date:20190226

[Touch-packages] [Bug 1002978] Re: [meta-bug] Inverted Internal microphone (phase inversion)

2019-02-26 Thread Launchpad Bug Tracker

[Expired for alsa-driver (Ubuntu) because there has been no activity for
60 days.]

** Changed in: alsa-driver (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1002978

Title:
  [meta-bug] Inverted Internal microphone (phase inversion)

Status in alsa-driver package in Ubuntu:
  Expired

Bug description:
  This is a metabug for all machines that are having phase inverted
  internal microphones.

  If your internal mic is either completely silent (no signal), or you
  can possibly pick a very small sound, with much background noise, even
  though you have set gain to maximum, there is something you could try.

  Install the pavucontrol application, start it and go to the "Input Devices" 
tab. Unlock the channels (there is a keylock icon), then mute the right channel 
while keeping the left channel at the volume you want.
  If the internal mic is now working correctly, you have an inverted internal 
mic, so that your right channel cancels out the left one.

  (If you're not running PulseAudio, you can try doing the same through
  AlsaMixer instead (see https://wiki.ubuntu.com/Audio/Alsamixer ), try
  changing "Capture" level or "Internal Mic" or "Internal Mic Boost"
  using the Q,E,Z,C keys.)

  If so, please file a separate bug against the alsa-driver for your
  issue, make sure hardware info gets attached to it (either alsa-info
  as per https://wiki.ubuntu.com/Audio/AlsaInfo or the standard ones
  that follows when you do "ubuntu-bug alsa-driver" ), then write a
  comment in this bug, with your machine name and a pointer to the other
  bug.

  As time permits, I'll try to work on fixing them for the next Ubuntu release. 
Thanks!
   -- David Henningsson

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1002978/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1817793] Re: Audio is not switchable through Plasma widgets

2019-02-26 Thread Kai-Heng Feng

** Also affects: pulseaudio (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1817793

Title:
  Audio is not switchable through Plasma widgets

Status in linux package in Ubuntu:
  Incomplete
Status in pulseaudio package in Ubuntu:
  New

Bug description:
  On my convertible, there seems to be no way to adept to changing audio 
drains; except of starting and re-configuring PulseAudio Volume Control. 
  I have a tablet, with a detachable keyboard and an external monitor with 
audio. What the normal volume control offers is irrelevant at switching those. 
Changing audio sources is not detected, and none of the usual controls allows 
for manual adaptations except PulseAudio Volume Control. 

  I have attached 4 screenshots: 
   - The standard volume control. It is possible to control all three drains 
(Devices), but it doesn't help when you disconnect. 
   - The PulseAudio Volume Control Configuration. Also that doesn't help.
   - The PulseAudio Volume Control Playback is the only place to select to 
where the audio goes. Alas, if one or even more disappear, here it is getting 
stuck there. Leaving the user without sound.
   - The somewhat most obvious place then is the standard volume control 
(Applications). However, this works differently from the almost identical one 
in PulseAudio Volume Control, in that it doesn't allow switching drains. 
Instead, one can increase the volume above 100%

  I do agree this bug is rather a RFE, though one that is obvious: The system 
does 'know' when a drain disappears, but it is not 'intelligent' enough to 
follow the still available ones. It would be natural, to allow the user to 
define preferences to which one it changes.
  As long as this doesn't exist, it is even more obvious to allow for that 
switching through the standard volume control.
  --- 
  ProblemType: Bug
  ApportVersion: 2.20.9-0ubuntu7.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  udippel1822 F pulseaudio
   /dev/snd/pcmC0D3p:   udippel1822 F...m pulseaudio
   /dev/snd/controlC0:  udippel1822 F pulseaudio
  CurrentDesktop: KDE
  DistroRelease: Ubuntu 18.04
  HibernationDevice: RESUME=UUID=73792941-18ec-4d73-9640-1844bdad05dc
  InstallationDate: Installed on 2019-02-16 (10 days ago)
  InstallationMedia: Kubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 
(20180725)
  MachineType: LENOVO 20CHS10P02
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-45-generic 
root=UUID=0f5d3b8a-5cae-45cb-a42d-b89344359b2f ro quiet splash vt.handoff=1
  ProcVersionSignature: Ubuntu 4.15.0-45.48-generic 4.15.18
  RelatedPackageVersions:
   linux-restricted-modules-4.15.0-45-generic N/A
   linux-backports-modules-4.15.0-45-generic  N/A
   linux-firmware 1.173.3
  Tags:  bionic
  Uname: Linux 4.15.0-45-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 10/31/2018
  dmi.bios.vendor: LENOVO
  dmi.bios.version: N17ETA2W (2.02 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20CHS10P02
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0E50510 WIN
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 11
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: None
  dmi.modalias: 
dmi:bvnLENOVO:bvrN17ETA2W(2.02):bd10/31/2018:svnLENOVO:pn20CHS10P02:pvrThinkPadHelix2nd:rvnLENOVO:rn20CHS10P02:rvrSDK0E50510WIN:cvnLENOVO:ct11:cvrNone:
  dmi.product.family: ThinkPad Helix 2nd
  dmi.product.name: 20CHS10P02
  dmi.product.version: ThinkPad Helix 2nd
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1817793/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1817666] Re: system hangs

2019-02-26 Thread Daniel van Vugt

Are you able to say what you were/are doing when the system hangs?

Also, does that include the mouse pointer? Or does the mouse pointer
still move?

** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu)

** Summary changed:

- system hangs
+ [nouveau] system hangs

** Tags added: nouveau

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1817666

Title:
  [nouveau] system hangs

Status in xorg-server package in Ubuntu:
  New

Bug description:
  i dont know

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 4.4.0-79.100~14.04.1-generic 4.4.67
  Uname: Linux 4.4.0-79-generic x86_64
  NonfreeKernelModules: wl
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.29
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Tue Feb 26 12:19:26 2019
  DistUpgraded: 2016-11-14 14:16:19,712 DEBUG enabling apt cron job
  DistroCodename: trusty
  DistroVariant: ubuntu
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:3977]
   NVIDIA Corporation GF119M [GeForce 610M] [10de:1058] (rev a1) (prog-if 00 
[VGA controller])
  InstallationDate: Installed on 2016-11-12 (835 days ago)
  InstallationMedia: Edubuntu 14.04.5 LTS "Trusty Tahr" - Release amd64 
(20160803.1)
  MachineType: LENOVO 20157
  ProcEnviron:
   LANGUAGE=en_IN:en
   PATH=(custom, no user)
   LANG=en_IN
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-79-generic 
root=UUID=3006e45f-5f40-45c8-a376-3b9473cb4f8b ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to trusty on 2016-11-14 (833 days ago)
  dmi.bios.date: 02/01/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 62CN44WW
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Emerald Lake 2
  dmi.board.vendor: LENOVO
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnLENOVO:bvr62CN44WW:bd02/01/2013:svnLENOVO:pn20157:pvrLenovoG580:rvnLENOVO:rnEmeraldLake2:rvrFAB1:cvnLENOVO:ct10:cvr0.1:
  dmi.product.name: 20157
  dmi.product.version: Lenovo G580
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.11.3+14.04.20160425-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1ubuntu0.14.04.2
  version.libgl1-mesa-dri: libgl1-mesa-dri N/A
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core N/A
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
  xserver.bootTime: Tue Feb 26 09:04:52 2019
  xserver.configfile: default
  xserver.errors:
   Failed to load module "nvidia" (module does not exist, 0)
   Failed to load module "nvidia" (module does not exist, 0)
   NOUVEAU(G0): [XvMC] Failed to initialize extension.
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16978 
   vendor SEC
  xserver.version: 2:1.18.3-1ubuntu2.3~trusty4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1817666/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1817617] Re: Video driver

2019-02-26 Thread Daniel van Vugt

** Package changed: xorg (Ubuntu) => xserver-xorg-video-intel (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1817617

Title:
  Video driver

Status in xserver-xorg-video-intel package in Ubuntu:
  Invalid

Bug description:
  ~apt-get install xserver-xorg-vt-get install xserver-xorg-video-intel
  Reading package lists... Done
  Building dependency tree   
  Reading state information... Done
  Some packages could not be installed. This may mean that you have
  requested an impossible situation or if you are using the unstable
  distribution that some required packages have not yet been created
  or been moved out of Incoming.
  The following information may help to resolve the situation:

  The following packages have unmet dependencies:
   xserver-xorg-video-intel : Depends: xorg-video-abi-23
  Depends: xserver-xorg-core (>= 2:1.18.99.901)
  E: Unable to correct problems, you have held broken packages.

  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: xorg 1:7.7+19ubuntu7.1
  ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20
  Uname: Linux 4.18.0-15-generic x86_64
  ApportVersion: 2.20.9-0ubuntu7.5
  Architecture: amd64
  CompositorRunning: None
  Date: Mon Feb 25 17:05:43 2019
  DistUpgraded: Fresh install
  DistroCodename: bionic
  DistroVariant: ubuntu
  DkmsStatus: virtualbox, 5.2.18, 4.18.0-15-generic, x86_64: installed
  ExtraDebuggingInterest: I just need to know a workaround
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 0b) (prog-if 00 [VGA controller])
 Subsystem: Dell Haswell-ULT Integrated Graphics Controller [1028:0651]
  InstallationDate: Installed on 2019-02-22 (2 days ago)
  InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 
(20190210)
  MachineType: Dell Inc. Inspiron 3442
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-15-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/23/2018
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A14
  dmi.board.name: 0P8H6J
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A14
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: Not Specified
  dmi.modalias: 
dmi:bvnDellInc.:bvrA14:bd05/23/2018:svnDellInc.:pnInspiron3442:pvrNotSpecified:rvnDellInc.:rn0P8H6J:rvrA14:cvnDellInc.:ct8:cvrNotSpecified:
  dmi.product.name: Inspiron 3442
  dmi.product.sku: 0651
  dmi.product.version: Not Specified
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz N/A
  version.libdrm2: libdrm2 2.4.95-1~18.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.2-0ubuntu1~18.04.2
  version.libgl1-mesa-glx: libgl1-mesa-glx 18.2.2-0ubuntu1~18.04.2
  version.xserver-xorg-core: xserver-xorg-core N/A
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1817617/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1817391] Re: [Acer Aspire XC-603] Audio stuttering

2019-02-26 Thread Daniel van Vugt

Your system has a modified config file here:

https://launchpadlibrarian.net/412444169/modified.conffile..etc.modprobe.d
.alsa-base.conf.txt

--- /etc/modprobe.d/alsa-base.conf  2015-07-31 11:42:17.0 +0800
+++ Downloads/modified.conffile..etc.modprobe.d.alsa-base.conf.txt  
2019-02-27 10:26:15.241596972 +0800
@@ -41,3 +41,4 @@
 options snd-pcsp index=-2
 # Keep snd-usb-audio from beeing loaded as first soundcard
 options snd-usb-audio index=-2
+options snd-hda-intel position_fix=2

but I don't know if that's relevant to this bug. In case it is then
please try commenting out the line:

  options snd-hda-intel position_fix=2

by changing it to:

  #options snd-hda-intel position_fix=2

and reboot.

As for testing other flavours, that's not the same as testing other
versions. Please follow the links in comment #3, boot each of the live
sessions and tell us if they exhibit the same bug.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1817391

Title:
  [Acer Aspire XC-603] Audio stuttering

Status in alsa-driver package in Ubuntu:
  Incomplete
Status in pulseaudio package in Ubuntu:
  Incomplete

Bug description:
  Since installing Ubuntu 18.10 on my system which previously had
  windows 10 I now get an intermittent stutter or hiccup for want of a
  better word. It happens in Firefox Quantum and Chrome/Chromium I have
  tried a number of fixes from you tube and various forums, but it still
  happens and I'm at my wits end as it is so random.

  My system is a Acer Aspire XC-603

  1tb HDD
  4gb ram
  Intel Celeron J1900 @ 1.99 GHz

  The sound card is integrated on the mother board

  HDA-Intell-HDA intel PCH this problem is so random i never know when
  its going to happen some times it does it one sometimes multiple
  times.

  I'm totally at a loss

  Can any one help ? I'm relatively new to this

  I'm unable to locate the package version

  I expected a clean audio output without any bugs and I'm getting
  hiccups and stuttering

  ProblemType: Bug
  DistroRelease: Ubuntu 18.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.18.0-15.16-generic 4.18.20
  Uname: Linux 4.18.0-15-generic x86_64
  ApportVersion: 2.20.10-0ubuntu13.2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  andrew 5045 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Sat Feb 23 16:10:25 2019
  InstallationDate: Installed on 2019-02-22 (1 days ago)
  InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 
(20181017.3)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/16/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P11-B1
  dmi.board.name: Aspire XC-603
  dmi.board.vendor: Acer
  dmi.chassis.type: 3
  dmi.chassis.vendor: Acer
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP11-B1:bd06/16/2014:svnAcer:pnAspireXC-603:pvr:rvnAcer:rnAspireXC-603:rvr:cvnAcer:ct3:cvr:
  dmi.product.family: Acer Desktop
  dmi.product.name: Aspire XC-603
  dmi.sys.vendor: Acer
  mtime.conffile..etc.modprobe.d.alsa-base.conf: 2019-02-23T12:07:26.743044

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1817391/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1788321] Re: swapon failed: invalid argument

2019-02-26 Thread utnubudnai

ubuntu 16.04, hit the same issue as this. swapon -v shows these:

```
swapon: /my/swap: found swap signature: version 1d, page-size 4, same byte order
swapon: /my/swap: pagesize=4096, swapsize=13..., devsize=13
swapon: /my/swap: swapon failed: Invalid argument
```

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to util-linux in Ubuntu.
https://bugs.launchpad.net/bugs/1788321

Title:
  swapon failed: invalid argument

Status in linux package in Ubuntu:
  Confirmed
Status in util-linux package in Ubuntu:
  Invalid

Bug description:
  Environment:
   - Ubuntu 18.04.1 LTS
   - Linux 4.15.0-32-generic i686

  Description:
  When I try to mount my swap partition or my swap file, I get "swapon failed: 
invalid argument" .

  Steps to reproduce:
  1) sudo bash
  2) dd if=/dev/zero of=/swapfile bs=1024 count=524288
  3) mkswap /swapfile
  4) chown root:root /swapfile
  5) chmod 0600 /swapfile
  6) swapon /swapfile
  Last execution returns "swapon failed: invalid argument" .

  I'm almost sure it's a bug because I have no problems using Linux
  4.15.0-29-generic instead of Linux 4.15.0-32-generic. Also, no
  problems using Ubuntu 18.04.1 LTS Live CD.

  Regards.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788321/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1758736] Please test proposed package

2019-02-26 Thread Brian Murray

Hello Kaj, or anyone else affected,

Accepted pulseaudio into bionic-proposed. The package will build now and
be available at
https://launchpad.net/ubuntu/+source/pulseaudio/1:11.1-1ubuntu7.2 in a
few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.  Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-bionic to verification-done-bionic. If it does not
fix the bug for you, please add a comment stating that, and change the
tag to verification-failed-bionic. In either case, without details of
your testing we will not be able to proceed.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance for helping!

N.B. The updated package will be released to -updates after the bug(s)
fixed by this package have been verified and the package has been in
-proposed for a minimum of 7 days.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1758736

Title:
  [USB-Audio - SteelSeries Arctis 7, playback] No stereo playback only
  mono playback

Status in pulseaudio package in Ubuntu:
  Fix Released
Status in pulseaudio source package in Bionic:
  Fix Committed
Status in pulseaudio source package in Cosmic:
  Fix Committed
Status in pulseaudio source package in Disco:
  Fix Released

Bug description:
  [Impact]

   * User is only able to get mono audio from steelseries headsets
  because they provide both a stereo and mono output.  PA selects the
  mono output by default.

   * This should be backported to stable releases because this fix is 
 isolated to code that only applies to the affected headsets.  
 Additionally other gaming headsets may be more easily enabled by adding 
  ATTRS{idVendor}=="", ATTRS{idProduct}=="", 
ENV{PULSE_PROFILE_SET}="steelseries-arctis-7-usb-audio.conf"
 to /lib/udev/rules.d/90-pulseaudio.rules now.  Such as the Lucidsound 
 LS31 which I own.

   * The upload fixes the bug by conditionally setting a pulseaudio
  profile for the headset based on specific usb vendor and product ids
  in the udev rules.

  [Test Case]

   1. Acquire headset.
   2. Open sound settings, and click test speakers.
   3. Only option available will be mono sound

  [Regression Potential]

   * Risk of regressions should be mitigated to those who own the
  headset.  In which case it is likely that their headset is already not
  working.

  [Other Info]
   
   * All patches originate from upstream pulseaudio, and are documented as
 such including the shas.
   
   * I will be pursuing enabling other similar headsets in the coming weeks.
   * I plan to work with upstream pulseaudio to enable my own headset and to
 also make the headset templates backported here more generic.

  
   Original Description -

  There is not stereo playback only mono playback

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: pulseaudio 1:10.0-2ubuntu3.1
  ProcVersionSignature: Ubuntu 4.13.0-37.42-generic 4.13.13
  Uname: Linux 4.13.0-37-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.7
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC1D0p:   kaj1755 F...m pulseaudio
   /dev/snd/controlC1:  kaj1755 F pulseaudio
   /dev/snd/pcmC0D0c:   kaj1755 F...m pulseaudio
   /dev/snd/controlC0:  kaj1755 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Sun Mar 25 21:30:50 2018
  InstallationDate: Installed on 2018-03-08 (17 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:S7 successful
  Symptom_Card: SteelSeries Arctis 7 - SteelSeries Arctis 7
  Symptom_PulsePlaybackTest: PulseAudio playback test failed
  Symptom_Type: No sound at all
  Title: [USB-Audio - SteelSeries Arctis 7, playback] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/09/2016
  dmi.bios.vendor: LENOVO
  dmi.bios.version: R06ET35W (1.09 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20FMS2AV00
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40697 WIN
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: None
  dmi.modalias: 
dmi:bvnLENOVO:bvrR06ET35W(1.09):bd03/09/2016:svnLENOVO:pn20FMS2AV00:pvrThinkPadT460:rvnLENOVO:rn20FMS2AV00:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone:
  dmi.product.family: ThinkPad T460
  dmi.pr

[Touch-packages] [Bug 1758736] Re: [USB-Audio - SteelSeries Arctis 7, playback] No stereo playback only mono playback

2019-02-26 Thread Brian Murray

Hello Kaj, or anyone else affected,

Accepted pulseaudio into cosmic-proposed. The package will build now and
be available at
https://launchpad.net/ubuntu/+source/pulseaudio/1:12.2-0ubuntu5 in a few
hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.  Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested and change the tag from
verification-needed-cosmic to verification-done-cosmic. If it does not
fix the bug for you, please add a comment stating that, and change the
tag to verification-failed-cosmic. In either case, without details of
your testing we will not be able to proceed.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance for helping!

N.B. The updated package will be released to -updates after the bug(s)
fixed by this package have been verified and the package has been in
-proposed for a minimum of 7 days.

** Changed in: pulseaudio (Ubuntu Cosmic)
   Status: In Progress => Fix Committed

** Tags added: verification-needed verification-needed-cosmic

** Changed in: pulseaudio (Ubuntu Bionic)
   Status: In Progress => Fix Committed

** Tags added: verification-needed-bionic

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1758736

Title:
  [USB-Audio - SteelSeries Arctis 7, playback] No stereo playback only
  mono playback

Status in pulseaudio package in Ubuntu:
  Fix Released
Status in pulseaudio source package in Bionic:
  Fix Committed
Status in pulseaudio source package in Cosmic:
  Fix Committed
Status in pulseaudio source package in Disco:
  Fix Released

Bug description:
  [Impact]

   * User is only able to get mono audio from steelseries headsets
  because they provide both a stereo and mono output.  PA selects the
  mono output by default.

   * This should be backported to stable releases because this fix is 
 isolated to code that only applies to the affected headsets.  
 Additionally other gaming headsets may be more easily enabled by adding 
  ATTRS{idVendor}=="", ATTRS{idProduct}=="", 
ENV{PULSE_PROFILE_SET}="steelseries-arctis-7-usb-audio.conf"
 to /lib/udev/rules.d/90-pulseaudio.rules now.  Such as the Lucidsound 
 LS31 which I own.

   * The upload fixes the bug by conditionally setting a pulseaudio
  profile for the headset based on specific usb vendor and product ids
  in the udev rules.

  [Test Case]

   1. Acquire headset.
   2. Open sound settings, and click test speakers.
   3. Only option available will be mono sound

  [Regression Potential]

   * Risk of regressions should be mitigated to those who own the
  headset.  In which case it is likely that their headset is already not
  working.

  [Other Info]
   
   * All patches originate from upstream pulseaudio, and are documented as
 such including the shas.
   
   * I will be pursuing enabling other similar headsets in the coming weeks.
   * I plan to work with upstream pulseaudio to enable my own headset and to
 also make the headset templates backported here more generic.

  
   Original Description -

  There is not stereo playback only mono playback

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: pulseaudio 1:10.0-2ubuntu3.1
  ProcVersionSignature: Ubuntu 4.13.0-37.42-generic 4.13.13
  Uname: Linux 4.13.0-37-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.7
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC1D0p:   kaj1755 F...m pulseaudio
   /dev/snd/controlC1:  kaj1755 F pulseaudio
   /dev/snd/pcmC0D0c:   kaj1755 F...m pulseaudio
   /dev/snd/controlC0:  kaj1755 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Sun Mar 25 21:30:50 2018
  InstallationDate: Installed on 2018-03-08 (17 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:S7 successful
  Symptom_Card: SteelSeries Arctis 7 - SteelSeries Arctis 7
  Symptom_PulsePlaybackTest: PulseAudio playback test failed
  Symptom_Type: No sound at all
  Title: [USB-Audio - SteelSeries Arctis 7, playback] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/09/2016
  dmi.bios.vendor: LENOVO
  dmi.bios.version: R06ET35W (1.09 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20FMS2AV00
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40697 WIN
  dmi.chassis.asset.tag: No Asset Information
  dmi.chass

[Touch-packages] [Bug 1721223] Re: Networkd fail to set ip address between leases if ip address changes on UbuntuCore

2019-02-26 Thread William Grant

** Attachment removed: "job-vs-career-og.png"

https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1721223/+attachment/5241750/+files/job-vs-career-og.png

--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1721223

Title:
Networkd fail to set ip address between leases if ip address changes
on UbuntuCore

Status in Snappy:
Fix Committed
Status in systemd package in Ubuntu:
Fix Released
Status in systemd source package in Xenial:
Fix Released
Status in systemd source package in Zesty:
Won't Fix
Status in systemd source package in Artful:
Fix Released

Bug description:
[Impact]

* networkd fails to renew a lease, specifically it fails to change IPv4
address via DHCP renew/rebind.
* networkd relies on a kernel feature to promote secondary IPv4 address to
primary, upon primary address lease expiry.
* this sysctl tunable was not enabled by default in systemd.

[Test Case]

Add a device, and assign two IPv4 addresses. First one, with a short
lease time. Second one, with a different ip and a longer lease time.
Second one should be treated as secondary ip address, and upon expiry
of the first one, should be promoted and become primary ip address.
The below scripted instructions simulate this:

sudo ip link add name testleases type dummy

sudo ip address add 192.0.2.10/27 dev testleases \
valid_lft 5 preferred_lft 5

sudo ip address add 192.0.2.11/27 dev testleases \
valid_lft 11 preferred_lft 11

ip address list dev testleases | \
grep -q 'inet 192.0.2.10/27 scope global dynamic testleases' \
&& echo ok || echo not ok

ip address list dev testleases | \
grep -q 'inet 192.0.2.11/27 scope global secondary dynamic testleases' \
&& echo ok || echo not ok

sleep 6

ip address list dev testleases | \
grep -q 'inet 192.0.2.11/27 scope global dynamic testleases' \
&& echo ok || echo not ok

sudo ip link del dev testleases

[Regression Potential]

* This changes the default kernel behaviour, previously upon expiry
of the primary address, secondary addresses were removed as well.
Which is imho silly.

* comparing networkd renewal with isc-dhcp renewal the semantics are
quite different. Upon acquiring new ip address, isc-dhcp would
instantly flush existing ip address, and add a new one. Networkd add
the new address as secondary, and waits for old one to expire first
before promoting / switching to using the new ip address. IMHO kernel
should have an API to promote secondary ip address to a primary one.

* This update also applies other safe-looking options, which are
currently also already applied via sysctls shipped in other packages

# Source route verification
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1

# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.all.accept_source_route = 0

# Enable hard and soft link protection
fs.protected_hardlinks = 1
fs.protected_symlinks = 1

* This update also applies the following upstream/bufferbloat.net
recommended setting

# Fair Queue CoDel packet scheduler to fight bufferbloat
net.core.default_qdisc = fq_codel

* [~racb] There are complex network setups out there, such as HA with
corosync/pacemaker, OpenStack Neutron, and that kind of thing. If this
fix were SRU'd, will all of these things in the wild cope with this
sysctl change?

[Other Info]

* Original bug report

Hi there,
we found a replicable issue that involves the Ubuntu Core networking and
causes complete loss of connectivity.
We run a custom board with ubuntu core: the architecure is amrhf.
We replicated this issue with an official Ubuntu Core image on a Raspberry
Pi: other platform was been tested.
It shows that it is a snap core problem which interests networkd: we use the
default network stack based on networkd + netplan.

Below steps to replicate the issue.

1)Setup a dhcp server for lease of about some minutes (i.e 10 minutes).
2)Boot the board and wait for get an ip from dhcp server
3)Before the lease expires, set a reservation for a different ip address

Depending on lease duration before the lease expires( for 10 minute we have 2
minutes before ), networkd configure the new address in addition to the
previous one.
When the lease expire both ip address ( the prevoius and the new one )
disappear from the interested network interface.
Depending on lease duration before the second lease expires ( for 10 minure
we have 2 minutes before ) networkd configure only the new ip address on the
network interface and the ping toward an outside host work properly.

During the test the dhcp server records correctly leases and their
duration.

We check directly from console the network interface setting with the
tool ip, checking continuously the value for i

[Touch-packages] [Bug 1754872] Re: apt install xubuntu-desktop does not resolve dependencies properly

2019-02-26 Thread Theo Linkspfeifer

No changes were made to xubuntu-core and xubuntu-desktop yet, so the bug
is obviously not fixed yet. However, the part regarding xfce4-session
was fixed (should not pull in xscreensaver anymore).

** Changed in: xfce4-session (Ubuntu)
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-datetime in
Ubuntu.
https://bugs.launchpad.net/bugs/1754872

Title:
  apt install xubuntu-desktop does not resolve dependencies properly

Status in apt package in Ubuntu:
  Invalid
Status in gnome-control-center package in Ubuntu:
  Invalid
Status in indicator-datetime package in Ubuntu:
  Invalid
Status in xfce4-session package in Ubuntu:
  Fix Released
Status in xubuntu-meta package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:
  1. Install `xubuntu-desktop` meta package on 18.04 LTS
  2. Login to session
  3a. Click on clock indicator on panel, select "Time & Date Settings"
  3b. Click on Gear, select "About this Computer" or "System Settings"
  3c. Click on keyboard layout indicator, select "Text Entry Settings"

  Expected results:
  xfce-oriented control center is opened

  Actual results:
  gnome-control-center is opened, but with empty window.

  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: xubuntu-desktop 2.223
  ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3
  Uname: Linux 4.15.0-10-generic x86_64
  ApportVersion: 2.20.8-0ubuntu10
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Sat Mar 10 21:10:11 2018
  SourcePackage: xubuntu-meta
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1754872/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1814133] Re: update to openjdk 11 in 18.04 LTS

2019-02-26 Thread Matthias Klose

** Also affects: openjpa (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gettext in Ubuntu.
https://bugs.launchpad.net/bugs/1814133

Title:
  update to openjdk 11 in 18.04 LTS

Status in activemq package in Ubuntu:
  New
Status in batik package in Ubuntu:
  New
Status in bindex package in Ubuntu:
  New
Status in ca-certificates-java package in Ubuntu:
  New
Status in carrotsearch-hppc package in Ubuntu:
  New
Status in commons-httpclient package in Ubuntu:
  New
Status in eclipselink package in Ubuntu:
  New
Status in figtree package in Ubuntu:
  New
Status in gatk-native-bindings package in Ubuntu:
  New
Status in gettext package in Ubuntu:
  New
Status in gkl package in Ubuntu:
  New
Status in gradle package in Ubuntu:
  New
Status in groovy package in Ubuntu:
  New
Status in hsqldb package in Ubuntu:
  New
Status in hsqldb1.8.0 package in Ubuntu:
  New
Status in htsjdk package in Ubuntu:
  New
Status in insubstantial package in Ubuntu:
  New
Status in jabref package in Ubuntu:
  New
Status in jackson-module-jaxb-annotations package in Ubuntu:
  New
Status in jameica package in Ubuntu:
  New
Status in jameica-datasource package in Ubuntu:
  New
Status in jameica-util package in Ubuntu:
  New
Status in jasperreports package in Ubuntu:
  New
Status in java-common package in Ubuntu:
  New
Status in javatools package in Ubuntu:
  New
Status in jaxws-api package in Ubuntu:
  New
Status in jboss-jdeparser2 package in Ubuntu:
  New
Status in jboss-modules package in Ubuntu:
  New
Status in jersey1 package in Ubuntu:
  New
Status in jftp package in Ubuntu:
  New
Status in jmdns package in Ubuntu:
  New
Status in jnr-posix package in Ubuntu:
  New
Status in jruby package in Ubuntu:
  New
Status in jruby-openssl package in Ubuntu:
  New
Status in junit4 package in Ubuntu:
  New
Status in jws-api package in Ubuntu:
  New
Status in jython package in Ubuntu:
  New
Status in libbtm-java package in Ubuntu:
  New
Status in libcommons-collections3-java package in Ubuntu:
  New
Status in libcommons-collections4-java package in Ubuntu:
  New
Status in libgpars-groovy-java package in Ubuntu:
  New
Status in libhibernate-validator-java package in Ubuntu:
  New
Status in libjackson-json-java package in Ubuntu:
  New
Status in libjdo-api-java package in Ubuntu:
  New
Status in libjdom1-java package in Ubuntu:
  New
Status in libnetx-java package in Ubuntu:
  New
Status in libquartz-java package in Ubuntu:
  New
Status in libreoffice package in Ubuntu:
  New
Status in libreoffice-l10n package in Ubuntu:
  New
Status in libscram-java package in Ubuntu:
  New
Status in libswingx-java package in Ubuntu:
  New
Status in libxml-security-java package in Ubuntu:
  New
Status in libxstream-java package in Ubuntu:
  New
Status in logback package in Ubuntu:
  New
Status in mariadb-connector-java package in Ubuntu:
  New
Status in maven-bundle-plugin package in Ubuntu:
  New
Status in maven-enforcer package in Ubuntu:
  New
Status in maven-javadoc-plugin package in Ubuntu:
  New
Status in maven-jaxb2-plugin package in Ubuntu:
  New
Status in maven-plugin-tools package in Ubuntu:
  New
Status in mckoisqldb package in Ubuntu:
  New
Status in metro-policy package in Ubuntu:
  New
Status in mockito package in Ubuntu:
  New
Status in msv package in Ubuntu:
  New
Status in obantoo package in Ubuntu:
  New
Status in objenesis package in Ubuntu:
  New
Status in octave package in Ubuntu:
  New
Status in openjdk-11-jre-dcevm package in Ubuntu:
  New
Status in openjdk-lts package in Ubuntu:
  New
Status in openjfx package in Ubuntu:
  New
Status in openjpa package in Ubuntu:
  New
Status in orthanc-imagej package in Ubuntu:
  New
Status in pdfsam package in Ubuntu:
  New
Status in procyon package in Ubuntu:
  New
Status in rdp-alignment package in Ubuntu:
  New
Status in rdp-classifier package in Ubuntu:
  New
Status in rdp-readseq package in Ubuntu:
  New
Status in resteasy3.0 package in Ubuntu:
  New
Status in rsyntaxtextarea package in Ubuntu:
  New
Status in saaj package in Ubuntu:
  New
Status in scala package in Ubuntu:
  New
Status in scilab package in Ubuntu:
  New
Status in shiro package in Ubuntu:
  New
Status in sitemesh package in Ubuntu:
  New
Status in snakeyaml package in Ubuntu:
  New
Status in trove3 package in Ubuntu:
  New
Status in uimaj package in Ubuntu:
  New
Status in unsafe-mock package in Ubuntu:
  New
Status in visualvm package in Ubuntu:
  New
Status in writer2latex package in Ubuntu:
  New
Status in xmlbeans package in Ubuntu:
  New
Status in zeroc-ice package in Ubuntu:
  New
Status in clojure1.8 source package in Bionic:
  Fix Committed
Status in dd-plist source package in Bionic:
  Fix Committed
Status in gettext source package in Bionic:
  Fix Committed
Status in gradle source package in Bionic:
  Fix Committed
Status in gradle-debian-helper source package in Bionic:
  Fix Committed
Status in

Re: [Touch-packages] [Bug 1817391] Re: Audio stuttering

2019-02-26 Thread Andrew Crome

Hi

all the suggestions that have been offered I have tried no changes were 
made as far as I know, I tried other flavours  all do the same !

On 25/2/19 1:16 pm, Daniel van Vugt wrote:
> It seems you have made some changes to the sound configuration, so can
> you please first try live booting:
>
>http://releases.ubuntu.com/18.10/
>
> and 19.04:
>
>http://cdimages.ubuntu.com/daily-live/current/
>
> then tell us if they have the same problem in a live session?
>
> ** Also affects: pulseaudio (Ubuntu)
> Importance: Undecided
> Status: New
>
> ** Summary changed:
>
> - Audio stuttering
> + [Acer Aspire XC-603] Audio stuttering
>
> ** Changed in: alsa-driver (Ubuntu)
> Status: New => Incomplete
>
> ** Changed in: pulseaudio (Ubuntu)
> Status: New => Incomplete
>

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1817391

Title:
  [Acer Aspire XC-603] Audio stuttering

Status in alsa-driver package in Ubuntu:
  Incomplete
Status in pulseaudio package in Ubuntu:
  Incomplete

Bug description:
  Since installing Ubuntu 18.10 on my system which previously had
  windows 10 I now get an intermittent stutter or hiccup for want of a
  better word. It happens in Firefox Quantum and Chrome/Chromium I have
  tried a number of fixes from you tube and various forums, but it still
  happens and I'm at my wits end as it is so random.

  My system is a Acer Aspire XC-603

  1tb HDD
  4gb ram
  Intel Celeron J1900 @ 1.99 GHz

  The sound card is integrated on the mother board

  HDA-Intell-HDA intel PCH this problem is so random i never know when
  its going to happen some times it does it one sometimes multiple
  times.

  I'm totally at a loss

  Can any one help ? I'm relatively new to this

  I'm unable to locate the package version

  I expected a clean audio output without any bugs and I'm getting
  hiccups and stuttering

  ProblemType: Bug
  DistroRelease: Ubuntu 18.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.18.0-15.16-generic 4.18.20
  Uname: Linux 4.18.0-15-generic x86_64
  ApportVersion: 2.20.10-0ubuntu13.2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  andrew 5045 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Sat Feb 23 16:10:25 2019
  InstallationDate: Installed on 2019-02-22 (1 days ago)
  InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 
(20181017.3)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/16/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P11-B1
  dmi.board.name: Aspire XC-603
  dmi.board.vendor: Acer
  dmi.chassis.type: 3
  dmi.chassis.vendor: Acer
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP11-B1:bd06/16/2014:svnAcer:pnAspireXC-603:pvr:rvnAcer:rnAspireXC-603:rvr:cvnAcer:ct3:cvr:
  dmi.product.family: Acer Desktop
  dmi.product.name: Aspire XC-603
  dmi.sys.vendor: Acer
  mtime.conffile..etc.modprobe.d.alsa-base.conf: 2019-02-23T12:07:26.743044

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1817391/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1817799] [NEW] [FFe] apparmor 2.13

2019-02-26 Thread Jamie Strandboge

Public bug reported:

TODO

** Affects: apparmor (Ubuntu)
 Importance: Undecided
 Assignee: Jamie Strandboge (jdstrand)
 Status: In Progress

** Changed in: apparmor (Ubuntu)
 Assignee: (unassigned) => Jamie Strandboge (jdstrand)

** Changed in: apparmor (Ubuntu)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor in Ubuntu.
https://bugs.launchpad.net/bugs/1817799

Title:
  [FFe] apparmor 2.13

Status in apparmor package in Ubuntu:
  In Progress

Bug description:
  TODO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1817799/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1809909] Re: package apport 2.20.1-0ubuntu2.18 failed to install/upgrade: subprocess installed post-installation script returned error exit status 239.

2019-02-26 Thread Launchpad Bug Tracker

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: apport (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1809909

Title:
  package apport 2.20.1-0ubuntu2.18 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 239.

Status in apport package in Ubuntu:
  Confirmed

Bug description:
  Happened while upgrading via apt.
  apport did not upgrade, gave a segmentation fault.

  Now, the OS (Ubuntu 16.04.5 LTS) does not even boot sometimes.

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: apport 2.20.1-0ubuntu2.18
  ProcVersionSignature: Ubuntu 4.15.0-43.46~16.04.1-generic 4.15.18
  Uname: Linux 4.15.0-43-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.18
  Architecture: amd64
  CrashReports:
   640:0:116:406436:2018-12-27 20:44:57.411726236 +0530:2018-12-27 
20:44:58.411726236 +0530:/var/crash/_usr_lib_xorg_Xorg.0.crash
   600:0:116:454368:2018-12-26 23:50:15.102489948 +0530:2018-12-26 
23:50:16.102489948 +0530:/var/crash/apport.0.crash
  Date: Wed Dec 26 23:50:15 2018
  DuplicateSignature:
   package:apport:2.20.1-0ubuntu2.18
   Installing new version of config file /etc/init/apport.conf ...
   Segmentation fault
   dpkg: error processing package apport (--configure):
subprocess installed post-installation script returned error exit status 239
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 239
  InstallationDate: Installed on 2018-12-26 (1 days ago)
  InstallationMedia: Ubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 
(20170215.2)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.5
   apt  1.2.29
  SourcePackage: apport
  Title: package apport 2.20.1-0ubuntu2.18 failed to install/upgrade: 
subprocess installed post-installation script returned error exit status 239
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1809909/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1798861] Re: Tooltips flicker constantly in GTK3 applications

2019-02-26 Thread Jeremy Bicha

The fix for this has completed verification and is rolling out as an
update to Ubuntu 18.10 computers over the next few days.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1798861

Title:
  Tooltips flicker constantly in GTK3 applications

Status in gtk+3.0 package in Ubuntu:
  Fix Released
Status in gtk+3.0 source package in Cosmic:
  Fix Released
Status in gtk+3.0 package in Debian:
  Fix Released

Bug description:
  Tooltips are flicker constantly (i.e. repeatedly shown and the hidden
  again) in GTK3 applications under XFCE.

  It is a regression in the recent GTK 3.24.

  This is the upstream report and fix:
  https://gitlab.gnome.org/GNOME/gtk/issues/1371
  
https://gitlab.gnome.org/GNOME/gtk/commit/9b7d886b723132eade2e76f3fd179cf81b7601f2

  A workaround for XFCE is as follows:

  Open Settings Editor.
  Set xsettings -> Gtk -> CursorThemeSize to 16.

  ProblemType: Bug
  DistroRelease: Ubuntu 18.10
  Package: libgtk-3-0 3.24.1-1ubuntu2
  Uname: Linux 4.19.0-041900rc8-generic x86_64
  ApportVersion: 2.20.10-0ubuntu13
  Architecture: amd64
  Date: Fri Oct 19 12:23:53 2018
  InstallationDate: Installed on 2017-02-01 (624 days ago)
  InstallationMedia: Xubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gtk+3.0
  UpgradeStatus: Upgraded to cosmic on 2018-10-18 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1798861/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1683428] Re: read_csv on bzip2 file unzips only the first block

2019-02-26 Thread Rebecca Palmer

('invalid' = 'not our (pandas') bug')

As noted in the linked upstream bug, this only affects Python 2 (python-
pandas), not current Python 3 (python3-pandas).

** Changed in: pandas (Ubuntu)
   Status: Confirmed => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python2.7 in Ubuntu.
https://bugs.launchpad.net/bugs/1683428

Title:
  read_csv on bzip2 file unzips only the first block

Status in pandas package in Ubuntu:
  Invalid
Status in python2.7 package in Ubuntu:
  Won't Fix

Bug description:
  It seems that the read_csv() suffers the same symptoms as eg the early
  boost implementations, see
  https://svn.boost.org/trac/boost/ticket/3853 for details. The bz2
  files can namely be composed of many concatenated bz2 blocks which
  have to be treated as a continuous stream.

  How to test: create large csv file, much larger than 900k. Compress
  with pbzip2 (each process creates one bz2 block). Alternatively create
  many such csv files, bzip2 them individually and then cat *.bz2
  >joined.bz2

  read_csv() will uncompress and read only the first block.

  Note that this is a severe bug since the parallel bzip2 is getting
  increasingly common on multi-core systems.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.10
  Package: python-pandas 0.17.1-3ubuntu2
  ProcVersionSignature: Ubuntu 4.8.0-42.45-generic 4.8.17
  Uname: Linux 4.8.0-42-generic x86_64
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Mon Apr 17 18:42:52 2017
  InstallationDate: Installed on 2014-10-21 (909 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  PackageArchitecture: all
  SourcePackage: pandas
  UpgradeStatus: Upgraded to yakkety on 2016-10-20 (179 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pandas/+bug/1683428/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1754872] Re: apt install xubuntu-desktop does not resolve dependencies properly

2019-02-26 Thread Norbert

Bug still exists. Simple installation of Xubuntu Desktop on top of 19.04
(disco) mini.iso with `sudo apt install xubuntu-desktop` results in long
list of unwanted GNOME packages.

I have created two outputs of `dpkg -l` before (mini.iso) and after
xubuntu-desktop installation.


$ diff before after  | grep gnome | awk '{print $3}'
language-pack-gnome-en
language-pack-gnome-en-base
libsoup-gnome2.4-1:amd64
gir1.2-gnomebluetooth-1.0:amd64
gir1.2-gnomedesktop-3.0:amd64
gkbd-capplet
gnome-accessibility-themes
gnome-bluetooth
gnome-control-center
gnome-control-center-data
gnome-control-center-faces
gnome-desktop3-data
gnome-font-viewer
gnome-icon-theme
gnome-keyring
gnome-keyring-pkcs11:amd64
gnome-menus
gnome-mines
gnome-online-accounts
gnome-power-manager
gnome-screensaver
gnome-session-bin
gnome-session-common
gnome-settings-daemon
gnome-settings-daemon-common
gnome-shell
gnome-shell-common
gnome-software
gnome-software-common
gnome-software-plugin-snap
gnome-startup-applications
gnome-sudoku
gnome-system-tools
gnome-themes-extra:amd64
gnome-themes-extra-data
gnome-themes-standard
gnome-user-docs
language-pack-gnome-en
language-pack-gnome-en-base
language-selector-gnome
libgnome-bluetooth13:amd64
libgnome-desktop-3-17:amd64
libgnome-games-support-1-3:amd64
libgnome-games-support-common
libgnome-menu-3-0:amd64
libgnomekbd-common
libgnomekbd8:amd64
libpam-gnome-keyring:amd64
libreoffice-gnome
libsoup-gnome2.4-1:amd64
network-manager-gnome
network-manager-pptp-gnome
pinentry-gnome3
policykit-1-gnome
yaru-theme-gnome-shell


and unity:

$ diff before after  | grep unity | awk '{print $3}'
libmeanwhile1:amd64
libunity-control-center1
libunity-protocol-private0:amd64
libunity-scopes-json-def-desktop
libunity-settings-daemon1:amd64
libunity9:amd64
unity-control-center
unity-greeter
unity-settings-daemon
xubuntu-community-wallpapers
xubuntu-community-wallpapers-bionic
yaru-theme-gnome-shell

So user still can't simply install Xubuntu on top of minimal system.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-datetime in
Ubuntu.
https://bugs.launchpad.net/bugs/1754872

Title:
  apt install xubuntu-desktop does not resolve dependencies properly

Status in apt package in Ubuntu:
  Invalid
Status in gnome-control-center package in Ubuntu:
  Invalid
Status in indicator-datetime package in Ubuntu:
  Invalid
Status in xfce4-session package in Ubuntu:
  Confirmed
Status in xubuntu-meta package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:
  1. Install `xubuntu-desktop` meta package on 18.04 LTS
  2. Login to session
  3a. Click on clock indicator on panel, select "Time & Date Settings"
  3b. Click on Gear, select "About this Computer" or "System Settings"
  3c. Click on keyboard layout indicator, select "Text Entry Settings"

  Expected results:
  xfce-oriented control center is opened

  Actual results:
  gnome-control-center is opened, but with empty window.

  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: xubuntu-desktop 2.223
  ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3
  Uname: Linux 4.15.0-10-generic x86_64
  ApportVersion: 2.20.8-0ubuntu10
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Sat Mar 10 21:10:11 2018
  SourcePackage: xubuntu-meta
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1754872/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1799913] Re: Unhandled lockdown error (-2) - iphone ios 12

2019-02-26 Thread Oliver Kamer

I have the same issue,  but I just double checked, it works on my
machine with bionic, the problem only arises on my cosmic machine.

iPad version: 12.1.4
works with 18.04.01 LTS
doesn't work on 18.10

If anyone has any ideas for me to try, please let me know, I'm happy to
try.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libimobiledevice in
Ubuntu.
https://bugs.launchpad.net/bugs/1799913

Title:
  Unhandled lockdown error (-2) - iphone ios 12

Status in libimobiledevice package in Ubuntu:
  Confirmed

Bug description:
  Hi!

  On Ubuntu 18.10 when I connect my iPhone 8Plus with the computer and click on 
the Documents in the file manager, I got this error: Unhandled lockdown error 
(-2). 
  I attached a screenshot about this error.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libimobiledevice/+bug/1799913/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1754872] Re: apt install xubuntu-desktop does not resolve dependencies properly

2019-02-26 Thread Norbert

** Changed in: xfce4-session (Ubuntu)
   Status: Fix Released => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-datetime in
Ubuntu.
https://bugs.launchpad.net/bugs/1754872

Title:
  apt install xubuntu-desktop does not resolve dependencies properly

Status in apt package in Ubuntu:
  Invalid
Status in gnome-control-center package in Ubuntu:
  Invalid
Status in indicator-datetime package in Ubuntu:
  Invalid
Status in xfce4-session package in Ubuntu:
  Confirmed
Status in xubuntu-meta package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:
  1. Install `xubuntu-desktop` meta package on 18.04 LTS
  2. Login to session
  3a. Click on clock indicator on panel, select "Time & Date Settings"
  3b. Click on Gear, select "About this Computer" or "System Settings"
  3c. Click on keyboard layout indicator, select "Text Entry Settings"

  Expected results:
  xfce-oriented control center is opened

  Actual results:
  gnome-control-center is opened, but with empty window.

  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: xubuntu-desktop 2.223
  ProcVersionSignature: Ubuntu 4.15.0-10.11-generic 4.15.3
  Uname: Linux 4.15.0-10-generic x86_64
  ApportVersion: 2.20.8-0ubuntu10
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Sat Mar 10 21:10:11 2018
  SourcePackage: xubuntu-meta
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1754872/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1817627] Re: systemd-analyze verify reports failure

2019-02-26 Thread Sebastien Bacher

The commit fixing the issue is
https://github.com/systemd/systemd/commit/114110cd

Could you describe why you think it's an issue important enough to
justify a stable update, it seems only a warning but not having
consequences? Do you use a real mount for the /tmp directory?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1817627

Title:
  systemd-analyze verify reports failure

Status in Ubuntu Manpage Repository:
  Invalid
Status in systemd package in Ubuntu:
  New

Bug description:
  Version 237 and 238 of systemd-analyze have a known issue:
  https://github.com/systemd/systemd/issues/8592

  When will a fix be posted?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-manpage-repository/+bug/1817627/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

89 matches

Mail list logo