[Touch-packages] [Bug 1849859] Re: smb printing fails
Despite really a lot of updates (samba, cups) the "held for authentication" problem persists! I hope, it's comming soon a solution. This is very disappointing. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1849859 Title: smb printing fails Status in cups package in Ubuntu: Confirmed Status in samba package in Ubuntu: Confirmed Status in system-config-printer package in Ubuntu: Confirmed Bug description: when I connect to smb server (nas) permanently appears "Error while getting peer-to-peer dbus connection: Operation was cancelled" The printer at this NAS doesn't work too. "held for authentication KeyError: 'auth-info-required'" The same printer at usb port works fine. Ubuntu development version 20.04 system-config-printer version 1.5.11-4ubuntu1 smbclient version 2:4.10.7+dfsg-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1849859/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859319] [NEW] widget factory slighty too wide for common 1366x768 display
Public bug reported: I'm using a ThinkPad X220 to test the Ubuntu default theme. It has a wildly common 1366x768 display panel. At the time of writing, around 25% of installs have such a resolution - https://ubuntu.com/desktop/statistics The default non-hiding 48px launcher, and width of the widget factory, means that it's impossible to get the entire application on screen at once. There appears to be some space which could be saved by shrinking horizontally a couple of components on each page. Steps to reproduce * Install Ubuntu 20.04. * Set system resolution to 1366x768 * Install gtk3-examples * Alt-f2, gtk3-widget-factory Expected outcome * Entire widget factory should fit on the screen Actual outcome * The widget factory window is off the right hand side of the screen Workaround Set the launcher to auto hide, to make room. I don't consider this suitable, because part of the point of gtk widget factory is to test the theme, the experience, the out of the box install. Being unable to actually get the window on the screen seems a flawed set of tests. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: gtk-3-examples 3.24.13-1ubuntu1 ProcVersionSignature: Ubuntu 5.3.0-24.26-generic 5.3.10 Uname: Linux 5.3.0-24-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu15 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun Jan 12 10:13:41 2020 InstallationDate: Installed on 2020-01-11 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200106) SourcePackage: gtk+3.0 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ** Attachment added: "Screenshot from 2020-01-12 10-20-48.png" https://bugs.launchpad.net/bugs/1859319/+attachment/5319366/+files/Screenshot%20from%202020-01-12%2010-20-48.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1859319 Title: widget factory slighty too wide for common 1366x768 display Status in gtk+3.0 package in Ubuntu: New Bug description: I'm using a ThinkPad X220 to test the Ubuntu default theme. It has a wildly common 1366x768 display panel. At the time of writing, around 25% of installs have such a resolution - https://ubuntu.com/desktop/statistics The default non-hiding 48px launcher, and width of the widget factory, means that it's impossible to get the entire application on screen at once. There appears to be some space which could be saved by shrinking horizontally a couple of components on each page. Steps to reproduce * Install Ubuntu 20.04. * Set system resolution to 1366x768 * Install gtk3-examples * Alt-f2, gtk3-widget-factory Expected outcome * Entire widget factory should fit on the screen Actual outcome * The widget factory window is off the right hand side of the screen Workaround Set the launcher to auto hide, to make room. I don't consider this suitable, because part of the point of gtk widget factory is to test the theme, the experience, the out of the box install. Being unable to actually get the window on the screen seems a flawed set of tests. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: gtk-3-examples 3.24.13-1ubuntu1 ProcVersionSignature: Ubuntu 5.3.0-24.26-generic 5.3.10 Uname: Linux 5.3.0-24-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu15 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun Jan 12 10:13:41 2020 InstallationDate: Installed on 2020-01-11 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200106) SourcePackage: gtk+3.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1859319/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859319] Re: widget factory slighty too wide for common 1366x768 display
** Attachment added: "Screenshot from 2020-01-12 10-20-54.png" https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1859319/+attachment/5319370/+files/Screenshot%20from%202020-01-12%2010-20-54.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1859319 Title: widget factory slighty too wide for common 1366x768 display Status in gtk+3.0 package in Ubuntu: New Bug description: I'm using a ThinkPad X220 to test the Ubuntu default theme. It has a wildly common 1366x768 display panel. At the time of writing, around 25% of installs have such a resolution - https://ubuntu.com/desktop/statistics The default non-hiding 48px launcher, and width of the widget factory, means that it's impossible to get the entire application on screen at once. There appears to be some space which could be saved by shrinking horizontally a couple of components on each page. Steps to reproduce * Install Ubuntu 20.04. * Set system resolution to 1366x768 * Install gtk3-examples * Alt-f2, gtk3-widget-factory Expected outcome * Entire widget factory should fit on the screen Actual outcome * The widget factory window is off the right hand side of the screen Workaround Set the launcher to auto hide, to make room. I don't consider this suitable, because part of the point of gtk widget factory is to test the theme, the experience, the out of the box install. Being unable to actually get the window on the screen seems a flawed set of tests. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: gtk-3-examples 3.24.13-1ubuntu1 ProcVersionSignature: Ubuntu 5.3.0-24.26-generic 5.3.10 Uname: Linux 5.3.0-24-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu15 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sun Jan 12 10:13:41 2020 InstallationDate: Installed on 2020-01-11 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20200106) SourcePackage: gtk+3.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1859319/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1854403] Re: Need updated libimobiledevice and dependencies to access iOS 13 devices
iPhone 7, latest software update iOS 13.3 (17C54), seems to fix this. I could successfully transfer files TO the phone using ubuntu 18.04.3 LTS. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libimobiledevice in Ubuntu. https://bugs.launchpad.net/bugs/1854403 Title: Need updated libimobiledevice and dependencies to access iOS 13 devices Status in libimobiledevice package in Ubuntu: Incomplete Status in libplist package in Ubuntu: Confirmed Status in libusbmuxd package in Ubuntu: Confirmed Status in usbmuxd package in Ubuntu: Confirmed Bug description: iOS 13 devices require updated libimobiledevice, libusbmuxd and usbmuxd to work correctly. Without the updates, the device appears to be accessible but it's impossible to copy files to the devices. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libimobiledevice/+bug/1854403/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859326] [NEW] When I logut and try to log in, the password field is hidden
Public bug reported: Hello, I have upgraded from Ubuntu 19.04 to Ubuntu 19.10. Now, When I logout, the lock-screen background is shown on the screen, usaully i used to press any button, then the lock-screen moves up, and the user login form appears, but now the login form never appears, only the lock-screen taking all of the screen, and I have to enter the password without seeing the form and press Enter to log in, I can't even see which user is selected. Thanks in advance. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.3.0-26.28-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..0a.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:0a:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 430.50 Thu Sep 5 22:36:31 CDT 2019 GCC version: gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun Jan 12 14:24:27 2020 DistUpgraded: 2020-01-12 13:15:58,832 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Failed to execute child process “./xorg_fix_proprietary.py” (No such file or directory) (8)) DistroCodename: eoan DistroVariant: ubuntu DkmsStatus: nvidia, 430.50, 5.0.0-38-generic, x86_64: installed nvidia, 430.50, 5.3.0-26-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Haswell-ULT Integrated Graphics Controller [103c:2166] Subsystem: Hewlett-Packard Company GK208M [GeForce GT 740M] [103c:2166] InstallationDate: Installed on 2019-05-02 (255 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) Lsusb: Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 04f2:b40e Chicony Electronics Co., Ltd HP Truevision HD camera Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=0335c8fd-b7c3-4fc4-bf52-2a78bfe22f38 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to eoan on 2020-01-12 (0 days ago) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.23 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 2166 dmi.board.vendor: Hewlett-Packard dmi.board.version: 29.40 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.23:bd09/26/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr08971030410610100:rvnHewlett-Packard:rn2166:rvr29.40:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP S=PAV X=Null dmi.product.name: HP Pavilion 15 Notebook PC dmi.product.sku: F1E53EA#ABV dmi.product.version: 08971030410610100 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.99-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.2.1-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.5+git20191008-0ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-1ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20190815-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug eoan third-party-packages ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859326 Title: When I logut and try to log in, the password field is hidden Status in xorg package in Ubuntu: New Bug description: Hello, I have upgraded from Ubuntu 19.04 to Ubuntu 19.10. Now, When I logout, the lock-screen background is shown on the screen, usaully i used to press any button, then the lock-screen moves up, and the user login form appears, but now the login form never appears, only the lock-screen taking all
[Touch-packages] [Bug 1840725] Re: Microphone not working in Ubuntu 18.04.3 LTS on new hp-spectre-x360-convertible-15 laptop
I have the same issue on a HP Spectre Folio 13 with Xubuntu 18.04. Internal microphone does not work. Headset microphone is detected when connected through a usb-c hub. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1840725 Title: Microphone not working in Ubuntu 18.04.3 LTS on new hp- spectre-x360-convertible-15 laptop Status in alsa-driver package in Ubuntu: Confirmed Bug description: Internal Microphone does not work in Ubuntu 18.04.3 LTS in a new hp- spectre-x360-convertible-15 laptop. The microphone works perfectly on Windows 10 (present in Dual boot mode). Initially, Internal Microphone was not even detected but installing alsa-tools-gui and overriding pin 0x12 to the Internal Microphone fixed that issue. [Pin 0x13 does not work and causes static in a headphone if it is plugged in.] Microphone is not able to pick up any sound. I changed levels/settings in alsamixer, pavucontrol without any success: In alsamixer: Experimented with levels ranging from very low to very high for Internal Mic, Capture, etc. In pavucontrol: Set the Internal Mic as a fallback device, unlocked the channels for the mic, experimented with reducing the level for one of the channels (reduced right mic level to Silence while keeping the left mic level normal/high and vice versa). alsa-info: http://alsa-project.org/db/?f=cf6d3ccc6372f955da7d99df07afbcb31d5a6c7f arecord -l List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC285 Analog [ALC285 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1840725/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859339] [NEW] Freeze
Public bug reported: Freeze screen, keyboard block, mouse smile, activity in court frozen regularly. only possibility to restart in force. it also restarts itself regularly. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21 Uname: Linux 5.0.0-37-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sun Jan 12 17:30:29 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c8) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7c51] InstallationDate: Installed on 2020-01-06 (6 days ago) InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) MachineType: Micro-Star International Co., Ltd. MS-7C51 ProcEnviron: PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=64715203-5a05-42f8-93df-f2967370ca5d ro quiet splash vt.handoff=1 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/03/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.10 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: A320M-A PRO (MS-7C51) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.10:bd09/03/2019:svnMicro-StarInternationalCo.,Ltd.:pnMS-7C51:pvr1.0:rvnMicro-StarInternationalCo.,Ltd.:rnA320M-APRO(MS-7C51):rvr1.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr1.0: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7C51 dmi.product.sku: To be filled by O.E.M. dmi.product.version: 1.0 dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1ubuntu1~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.8-0ubuntu0~18.04.3 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.8-0ubuntu0~18.04.3 version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859339 Title: Freeze Status in xorg package in Ubuntu: New Bug description: Freeze screen, keyboard block, mouse smile, activity in court frozen regularly. only possibility to restart in force. it also restarts itself regularly. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21 Uname: Linux 5.0.0-37-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sun Jan 12 17:30:29 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c8) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7c51] InstallationDate: Installed on 2020-01-06 (6 days ago) InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) MachineType: Micro-Star International Co., Ltd. MS-7C51 ProcEnviron: PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=64715203-5a05-42f8-93df-f2967370ca5d ro quiet splash vt.handoff=1 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/03/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.10 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: A320M-A PRO (MS-7C51) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.10:bd09/03/2019:svnMicro-StarInternationalCo.,Ltd.:pnMS-7C51:pvr1.0:rvnMicro-StarInternationalCo.,Ltd.:rnA320M-APRO(MS-7C51):rvr1.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr1.0: dmi.product.family: To be filled
[Touch-packages] [Bug 1859351] [NEW] package passwd 1:4.2-3.1ubuntu5.4 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration
Public bug reported: This is failed to install. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: passwd 1:4.2-3.1ubuntu5.4 ProcVersionSignature: Ubuntu 4.15.0-74.83~16.04.1-generic 4.15.18 Uname: Linux 4.15.0-74-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.21 AptOrdering: passwd: Configure NULL: ConfigurePending Architecture: amd64 Date: Sun Jan 12 23:16:37 2020 DpkgTerminalLog: dpkg: error processing package passwd (--configure): package is in a very bad inconsistent state; you should reinstall it before attempting configuration ErrorMessage: package is in a very bad inconsistent state; you should reinstall it before attempting configuration InstallationDate: Installed on 2020-01-12 (0 days ago) InstallationMedia: Ubuntu 16.04.6 LTS "Xenial Xerus" - Release amd64 (20190227) RelatedPackageVersions: dpkg 1.18.4ubuntu1.6 apt 1.2.32 SourcePackage: shadow Title: package passwd 1:4.2-3.1ubuntu5.4 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: shadow (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to shadow in Ubuntu. https://bugs.launchpad.net/bugs/1859351 Title: package passwd 1:4.2-3.1ubuntu5.4 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration Status in shadow package in Ubuntu: New Bug description: This is failed to install. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: passwd 1:4.2-3.1ubuntu5.4 ProcVersionSignature: Ubuntu 4.15.0-74.83~16.04.1-generic 4.15.18 Uname: Linux 4.15.0-74-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.21 AptOrdering: passwd: Configure NULL: ConfigurePending Architecture: amd64 Date: Sun Jan 12 23:16:37 2020 DpkgTerminalLog: dpkg: error processing package passwd (--configure): package is in a very bad inconsistent state; you should reinstall it before attempting configuration ErrorMessage: package is in a very bad inconsistent state; you should reinstall it before attempting configuration InstallationDate: Installed on 2020-01-12 (0 days ago) InstallationMedia: Ubuntu 16.04.6 LTS "Xenial Xerus" - Release amd64 (20190227) RelatedPackageVersions: dpkg 1.18.4ubuntu1.6 apt 1.2.32 SourcePackage: shadow Title: package passwd 1:4.2-3.1ubuntu5.4 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/shadow/+bug/1859351/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1511244] Re: Mouse pointer flickers at using DisplayLink
** Changed in: xorg (Ubuntu) Status: Expired => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1511244 Title: Mouse pointer flickers at using DisplayLink Status in xorg package in Ubuntu: Confirmed Bug description: I have a three screen setup, the built-in laptop screen, a monitor connected directly into the laptop via DisplayPort, and a monitor connected via a USB DisplayLink Adapter. What happens is that when a monitor is connected via the USB DisplayLink Adapter, the mouse icon flickers only on the laptop screen and monitor connected via DisplayPort (not on the monitor connected via USB DisplayLink Adapter). However, this is also reproducible if I either deactivate the built-in laptop screen, or disconnect the DisplayPort connected monitor. WORKAROUND: Disconnect the USB DisplayLink Adapter for the computer. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.19.0-31.36~14.04.1-generic 3.19.8-ckt7 Uname: Linux 3.19.0-31-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.18 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Thu Oct 29 08:29:50 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:503c] InstallationDate: Installed on 2015-09-25 (33 days ago) InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805) MachineType: LENOVO 20DT0003GE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-31-generic root=UUID=500f2ef6-7426-42ec-9fe2-88e9bcea ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/25/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JDET50WW (1.12 ) dmi.board.asset.tag: Not Available dmi.board.name: Intel powered classmate PC dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJDET50WW(1.12):bd03/25/2015:svnLENOVO:pn20DT0003GE:pvrThinkPadL450:rvnLENOVO:rnIntelpoweredclassmatePC:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20DT0003GE dmi.product.version: ThinkPad L450 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Oct 29 07:45:59 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id9782 vendor ENC xserver.version: 2:1.15.1-0ubuntu2.7 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1511244/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859354] [NEW] xprinter xp-c2008 not to join ubuntu
Public bug reported: xprinter xp-c2008 not to join ubuntu ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: cups 2.2.7-1ubuntu2.7 ProcVersionSignature: Ubuntu 5.0.0-32.34~18.04.2-generic 5.0.21 Uname: Linux 5.0.0-32-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Jan 13 01:25:55 2020 InstallationDate: Installed on 2019-09-20 (114 days ago) InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) Lpstat: device for Follow-Me: smb://printservice.utwente.nl/Follow-Me MachineType: Dell Inc. Inspiron 3558 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/Follow-Me.ppd'] failed with exit code 2: grep: /etc/cups/ppd/Follow-Me.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-32-generic root=UUID=ddb1a77a-b195-4fb6-945f-df8dd841be84 ro quiet splash vt.handoff=1 SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/20/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0G1TDD dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA08:bd01/20/2016:svnDellInc.:pnInspiron3558:pvr:rvnDellInc.:rn0G1TDD:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Inspiron 3558 dmi.product.sku: 06B0 dmi.sys.vendor: Dell Inc. ** Affects: cups (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apparmor apport-bug bionic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1859354 Title: xprinter xp-c2008 not to join ubuntu Status in cups package in Ubuntu: New Bug description: xprinter xp-c2008 not to join ubuntu ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: cups 2.2.7-1ubuntu2.7 ProcVersionSignature: Ubuntu 5.0.0-32.34~18.04.2-generic 5.0.21 Uname: Linux 5.0.0-32-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Jan 13 01:25:55 2020 InstallationDate: Installed on 2019-09-20 (114 days ago) InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) Lpstat: device for Follow-Me: smb://printservice.utwente.nl/Follow-Me MachineType: Dell Inc. Inspiron 3558 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/Follow-Me.ppd'] failed with exit code 2: grep: /etc/cups/ppd/Follow-Me.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-32-generic root=UUID=ddb1a77a-b195-4fb6-945f-df8dd841be84 ro quiet splash vt.handoff=1 SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/20/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0G1TDD dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA08:bd01/20/2016:svnDellInc.:pnInspiron3558:pvr:rvnDellInc.:rn0G1TDD:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Inspiron 3558 dmi.product.sku: 06B0 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1859354/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1847570] Re: PulseAudio automatically switches to HDMI sound output on login
** Bug watch removed: Xfce Bugzilla #16335 https://bugzilla.xfce.org/show_bug.cgi?id=16335 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1847570 Title: PulseAudio automatically switches to HDMI sound output on login Status in PulseAudio: Fix Released Status in pulseaudio package in Ubuntu: Fix Released Status in pulseaudio source package in Eoan: Fix Committed Status in pulseaudio source package in Focal: Fix Released Bug description: [Impact] On my freshly installed eoan system I have two output devices: - HDMI/DisplayPort 2 - GK208 ... - Line Out - Family 17h ... When I login into the system pulseaudio always select the "wrong" one (HDMI) and I need to go to gnome-settings/Sound/Output Device and switch to "line out". This applies to every login/logout not just reboots. [Test Case] 0. Plug in a monitor that supports HDMI audio (one that appears in your Settings>Sound) 1. Log out and in again. Verify the default audio device in Settings is still speakers or headphones. Not the monitor's HDMI audio device. [Regression Potential] The behaviour is changed back to what it was before 19.10, some users might find it inconvenient and prefer the auto switch but the feedback we got shows it's unreliable and an annoying for the majority of our users so we will got back to default to safest behaviour. The fix proposed just reverts to the same code used in PulseAudio 12 and earlier. It has also been released and verified on focal already. [Workaround] Comment out: load-module module-switch-on-port-available load-module module-switch-on-connect from /etc/pulse/default.pa To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1847570/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1831736] Re: [MIR] lz4 by default
** No longer affects: partman-auto (Ubuntu) ** Changed in: initramfs-tools (Ubuntu) Importance: Undecided => High ** Changed in: linux (Ubuntu) Importance: Undecided => High ** Changed in: live-build (Ubuntu) Importance: Undecided => High ** Changed in: livecd-rootfs (Ubuntu) Importance: Undecided => High ** Changed in: lz4 (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/1831736 Title: [MIR] lz4 by default Status in Release Upgrader: New Status in initramfs-tools package in Ubuntu: Fix Released Status in linux package in Ubuntu: Fix Released Status in live-build package in Ubuntu: Fix Released Status in livecd-rootfs package in Ubuntu: Fix Released Status in lz4 package in Ubuntu: Fix Released Status in ubuntu-release-upgrader package in Ubuntu: Invalid Bug description: Use `lz4 -9 -l` compression for initramfs by default as discussed on ubuntu-devel. This would also pull the lz4 package into main https://lists.ubuntu.com/archives/ubuntu-devel/2019-June/040726.html [Regression Potential] We are trying to optimize for total boot speed, but performing a micro-optimization upon time to create/unpack kernel/initrd is an insufficient benchmark for total boot speed. This is because it ignores time to load the kernel/initrd, and whether the firmware/bootloader were able to stream decompress it whilst loading it. I.e. it is argued that in the real world, subsecond decompression gains are irrelevant if UEFI firmware, tftp boot, etc. take a lot longer than that to read extra 10s of MBs of boot material. [TODO] Measure pure i/o load speed with stopwatch, to figure out MB/s speed of loading initrds/kernel off FAT32, EXT4, TFTP, HTTP. Re-evaluate if we should provide different compression mechanisms: - ie. gzip instead of lz4 for most cases (revert) - ie. xz for painful i/o cases (e.g. netboot) I booted grub2 and measured loading largish amount of files, ie. $ date; initrd (hd0,gpt5)/initrd.img; initrd (hd0,gpt5)/initrd.img; initrd (hd0,gpt5)/initrd.img; initrd (hd0,gpt5)/initrd.img; initrd (hd0,gpt5)/initrd.img; date To get a rough speed between 30 and 44 MB/s of loading these files off ext4 on nvme. With lz4 initrd taking 67M, and gzip initrd taking 59M, the grub i/o penalty is 0.18s whilst I gain over a second in faster decompression time. Overall a win. xz initrd is 36M meaning saving e.g. 0.8s of i/o time whilst gaining 2.4s of decompression time, meaning overall worse than gzip. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-upgrader/+bug/1831736/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1856574] Re: removal of various autopilot packages
python-testtools (2.3.0-6build1) focal; urgency=medium * No-change rebuild to generate dependencies on python2. -- Matthias Klose Tue, 17 Dec 2019 12:53:30 + python-testtools (2.3.0-6) unstable; urgency=medium [ Mattia Rizzolo ] * Remove Robert Collins from uploaders, as he has retired. Closes: #920508 [ Ondřej Nový ] * Running wrap-and-sort -bast. * Use debhelper-compat instead of debian/compat. [ Thomas Goirand ] * Removed Python 2 support (Closes: #938215). -- Thomas Goirand Sat, 14 Sep 2019 18:51:58 +0200 ** Changed in: python-testtools (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python-testtools in Ubuntu. https://bugs.launchpad.net/bugs/1856574 Title: removal of various autopilot packages Status in autopilot-gtk package in Ubuntu: Fix Released Status in autopilot-legacy package in Ubuntu: Fix Released Status in python-fixtures package in Ubuntu: Fix Released Status in python-testtools package in Ubuntu: Fix Released Bug description: python-fixtures and python-testtools are not built anymore in focal, but still referenced by some Ubuntu-only packages. We need to at least remove autopilot-legacy if we don't want to re-introduce those package, and modify autopilot-gtk to build witout the autopilot-legacy b-d. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/autopilot-gtk/+bug/1856574/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1856574] Re: removal of various autopilot packages
python-fixtures (3.0.0-3build1) focal; urgency=medium * No-change rebuild to generate dependencies on python2. -- Matthias Klose Tue, 17 Dec 2019 12:52:51 + python-fixtures (3.0.0-3) unstable; urgency=medium * Removed d/gbp.conf. * Ran wrap-and-sort -bast. * Point VCS fields to Salsa. * Adopt the package in the OpenStack team, since Robert Collins resigned from Debian (Closes: #920510). * Removed build-dependency on python-docutils (Closes: #635259). * Removed Python 2 support (Closes: #937756). * Use python3 -m testtools.run fixtures.test_suite to run tests. * Removed build-dependency on python3-nose. * Standards-Version is now 4.4.0. -- Thomas Goirand Sun, 15 Sep 2019 17:27:02 +0200 ** Changed in: python-fixtures (Ubuntu) Status: Fix Committed => Fix Released ** Changed in: autopilot-legacy (Ubuntu) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to python-testtools in Ubuntu. https://bugs.launchpad.net/bugs/1856574 Title: removal of various autopilot packages Status in autopilot-gtk package in Ubuntu: Fix Released Status in autopilot-legacy package in Ubuntu: Fix Released Status in python-fixtures package in Ubuntu: Fix Released Status in python-testtools package in Ubuntu: Fix Released Bug description: python-fixtures and python-testtools are not built anymore in focal, but still referenced by some Ubuntu-only packages. We need to at least remove autopilot-legacy if we don't want to re-introduce those package, and modify autopilot-gtk to build witout the autopilot-legacy b-d. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/autopilot-gtk/+bug/1856574/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859376] [NEW] Problems with updates
Public bug reported: When you want to install the updates, the manager says that the packages are broken and that you try again. I did it and it didn't work, so I tried to update through the terminal and it didn't work either. I would like to receive help with this problem. Thank you ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-66.75-generic 4.15.18 Uname: Linux 4.15.0-66-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sun Jan 12 18:55:35 2020 DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0156] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] 3rd Gen Core processor Graphics Controller [1025:0742] InstallationDate: Installed on 2018-07-02 (559 days ago) InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64 (20130820.1) Lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c17 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer V5-131 ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-66-generic root=UUID=a61bcc7e-d9c3-4e26-9abd-45c28eb06478 ro drm.debug=0xe plymouth:debug Renderer: Software SourcePackage: xorg UpgradeStatus: Upgraded to bionic on 2018-12-13 (395 days ago) dmi.bios.date: 03/22/2013 dmi.bios.vendor: Acer dmi.bios.version: V2.17 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.17 dmi.modalias: dmi:bvnAcer:bvrV2.17:bd03/22/2013:svnAcer:pnV5-131:pvrV2.17:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.17: dmi.product.family: Type1Family dmi.product.name: V5-131 dmi.product.version: V2.17 dmi.sys.vendor: Acer version.compiz: compiz 1:0.9.13.1+18.04.20180302-0ubuntu1 version.libdrm2: libdrm2 2.4.97-1ubuntu1~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.8-0ubuntu0~18.04.3 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.8-0ubuntu0~18.04.3 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4.3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.5-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 xserver.bootTime: Fri Jan 3 21:00:06 2020 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.19.6-1ubuntu4.3 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859376 Title: Problems with updates Status in xorg package in Ubuntu: New Bug description: When you want to install the updates, the manager says that the packages are broken and that you try again. I did it and it didn't work, so I tried to update through the terminal and it didn't work either. I would like to receive help with this problem. Thank you ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-66.75-generic 4.15.18 Uname: Linux 4.15.0-66-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sun Jan 12 18:55:35 2020 DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0156] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] 3rd Gen Core processor Graphics Controller [1025:0742] InstallationDate: Installed on 2018-07-02 (559 days ago) InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64 (20130820.1) Lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c17 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Machine
[Touch-packages] [Bug 1854403] Re: Need updated libimobiledevice and dependencies to access iOS 13 devices
I can't test the latest packages fully because I'm running eoan but I did install the packages from focal and it didn't work, while I'm home- built binaries from mid october do work, so maybe some regressed? The usbmuxd upgrade is fine, but libimobiledevice/libusbmuxd is what breaks it. I can't disentangle those two because the so version changed. I also tried installing focal in a VM - the pass through behaviour is not perfect, but the problems were the same. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libimobiledevice in Ubuntu. https://bugs.launchpad.net/bugs/1854403 Title: Need updated libimobiledevice and dependencies to access iOS 13 devices Status in libimobiledevice package in Ubuntu: Incomplete Status in libplist package in Ubuntu: Confirmed Status in libusbmuxd package in Ubuntu: Confirmed Status in usbmuxd package in Ubuntu: Confirmed Bug description: iOS 13 devices require updated libimobiledevice, libusbmuxd and usbmuxd to work correctly. Without the updates, the device appears to be accessible but it's impossible to copy files to the devices. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libimobiledevice/+bug/1854403/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859376] Re: Problems with updates
Thank you for taking the time to report this issue and helping to make Ubuntu better. Examining the information you have given us, this does not appear to be a bug report so we are closing it and converting it to a question in the support tracker. We understand the difficulties you are facing, but it is better to raise problems you are having in the support tracker at https://answers.launchpad.net/ubuntu if you are uncertain if they are bugs. You can also find help with your problem in the support forum of your local Ubuntu community http://loco.ubuntu.com/ or asking at https://askubuntu.com or https://ubuntuforums.org, or for more support options please look at https://discourse.ubuntu.com/t/community- support/709. For help on reporting bugs, see https://help.ubuntu.com/community/ReportingBugs. ** Changed in: xorg (Ubuntu) Status: New => Invalid ** Converted to question: https://answers.launchpad.net/ubuntu/+source/xorg/+question/687946 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859376 Title: Problems with updates Status in xorg package in Ubuntu: Invalid Bug description: When you want to install the updates, the manager says that the packages are broken and that you try again. I did it and it didn't work, so I tried to update through the terminal and it didn't work either. I would like to receive help with this problem. Thank you ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-66.75-generic 4.15.18 Uname: Linux 4.15.0-66-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sun Jan 12 18:55:35 2020 DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0156] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] 3rd Gen Core processor Graphics Controller [1025:0742] InstallationDate: Installed on 2018-07-02 (559 days ago) InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release amd64 (20130820.1) Lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c17 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer V5-131 ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-66-generic root=UUID=a61bcc7e-d9c3-4e26-9abd-45c28eb06478 ro drm.debug=0xe plymouth:debug Renderer: Software SourcePackage: xorg UpgradeStatus: Upgraded to bionic on 2018-12-13 (395 days ago) dmi.bios.date: 03/22/2013 dmi.bios.vendor: Acer dmi.bios.version: V2.17 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.17 dmi.modalias: dmi:bvnAcer:bvrV2.17:bd03/22/2013:svnAcer:pnV5-131:pvrV2.17:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.17: dmi.product.family: Type1Family dmi.product.name: V5-131 dmi.product.version: V2.17 dmi.sys.vendor: Acer version.compiz: compiz 1:0.9.13.1+18.04.20180302-0ubuntu1 version.libdrm2: libdrm2 2.4.97-1ubuntu1~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.8-0ubuntu0~18.04.3 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.8-0ubuntu0~18.04.3 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4.3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.5-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 xserver.bootTime: Fri Jan 3 21:00:06 2020 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.19.6-1ubuntu4.3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1859376/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1511244] Re: Mouse pointer flickers at using DisplayLink
Ubuntu 14.04 reached end of standard support in April 2019 so if you still experience any problems then please open a fresh new bug by running: ubuntu-bug xorg-server ** Changed in: xorg (Ubuntu) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1511244 Title: Mouse pointer flickers at using DisplayLink Status in xorg package in Ubuntu: Won't Fix Bug description: I have a three screen setup, the built-in laptop screen, a monitor connected directly into the laptop via DisplayPort, and a monitor connected via a USB DisplayLink Adapter. What happens is that when a monitor is connected via the USB DisplayLink Adapter, the mouse icon flickers only on the laptop screen and monitor connected via DisplayPort (not on the monitor connected via USB DisplayLink Adapter). However, this is also reproducible if I either deactivate the built-in laptop screen, or disconnect the DisplayPort connected monitor. WORKAROUND: Disconnect the USB DisplayLink Adapter for the computer. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.19.0-31.36~14.04.1-generic 3.19.8-ckt7 Uname: Linux 3.19.0-31-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.18 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Thu Oct 29 08:29:50 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:503c] InstallationDate: Installed on 2015-09-25 (33 days ago) InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805) MachineType: LENOVO 20DT0003GE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-31-generic root=UUID=500f2ef6-7426-42ec-9fe2-88e9bcea ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/25/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JDET50WW (1.12 ) dmi.board.asset.tag: Not Available dmi.board.name: Intel powered classmate PC dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJDET50WW(1.12):bd03/25/2015:svnLENOVO:pn20DT0003GE:pvrThinkPadL450:rvnLENOVO:rnIntelpoweredclassmatePC:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20DT0003GE dmi.product.version: ThinkPad L450 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.6 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu Oct 29 07:45:59 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id9782 vendor ENC xserver.version: 2:1.15.1-0ubuntu2.7 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1511244/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859071] Re: Secondary monitor unpredictable behavior at boot
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please execute the following command only once, as it will automatically gather debugging information, in a terminal: apport-collect 1859071 When reporting bugs in the future please use apport by using 'ubuntu- bug' and the name of the package affected. You can learn more about this functionality at https://wiki.ubuntu.com/ReportingBugs. ** Tags added: disco ** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu) ** Changed in: xorg-server (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859071 Title: Secondary monitor unpredictable behavior at boot Status in xorg-server package in Ubuntu: Incomplete Bug description: $ lsb_release -rd Description: Ubuntu 19.10 Release: 19.10 $ apt-cache policy gdm3 gdm3: Installed: 3.34.1-1ubuntu1 Candidate: 3.34.1-1ubuntu1 Version table: *** 3.34.1-1ubuntu1 500 500 http://us.archive.ubuntu.com/ubuntu eoan/main amd64 Packages 100 /var/lib/dpkg/status $ apt-cache policy lightdm lightdm: Installed: 1.30.0-0ubuntu1 Candidate: 1.30.0-0ubuntu1 Version table: *** 1.30.0-0ubuntu1 500 500 http://us.archive.ubuntu.com/ubuntu eoan/universe amd64 Packages 100 /var/lib/dpkg/status $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) I have a 3rd gen Intel laptop with only Ubuntu 19.10 installed, and a monitor attached via DisplayPort. The monitor has a native resolution of 2560x1080. When I power on my laptop, it is seemingly random whether one of the three following situations occurs. 1. Displays at the proper native resolution of 2560x1080, 2. Displays at 1600x1200 but not let me select a higher resolution in display settings, or 3. The display will fail to connect and stay blank (when I enter display settings it will be on "Single Monitor" mode, but from there I can enable Join Displays and set it to its native resolution). Please note I selected "I don't know" instead of gdm3 or lightdm since i've been having this issue since before installing/switching to lightdm. Please let me know what additional information I can provide at this time. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1859071/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859173] Re: display
Can you please provide a screenshot of the problem? ** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) ** Changed in: gnome-shell (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859173 Title: display Status in gnome-shell package in Ubuntu: Incomplete Bug description: i comandi e la barra superiore sbordano, non riesco a visualizzarli ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-38.41-generic 5.0.21 Uname: Linux 5.0.0-38-generic x86_64 ApportVersion: 2.20.10-0ubuntu27.3 Architecture: amd64 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Jan 10 13:12:16 2020 DistUpgraded: 2020-01-10 07:57:08,409 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Esecuzione del processo figlio «./xorg_fix_proprietary.py» non riuscita (File o directory non esistente) (8)) DistroCodename: disco DistroVariant: ubuntu GraphicsCard: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] [1106:3108] (rev 01) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] [1043:8129] InstallationDate: Installed on 2020-01-08 (2 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) MachineType: System manufacturer System Product Name ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=it_IT.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-38-generic root=UUID=943bdf0d-bfd4-4e4d-b427-5c0ac904be90 ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to disco on 2020-01-10 (0 days ago) dmi.bios.date: 09/12/2005 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0203 dmi.board.name: K8V-MX dmi.board.vendor: ASUSTeK Computer Inc. dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 6 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0203:bd09/12/2005:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerInc.:rnK8V-MX:rvr:cvnChassisManufacture:ct6:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.8-0ubuntu0~19.04.1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1859173/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859353] [NEW] software-properties-gtk not working
You have been subscribed to a public bug: Additional Drivers /Software & Update not working Hello, I am running :- Description: Ubuntu 19.10 Release: 19.10 software-properties-gtk: Installed: 0.98.5 Candidate: 0.98.5 Version table: *** 0.98.5 500 500 http://ca.archive.ubuntu.com/ubuntu eoan/main amd64 Packages 500 http://ca.archive.ubuntu.com/ubuntu eoan/main i386 Packages 100 /var/lib/dpkg/status I am trying to run Additional Drivers /Software & Update . But it opened once and froze and never opened again. When I try running the command:- $ sudo software-properties-gtk Did a remove and reinstall of the same, but did not work. It returns:- ERROR:dbus.proxies:Introspect error on :1.2559:/: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replying Traceback (most recent call last): File "/usr/bin/software-properties-gtk", line 100, in app = SoftwarePropertiesGtk(datadir=options.data_dir, options=options, file=file) File "/usr/lib/python3/dist-packages/softwareproperties/gtk/SoftwarePropertiesGtk.py", line 175, in __init__ self.backend.Reload(); File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 72, in __call__ return self._proxy_method(*args, **keywords) File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 147, in __call__ **keywords) File "/usr/lib/python3/dist-packages/dbus/connection.py", line 653, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name :1.2559 was not provided by any .service files Also, the syslog says:- name='com.ubuntu.SoftwareProperties' requested by ':1.2455' (uid=1000 pid=2267 comm="/usr/bin/python3 /usr/bin/software-properties-gtk " label="unconfined") (using servicehelper) Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: Unable to init server: Could not connect: Connection refused Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: Unable to init server: Could not connect: Connection refused Jan 12 11:58:55 gillZ dbus-daemon[2192]: [system] Successfully activated service 'com.ubuntu.SoftwareProperties' Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: Traceback (most recent call last): Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: File "/usr/lib/software-properties/software-properties-dbus", line 68, in Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: server = SoftwarePropertiesDBus(bus, datadir=datadir) Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: File "/lib/python3/dist-packages/softwareproperties/dbus/SoftwarePropertiesDBus.py", line 66, in __init__ Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: self._livepatch_service = LivepatchService() Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: File "/lib/python3/dist-packages/softwareproperties/LivepatchService.py", line 93, in __init__ Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: self._session = requests_unixsocket.Session() Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: NameError: name 'requests_unixsocket' is not defined Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: ERROR:dbus.proxies:Introspect error on :1.2457:/: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replying Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: Traceback (most recent call last): Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/bin/software-properties-gtk", line 100, in Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: app = SoftwarePropertiesGtk(datadir=options.data_dir, options=options, file=file) Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/lib/python3/dist-packages/softwareproperties/gtk/SoftwarePropertiesGtk.py", line 175, in __init__ Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: self.backend.Reload(); Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 72, in __call__ Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: return self._proxy_method(*args, **keywords) Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 147, in __call__ Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: **keywords) Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/lib/python3/dist-packages/dbus/connection.py", line 653, in call_blocking ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New ** Tags: eoan -- software-properties-gtk not working https://bugs.launchpad.net/bugs/1859353 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. -- M
[Touch-packages] [Bug 1859326] Re: When I logut and try to log in, the password field is hidden
** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859326 Title: When I logut and try to log in, the password field is hidden Status in gnome-shell package in Ubuntu: New Bug description: Hello, I have upgraded from Ubuntu 19.04 to Ubuntu 19.10. Now, When I logout, the lock-screen background is shown on the screen, usaully i used to press any button, then the lock-screen moves up, and the user login form appears, but now the login form never appears, only the lock-screen taking all of the screen, and I have to enter the password without seeing the form and press Enter to log in, I can't even see which user is selected. Thanks in advance. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.3.0-26.28-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..0a.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:0a:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 430.50 Thu Sep 5 22:36:31 CDT 2019 GCC version: gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2) ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun Jan 12 14:24:27 2020 DistUpgraded: 2020-01-12 13:15:58,832 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Failed to execute child process “./xorg_fix_proprietary.py” (No such file or directory) (8)) DistroCodename: eoan DistroVariant: ubuntu DkmsStatus: nvidia, 430.50, 5.0.0-38-generic, x86_64: installed nvidia, 430.50, 5.3.0-26-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Haswell-ULT Integrated Graphics Controller [103c:2166] Subsystem: Hewlett-Packard Company GK208M [GeForce GT 740M] [103c:2166] InstallationDate: Installed on 2019-05-02 (255 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) Lsusb: Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 04f2:b40e Chicony Electronics Co., Ltd HP Truevision HD camera Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=0335c8fd-b7c3-4fc4-bf52-2a78bfe22f38 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to eoan on 2020-01-12 (0 days ago) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.23 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 2166 dmi.board.vendor: Hewlett-Packard dmi.board.version: 29.40 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.23:bd09/26/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr08971030410610100:rvnHewlett-Packard:rn2166:rvr29.40:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV G=N L=CON B=HP S=PAV X=Null dmi.product.name: HP Pavilion 15 Notebook PC dmi.product.sku: F1E53EA#ABV dmi.product.version: 08971030410610100 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.99-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.2.1-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.5+git20191008-0ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-1ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20190815-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1859326/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe
[Touch-packages] [Bug 1859339] Re: Freeze
Thank you for taking the time to report this bug and helping to make Ubuntu better. It sounds like some part of the system has crashed. To help us find the cause of the crash please follow these steps: 1. Look in /var/crash for crash files and if found run: ubuntu-bug YOURFILE.crash Then tell us the ID of the newly-created bug. 2. If step 1 failed then look at https://errors.ubuntu.com/user/ID where ID is the content of file /var/lib/whoopsie/whoopsie-id on the machine. Do you find any links to recent problems on that page? If so then please send the links to us. 3. If step 2 also failed then apply the workaround from bug 994921, reboot, reproduce the crash, and retry step 1. Please take care to avoid attaching .crash files to bugs as we are unable to process them as file attachments. It would also be a security risk for yourself. ** Package changed: xorg (Ubuntu) => ubuntu ** Changed in: ubuntu Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1859339 Title: Freeze Status in Ubuntu: Incomplete Bug description: Freeze screen, keyboard block, mouse smile, activity in court frozen regularly. only possibility to restart in force. it also restarts itself regularly. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21 Uname: Linux 5.0.0-37-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sun Jan 12 17:30:29 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c8) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7c51] InstallationDate: Installed on 2020-01-06 (6 days ago) InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) MachineType: Micro-Star International Co., Ltd. MS-7C51 ProcEnviron: PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=64715203-5a05-42f8-93df-f2967370ca5d ro quiet splash vt.handoff=1 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/03/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.10 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: A320M-A PRO (MS-7C51) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: To be filled by O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.10:bd09/03/2019:svnMicro-StarInternationalCo.,Ltd.:pnMS-7C51:pvr1.0:rvnMicro-StarInternationalCo.,Ltd.:rnA320M-APRO(MS-7C51):rvr1.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr1.0: dmi.product.family: To be filled by O.E.M. dmi.product.name: MS-7C51 dmi.product.sku: To be filled by O.E.M. dmi.product.version: 1.0 dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1ubuntu1~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.8-0ubuntu0~18.04.3 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.8-0ubuntu0~18.04.3 version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1859339/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859353] Re: software-properties-gtk not working
** Tags added: eoan ** Package changed: gnome-shell (Ubuntu) => software-properties (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1859353 Title: software-properties-gtk not working Status in software-properties package in Ubuntu: New Bug description: Additional Drivers /Software & Update not working Hello, I am running :- Description: Ubuntu 19.10 Release: 19.10 software-properties-gtk: Installed: 0.98.5 Candidate: 0.98.5 Version table: *** 0.98.5 500 500 http://ca.archive.ubuntu.com/ubuntu eoan/main amd64 Packages 500 http://ca.archive.ubuntu.com/ubuntu eoan/main i386 Packages 100 /var/lib/dpkg/status I am trying to run Additional Drivers /Software & Update . But it opened once and froze and never opened again. When I try running the command:- $ sudo software-properties-gtk Did a remove and reinstall of the same, but did not work. It returns:- ERROR:dbus.proxies:Introspect error on :1.2559:/: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replying Traceback (most recent call last): File "/usr/bin/software-properties-gtk", line 100, in app = SoftwarePropertiesGtk(datadir=options.data_dir, options=options, file=file) File "/usr/lib/python3/dist-packages/softwareproperties/gtk/SoftwarePropertiesGtk.py", line 175, in __init__ self.backend.Reload(); File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 72, in __call__ return self._proxy_method(*args, **keywords) File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 147, in __call__ **keywords) File "/usr/lib/python3/dist-packages/dbus/connection.py", line 653, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name :1.2559 was not provided by any .service files Also, the syslog says:- name='com.ubuntu.SoftwareProperties' requested by ':1.2455' (uid=1000 pid=2267 comm="/usr/bin/python3 /usr/bin/software-properties-gtk " label="unconfined") (using servicehelper) Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: Unable to init server: Could not connect: Connection refused Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: Unable to init server: Could not connect: Connection refused Jan 12 11:58:55 gillZ dbus-daemon[2192]: [system] Successfully activated service 'com.ubuntu.SoftwareProperties' Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: Traceback (most recent call last): Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: File "/usr/lib/software-properties/software-properties-dbus", line 68, in Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: server = SoftwarePropertiesDBus(bus, datadir=datadir) Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: File "/lib/python3/dist-packages/softwareproperties/dbus/SoftwarePropertiesDBus.py", line 66, in __init__ Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: self._livepatch_service = LivepatchService() Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: File "/lib/python3/dist-packages/softwareproperties/LivepatchService.py", line 93, in __init__ Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: self._session = requests_unixsocket.Session() Jan 12 11:58:55 gillZ com.ubuntu.SoftwareProperties[2192]: NameError: name 'requests_unixsocket' is not defined Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: ERROR:dbus.proxies:Introspect error on :1.2457:/: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replying Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: Traceback (most recent call last): Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/bin/software-properties-gtk", line 100, in Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: app = SoftwarePropertiesGtk(datadir=options.data_dir, options=options, file=file) Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/lib/python3/dist-packages/softwareproperties/gtk/SoftwarePropertiesGtk.py", line 175, in __init__ Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: self.backend.Reload(); Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 72, in __call__ Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: return self._proxy_method(*args, **keywords) Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 147, in __call__ Jan 12 11:58:55 gillZ software-properties-drivers.desktop[3536]: **keywords) Jan 12 11:58:5
[Touch-packages] [Bug 1859390] [NEW] Blurred texts, icons and character typed on login screen after logout
You have been subscribed to a public bug: I login to my account normally. But, when I click on "switch user" from app indicator, the clock in login screen will be completely blurred, impossible even to perceive it is a clock/time, except if I wait one minute so that the last number will update and it will show correctly (only the last number). If I press enter or click-up, I see the login form with the same problem: I can see that there are two users but they are completely indistinguishable and blurred. If I click on it, I can type my password but still blurred, even the chars I type are blurred. The app indicator icons are blurred too, but when I put the cursor over them, instantly they are fixed. PS: I have two enabled monitors and two users, but the second user is not logged in. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: lightdm (not installed) ProcVersionSignature: Ubuntu 5.4.0-9.12-generic 5.4.3 Uname: Linux 5.4.0-9-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu15 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Jan 13 00:13:45 2020 InstallationDate: Installed on 2019-12-31 (13 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20191230) SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: lightdm (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- Blurred texts, icons and character typed on login screen after logout https://bugs.launchpad.net/bugs/1859390 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1859390] Re: Blurred texts, icons and character typed on login screen after logout
** Package changed: ubuntu => lightdm (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1859390 Title: Blurred texts, icons and character typed on login screen after logout Status in lightdm package in Ubuntu: New Bug description: I login to my account normally. But, when I click on "switch user" from app indicator, the clock in login screen will be completely blurred, impossible even to perceive it is a clock/time, except if I wait one minute so that the last number will update and it will show correctly (only the last number). If I press enter or click-up, I see the login form with the same problem: I can see that there are two users but they are completely indistinguishable and blurred. If I click on it, I can type my password but still blurred, even the chars I type are blurred. The app indicator icons are blurred too, but when I put the cursor over them, instantly they are fixed. PS: I have two enabled monitors and two users, but the second user is not logged in. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: lightdm (not installed) ProcVersionSignature: Ubuntu 5.4.0-9.12-generic 5.4.3 Uname: Linux 5.4.0-9-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu15 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Jan 13 00:13:45 2020 InstallationDate: Installed on 2019-12-31 (13 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Alpha amd64 (20191230) SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1859390/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1852411] Re: systemd resolver not working
[Expired for systemd (Ubuntu) because there has been no activity for 60 days.] ** Changed in: systemd (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1852411 Title: systemd resolver not working Status in systemd package in Ubuntu: Expired Bug description: resolv.conf holds after boot: nameserver 127.0.0.53 options edns0 [...] Trying to resolve google.com just leads to nothing. Same for any address you try to resolve. Systemd just does not forward to the given resolver address in /etc/systemd/resolved.conf: [Resolve] DNS=172.18.8.1 #FallbackDNS= Domains=bfs.de bfs.intern lab.bfs.de rodos.bfs.de #LLMNR=no #MulticastDNS=no #DNSSEC=no #DNSOverTLS=no #Cache=yes #DNSStubListener=yes #ReadEtcHosts=yes Copying the address given vor variable DNS in /etc/systemd/resolved.conf to nameserver in /etc/resolve.conf makes everything working immediately. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: systemd 242-7ubuntu3 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.2 Architecture: amd64 Date: Wed Nov 13 10:23:18 2019 InstallationDate: Installed on 2019-09-09 (64 days ago) InstallationMedia: Xubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) Lsusb: Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: VMware, Inc. VMware Virtual Platform ProcEnviron: LANGUAGE=de_DE TERM=screen PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-5.3.0-19-generic root=UUID=f99c1b40-4de7-4f4c-9d3f-c32918aa952c ro rootflags=subvol=@ quiet splash SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/29/2019 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/29/2019:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. mtime.conffile..etc.systemd.resolved.conf: 2019-09-24T10:52:27.095603 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1852411/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1843479] Re: gzip in Ubuntu Eoan results in Exec format error on WSL1
This bug was fixed in the package binutils - 2.33-2ubuntu1.2 --- binutils (2.33-2ubuntu1.2) eoan; urgency=medium * Rebuild for the -security pocket binutils (2.33-2ubuntu1.1) eoan; urgency=medium * Cherry-pick from binutils master branch: PR25237, set no file contents PT_LOAD p_offset to first page (LP: #1843479) -- Balint Reczey Thu, 19 Dec 2019 12:46:41 +0100 ** Changed in: binutils (Ubuntu Eoan) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1843479 Title: gzip in Ubuntu Eoan results in Exec format error on WSL1 Status in binutils: Confirmed Status in binutils package in Ubuntu: Fix Released Status in gzip package in Ubuntu: Fix Released Status in binutils source package in Eoan: Fix Released Status in gzip source package in Eoan: Fix Released Bug description: [Impact] * Running gzip on WSL1 results in the following error: $ gzip -bash: /bin/gzip: cannot execute binary file: Exec format error * The error occurs frequently in package updates and makes gzip inoperable on WSL1 * The problem is caused by PT_LOAD offset pointing past the end of file and the fix is fixing strip to not generate such ELF files and recompiling gzip with the fixed strip. [Test Case] * Check the gzip binary for wrong offset: $ FILE=/usr/bin/gzip; readelf -W --program-headers $FILE | awk -v size=$(stat -c %s $FILE) '/^ LOAD/ {if (strtonum($2) > size) {print "wrong offset ("$2" ("strtonum($2)") points past EOF:" size; exit 1;}}' [ Regression Potential ] * The binutils fix could cause binutils to generate invalid ELF files. The fix is very small and isolated and has been tested and accepted by upstream, which makes such problems unlikely. * Bugs in the toolchain in general can make the rebuilt gzip show new errors, but this generally applies to many SRUs and security updates. The testing period in proposed should mitigate this risk. [Other Info] * Binutils 2.33.1-6ubuntu1.1 was accidentally built in -proposed instead of in a PPA. I've rebuilt it in https://launchpad.net/~ci- train-ppa-service/+archive/ubuntu/3878 for the -security pocket as 2.33-2ubuntu1.2. [Originial Bug Text] Summary: Running gzip on WSL1 results in the following error: $ gzip -bash: /bin/gzip: cannot execute binary file: Exec format error What I expect to happen: gzip executes correctly on WSL1. What happens instead: gzip fails with an Exec format error. Notes: I suspect a change in how gzip is being built for Eoan is causing issues with ELF parsing on the WSL1 translation layer. For example: On Disco with gzip 1.9-3: $ file /bin/gzip /bin/gzip: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=efa859c26eaf8e035efe9a139361e2a60cd17b3e, stripped On Eoan with gzip 1.10-0ubuntu3: $ file /bin/gzip /bin/gzip: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=bc0f5994544c2a469d04c914bf4bf44b4ded6040, for GNU/Linux 3.2.0, stripped Eoan ships with gzip 1.10, while Disco ships with gzip 1.9, but I do not believe this is an issue in 1.10 because this error does not occur when building gzip from GNU project source on Ubuntu Eoan. Justifications: WSL1 will need to be patched in future Windows builds for this change in ELF. However that patch will likely not be backported to older builds of Windows, including Windows Enterprise/Server 2019. To ensure Eoan can run on current and older builds of Windows Ubuntu should consider looking at how it's building gzip and see if it can be made to 'play nice' until WSL1 can be updated. This was originally reported here: https://github.com/microsoft/WSL/issues/4461 Details: Description:Ubuntu Eoan Ermine (development branch) Release:19.10 gzip: Installed: 1.10-0ubuntu3 Candidate: 1.10-0ubuntu3 Version table: *** 1.10-0ubuntu3 500 500 http://archive.ubuntu.com/ubuntu eoan/main amd64 Packages 100 /var/lib/dpkg/status To manage notifications about this bug go to: https://bugs.launchpad.net/binutils/+bug/1843479/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 21837] Re: debdelta integration / zsync support
Security updates should be delta updates. If the update is too large, some people might not download and install it. Feature updates are not that important. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/21837 Title: debdelta integration / zsync support Status in apt package in Ubuntu: Triaged Status in apt package in Baltix: Confirmed Bug description: Ubuntu should, like Mandrake 10.2, Firefox 1.5 and Windows, update packages using binary patches instead of by re-downloading entire packages. This would be especially helpful when running beta versions of software which change daily. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/21837/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp