.bios.version: A09 dmi.board.name: XPS 15 9530 dmi.board.vendor: Dell Inc. dmi.board.version: A09 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA09:bd07/30/2015:svnDellInc.:pnXPS159530:pvrA09:rvnDellInc.:rnXPS159530:rvrA09:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: XPS 15 9530 dmi.product.version: A09 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.12.2+16.04.20160526-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1ubuntu0.16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Tue Jun 14 21:48:10 2016 xserver.configfile: /etc/X11/xorg.conf xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.18.3-1ubuntu2.2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1592545/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
Till, I had removed Trusty repos right after lsb install. I did a fresh install and enabled proposed as per your instructions. After that I tried installing lsb and lsb-printing only to be told that both packages don't exist. I think the files haven't made it to the repository yet. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595249] Re: "You have to press and hold the record icon" is truncated in german
** Description changed: - "You have to press and hold the record icon" is truncated in german language (even in landscape mode). + "You have to press and hold the record icon" (Du musst das Aufnahmesymbol berühren und gedrückt halten) is truncated in german language (even in landscape mode). So nobody can read what to do with the microphone symbol. This happens to me on a bq 4.5 with OTA 11. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1595249 Title: "You have to press and hold the record icon" is truncated in german Status in messaging-app package in Ubuntu: New Bug description: "You have to press and hold the record icon" (Du musst das Aufnahmesymbol berühren und gedrückt halten) is truncated in german language (even in landscape mode). So nobody can read what to do with the microphone symbol. This happens to me on a bq 4.5 with OTA 11. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1595249/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594452] Re: Add vulcan support
** Also affects: gcc-5 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1594452 Title: Add vulcan support Status in binutils package in Ubuntu: Confirmed Status in gcc-5 package in Ubuntu: New Status in gcc-6 package in Ubuntu: Confirmed Bug description: Vulcan support has recently landed upstream. Please include this backport in Ubuntu. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/1594452/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1005209] Re: app-install-data-partner package is missing desktop and icon files
This is also affecting the new gnome-software package in Bug #1578473 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/1005209 Title: app-install-data-partner package is missing desktop and icon files Status in app-install-data-partner package in Ubuntu: Triaged Status in ubuntu-meta package in Ubuntu: Confirmed Status in app-install-data-partner package in Baltix: In Progress Bug description: [Impact] * app-install-data-partner doesn't install any .desktop files, so the Canonical Partners sections in the Ubuntu Software Center and the Muon Software Center are empty. [Test Case] * Install app-install-data-partner * Open Ubuntu Software Center * In the software drop-down list, select Canonical Partners [Regression Potential] * The package hasn't been updated for Precise or Trusty, so any change would be positive. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/app-install-data-partner/+bug/1005209/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589242] Re: Turning the mouse on or off unlocks the greeter
I can't reproduce this using a keyboard/mouse bluetooth combo using the phone/image below. I looked at the code, but didn't see any obvious reason this would occur. current build number: 111 device name: turbo channel: ubuntu-touch/rc-proposed/meizu.en last update: 2016-06-22 12:52:32 version version: 111 version ubuntu: 20160622 version device: 20160617-82a5c0d version custom: 20160504-975-19-6 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1589242 Title: Turning the mouse on or off unlocks the greeter Status in unity8 package in Ubuntu: New Bug description: Steps to reproduce: - Ensure you have "no security/swiping" enabled for unlocking. - Switch the screen off and on, you get the greeter. - If your bluetooth mouse in off, turn it on. If it's on, turn it off. Expected result: Nothing in particular, the UX of the greeter does not change between desktop and staged mode. What actually happens: The greeter unlocks. Note that this doesn't happen if there is a security in place (Pin or password) so it's not really a security issue. It also does not happen every time, apparently. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1589242/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1529815] Re: InfiniBand DHCP flow with PRA and DHCP relay not working
** Tags removed: sts-sponsor -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu. https://bugs.launchpad.net/bugs/1529815 Title: InfiniBand DHCP flow with PRA and DHCP relay not working Status in isc-dhcp package in Ubuntu: Fix Released Status in isc-dhcp source package in Trusty: In Progress Status in isc-dhcp source package in Wily: Fix Committed Status in isc-dhcp source package in Xenial: Fix Committed Bug description: [Impact] * Infiniband users relying on DHCP can't use DHCP relay. [Test Case] * Comment #13 * Mellanox has tested themselves. * Clear way of knowing if fix worked (tcpdump). [Regression Potential] * Only related to Infiniband. * Infiniband support could stop working (unlikely, already tested). [Other Info] None [ Original Description ] * Anything else you think is useful to include * Anticipate questions from users, SRU, +1 maintenance, security teams and the Technical Board * and address these questions in advance DHCP client is sending discover with Unicast type request for the offer, in this configuration of IB to ETH through a relay we need the type to be broadcast. The issue is that when using dhclient from the client on Ubuntu (and only on Ubuntu) with MOFED or inbox driver, we see that that DHCP server offers in unicast instead of broadcast. It seems there is no way to correct this from the client side using dhclient configuration file. this issue exist even when we use always-broadcast statement in configuration file. in other vendors we see that discover request type is broadcast. attached pcap files from working (other vendor) and not working (Ubuntu) clients. DHCP CLIENT (IPoIB) Ubuntu 14.04 kernel 3.13.0-74 Mellanox OFED 3.1-1.0.3 or inbox driver isc-dhcp-client 4.2.4-7ubuntu12.3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1529815/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595249] [NEW] "You have to press and hold the record icon" is truncated in german
Public bug reported: "You have to press and hold the record icon" is truncated in german language (even in landscape mode). So nobody can read what to do with the microphone symbol. This happens to me on a bq 4.5 with OTA 11. ** Affects: messaging-app (Ubuntu) Importance: Undecided Status: New ** Attachment added: "truncated text in portrait mode" https://bugs.launchpad.net/bugs/1595249/+attachment/4688605/+files/screenshot20160622_150610683.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1595249 Title: "You have to press and hold the record icon" is truncated in german Status in messaging-app package in Ubuntu: New Bug description: "You have to press and hold the record icon" is truncated in german language (even in landscape mode). So nobody can read what to do with the microphone symbol. This happens to me on a bq 4.5 with OTA 11. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1595249/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595249] Re: "You have to press and hold the record icon" is truncated in german
** Attachment added: "truncated text in landscape mode" https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1595249/+attachment/4688606/+files/screenshot20160622_182651840.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to messaging-app in Ubuntu. https://bugs.launchpad.net/bugs/1595249 Title: "You have to press and hold the record icon" is truncated in german Status in messaging-app package in Ubuntu: New Bug description: "You have to press and hold the record icon" is truncated in german language (even in landscape mode). So nobody can read what to do with the microphone symbol. This happens to me on a bq 4.5 with OTA 11. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/messaging-app/+bug/1595249/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1588457] Re: UseDNS default changed to no, locking out authorized_keys from="hostname" users when upgrading to Xenial
** Also affects: ubuntu-release-notes Importance: Undecided Status: New ** Changed in: ubuntu-release-notes Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openssh in Ubuntu. https://bugs.launchpad.net/bugs/1588457 Title: UseDNS default changed to no, locking out authorized_keys from="hostname" users when upgrading to Xenial Status in Release Notes for Ubuntu: Fix Released Status in openssh package in Ubuntu: Won't Fix Bug description: [Impact] When a user has configured their authorized_keys file with the directive "from=" to restrict the usage of those keys, if that server is upgraded to Xenial (or Wily) the user may get locked out. [Test Case] * Create 3 containers (client, trusty, xenial) $ lxc launch ubuntu:14.04 client $ lxc launch ubuntu:14.04 ssh-trusty $ lxc launch ubuntu:16.04 ssh-trusty * To make sure their hostnames are properly registered in dnsmasq and dns resolution works, ssh into each container and run "sudo reboot" (restart the network should do the trick too) * In the 'client' container generate a ssh key $ lxc exec client /bin/bash (client)# ssh-keygen * Add the ssh key in the other two containers for the user ubuntu * Verify a connection can be established from client to ssh-xenial and ssh-trusty (client)# ssh ssh-xenial (client)# ssh ssh-trusty * Edit in add the prefix from="client.lxd" in both containers authorized_keys file (ssh-xenial and ssh-trusty) * Check if you can connect (client)# ssh ssh-trusty (client)# ssh ssh-xenial Expected: you can connect to both containers Actual results: You can connect to the trusty server, but you can't to the xenial one, because since Wily (openssh 1:6.9p1-1[0] ) the configuration key UseDNS default changed from "yes" to "no", so sshd is not doing a reverse dns request to know if the incoming connection matched "client.lxd" [Workaround] Edit /etc/ssh/sshd_config and set "UseDNS yes" $ echo "UseDNS yes" | sudo tee -a /etc/ssh/sshd_config [More Info] Relevant portion from the manpage[1]: UseDNS Specifies whether sshd(8) should look up the remote host name, and to check that the resolved host name for the remote IP address maps back to the very same IP address. If this option is set to “no” (the default) then only addresses and not host names may be used in ~/.ssh/known_hosts from and sshd_config Match Host directives. commit 3cd5103c1e1aaa59bd66f7f52f6ebbcd5deb12f9 [2] Author: dera...@openbsd.orgDate: Mon Feb 2 01:57:44 2015 + upstream commit increasing encounters with difficult DNS setups in darknets has convinced me UseDNS off by default is better ok djm [0] http://changelogs.ubuntu.com/changelogs/pool/main/o/openssh/openssh_6.9p1-1/changelog [1] http://manpages.ubuntu.com/manpages/xenial/en/man5/sshd_config.5.html [2] https://github.com/openssh/openssh-portable/commit/3cd5103c1e1aaa59bd66f7f52f6ebbcd5deb12f9 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/1588457/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594776] Re: add-apt-repository explodes on missing ppa
** Tags added: patch -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1594776 Title: add-apt-repository explodes on missing ppa Status in software-properties package in Ubuntu: New Status in software-properties source package in Xenial: New Bug description: Just saw this on freshly updated Xenial. I think it's trying to be helpful and tell me what PPAs a particular LP team has published, but in the end it explodes: $ sudo add-apt-repository ppa:juju/next Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 102, in _get_https_content_py3 lp_page = urllib.request.urlopen(request, cafile=LAUNCHPAD_PPA_CERT) File "/usr/lib/python3.5/urllib/request.py", line 162, in urlopen return opener.open(url, data, timeout) File "/usr/lib/python3.5/urllib/request.py", line 471, in open response = meth(req, response) File "/usr/lib/python3.5/urllib/request.py", line 581, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python3.5/urllib/request.py", line 509, in error return self._call_chain(*args) File "/usr/lib/python3.5/urllib/request.py", line 443, in _call_chain result = func(*args) File "/usr/lib/python3.5/urllib/request.py", line 589, in http_error_default raise HTTPError(req.full_url, code, msg, hdrs, fp) urllib.error.HTTPError: HTTP Error 404: Not Found During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 327, in get_ppa_info ret = get_ppa_info_from_lp(user, ppa) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 92, in get_ppa_info_from_lp return get_info_from_lp(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 88, in get_info_from_lp return _get_https_content_py3(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 108, in _get_https_content_py3 raise PPAException("Error reading %s: %s" % (lp_url, reason), e) softwareproperties.ppa.PPAException: 'Error reading https://launchpad.net/api/1.0/~juju/+archive/ubuntu/next: Not Found' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 393, in shortcut_handler return PPAShortcutHandler(shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 356, in __init__ info = get_ppa_info(self.shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 339, in get_ppa_info _get_suggested_ppa_message(user, ppa)) softwareproperties.shortcuts.ShortcutException: Cannot add PPA: 'ppa:~juju/ubuntu/next'. The team named '~juju' has no PPA named 'ubuntu/next' Please choose from the following available PPAs: * '1.22': 1.22 Updates * '1.22-proposed': 1.22 Proposed * '1.23': 1.23 Updates * 'daily': Juju Daily * 'devel': juju devel packages * 'enablement': Juju Enablement * 'experimental': juju experimental packages * 'golang': juju-golang * 'proposed': juju proposed packages * 'stable': juju stable packages Error: 'ppa:juju/next' invalid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1594776/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1544477] Re: No sound notification for new SMS (Ubuntu Touch)
@Anupam: it's possible - if you could keep an eye on this and see if you see a direct correlation here between running out of memory and losing the notification sound for SMS messages. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1544477 Title: No sound notification for new SMS (Ubuntu Touch) Status in Canonical System Image: Confirmed Status in media-hub package in Ubuntu: Invalid Status in pulseaudio package in Ubuntu: Confirmed Bug description: I noticed for last 2-3 days there is no sound notification for a new SMS, but there's a blinking green LED notification. Also in the indicator menu the envelope icon turns green and the new SMS is listed as usual. Things are working alright for Telegram, Gmail etc. (sound+LED+indicator menu). Device: bq Aquaris E5 HD, Ubuntu 15.04 (OTA-9) UPDATE: Screenshots get silent too. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1544477/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1585723] Re: UbuntuShape on intel i915 (Atom) uses fallback CPU rendering
** Changed in: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1585723 Title: UbuntuShape on intel i915 (Atom) uses fallback CPU rendering Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Bug description: I'm digging into unity8 performance problems on older generation Intel GPUs - specifically i915 Atom GPUs. I've tested a simple QML file with a single empty UbuntuShape in it: import QtQuick 2.4 import Ubuntu.Components 1.3 Rectangle { width: 400 height: 300 color: "blue" UbuntuShape {} } Running it with INTEL_DEBUG=perf env var set, I get this output: i915_program_error: Exceeded max ALU instructions (76 out of 64) ENTER FALLBACK 1: Program Mapping a busy BO, causing a stall on the GPU. which implies that MESA was unable to compile one of the UbuntuShape shaders as it created more ALU instructions than the GPU could deal with. MESA falls back to CPU rendering as a result. The GPU stall message I guess is related to that. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1585723/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
** Changed in: lsb (Ubuntu Xenial) Milestone: None => ubuntu-16.04.1 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595235] [NEW] Preview widgets with state lose state when device rotation triggers a change in the number of preview widget columns
Public bug reported: There's a few preview widgets that have state (i.e. when adding text to a new comment, or when doing an inline video preview), that state will get lost if changing the orientation of the device gets us more or less columns since old preview widgets will be deleted and new ones will be created. We need either a way to reuse the preview widgets (probably hard) or a way to save/restore the information on destroy/creation. ** Affects: unity8 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1595235 Title: Preview widgets with state lose state when device rotation triggers a change in the number of preview widget columns Status in unity8 package in Ubuntu: New Bug description: There's a few preview widgets that have state (i.e. when adding text to a new comment, or when doing an inline video preview), that state will get lost if changing the orientation of the device gets us more or less columns since old preview widgets will be deleted and new ones will be created. We need either a way to reuse the preview widgets (probably hard) or a way to save/restore the information on destroy/creation. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1595235/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595230] [NEW] Keyboard height reporting not working in windowed mode
Public bug reported: Currently the OSK height reporting (Qt.inputMethodRect.height) can either report its full height (as it does in staged mode) or not do any height reporting at all (as done in windowed mode currently). The problem with full height reporting in Windowed mode is that the OSK does not necessarily cover the app with its full height if the app is not touching the bottom edge, so the app would move contents upwards too much. As a quick fix we have disabled height reporting completely for windowed mode. The problem with that is that applications don't move the content any more at all which might make the OSK cover the input field. We need to add support for partial OSK height reporting. In that case, unity8 would provide information to the OSK how much it covers a particular app window so that the OSK can report that to the app. ** Affects: canonical-devices-system-image Importance: Undecided Status: New ** Affects: ubuntu-keyboard (Ubuntu) Importance: Undecided Status: New ** Affects: unity8 (Ubuntu) Importance: Undecided Status: New ** Also affects: ubuntu-keyboard (Ubuntu) Importance: Undecided Status: New ** Also affects: canonical-devices-system-image Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1595230 Title: Keyboard height reporting not working in windowed mode Status in Canonical System Image: New Status in ubuntu-keyboard package in Ubuntu: New Status in unity8 package in Ubuntu: New Bug description: Currently the OSK height reporting (Qt.inputMethodRect.height) can either report its full height (as it does in staged mode) or not do any height reporting at all (as done in windowed mode currently). The problem with full height reporting in Windowed mode is that the OSK does not necessarily cover the app with its full height if the app is not touching the bottom edge, so the app would move contents upwards too much. As a quick fix we have disabled height reporting completely for windowed mode. The problem with that is that applications don't move the content any more at all which might make the OSK cover the input field. We need to add support for partial OSK height reporting. In that case, unity8 would provide information to the OSK how much it covers a particular app window so that the OSK can report that to the app. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1595230/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1590188] Re: Widgets is are in wrong order after posting one comment in Preview Page
This bug was fixed in the package unity-scopes-shell - 0.5.7+16.10.20160617.1-0ubuntu1 --- unity-scopes-shell (0.5.7+16.10.20160617.1-0ubuntu1) yakkety; urgency=medium [ Michael Zanetti ] * add libertine-scope to the list of exceptions that can directly activate things [ Pawel Stolowski ] * Set widget status as received if it already exists in the model. (LP: #1590188) -- Pawel StolowskiFri, 17 Jun 2016 15:13:38 + ** Changed in: unity-scopes-shell (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scopes-shell in Ubuntu. https://bugs.launchpad.net/bugs/1590188 Title: Widgets is are in wrong order after posting one comment in Preview Page Status in Canonical System Image: In Progress Status in unity-scopes-shell package in Ubuntu: Fix Released Bug description: I am testing on some golang scopes such as doubanbook(https://code.launchpad.net/~hanloon-team/hanloon/douban) flickr(https://code.launchpad.net/~hanloon-team/hanloon/unity-scope-flickr) After I post one comment and the Preview page refreshes, the order of Preview Widgets is reversed. For example, before I post comment, Art is on the up most position, while after I post comment, Art is the last widget in the page. I can see from the log, the order of widgets is adjusted(art at first is 0, and at last is 15). But i don't know why. AS Pawel's suggestion, I used scopes.ColumnLayout as workaround which could fix this issue. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1590188/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
Till thank you very much, however adding proposed will also bring in other files and that will be iffy on a long term LTS install. Any ways I can download the .deb before this file is released to mainstream? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594944] Re: Setup.exec() for existing account type results in blank full screen window
Argh, that's a regression I introduced fixing bug 1582824. It was a typo, fix is coming soon. :-) Just to understand the severity of this, is this something that you can reproduce with other apps, like pay-ui? Actual webapps are not affected by this -- this only affects unconfined apps. ** Branch linked: lp:~mardy/ubuntu-system-settings-online-accounts /empty-page-1594944 ** Also affects: webapps-sprint Importance: Undecided Status: New ** Changed in: ubuntu-system-settings-online-accounts (Ubuntu) Status: Incomplete => In Progress ** Changed in: ubuntu-system-settings-online-accounts (Ubuntu) Importance: Undecided => Critical ** Changed in: ubuntu-system-settings-online-accounts (Ubuntu) Assignee: (unassigned) => Alberto Mardegan (mardy) ** Changed in: webapps-sprint Status: New => In Progress ** Changed in: webapps-sprint Importance: Undecided => Critical ** Changed in: webapps-sprint Assignee: (unassigned) => Alberto Mardegan (mardy) ** Changed in: webapps-sprint Milestone: None => sprint-24 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-system-settings- online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1594944 Title: Setup.exec() for existing account type results in blank full screen window Status in Canonical System Image: New Status in webapps-sprint: In Progress Status in ubuntu-system-settings-online-accounts package in Ubuntu: In Progress Bug description: If an account already exists, calling Setup.exec() again results in a blank window being overlaid on top of the application which made the request. There is no way to close this window. This API is what the online accounts integration in the scopes API relies upon, to allow logging in to accounts, and so we have come to rely upon this API as well in multiple places, as a means to log into the Ubuntu One account, when it is necessary to do so. However, due to this issue, the only way to reliably present a login window at an appropriate time, is to delete the account when it appears to have been invalidated by the server, and to then present the login window to create a new account. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1594944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1591246] Re: Wrong icon in notification of missed alarms and events
** Changed in: canonical-devices-system-image Assignee: Alejandro J. Cura (alecu) => Bill Filler (bfiller) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-datetime in Ubuntu. https://bugs.launchpad.net/bugs/1591246 Title: Wrong icon in notification of missed alarms and events Status in Canonical System Image: Confirmed Status in Ubuntu UX: New Status in indicator-datetime package in Ubuntu: Confirmed Bug description: The new implemented notifications (Released in OTA-11; see Bug #1440111) for missed alarms and events is using wrong icons. 1) If an alarm has been missed, the notification should use the icon of the clock app instead of the calendar app's. 2) A missed alarm should use the clock-icon on the right instead of an icon showing a number. 3) A missed event should use the new event-icon without a number. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1591246/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1591246] Re: Wrong icon in notification of missed alarms and events
Regarding #5:This icon is the symbolic icon of calendar app, as soon as we update the calendar app icon and the symbolic one this will be fixed. There is plans to update calendar app icon, to not use number in the icon. ** Changed in: indicator-datetime (Ubuntu) Assignee: Charles Kerr (charlesk) => Renato Araujo Oliveira Filho (renatofilho) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-datetime in Ubuntu. https://bugs.launchpad.net/bugs/1591246 Title: Wrong icon in notification of missed alarms and events Status in Canonical System Image: Confirmed Status in Ubuntu UX: New Status in indicator-datetime package in Ubuntu: Confirmed Bug description: The new implemented notifications (Released in OTA-11; see Bug #1440111) for missed alarms and events is using wrong icons. 1) If an alarm has been missed, the notification should use the icon of the clock app instead of the calendar app's. 2) A missed alarm should use the clock-icon on the right instead of an icon showing a number. 3) A missed event should use the new event-icon without a number. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1591246/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594430] Re: Location prompt not translated on first boot
** Changed in: canonical-devices-system-image Status: Triaged => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1594430 Title: Location prompt not translated on first boot Status in Canonical System Image: In Progress Status in unity8 package in Ubuntu: In Progress Bug description: Test case. - Flash your device. - Select Spanish on the wizard. - Finish the wizard. - Dismiss the Welcome to Ubuntu screen. - Wait to Scopes location prompt to appear. Expected result. - Scopes location prompt is translated to Spanish. Actual result. - Location prompt is displayed in English. current build number: 361 device name: krillin channel: ubuntu-touch/rc-proposed/bq-aquaris.en To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1594430/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1544477] Re: No sound notification for new SMS (Ubuntu Touch)
@Jim Stupid question: can this be possibly related to the memory-leak(?) issue? Last few times I noticed that when this silent SMS issue occurred, the issue of frequent blank screens in web renderers (e.g. facebook app shows the message: "Oops, something went wrong." and asks to reload all the time) started to show up simultaneously. Both the issues go away after a reboot. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1544477 Title: No sound notification for new SMS (Ubuntu Touch) Status in Canonical System Image: Confirmed Status in media-hub package in Ubuntu: Invalid Status in pulseaudio package in Ubuntu: Confirmed Bug description: I noticed for last 2-3 days there is no sound notification for a new SMS, but there's a blinking green LED notification. Also in the indicator menu the envelope icon turns green and the new SMS is listed as usual. Things are working alright for Telegram, Gmail etc. (sound+LED+indicator menu). Device: bq Aquaris E5 HD, Ubuntu 15.04 (OTA-9) UPDATE: Screenshots get silent too. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1544477/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1590776] Re: hide selection handle when start typing
** Branch linked: lp:~oxide-developers/oxide/packaging.wily ** Branch linked: lp:~oxide-developers/oxide/packaging.trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1590776 Title: hide selection handle when start typing Status in Canonical System Image: In Progress Status in Oxide: Fix Released Status in Oxide 1.15 series: Fix Committed Status in Oxide 1.16 series: Fix Committed Status in webbrowser-app package in Ubuntu: Invalid Bug description: we are showing the selection handle (in addition to the cursor) whenever entering a text field that already has text in it. For example, if you are replying to a Gmail message, you have an annoying blue selection handle blinking where you are trying to type and you can't turn it off. Or on a form, focusing on a field to append text will also show the selection handle. Or a multi line text area, adding a new line and typing at the beginning. Tested Chrome on Android and it behaves differently, and think we should do similar: 1. Show the selection handle initially, but have it disappear when you press any key (space, character, etc.) 2. Tapping anywhere in the field will cause handle to be shown again 3. Also, can we put the selection handle on the bottom of the cursor instead of the top? This is the behavior on Chrome for Android and the rest of our non-html platform in Ubuntu touch. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1590776/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
Till thank you very much, however adding proposed will also bring in other files and that will be iffy on a long term LTS install. Any ways I can download the .deb before this file is released to mainstream? Arup Roy Chowdhury On Wed, Jun 22, 2016 at 6:41 PM, Till Kamppeter <1536...@bugs.launchpad.net> wrote: > Arup, yes, you will not need the Trusty repos any more. > > If you want to verify this SRU, make sue that when you add xenial- > proposed that you remove all Trusty repos. > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1536353 > > Title: > [regression] Printer drivers install is broken as lsb package is not > available anymore > > To manage notifications about this bug go to: > > https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list:
[Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
When the call for verification of this SRU is announced in this bug report, the package is in -proposed. You add -proposed and do sudo apt-get install lsb sudo apt-get install lsb-printing Don't worry if the second gives an error, but please tell us if so. After that remove -proposed again so that you do not get test packages of other SRUs during later system updates. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1590776] Re: hide selection handle when start typing
** Branch linked: lp:~oxide-developers/oxide/packaging.xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1590776 Title: hide selection handle when start typing Status in Canonical System Image: In Progress Status in Oxide: Fix Released Status in Oxide 1.15 series: Fix Committed Status in Oxide 1.16 series: Fix Committed Status in webbrowser-app package in Ubuntu: Invalid Bug description: we are showing the selection handle (in addition to the cursor) whenever entering a text field that already has text in it. For example, if you are replying to a Gmail message, you have an annoying blue selection handle blinking where you are trying to type and you can't turn it off. Or on a form, focusing on a field to append text will also show the selection handle. Or a multi line text area, adding a new line and typing at the beginning. Tested Chrome on Android and it behaves differently, and think we should do similar: 1. Show the selection handle initially, but have it disappear when you press any key (space, character, etc.) 2. Tapping anywhere in the field will cause handle to be shown again 3. Also, can we put the selection handle on the bottom of the cursor instead of the top? This is the behavior on Chrome for Android and the rest of our non-html platform in Ubuntu touch. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1590776/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1590804] Re: fontconfig initialization spends most of its time parsing XML configuration files in /etc/fonts/conf.d/
I tried fc-cache, but starting a qml app still continues to open up the conf files. Digging through Qt source to understand where these calls are coming from. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to fontconfig in Ubuntu. https://bugs.launchpad.net/bugs/1590804 Title: fontconfig initialization spends most of its time parsing XML configuration files in /etc/fonts/conf.d/ Status in Canonical System Image: New Status in fontconfig package in Ubuntu: New Bug description: While profiling the startup of QML apps on the BQ E4.5 phone (armhf) I noticed that a significant amount of time (around 35ms) was spent solely on parsing the XML configuration files in /etc/fonts/conf.d/ There seems to be around 40 files on Ubuntu Phone in that directory. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1590804/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594944] Re: Setup.exec() for existing account type results in blank full screen window
Yes, it prevents pay-ui from working correctly. It could also affect any app in the store that uses online-accounts (but webapps have a hack that make it improbable that they would hit this issue). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-system-settings- online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1594944 Title: Setup.exec() for existing account type results in blank full screen window Status in Canonical System Image: New Status in webapps-sprint: In Progress Status in ubuntu-system-settings-online-accounts package in Ubuntu: In Progress Bug description: If an account already exists, calling Setup.exec() again results in a blank window being overlaid on top of the application which made the request. There is no way to close this window. This API is what the online accounts integration in the scopes API relies upon, to allow logging in to accounts, and so we have come to rely upon this API as well in multiple places, as a means to log into the Ubuntu One account, when it is necessary to do so. However, due to this issue, the only way to reliably present a login window at an appropriate time, is to delete the account when it appears to have been invalidated by the server, and to then present the login window to create a new account. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1594944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1575899] Re: Text disappears after suspend
** Attachment added: "dmesg > dmesg.txt" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+attachment/4688519/+files/dmesg.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1575899 Title: Text disappears after suspend Status in xorg package in Ubuntu: New Bug description: After waking my laptop running Xenial after it having been suspended, a lot of applications (e.g. Terminal and all settings) does not render most of the text that should be there. Some of it shows up on mouseover, but most is just permanently invisible until reboot of system. Detected a very similar bug after I created this issue: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1528843 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Wed Apr 27 21:44:36 2016 DistUpgraded: 2016-04-25 10:36:20,651 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a2e] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Haswell-ULT Integrated Graphics Controller [1043:13bd] InstallationDate: Installed on 2015-09-05 (234 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 03eb:8a0c Atmel Corp. Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. Bus 001 Device 005: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. UX301LAA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=6cc41411-46cb-4a14-a79a-038ee820f1aa ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to xenial on 2016-04-25 (2 days ago) dmi.bios.date: 12/31/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX301LAA.206 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX301LAA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX301LAA.206:bd12/31/2013:svnASUSTeKCOMPUTERINC.:pnUX301LAA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX301LAA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX301LAA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Wed Apr 27 16:42:36 2016 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id5126 vendor SHP xserver.version: 2:1.18.3-1ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1575899] Re: Text disappears after suspend
** Attachment added: "cat /sys/kernel/debug/suspend_stats > suspend_stats" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+attachment/4688520/+files/suspend_stats -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1575899 Title: Text disappears after suspend Status in xorg package in Ubuntu: New Bug description: After waking my laptop running Xenial after it having been suspended, a lot of applications (e.g. Terminal and all settings) does not render most of the text that should be there. Some of it shows up on mouseover, but most is just permanently invisible until reboot of system. Detected a very similar bug after I created this issue: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1528843 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Wed Apr 27 21:44:36 2016 DistUpgraded: 2016-04-25 10:36:20,651 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a2e] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Haswell-ULT Integrated Graphics Controller [1043:13bd] InstallationDate: Installed on 2015-09-05 (234 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 03eb:8a0c Atmel Corp. Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. Bus 001 Device 005: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. UX301LAA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=6cc41411-46cb-4a14-a79a-038ee820f1aa ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to xenial on 2016-04-25 (2 days ago) dmi.bios.date: 12/31/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX301LAA.206 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX301LAA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX301LAA.206:bd12/31/2013:svnASUSTeKCOMPUTERINC.:pnUX301LAA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX301LAA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX301LAA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Wed Apr 27 16:42:36 2016 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id5126 vendor SHP xserver.version: 2:1.18.3-1ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1575899] Re: Text disappears after suspend
** Attachment added: "/var/log/Xorg.0.log" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+attachment/4688527/+files/Xorg.0.log -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1575899 Title: Text disappears after suspend Status in xorg package in Ubuntu: New Bug description: After waking my laptop running Xenial after it having been suspended, a lot of applications (e.g. Terminal and all settings) does not render most of the text that should be there. Some of it shows up on mouseover, but most is just permanently invisible until reboot of system. Detected a very similar bug after I created this issue: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1528843 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Wed Apr 27 21:44:36 2016 DistUpgraded: 2016-04-25 10:36:20,651 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a2e] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Haswell-ULT Integrated Graphics Controller [1043:13bd] InstallationDate: Installed on 2015-09-05 (234 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 03eb:8a0c Atmel Corp. Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. Bus 001 Device 005: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. UX301LAA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=6cc41411-46cb-4a14-a79a-038ee820f1aa ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to xenial on 2016-04-25 (2 days ago) dmi.bios.date: 12/31/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX301LAA.206 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX301LAA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX301LAA.206:bd12/31/2013:svnASUSTeKCOMPUTERINC.:pnUX301LAA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX301LAA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX301LAA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Wed Apr 27 16:42:36 2016 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id5126 vendor SHP xserver.version: 2:1.18.3-1ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1575899] Re: Text disappears after suspend
** Attachment added: "/var/log/Xorg.0.log.old" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+attachment/4688528/+files/Xorg.0.log.old ** Changed in: xorg (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1575899 Title: Text disappears after suspend Status in xorg package in Ubuntu: New Bug description: After waking my laptop running Xenial after it having been suspended, a lot of applications (e.g. Terminal and all settings) does not render most of the text that should be there. Some of it shows up on mouseover, but most is just permanently invisible until reboot of system. Detected a very similar bug after I created this issue: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1528843 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Wed Apr 27 21:44:36 2016 DistUpgraded: 2016-04-25 10:36:20,651 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a2e] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Haswell-ULT Integrated Graphics Controller [1043:13bd] InstallationDate: Installed on 2015-09-05 (234 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 03eb:8a0c Atmel Corp. Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. Bus 001 Device 005: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. UX301LAA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=6cc41411-46cb-4a14-a79a-038ee820f1aa ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to xenial on 2016-04-25 (2 days ago) dmi.bios.date: 12/31/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX301LAA.206 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX301LAA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX301LAA.206:bd12/31/2013:svnASUSTeKCOMPUTERINC.:pnUX301LAA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX301LAA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX301LAA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Wed Apr 27 16:42:36 2016 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id5126 vendor SHP xserver.version: 2:1.18.3-1ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1575899] Re: Text disappears after suspend
Bug occurs after resuming from suspend. I shut the lid, which is set to suspend on close. Resume is triggered by lifting the lid. The bug seems to only occur after prolonged suspend states (e.g. being suspended from morning to afternoon). Had run the tasks 4-10 at https://wiki.ubuntu.com/DebuggingKernelSuspend this morning and had suspended it to finish collecting the data in the afternoon. Encountered the bug at resume and ran sudo sh -c "sync && echo 1 > /sys/power/pm_trace && pm-suspend" once and then saved all files according to the 11-12 and dmesg. ** Attachment added: "cat /proc/acpi/wakeup > wakeup" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+attachment/4688518/+files/wakeup -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1575899 Title: Text disappears after suspend Status in xorg package in Ubuntu: New Bug description: After waking my laptop running Xenial after it having been suspended, a lot of applications (e.g. Terminal and all settings) does not render most of the text that should be there. Some of it shows up on mouseover, but most is just permanently invisible until reboot of system. Detected a very similar bug after I created this issue: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1528843 ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Wed Apr 27 21:44:36 2016 DistUpgraded: 2016-04-25 10:36:20,651 DEBUG icon theme changed, re-reading DistroCodename: xenial DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a2e] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Haswell-ULT Integrated Graphics Controller [1043:13bd] InstallationDate: Installed on 2015-09-05 (234 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 03eb:8a0c Atmel Corp. Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. Bus 001 Device 005: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. UX301LAA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=6cc41411-46cb-4a14-a79a-038ee820f1aa ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to xenial on 2016-04-25 (2 days ago) dmi.bios.date: 12/31/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX301LAA.206 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX301LAA dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX301LAA.206:bd12/31/2013:svnASUSTeKCOMPUTERINC.:pnUX301LAA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX301LAA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX301LAA dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.12.2+16.04.20160415-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.67-1 version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Wed Apr 27 16:42:36 2016 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id5126 vendor SHP xserver.version: 2:1.18.3-1ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1575899/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe :
[Touch-packages] [Bug 1594944] Re: Setup.exec() for existing account type results in blank full screen window
Add a twitter account, and then run this attached QML on the phone. If you don't have a twitter account to test with, add any other account via system settings, and modify this QML to use that account instead of twitter. The result when the app runs is that a full screen blank window will be opened overlaid on the app itself. Run with "qmlscene --desktop_file_hint=/usr/share/applications/dialer- app.desktop twitter-test.qml" Output of online-account-service debug: service.cpp 42 requestAccess Got request: QMap(("application", QVariant(QString, "com.ubuntu.developer.webapps.webapp-twitter") ) ( "pid" , QVariant(uint, 28963) ) ( "provider" , QVariant(QString, "twitter") ) ) utils.cpp 49 apparmorProfileOfPeer App ID: "unconfined" request-manager.cpp 113 runQueue Head: OnlineAccountsUi::Request(0x1f10c78) mir-helper.cpp 151 session_event_callback Prompt Session state updated to 1 Loading module: 'libubuntu_application_api_touch_mirclient.so.3.0.0' /usr/bin/online-accounts-ui: unrecognized option '--socket' /usr/bin/online-accounts-ui: unrecognized option '--profile' ui-server.cpp 103 onDataReady QMap(("code", QVariant(QString, "process") ) ( "data" , QVariant(QVariantMap, QMap(("application", QVariant(QString, "com.ubuntu.developer.webapps.webapp-twitter") ) ( "pid" , QVariant(uint, 28963) ) ( "provider" , QVariant(QString, "twitter") ) ) ) ) ( "id" , QVariant(int, 0) ) ( "interface" , QVariant(QString, "com.ubuntu.OnlineAccountsUi") ) ( "profile" , QVariant(QString, "unconfined") ) ) (process:28975): accounts-glib-CRITICAL **: ag_application_get_desktop_app_info: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_desktop_app_info: assertion 'self != NULL' failed file not found: "/home/phablet/.local/share/accounts/applications/.application" (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed (process:28975): accounts-glib-CRITICAL **: ag_application_get_service_usage: assertion 'self != NULL' failed qml: Page_QMLTYPE_32(0x7826e8)"Twitter": In Ubuntu.Components 1.3, the use of Page.title, Page.flickable and Page.head is deprecated. Use Page.header and the PageHeader component instead. ** Attachment added: "twitter-test.qml" https://bugs.launchpad.net/ubuntu/+source/ubuntu-system-settings-online-accounts/+bug/1594944/+attachment/4688517/+files/twitter-test.qml -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-system-settings- online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1594944 Title: Setup.exec() for existing account type results in blank full screen window Status in Canonical System Image: New Status in ubuntu-system-settings-online-accounts package in Ubuntu: Incomplete Bug description: If an account already exists, calling Setup.exec() again results in a blank window being overlaid on top of the application which made the request. There is no way to close this window. This API is what the online accounts integration in the scopes API relies upon, to allow logging in to accounts, and so we have come to rely upon this
[Touch-packages] [Bug 1480654] Re: [regression] Input focus delay after switching app back into focus since OTA5
well, it was never actually solved completely ... (as you can see by daniels comment above) i suspect there are still multipple bugs ... there is: a) the spread animation getting stuck a few pixels before the window sits completely straight on the screen for a split second when you switch apps (doesnt happen every time but well noticeable throughout the day). b) input on re-focus (doesnt matter if with or without spread involved) for all apps using a webview acts delayed (try my G+ app or any other that uses the bottom navigation, bring the app in focus and try to swipe the navigation menu up ... you will notice it takes 3-4 swipes til there is any reaction)) c) general input delay when unlocking ... it usually takes multiple swipes after unlocking to get a reaction (for spread, launcher or app interaction) i think a) and c) are still this bug ... b) should perhaps be an oxide or unity8 one assuming mzanetti is right above. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1480654 Title: [regression] Input focus delay after switching app back into focus since OTA5 Status in Canonical System Image: Confirmed Status in Mir: Fix Released Status in mir package in Ubuntu: Fix Released Status in qtmir package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: i am not sure if it started with OTA4 or OTA5 but since one of the recent OTA upgrades my arale takes between half a second and one second before an app takes input again when one switches it from background back into focus. i'm talking about apps that were only sigstopped, not OOM killed here (i.e. no restart involved, just sigcont). this used to be instant before and gives a weird feeling of sluggishness. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1480654/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1585589] Re: drop upstart-sysv
** Changed in: upstart (Ubuntu) Status: Triaged => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upstart in Ubuntu. https://bugs.launchpad.net/bugs/1585589 Title: drop upstart-sysv Status in upstart package in Ubuntu: Fix Committed Bug description: I'm using Ubuntu 16.10 dev with init 1.33ubuntu2 and I'm noticing that it does now pre-depend on "systemd-sysv" instead of "systemd-sysv | upstart-sysv". Since init is essential and upstart-sysv conflicts with systemd-sysv this means it is not possible to install Upstart in a sane way anymore. In case Upstart is not supported anymore maybe all related packages should be removed from the yakkety repository then (since Upstart can't be installed anymore with apt for the reasons above) to avoid confusion. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1585589/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1585589] Re: drop upstart-sysv
** Branch linked: lp:~ubuntu-core-dev/upstart/ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to upstart in Ubuntu. https://bugs.launchpad.net/bugs/1585589 Title: drop upstart-sysv Status in upstart package in Ubuntu: Fix Committed Bug description: I'm using Ubuntu 16.10 dev with init 1.33ubuntu2 and I'm noticing that it does now pre-depend on "systemd-sysv" instead of "systemd-sysv | upstart-sysv". Since init is essential and upstart-sysv conflicts with systemd-sysv this means it is not possible to install Upstart in a sane way anymore. In case Upstart is not supported anymore maybe all related packages should be removed from the yakkety repository then (since Upstart can't be installed anymore with apt for the reasons above) to avoid confusion. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1585589/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594944] Re: Setup.exec() for existing account type results in blank full screen window
Hi Rodney, can you please provide steps on how to reproduce this? Additionally, it would be great if you could paste the output of OAU_LOGGING_LEVEL=2 OAU_DAEMON_TIMEOUT= online-accounts-service while reproducing this bug. ** Changed in: ubuntu-system-settings-online-accounts (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-system-settings- online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1594944 Title: Setup.exec() for existing account type results in blank full screen window Status in Canonical System Image: New Status in ubuntu-system-settings-online-accounts package in Ubuntu: Incomplete Bug description: If an account already exists, calling Setup.exec() again results in a blank window being overlaid on top of the application which made the request. There is no way to close this window. This API is what the online accounts integration in the scopes API relies upon, to allow logging in to accounts, and so we have come to rely upon this API as well in multiple places, as a means to log into the Ubuntu One account, when it is necessary to do so. However, due to this issue, the only way to reliably present a login window at an appropriate time, is to delete the account when it appears to have been invalidated by the server, and to then present the login window to create a new account. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1594944/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1510558] Re: ppa shortcut handler exception stops shortcut resolution
Fwiw, this causes a regression in the UI of add-apt-repository: https://bugs.launchpad.net/ubuntu/+source/software- properties/+bug/1594776 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1510558 Title: ppa shortcut handler exception stops shortcut resolution Status in software-properties package in Ubuntu: Fix Released Bug description: This build failure occurred: https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac /autopkgtest-xenial/xenial/i386/s/software- properties/20151026_184437@/log.gz While that's probably a temporary failure, it would still be better to log the exception and continue trying other shortcut handlers. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1510558/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594776] Re: add-apt-repository explodes on missing ppa
Fwiw, this is a regression caused by: https://bugs.launchpad.net/ubuntu/+source/software- properties/+bug/1510558 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1594776 Title: add-apt-repository explodes on missing ppa Status in software-properties package in Ubuntu: New Status in software-properties source package in Xenial: New Bug description: Just saw this on freshly updated Xenial. I think it's trying to be helpful and tell me what PPAs a particular LP team has published, but in the end it explodes: $ sudo add-apt-repository ppa:juju/next Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 102, in _get_https_content_py3 lp_page = urllib.request.urlopen(request, cafile=LAUNCHPAD_PPA_CERT) File "/usr/lib/python3.5/urllib/request.py", line 162, in urlopen return opener.open(url, data, timeout) File "/usr/lib/python3.5/urllib/request.py", line 471, in open response = meth(req, response) File "/usr/lib/python3.5/urllib/request.py", line 581, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python3.5/urllib/request.py", line 509, in error return self._call_chain(*args) File "/usr/lib/python3.5/urllib/request.py", line 443, in _call_chain result = func(*args) File "/usr/lib/python3.5/urllib/request.py", line 589, in http_error_default raise HTTPError(req.full_url, code, msg, hdrs, fp) urllib.error.HTTPError: HTTP Error 404: Not Found During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 327, in get_ppa_info ret = get_ppa_info_from_lp(user, ppa) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 92, in get_ppa_info_from_lp return get_info_from_lp(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 88, in get_info_from_lp return _get_https_content_py3(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 108, in _get_https_content_py3 raise PPAException("Error reading %s: %s" % (lp_url, reason), e) softwareproperties.ppa.PPAException: 'Error reading https://launchpad.net/api/1.0/~juju/+archive/ubuntu/next: Not Found' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 393, in shortcut_handler return PPAShortcutHandler(shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 356, in __init__ info = get_ppa_info(self.shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 339, in get_ppa_info _get_suggested_ppa_message(user, ppa)) softwareproperties.shortcuts.ShortcutException: Cannot add PPA: 'ppa:~juju/ubuntu/next'. The team named '~juju' has no PPA named 'ubuntu/next' Please choose from the following available PPAs: * '1.22': 1.22 Updates * '1.22-proposed': 1.22 Proposed * '1.23': 1.23 Updates * 'daily': Juju Daily * 'devel': juju devel packages * 'enablement': Juju Enablement * 'experimental': juju experimental packages * 'golang': juju-golang * 'proposed': juju proposed packages * 'stable': juju stable packages Error: 'ppa:juju/next' invalid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1594776/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594776] Re: add-apt-repository explodes on missing ppa
** Also affects: software-properties (Ubuntu Xenial) Importance: Undecided Status: New ** Patch added: "proposed fix" https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1594776/+attachment/4688498/+files/lp1594776-shortcuts.diff -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1594776 Title: add-apt-repository explodes on missing ppa Status in software-properties package in Ubuntu: New Status in software-properties source package in Xenial: New Bug description: Just saw this on freshly updated Xenial. I think it's trying to be helpful and tell me what PPAs a particular LP team has published, but in the end it explodes: $ sudo add-apt-repository ppa:juju/next Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 102, in _get_https_content_py3 lp_page = urllib.request.urlopen(request, cafile=LAUNCHPAD_PPA_CERT) File "/usr/lib/python3.5/urllib/request.py", line 162, in urlopen return opener.open(url, data, timeout) File "/usr/lib/python3.5/urllib/request.py", line 471, in open response = meth(req, response) File "/usr/lib/python3.5/urllib/request.py", line 581, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python3.5/urllib/request.py", line 509, in error return self._call_chain(*args) File "/usr/lib/python3.5/urllib/request.py", line 443, in _call_chain result = func(*args) File "/usr/lib/python3.5/urllib/request.py", line 589, in http_error_default raise HTTPError(req.full_url, code, msg, hdrs, fp) urllib.error.HTTPError: HTTP Error 404: Not Found During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 327, in get_ppa_info ret = get_ppa_info_from_lp(user, ppa) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 92, in get_ppa_info_from_lp return get_info_from_lp(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 88, in get_info_from_lp return _get_https_content_py3(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 108, in _get_https_content_py3 raise PPAException("Error reading %s: %s" % (lp_url, reason), e) softwareproperties.ppa.PPAException: 'Error reading https://launchpad.net/api/1.0/~juju/+archive/ubuntu/next: Not Found' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 393, in shortcut_handler return PPAShortcutHandler(shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 356, in __init__ info = get_ppa_info(self.shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 339, in get_ppa_info _get_suggested_ppa_message(user, ppa)) softwareproperties.shortcuts.ShortcutException: Cannot add PPA: 'ppa:~juju/ubuntu/next'. The team named '~juju' has no PPA named 'ubuntu/next' Please choose from the following available PPAs: * '1.22': 1.22 Updates * '1.22-proposed': 1.22 Proposed * '1.23': 1.23 Updates * 'daily': Juju Daily * 'devel': juju devel packages * 'enablement': Juju Enablement * 'experimental': juju experimental packages * 'golang': juju-golang * 'proposed': juju proposed packages * 'stable': juju stable packages Error: 'ppa:juju/next' invalid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1594776/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594776] Re: add-apt-repository explodes on missing ppa
With this patch the desired behavior is restored: """ $ fakeroot ./add-apt-repository ppa:juju/next Cannot add PPA: 'ppa:~juju/ubuntu/next'. The team named '~juju' has no PPA named 'ubuntu/next' Please choose from the following available PPAs: * '1.22': 1.22 Updates * '1.22-proposed': 1.22 Proposed * '1.23': 1.23 Updates * 'daily': Juju Daily * 'devel': juju devel packages * 'enablement': Juju Enablement * 'experimental': juju experimental packages * 'golang': juju-golang * 'proposed': juju proposed packages * 'stable': juju stable packages """ -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1594776 Title: add-apt-repository explodes on missing ppa Status in software-properties package in Ubuntu: New Status in software-properties source package in Xenial: New Bug description: Just saw this on freshly updated Xenial. I think it's trying to be helpful and tell me what PPAs a particular LP team has published, but in the end it explodes: $ sudo add-apt-repository ppa:juju/next Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 102, in _get_https_content_py3 lp_page = urllib.request.urlopen(request, cafile=LAUNCHPAD_PPA_CERT) File "/usr/lib/python3.5/urllib/request.py", line 162, in urlopen return opener.open(url, data, timeout) File "/usr/lib/python3.5/urllib/request.py", line 471, in open response = meth(req, response) File "/usr/lib/python3.5/urllib/request.py", line 581, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python3.5/urllib/request.py", line 509, in error return self._call_chain(*args) File "/usr/lib/python3.5/urllib/request.py", line 443, in _call_chain result = func(*args) File "/usr/lib/python3.5/urllib/request.py", line 589, in http_error_default raise HTTPError(req.full_url, code, msg, hdrs, fp) urllib.error.HTTPError: HTTP Error 404: Not Found During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 327, in get_ppa_info ret = get_ppa_info_from_lp(user, ppa) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 92, in get_ppa_info_from_lp return get_info_from_lp(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 88, in get_info_from_lp return _get_https_content_py3(lp_url) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 108, in _get_https_content_py3 raise PPAException("Error reading %s: %s" % (lp_url, reason), e) softwareproperties.ppa.PPAException: 'Error reading https://launchpad.net/api/1.0/~juju/+archive/ubuntu/next: Not Found' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 393, in shortcut_handler return PPAShortcutHandler(shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 356, in __init__ info = get_ppa_info(self.shortcut) File "/usr/lib/python3/dist-packages/softwareproperties/ppa.py", line 339, in get_ppa_info _get_suggested_ppa_message(user, ppa)) softwareproperties.shortcuts.ShortcutException: Cannot add PPA: 'ppa:~juju/ubuntu/next'. The team named '~juju' has no PPA named 'ubuntu/next' Please choose from the following available PPAs: * '1.22': 1.22 Updates * '1.22-proposed': 1.22 Proposed * '1.23': 1.23 Updates * 'daily': Juju Daily * 'devel': juju devel packages * 'enablement': Juju Enablement * 'experimental': juju experimental packages * 'golang': juju-golang * 'proposed': juju proposed packages * 'stable': juju stable packages Error: 'ppa:juju/next' invalid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1594776/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595182] Re: Sync dh-python 2.20160609 (main) from Debian unstable (main)
This bug was fixed in the package dh-python - 2.20160609 Sponsored for LocutusOfBorg (costamagnagianfranco) --- dh-python (2.20160609) unstable; urgency=medium [ Piotr Ożarowski ] * pybuild's distutils build plugin: use force option at install stage to avoid non-deterministic shebangs (closes: 804339) * pybuild.pm: - fail with a message about missing interpreter package in Build-Depends if there's none (closes: 819353) - do not pass --dir to pybuild if it's equal to current directory (to make PYBUILD_DIR override possible) * dh_pypy: fix dpkg search template to find more pypy egg-info packages * dh_py*: - add interpreter to Depends if .so file is detected in private dir only if python{,3,all,3-all}-dev is in Build-Depends (closes: 811083) - use Build-Depends' minimum version for required libraries if other methods to detect it failed (closes: 791433) - --requires now tries to find given file in debian/pkg-name/ dir (`--requires foo/bar.txt` will try debian/python3-spam/foo/bar.txt and fall back to ./foo/bar.txt) - print an error if there's no package to act on - fix handling symlinks while moving files to common directory (closes: 801719) [ Ondřej Nový ] * When depends on python{3,}-setuptools-scm, set SETUPTOOLS_SCM_PRETEND_VERSION to upstream version * Standards-Version is 3.9.8 now (no changes needed) * Changed Vcs-* URLs to https protocol [ James Page ] * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). -- Piotr OżarowskiThu, 09 Jun 2016 18:37:46 +0200 ** Changed in: dh-python (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dh-python in Ubuntu. https://bugs.launchpad.net/bugs/1595182 Title: Sync dh-python 2.20160609 (main) from Debian unstable (main) Status in dh-python package in Ubuntu: Fix Released Bug description: Please sync dh-python 2.20160609 (main) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). * Merge from unstable. Remaining changes: - Add python3.5 as a supported python version. Python3.4 is gone. Goodbye Python3.4 Debian has Python3.5 by default, there is no need to have a delta anymore. The != dependency stuff is fixed in Debian. This should unblock python-coverage build failure (tested locally and works ok on xenial) Changelog entries since current yakkety version 2.20151103ubuntu2: dh-python (2.20160609) unstable; urgency=medium [ Piotr Ożarowski ] * pybuild's distutils build plugin: use force option at install stage to avoid non-deterministic shebangs (closes: 804339) * pybuild.pm: - fail with a message about missing interpreter package in Build-Depends if there's none (closes: 819353) - do not pass --dir to pybuild if it's equal to current directory (to make PYBUILD_DIR override possible) * dh_pypy: fix dpkg search template to find more pypy egg-info packages * dh_py*: - add interpreter to Depends if .so file is detected in private dir only if python{,3,all,3-all}-dev is in Build-Depends (closes: 811083) - use Build-Depends' minimum version for required libraries if other methods to detect it failed (closes: 791433) - --requires now tries to find given file in debian/pkg-name/ dir (`--requires foo/bar.txt` will try debian/python3-spam/foo/bar.txt and fall back to ./foo/bar.txt) - print an error if there's no package to act on - fix handling symlinks while moving files to common directory (closes: 801719) [ Ondřej Nový ] * When depends on python{3,}-setuptools-scm, set SETUPTOOLS_SCM_PRETEND_VERSION to upstream version * Standards-Version is 3.9.8 now (no changes needed) * Changed Vcs-* URLs to https protocol [ James Page ] * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). -- Piotr Ożarowski Thu, 09 Jun 2016 18:37:46 +0200 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dh-python/+bug/1595182/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1590765] Re: OSK flickers and buttons are sometimes invisble
workaround committed to mir 0.23.1 and released to images. Now working on proper fix for lp:mir ** Changed in: mir Status: Confirmed => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1590765 Title: OSK flickers and buttons are sometimes invisble Status in Canonical System Image: Fix Committed Status in Mir: In Progress Status in Mir 0.23 series: Fix Released Status in mir package in Ubuntu: Fix Released Status in ubuntu-keyboard package in Ubuntu: Invalid Status in unity8 package in Ubuntu: Invalid Bug description: Latest rc-propoced image r348 for BQ E5, OSK kb buttons are often invisible (pressing white part will refresh it and buttons are visible again) and OSK flickers a lot. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1590765/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1480654] Re: [regression] Input focus delay after switching app back into focus since OTA5
so shall we refine this bug or spawn a new one? sounds like this is now beyond the original regression that was solved -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1480654 Title: [regression] Input focus delay after switching app back into focus since OTA5 Status in Canonical System Image: Confirmed Status in Mir: Fix Released Status in mir package in Ubuntu: Fix Released Status in qtmir package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: i am not sure if it started with OTA4 or OTA5 but since one of the recent OTA upgrades my arale takes between half a second and one second before an app takes input again when one switches it from background back into focus. i'm talking about apps that were only sigstopped, not OOM killed here (i.e. no restart involved, just sigcont). this used to be instant before and gives a weird feeling of sluggishness. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1480654/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1536353] Re: [regression] Printer drivers install is broken as lsb package is not available anymore
Arup, yes, you will not need the Trusty repos any more. If you want to verify this SRU, make sue that when you add xenial- proposed that you remove all Trusty repos. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lsb in Ubuntu. https://bugs.launchpad.net/bugs/1536353 Title: [regression] Printer drivers install is broken as lsb package is not available anymore Status in cups-filters package in Ubuntu: Fix Released Status in epson-inkjet-printer-escpr package in Ubuntu: Fix Released Status in lsb package in Ubuntu: In Progress Status in system-config-printer package in Ubuntu: Invalid Status in cups-filters source package in Xenial: Fix Released Status in epson-inkjet-printer-escpr source package in Xenial: Fix Released Status in lsb source package in Xenial: In Progress Status in system-config-printer source package in Xenial: Invalid Bug description: [SRU justification] Previous releases were compatible with third-party printer drivers provided in LSB package format (and also as .deb packages depending on the lsb package). As of 16.04, because the LSB specifies ABIs for various libraries that are no longer supported in Ubuntu as obsolete, the packages for the lsb modules have been dropped in both Debian and Ubuntu. This includes dropping of lsb-core, which is the component which provides the LSB-mandated ELF loader path - without which no lsb executable will work. This SRU will restore the bare minimum of LSB compatibility necessary to support known third-party LSB printer driver packages on Ubuntu 16.04. [Regression potential] The reintroduced 'lsb' binary package is known to not fully satisfy the requirements for a complete LSB-compliant system. This is a regression vs. Ubuntu 14.04; so anyone using LSB packages on Ubuntu 14.04 who upgrades to Ubuntu 16.04 may have the upgrade succeed without any warning from the package manager. As there are very few lsb packages in use in the wild, this is considered an acceptable regression, especially as this will land before the first 16.04 point release. [Test case] 1. Download the epsion 201106w printer driver package from http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-201106w_1.0.1-1lsb3.2_amd64.deb 2. Install the package and confirm that its dependencies are not satisfiable. 3. Enable xenial-proposed. 4. Install the package again and confirm that the dependencies are satisfied. 5. Verify that /opt/epson-inkjet-printer-201106w/cups/lib/filter/epson_inkjet_printer_filter can be run without errors about missing lsb ld.so or missing libraries. Starting with Xenial, lsb compatibility packages were dropped (besides lsb-release and lsb-base): lsb (9.20150826) unstable; urgency=low * Drop all the LSB compatibility packages besides lsb-release and lsb-base - Drop packages-availability checking in lsb-release - Truncate README.Debian to a minimum - Document this in lsb-base.NEWS.Debian * Change the versioning number to avoid any ambiguity; use joeyh's version.date, with version being Debian next stable's -- Didier RaboudWed, 26 Aug 2015 12:00:00 +0200 The problem is that downloadable printer drivers (like the ones from Openprinting, but also from other available providers) that are suggested when installing a printer on Ubuntu depends on lsb, which is not available anymore: epson-inkjet-printer-201106w: Dépend: lsb (>=3.2) but it is not installable This triggers a regression where it is not possible to setup a printer this way (downloading a driver where no local driver is available) anymore. I see two possible solutions: - Add a proper replaces field to one of the remaining lsb-* packages, to hopefully fix missing lsb package (maybe it would be useful to also replace other compability packages that are not built anymore). - Re-introduce LSB compatibility packages, but that might be an overkill. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups-filters/+bug/1536353/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595182] Re: Sync dh-python 2.20160609 (main) from Debian unstable (main)
** Changed in: dh-python (Ubuntu) Status: New => In Progress ** Changed in: dh-python (Ubuntu) Assignee: (unassigned) => Graham Inggs (ginggs) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dh-python in Ubuntu. https://bugs.launchpad.net/bugs/1595182 Title: Sync dh-python 2.20160609 (main) from Debian unstable (main) Status in dh-python package in Ubuntu: In Progress Bug description: Please sync dh-python 2.20160609 (main) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). * Merge from unstable. Remaining changes: - Add python3.5 as a supported python version. Python3.4 is gone. Goodbye Python3.4 Debian has Python3.5 by default, there is no need to have a delta anymore. The != dependency stuff is fixed in Debian. This should unblock python-coverage build failure (tested locally and works ok on xenial) Changelog entries since current yakkety version 2.20151103ubuntu2: dh-python (2.20160609) unstable; urgency=medium [ Piotr Ożarowski ] * pybuild's distutils build plugin: use force option at install stage to avoid non-deterministic shebangs (closes: 804339) * pybuild.pm: - fail with a message about missing interpreter package in Build-Depends if there's none (closes: 819353) - do not pass --dir to pybuild if it's equal to current directory (to make PYBUILD_DIR override possible) * dh_pypy: fix dpkg search template to find more pypy egg-info packages * dh_py*: - add interpreter to Depends if .so file is detected in private dir only if python{,3,all,3-all}-dev is in Build-Depends (closes: 811083) - use Build-Depends' minimum version for required libraries if other methods to detect it failed (closes: 791433) - --requires now tries to find given file in debian/pkg-name/ dir (`--requires foo/bar.txt` will try debian/python3-spam/foo/bar.txt and fall back to ./foo/bar.txt) - print an error if there's no package to act on - fix handling symlinks while moving files to common directory (closes: 801719) [ Ondřej Nový ] * When depends on python{3,}-setuptools-scm, set SETUPTOOLS_SCM_PRETEND_VERSION to upstream version * Standards-Version is 3.9.8 now (no changes needed) * Changed Vcs-* URLs to https protocol [ James Page ] * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). -- Piotr OżarowskiThu, 09 Jun 2016 18:37:46 +0200 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dh-python/+bug/1595182/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595182] [NEW] Sync dh-python 2.20160609 (main) from Debian unstable (main)
Public bug reported: Please sync dh-python 2.20160609 (main) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). * Merge from unstable. Remaining changes: - Add python3.5 as a supported python version. Python3.4 is gone. Goodbye Python3.4 Debian has Python3.5 by default, there is no need to have a delta anymore. The != dependency stuff is fixed in Debian. This should unblock python-coverage build failure (tested locally and works ok on xenial) Changelog entries since current yakkety version 2.20151103ubuntu2: dh-python (2.20160609) unstable; urgency=medium [ Piotr Ożarowski ] * pybuild's distutils build plugin: use force option at install stage to avoid non-deterministic shebangs (closes: 804339) * pybuild.pm: - fail with a message about missing interpreter package in Build-Depends if there's none (closes: 819353) - do not pass --dir to pybuild if it's equal to current directory (to make PYBUILD_DIR override possible) * dh_pypy: fix dpkg search template to find more pypy egg-info packages * dh_py*: - add interpreter to Depends if .so file is detected in private dir only if python{,3,all,3-all}-dev is in Build-Depends (closes: 811083) - use Build-Depends' minimum version for required libraries if other methods to detect it failed (closes: 791433) - --requires now tries to find given file in debian/pkg-name/ dir (`--requires foo/bar.txt` will try debian/python3-spam/foo/bar.txt and fall back to ./foo/bar.txt) - print an error if there's no package to act on - fix handling symlinks while moving files to common directory (closes: 801719) [ Ondřej Nový ] * When depends on python{3,}-setuptools-scm, set SETUPTOOLS_SCM_PRETEND_VERSION to upstream version * Standards-Version is 3.9.8 now (no changes needed) * Changed Vcs-* URLs to https protocol [ James Page ] * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). -- Piotr OżarowskiThu, 09 Jun 2016 18:37:46 +0200 ** Affects: dh-python (Ubuntu) Importance: Wishlist Assignee: Graham Inggs (ginggs) Status: In Progress ** Changed in: dh-python (Ubuntu) Importance: Undecided => Wishlist -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dh-python in Ubuntu. https://bugs.launchpad.net/bugs/1595182 Title: Sync dh-python 2.20160609 (main) from Debian unstable (main) Status in dh-python package in Ubuntu: In Progress Bug description: Please sync dh-python 2.20160609 (main) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). * Merge from unstable. Remaining changes: - Add python3.5 as a supported python version. Python3.4 is gone. Goodbye Python3.4 Debian has Python3.5 by default, there is no need to have a delta anymore. The != dependency stuff is fixed in Debian. This should unblock python-coverage build failure (tested locally and works ok on xenial) Changelog entries since current yakkety version 2.20151103ubuntu2: dh-python (2.20160609) unstable; urgency=medium [ Piotr Ożarowski ] * pybuild's distutils build plugin: use force option at install stage to avoid non-deterministic shebangs (closes: 804339) * pybuild.pm: - fail with a message about missing interpreter package in Build-Depends if there's none (closes: 819353) - do not pass --dir to pybuild if it's equal to current directory (to make PYBUILD_DIR override possible) * dh_pypy: fix dpkg search template to find more pypy egg-info packages * dh_py*: - add interpreter to Depends if .so file is detected in private dir only if python{,3,all,3-all}-dev is in Build-Depends (closes: 811083) - use Build-Depends' minimum version for required libraries if other methods to detect it failed (closes: 791433) - --requires now tries to find given file in debian/pkg-name/ dir (`--requires foo/bar.txt` will try debian/python3-spam/foo/bar.txt and fall back to ./foo/bar.txt) - print an error if there's no package to act on - fix handling symlinks while moving files to common directory (closes: 801719) [ Ondřej Nový ] * When depends on python{3,}-setuptools-scm, set SETUPTOOLS_SCM_PRETEND_VERSION to upstream version * Standards-Version is 3.9.8 now (no changes needed) * Changed Vcs-* URLs to https protocol [ James Page ] * dhpython/pydist.py: Ensure that != dependency versions are ignored (LP: #1581065). -- Piotr Ożarowski Thu, 09 Jun 2016 18:37:46 +0200 To manage notifications about this bug
[Touch-packages] [Bug 1595177] Re: [SRU template] Update apt/xenial to 1.2.14
** Description changed: + (This is a template for now, so I can close the bug in the 1.2.14 + upload) + [Impact] - We intend to upload APT 1.2.14 to xenial under the new "micro upstream release" policy. + We intend to upload APT 1.2.14 to xenial under the new "micro upstream release" policy. Apart from fixing bug 1573547, it also updates translations fixes the following other bugs: [[1.2.13]] Segmentation fault fixes: * fail instead of segfault on unreadable config files (Closes: 824503) Fixes for 3rd party programs using libapt and C++ locale API: * prevent C++ locale number formatting in text APIs (Closes: #825396) Fix for hurd (not really affecting us here, but upstream): * apt-key: change to / before find to satisfy its CWD needs. Thanks to Samuel Thibault for 'finding' the culprit! (Closes: 826043) Leak fixes: * do not hang on piped input in PipedFileFdPrivate * don't leak an FD in lz4 (de)compression * don't leak FD in AutoProxyDetect command return parsing [[1.2.14]] Regression fix from 1.2.13: - * do not error if auto-detect-proxy cmd has no output (Closes: 827713) + * do not error if auto-detect-proxy cmd has no output (Closes: 827713) Huge apt-ftparchive performance regression fix from 1.1: - * Reinstate caching of file hashes in apt-ftparchive (Closes: #806924) + * Reinstate caching of file hashes in apt-ftparchive (Closes: #806924) Tiny bug fixes, about 2 lines each: - * source: if download is skipped, don't try to unpack - * ensure filesize of deb is included in the hashes list + * source: if download is skipped, don't try to unpack + * ensure filesize of deb is included in the hashes list [Test case] The releases follow new upstream micro release rule and thus are assumed to be tested by our integration test suite. There are two exceptions which cannot be tested: * prevent C++ locale number formatting in text APIs * apt-key: change to / before find to satisfy its CWD needs The first has no affected code in the archive (but maybe 3rd party code), the second only affects hurd. [Regression Potential] Very low. The release has been tested by a thorough integration test suite on Travis CI, Debian autopkgtests, and has been in Debian unstable since 2016-06-22. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1595177 Title: [SRU template] Update apt/xenial to 1.2.14 Status in apt package in Ubuntu: New Bug description: (This is a template for now, so I can close the bug in the 1.2.14 upload) [Impact] We intend to upload APT 1.2.14 to xenial under the new "micro upstream release" policy. Apart from fixing bug 1573547, it also updates translations fixes the following other bugs: [[1.2.13]] Segmentation fault fixes: * fail instead of segfault on unreadable config files (Closes: 824503) Fixes for 3rd party programs using libapt and C++ locale API: * prevent C++ locale number formatting in text APIs (Closes: #825396) Fix for hurd (not really affecting us here, but upstream): * apt-key: change to / before find to satisfy its CWD needs. Thanks to Samuel Thibault for 'finding' the culprit! (Closes: 826043) Leak fixes: * do not hang on piped input in PipedFileFdPrivate * don't leak an FD in lz4 (de)compression * don't leak FD in AutoProxyDetect command return parsing [[1.2.14]] Regression fix from 1.2.13: * do not error if auto-detect-proxy cmd has no output (Closes: 827713) Huge apt-ftparchive performance regression fix from 1.1: * Reinstate caching of file hashes in apt-ftparchive (Closes: #806924) Tiny bug fixes, about 2 lines each: * source: if download is skipped, don't try to unpack * ensure filesize of deb is included in the hashes list [Test case] The releases follow new upstream micro release rule and thus are assumed to be tested by our integration test suite. There are two exceptions which cannot be tested: * prevent C++ locale number formatting in text APIs * apt-key: change to / before find to satisfy its CWD needs The first has no affected code in the archive (but maybe 3rd party code), the second only affects hurd. [Regression Potential] Very low. The release has been tested by a thorough integration test suite on Travis CI, Debian autopkgtests, and has been in Debian unstable since 2016-06-22. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1595177/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595177] [NEW] [SRU template] Update apt/xenial to 1.2.14
Public bug reported: [Impact] We intend to upload APT 1.2.14 to xenial under the new "micro upstream release" policy. Apart from fixing bug 1573547, it also updates translations fixes the following other bugs: [[1.2.13]] Segmentation fault fixes: * fail instead of segfault on unreadable config files (Closes: 824503) Fixes for 3rd party programs using libapt and C++ locale API: * prevent C++ locale number formatting in text APIs (Closes: #825396) Fix for hurd (not really affecting us here, but upstream): * apt-key: change to / before find to satisfy its CWD needs. Thanks to Samuel Thibault for 'finding' the culprit! (Closes: 826043) Leak fixes: * do not hang on piped input in PipedFileFdPrivate * don't leak an FD in lz4 (de)compression * don't leak FD in AutoProxyDetect command return parsing [[1.2.14]] Regression fix from 1.2.13: * do not error if auto-detect-proxy cmd has no output (Closes: 827713) Huge apt-ftparchive performance regression fix from 1.1: * Reinstate caching of file hashes in apt-ftparchive (Closes: #806924) Tiny bug fixes, about 2 lines each: * source: if download is skipped, don't try to unpack * ensure filesize of deb is included in the hashes list [Test case] The releases follow new upstream micro release rule and thus are assumed to be tested by our integration test suite. There are two exceptions which cannot be tested: * prevent C++ locale number formatting in text APIs * apt-key: change to / before find to satisfy its CWD needs The first has no affected code in the archive (but maybe 3rd party code), the second only affects hurd. [Regression Potential] Very low. The release has been tested by a thorough integration test suite on Travis CI, Debian autopkgtests, and has been in Debian unstable since 2016-06-22. ** Affects: apt (Ubuntu) Importance: Undecided Status: New ** Summary changed: - [SRU] Update apt/xenial to 1.2.14 + [SRU template] Update apt/xenial to 1.2.14 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1595177 Title: [SRU template] Update apt/xenial to 1.2.14 Status in apt package in Ubuntu: New Bug description: [Impact] We intend to upload APT 1.2.14 to xenial under the new "micro upstream release" policy. Apart from fixing bug 1573547, it also updates translations fixes the following other bugs: [[1.2.13]] Segmentation fault fixes: * fail instead of segfault on unreadable config files (Closes: 824503) Fixes for 3rd party programs using libapt and C++ locale API: * prevent C++ locale number formatting in text APIs (Closes: #825396) Fix for hurd (not really affecting us here, but upstream): * apt-key: change to / before find to satisfy its CWD needs. Thanks to Samuel Thibault for 'finding' the culprit! (Closes: 826043) Leak fixes: * do not hang on piped input in PipedFileFdPrivate * don't leak an FD in lz4 (de)compression * don't leak FD in AutoProxyDetect command return parsing [[1.2.14]] Regression fix from 1.2.13: * do not error if auto-detect-proxy cmd has no output (Closes: 827713) Huge apt-ftparchive performance regression fix from 1.1: * Reinstate caching of file hashes in apt-ftparchive (Closes: #806924) Tiny bug fixes, about 2 lines each: * source: if download is skipped, don't try to unpack * ensure filesize of deb is included in the hashes list [Test case] The releases follow new upstream micro release rule and thus are assumed to be tested by our integration test suite. There are two exceptions which cannot be tested: * prevent C++ locale number formatting in text APIs * apt-key: change to / before find to satisfy its CWD needs The first has no affected code in the archive (but maybe 3rd party code), the second only affects hurd. [Regression Potential] Very low. The release has been tested by a thorough integration test suite on Travis CI, Debian autopkgtests, and has been in Debian unstable since 2016-06-22. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1595177/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1573547] Re: Apt's bash completion is incomplete
Moving the rest of the SRU to bug 1595177 ** Description changed: *** Original bug report *** "build-dep" and "clean" apt options are missing in /usr/share/bash- completion/completions/apt file. Patch attached. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: apt 1.2.10ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Fri Apr 22 14:25:54 2016 InstallationDate: Installed on 2016-04-21 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: apt UpgradeStatus: No upgrade log present (probably fresh install) *** SRU part *** - [Impact] - We intend to upload APT 1.2.13 to xenial under the new "micro upstream release" policy. Apart from fixing this bug, it also updates translations fixes the following other bugs: - - Segmentation fault fixes: - * fail instead of segfault on unreadable config files (Closes: 824503) - - Fixes for 3rd party programs using libapt and C++ locale API: - * prevent C++ locale number formatting in text APIs (Closes: #825396) - - Fix for hurd (not really affecting us here, but upstream): - * apt-key: change to / before find to satisfy its CWD needs. - Thanks to Samuel Thibault for 'finding' the culprit! (Closes: 826043) - - Leak fixes: - * do not hang on piped input in PipedFileFdPrivate - * don't leak an FD in lz4 (de)compression - * don't leak FD in AutoProxyDetect command return parsing - [Test case] - Check that options like build-dep and clean work. For the other fixed issues, those follow the new upstream micro release rule and thus are assumed to be tested by our integration test suite. There are two exceptions which cannot be tested: - - * prevent C++ locale number formatting in text APIs - * apt-key: change to / before find to satisfy its CWD needs - - The first has no affected code in the archive (but maybe 3rd party - code), the second only affects hurd. - - [Regression Potential] - Very low. The release has been tested by a thorough integration test suite on Travis CI, Debian autopkgtests, and has been in Debian unstable since 2016-06-12. + Check that options like build-dep and clean work. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1573547 Title: Apt's bash completion is incomplete Status in apt package in Ubuntu: Fix Committed Bug description: *** Original bug report *** "build-dep" and "clean" apt options are missing in /usr/share/bash- completion/completions/apt file. Patch attached. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: apt 1.2.10ubuntu1 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Fri Apr 22 14:25:54 2016 InstallationDate: Installed on 2016-04-21 (0 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: apt UpgradeStatus: No upgrade log present (probably fresh install) *** SRU part *** [Test case] Check that options like build-dep and clean work. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1573547/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1538471] Re: scope-runner-dbus.py assert failure: *** Error in `/usr/bin/python3': free(): invalid next size (fast): 0x0000000001ca17b0 ***
** Changed in: libunity (Ubuntu) Status: Invalid => Fix Released ** Changed in: libunity (Ubuntu) Assignee: (unassigned) => Artit Thongsupan (artittoe000172) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libunity in Ubuntu. https://bugs.launchpad.net/bugs/1538471 Title: scope-runner-dbus.py assert failure: *** Error in `/usr/bin/python3': free(): invalid next size (fast): 0x01ca17b0 *** Status in Ubuntu Kylin: New Status in libunity package in Ubuntu: Fix Released Status in pygobject package in Ubuntu: Fix Released Bug description: No idea what happened. ProblemType: Crash DistroRelease: Ubuntu 16.04 Package: unity-scopes-runner 7.1.4+15.10.20151002-0ubuntu2 ProcVersionSignature: Ubuntu 4.3.0-7.18-generic 4.3.3 Uname: Linux 4.3.0-7-generic x86_64 ApportVersion: 2.19.4-0ubuntu1 Architecture: amd64 AssertionMessage: *** Error in `/usr/bin/python3': free(): invalid next size (fast): 0x01ca17b0 *** CrashCounter: 1 CurrentDesktop: Unity Date: Wed Jan 27 10:41:54 2016 Dependencies: ExecutablePath: /usr/share/unity-scopes/scope-runner-dbus.py InstallationDate: Installed on 2015-04-30 (271 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) InterpreterPath: /usr/bin/python3.5 PackageArchitecture: all ProcCmdline: /usr/bin/python3 /usr/share/unity-scopes/scope-runner-dbus.py -s info/calculator.scope Signal: 6 SourcePackage: libunity StacktraceTop: __libc_message (do_abort=do_abort@entry=1, fmt=fmt@entry=0x7fd789926128 "*** Error in `%s': %s: 0x%s ***\n") at ../sysdeps/posix/libc_fatal.c:175 malloc_printerr (ptr=, str=0x7fd7899261a0 "free(): invalid next size (fast)", action=1) at malloc.c:4965 _int_free (av=, p=, have_lock=0) at malloc.c:3834 __GI___libc_free (mem=) at malloc.c:2950 ?? () from /usr/lib/python3/dist-packages/gi/_gi.cpython-35m-x86_64-linux-gnu.so SystemImageInfo: Error: command ['system-image-cli', '-i'] failed with exit code 2: Title: scope-runner-dbus.py assert failure: *** Error in `/usr/bin/python3': free(): invalid next size (fast): 0x01ca17b0 *** UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dip libvirtd lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntukylin/+bug/1538471/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1594198] Re: Terminal app crashes with "Failed to load libGLESv2"
** Branch linked: lp:~gerboland/qtubuntu/eglconvenience-retry -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1594198 Title: Terminal app crashes with "Failed to load libGLESv2" Status in Canonical System Image: Fix Committed Status in qtubuntu package in Ubuntu: Fix Released Bug description: Most likely due to [1] (checking), terminal app crashes on startup, printing: > Failed to load libGLESv2 An example OOPS can be seen under [2]. [1] https://code.launchpad.net/~gerboland/qtubuntu/adopt-more-eglconvenience2/+merge/295248 [2] https://errors.ubuntu.com/oops/020da136-3673-11e6-9055-fa163eec78fa ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: qtubuntu-android 0.62+15.04.20160527.1-0ubuntu1 Uname: Linux 3.10.100-user-01767-gf5aa556-dirty aarch64 ApportVersion: 2.17.2-0ubuntu1.3touch1 Architecture: armhf Date: Mon Jun 20 01:05:39 2016 InstallationDate: Installed on 2016-06-18 (1 days ago) InstallationMedia: Ubuntu 15.04 - armhf (20160618-020304) SourcePackage: qtubuntu UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1594198/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1590765] Re: OSK flickers and buttons are sometimes invisble
** Changed in: mir/0.23 Status: In Progress => Fix Released ** Changed in: mir Assignee: (unassigned) => Kevin DuBois (kdub) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-keyboard in Ubuntu. https://bugs.launchpad.net/bugs/1590765 Title: OSK flickers and buttons are sometimes invisble Status in Canonical System Image: Fix Committed Status in Mir: Confirmed Status in Mir 0.23 series: Fix Released Status in mir package in Ubuntu: Fix Released Status in ubuntu-keyboard package in Ubuntu: Invalid Status in unity8 package in Ubuntu: Invalid Bug description: Latest rc-propoced image r348 for BQ E5, OSK kb buttons are often invisible (pressing white part will refresh it and buttons are visible again) and OSK flickers a lot. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1590765/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1595163] [NEW] package libjpeg-turbo8-dev (not installed) failed to install/upgrade: intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev
Public bug reported: sudo apt install libjpeg-turbo8-dev after sudo apt install libjpeg9-dev ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libjpeg-turbo8-dev (not installed) ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.1-0ubuntu2.1 AptOrdering: libjpeg-turbo8-dev: Install libjpeg-turbo8-dev: Configure NULL: ConfigurePending Architecture: amd64 Date: Wed Jun 22 14:21:14 2016 DpkgTerminalLog: Preparando para desempaquetar .../libjpeg-turbo8-dev_1.4.2-0ubuntu3_amd64.deb ... Desempaquetando libjpeg-turbo8-dev:amd64 (1.4.2-0ubuntu3) ... dpkg: error al procesar el archivo /var/cache/apt/archives/libjpeg-turbo8-dev_1.4.2-0ubuntu3_amd64.deb (--unpack): intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev:amd64 1:9b-1ubuntu1 ErrorMessage: intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev:amd64 1:9b-1ubuntu1 InstallationDate: Installed on 2016-06-17 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.12~ubuntu16.04.1 SourcePackage: libjpeg-turbo Title: package libjpeg-turbo8-dev (not installed) failed to install/upgrade: intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev:amd64 1:9b-1ubuntu1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: libjpeg-turbo (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libjpeg-turbo in Ubuntu. https://bugs.launchpad.net/bugs/1595163 Title: package libjpeg-turbo8-dev (not installed) failed to install/upgrade: intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev:amd64 1:9b-1ubuntu1 Status in libjpeg-turbo package in Ubuntu: New Bug description: sudo apt install libjpeg-turbo8-dev after sudo apt install libjpeg9-dev ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libjpeg-turbo8-dev (not installed) ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia ApportVersion: 2.20.1-0ubuntu2.1 AptOrdering: libjpeg-turbo8-dev: Install libjpeg-turbo8-dev: Configure NULL: ConfigurePending Architecture: amd64 Date: Wed Jun 22 14:21:14 2016 DpkgTerminalLog: Preparando para desempaquetar .../libjpeg-turbo8-dev_1.4.2-0ubuntu3_amd64.deb ... Desempaquetando libjpeg-turbo8-dev:amd64 (1.4.2-0ubuntu3) ... dpkg: error al procesar el archivo /var/cache/apt/archives/libjpeg-turbo8-dev_1.4.2-0ubuntu3_amd64.deb (--unpack): intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev:amd64 1:9b-1ubuntu1 ErrorMessage: intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev:amd64 1:9b-1ubuntu1 InstallationDate: Installed on 2016-06-17 (4 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.12~ubuntu16.04.1 SourcePackage: libjpeg-turbo Title: package libjpeg-turbo8-dev (not installed) failed to install/upgrade: intentando sobreescribir `/usr/include/jerror.h', que está también en el paquete libjpeg9-dev:amd64 1:9b-1ubuntu1 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libjpeg-turbo/+bug/1595163/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp