I read this full issue report and replies and it seems I am experienced
an analogous problem. Should I report the details of my case here or
open a new issue?

Here are few initial information:

lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 16.04.1 LTS
Release:        16.04
Codename:       xenial

uname -a:
Linux mangue 4.4.0-42-generic #62-Ubuntu SMP Fri Oct 7 23:11:45 UTC 2016 x86_64 
x86_64 x86_64 GNU/Linux

lsusb:
Bus 005 Device 025: ID 04e8:3301 Samsung Electronics Co., Ltd ML-1660 Series

/var/log/syslog: (the block below keeps popping out continuously)

Oct 10 20:11:27 mangue kernel: [ 1594.728192] usb 5-2: reset full-speed USB 
device number 40 using uhci_hcd
Oct 10 20:11:27 mangue kernel: [ 1594.885385] usb 5-2: USB disconnect, device 
number 40
Oct 10 20:11:27 mangue kernel: [ 1594.885804] usblp1: removed
Oct 10 20:11:27 mangue udev-configure-printer[6009]: remove 
/devices/pci0000:00/0000:00:1d.0/usb5/5-2
Oct 10 20:11:27 mangue kernel: [ 1595.000098] usb 5-2: new full-speed USB 
device number 41 using uhci_hcd
Oct 10 20:11:28 mangue kernel: [ 1595.169199] usb 5-2: New USB device found, 
idVendor=04e8, idProduct=3301
Oct 10 20:11:28 mangue kernel: [ 1595.169209] usb 5-2: New USB device strings: 
Mfr=1, Product=2, SerialNumber=3
Oct 10 20:11:28 mangue kernel: [ 1595.169216] usb 5-2: Product: ML-1660 Series
Oct 10 20:11:28 mangue kernel: [ 1595.169222] usb 5-2: Manufacturer: Samsung 
Electronics Co., Ltd.
Oct 10 20:11:28 mangue kernel: [ 1595.169227] usb 5-2: SerialNumber: 
Z5ASBDAZ809914N.
Oct 10 20:11:28 mangue kernel: [ 1595.176325] usblp 5-2:1.0: usblp1: USB 
Bidirectional printer dev 41 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3301
Oct 10 20:11:28 mangue mtp-probe: checking bus 5, device 41: 
"/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2"
Oct 10 20:11:28 mangue mtp-probe: bus: 5, device: 41 was not an MTP device
Oct 10 20:11:28 mangue udev-configure-printer[5977]: no corresponding CUPS 
device found
Oct 10 20:11:28 mangue systemd[1]: Started Automatic USB/Bluetooth printer 
setup (-devices-pci0000:00-0000:00:1d.0-usb5-5\x2d2).
Oct 10 20:11:28 mangue systemd[1]: printer.target: Unit not needed anymore. 
Stopping.
Oct 10 20:11:28 mangue systemd[1]: Stopped target Printer.
Oct 10 20:11:28 mangue systemd[1]: Starting Automatic USB/Bluetooth printer 
setup (-devices-pci0000:00-0000:00:1d.0-usb5-5\x2d2)...
Oct 10 20:11:28 mangue systemd[1]: Reached target Printer.
Oct 10 20:11:28 mangue udev-configure-printer[6029]: add 
/devices/pci0000:00/0000:00:1d.0/usb5/5-2
Oct 10 20:11:28 mangue udev-configure-printer[6029]: device devpath is 
/devices/pci0000:00/0000:00:1d.0/usb5/5-2
Oct 10 20:11:28 mangue udev-configure-printer[6029]: MFG:Samsung MDL:ML-1660 
Series SERN:- serial:Z5ASBDAZ809914N.

I am using Unified Linux Driver, from Samsung's HP, since the printer
was not able to print without it. After installing it, the printer was
automatically discovered and I could print one page. After that, the
printer goes automatically to disabled state. Re-enabling it does not
work, since it is disable few seconds later.

The printer used to work normally up to last week, when my computer was
still running Ubuntu 14.04 (and Samsung Linux Driver).

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1495971

Title:
  Samsung ML-1250 prints only first job and then disconnects

Status in cups package in Ubuntu:
  New
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  We have:

  lsusb
  Bus 004 Device 009: ID 04e8:300e Samsung Electronics Co., Ltd Laser Printer

  Just connected printer and started to print first job:

  tail -f /var/log/syslog
  Sep 15 14:50:18 desktop udev-configure-printer: URI matches without serial 
number: usb://Samsung/ML-1250
  Sep 15 14:50:18 desktop udev-configure-printer: No serial number URI matches 
so using those without
  Sep 15 14:50:18 desktop udev-configure-printer: URI of detected printer: 
usb://Samsung/ML-1250, normalized: samsung ml 1250
  Sep 15 14:50:18 desktop udev-configure-printer: URI of print queue: 
usb://HP/LaserJet%201200?serial=00CNCF203187, normalized: laserjet 1200 serial 
00cncf203187
  Sep 15 14:50:18 desktop udev-configure-printer: About to add queue for 
usb://Samsung/ML-1250
  Sep 15 14:50:20 desktop udev-add-printer: add_queue: 
URIs=['usb://Samsung/ML-1250']
  Sep 15 14:50:20 desktop udev-add-printer: D-Bus method call failed: 
org.freedesktop.DBus.Error.ServiceUnknown: The name 
com.redhat.NewPrinterNotification was not provided by any .service files
  Sep 15 14:50:23 desktop udev-add-printer: PPD: 
foomatic-db-compressed-ppds:0/ppd/foomatic-ppd/Samsung-ML-1250-pxlmono.ppd; 
Status: 0
  Sep 15 14:50:24 desktop colord: Profile added: ML-1250-Gray..
  Sep 15 14:50:24 desktop colord: Device added: cups-ML-1250
  Sep 15 14:53:51 desktop kernel: [22676.268686] usblp0: removed
  Sep 15 14:54:03 desktop kernel: [22688.117044] usblp 4-2:1.0: usblp0: USB 
Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300E
  Sep 15 14:54:03 desktop kernel: [22688.117121] usblp0: removed
  Sep 15 14:54:03 desktop kernel: [22688.228040] usb 4-2: reset full-speed USB 
device number 4 using uhci_hcd
  Sep 15 14:54:03 desktop kernel: [22688.348039] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:03 desktop kernel: [22688.572040] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:04 desktop kernel: [22688.788044] usb 4-2: reset full-speed USB 
device number 4 using uhci_hcd
  Sep 15 14:54:04 desktop kernel: [22688.908039] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:04 desktop kernel: [22689.132029] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:04 desktop kernel: [22689.348038] usb 4-2: reset full-speed USB 
device number 4 using uhci_hcd
  Sep 15 14:54:05 desktop kernel: [22689.756029] usb 4-2: device not accepting 
address 4, error -71
  Sep 15 14:54:05 desktop kernel: [22689.868029] usb 4-2: reset full-speed USB 
device number 4 using uhci_hcd
  Sep 15 14:54:05 desktop kernel: [22690.276040] usb 4-2: device not accepting 
address 4, error -71
  Sep 15 14:54:05 desktop kernel: [22690.276130] usblp: can't set desired 
altsetting 0 on interface 0
  Sep 15 14:54:05 desktop kernel: [22690.276265] usb 4-2: USB disconnect, 
device number 4
  Sep 15 14:54:05 desktop udev-configure-printer: remove 
/devices/pci0000:00/0000:00:1a.1/usb4/4-2
  Sep 15 14:54:05 desktop udev-configure-printer: URI of detected printer: 
usb://Samsung/ML-1250, normalized: samsung ml 1250
  Sep 15 14:54:05 desktop udev-configure-printer: URI of print queue: 
usb://HP/LaserJet%201200?serial=00CNCF203187, normalized: laserjet 1200 serial 
00cncf203187
  Sep 15 14:54:05 desktop udev-configure-printer: URI of print queue: 
usb://Samsung/ML-1250, normalized: samsung ml 1250
  Sep 15 14:54:05 desktop udev-configure-printer: Queue 
ipp://localhost:631/printers/ML-1250 has matching device URI
  Sep 15 14:54:05 desktop udev-configure-printer: Disabled printer 
ipp://localhost:631/printers/ML-1250 as the corresponding device was unplugged 
or turned off
  Sep 15 14:54:05 desktop kernel: [22690.388029] usb 4-2: new full-speed USB 
device number 5 using uhci_hcd
  Sep 15 14:54:05 desktop kernel: [22690.508023] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:06 desktop kernel: [22690.732024] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:06 desktop kernel: [22690.948037] usb 4-2: new full-speed USB 
device number 6 using uhci_hcd
  Sep 15 14:54:06 desktop kernel: [22691.068035] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:06 desktop kernel: [22691.292039] usb 4-2: device descriptor 
read/64, error -71
  Sep 15 14:54:06 desktop kernel: [22691.508031] usb 4-2: new full-speed USB 
device number 7 using uhci_hcd
  Sep 15 14:54:07 desktop kernel: [22691.916031] usb 4-2: device not accepting 
address 7, error -71
  Sep 15 14:54:07 desktop kernel: [22692.028039] usb 4-2: new full-speed USB 
device number 8 using uhci_hcd
  Sep 15 14:54:07 desktop kernel: [22692.436036] usb 4-2: device not accepting 
address 8, error -71
  Sep 15 14:54:07 desktop kernel: [22692.436071] usb usb4-port2: unable to 
enumerate USB device
  Sep 15 14:55:01 desktop CRON[6650]: (master) CMD (~/temp/ipv6save)
  Sep 15 14:55:04 desktop CRON[6649]: (CRON) info (No MTA installed, discarding 
output)

  So as we see it prints first job and then disconnects for some unknown
  reason. lsusb also confirms it:

  lsusb
  Bus 002 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card 
Reader Controller
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 005 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
  Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 004 Device 002: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  The only workaround is to turn off and on the printer. I've checked it
  on two different desktops with the same result. Also I've tried
  another cable but it not helped.

  Some additional info:
  Kubuntu/Xubuntu 14.04.3 LTS
  Linux 3.19.0-28 x86_64
  Tried Samsung ML-1250 Foomatic/pxlmono recommended driver

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: udev 204-5ubuntu20.13
  ProcVersionSignature: Ubuntu 3.19.0-28.30~14.04.1-generic 3.19.8-ckt5
  Uname: Linux 3.19.0-28-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.13
  Architecture: amd64
  CurrentDesktop: KDE
  CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order 
/var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission 
denied
  CustomUdevRuleFiles: 60-ssd-scheduler.rules
  Date: Tue Sep 15 15:12:00 2015
  InstallationDate: Installed on 2014-04-01 (531 days ago)
  InstallationMedia: Kubuntu 14.04 LTS "Trusty Tahr" - Daily amd64 (20140331)
  MachineType: Hewlett-Packard HP Compaq dc7800p Small Form Factor
  ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-28-generic 
root=UUID=a8420fcb-26e9-480c-8cb0-7d33d308db8c ro rootflags=subvol=@ quiet 
splash vt.handoff=7
  SourcePackage: systemd
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/21/2011
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786F1 v01.32
  dmi.board.asset.tag: CZC81123H7
  dmi.board.name: 0AA8h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: CZC81123H7
  dmi.chassis.type: 4
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr786F1v01.32:bd07/21/2011:svnHewlett-Packard:pnHPCompaqdc7800pSmallFormFactor:pvr:rvnHewlett-Packard:rn0AA8h:rvr:cvnHewlett-Packard:ct4:cvr:
  dmi.product.name: HP Compaq dc7800p Small Form Factor
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1495971/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to     : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to