[Touch-packages] [Bug 1768232] Re: i915 driver issue in Ubuntu 18.04
@Tarik GRABA My system stuck at ubuntu logo while booting. To resolve it, I've set nomodeset. But now it occurs a resolution issue to 1024x768. In 'Try Ubuntu' it worked well. No such issue. I tried installing 4.16 kernel but not resolved. I've two HDD in system. In one Ubuntu 16.04.04 installed and other 18.04. No issue with 16.04.04. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1768232 Title: i915 driver issue in Ubuntu 18.04 Status in xorg package in Ubuntu: Confirmed Bug description: My system stuck at ubuntu logo while booting. To resolve it, I've set nomodeset. But now it occurs a resolution issue to 1024x768. Here are the necessary information: lspci -nnk | grep -iA2 vga 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] Kernel modules: i915, intelfb and xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm 1024x768 76.00* Output of sudo lshw -c display *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:e200-e207 ioport:c000(size=8) memory:d000-dfff memory:e208-e20b memory:c-d This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case. Intel Graphics Update Tool shows: Checking if Intel graphics card available... • checking for i915 module in /sys/module • i915 module found Checking if Intel graphics card available... OK Retrieving information from 01.org... • fetching https://download.01.org/gfx/ilg-config.cfg • saving to /home/test/.ilg-config • fetched 1626 bytes • fetched 9818 bytes • fetched 12301 bytes • looking up [Ubuntu bionic] configuration Retrieving information from 01.org... OK Checking distribution... Failed ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue May 1 17:16:20 2018 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: I just need to know a workaround GraphicsCard: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] InstallationDate: Installed on 2018-05-01 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Hewlett-Packard HP dx2080 MT(KS826PA) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=7ec4f610-9b62-44f3-867d-01abd93de14d ro quiet splash nomodeset vt.handoff=1 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "uxa" EndSection dmi.bios.date: 11/28/2007 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: V1.03 dmi.board.name: 0AD8h dmi.board.vendor: Board Manufacturer dmi.chassis.asset.tag: INA8100LFY dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrV1.03:bd11/28/2007:svnHewlett-Packard:pnHPdx2080MT(KS826PA):pvr:rvnBoardManufacturer:rn0AD8h:rvr:cvnHewlett-Packard:ct3:cvr: dmi.product.name: HP dx2080 MT(KS826PA) dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91+git1804271336.50426f~oibaf~b version.libgl1-mesa-dri: libgl1-mesa-dri 18.2~git1804301930.1c5f4f~oibaf~b version.libgl1-mesa-glx: libgl1-mesa-glx 18.2~git1804301930.1c5f4f~oibaf~b version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-x
[Touch-packages] [Bug 1768232] Re: i915 driver issue in Ubuntu 18.04
** Description changed: + My system stuck at ubuntu logo while booting. To resolve it, I've set + nomodeset. + + But now it occurs a resolution issue to 1024x768. Here are the necessary + information: + lspci -nnk | grep -iA2 vga 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) - Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] - Kernel modules: i915, intelfb - + Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] + Kernel modules: i915, intelfb and - xrandr + xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm -1024x768 76.00* + 1024x768 76.00* Output of sudo lshw -c display - *-display UNCLAIMED -description: VGA compatible controller -product: 82945G/GZ Integrated Graphics Controller -vendor: Intel Corporation -physical id: 2 -bus info: pci@:00:02.0 -version: 02 -width: 32 bits -clock: 33MHz -capabilities: msi pm vga_controller bus_master cap_list -configuration: latency=0 -resources: memory:e200-e207 ioport:c000(size=8) memory:d000-dfff memory:e208-e20b memory:c-d + *-display UNCLAIMED + description: VGA compatible controller + product: 82945G/GZ Integrated Graphics Controller + vendor: Intel Corporation + physical id: 2 + bus info: pci@:00:02.0 + version: 02 + width: 32 bits + clock: 33MHz + capabilities: msi pm vga_controller bus_master cap_list + configuration: latency=0 + resources: memory:e200-e207 ioport:c000(size=8) memory:d000-dfff memory:e208-e20b memory:c-d - I've tried solution 1 and solution 2 but no success. This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case. Intel Graphics Update Tool shows: Checking if Intel graphics card available... - • checking for i915 module in /sys/module - • i915 module found + • checking for i915 module in /sys/module + • i915 module found Checking if Intel graphics card available... OK Retrieving information from 01.org... - • fetching https://download.01.org/gfx/ilg-config.cfg - • saving to /home/garden/.ilg-config - • fetched 1626 bytes - • fetched 9818 bytes - • fetched 12301 bytes - • looking up [Ubuntu bionic] configuration + • fetching https://download.01.org/gfx/ilg-config.cfg + • saving to /home/test/.ilg-config + • fetched 1626 bytes + • fetched 9818 bytes + • fetched 12301 bytes + • looking up [Ubuntu bionic] configuration Retrieving information from 01.org... OK Checking distribution... Failed + https://askubuntu.com/questions/1030483/resolution-issue-driver-i915-with-nomodeset + https://chat.stackexchange.com/rooms/76832/discussion-between-sudodus-and-d-a-i-s-y + ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue May 1 17:16:20 2018 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: I just need to know a workaround GraphicsCard: - Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) -Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] + Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) + Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] InstallationDate: Installed on 2018-05-01 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Hewlett-Packard HP dx2080 MT(KS826PA) ProcEnviron: - TERM=xterm-256color - PATH=(custom, no user) - XDG_RUNTIME_DIR= - LANG=en_IN - SHELL=/bin/bash + TERM=xterm-256color + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_IN + SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=7ec4f610-9b62-44f3-867d-01abd93de14d ro quiet splash nomodeset vt.handoff=1 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: - Section "Device" - Identifier "Intel Graphics" - Driver "intel" - Option "AccelMethod" "uxa" - EndSection + Section "Device" + I
[Touch-packages] [Bug 1768232] Re: i915 driver issue in Ubuntu 18.04
it seems that the i915 module is missing from the Paquet linux- modules-4.15.0-20-generic package. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1768232 Title: i915 driver issue in Ubuntu 18.04 Status in xorg package in Ubuntu: Confirmed Bug description: lspci -nnk | grep -iA2 vga 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] Kernel modules: i915, intelfb and xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm 1024x768 76.00* Output of sudo lshw -c display *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:e200-e207 ioport:c000(size=8) memory:d000-dfff memory:e208-e20b memory:c-d I've tried solution 1 and solution 2 but no success. This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case. Intel Graphics Update Tool shows: Checking if Intel graphics card available... • checking for i915 module in /sys/module • i915 module found Checking if Intel graphics card available... OK Retrieving information from 01.org... • fetching https://download.01.org/gfx/ilg-config.cfg • saving to /home/garden/.ilg-config • fetched 1626 bytes • fetched 9818 bytes • fetched 12301 bytes • looking up [Ubuntu bionic] configuration Retrieving information from 01.org... OK Checking distribution... Failed ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue May 1 17:16:20 2018 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: I just need to know a workaround GraphicsCard: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] InstallationDate: Installed on 2018-05-01 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Hewlett-Packard HP dx2080 MT(KS826PA) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=7ec4f610-9b62-44f3-867d-01abd93de14d ro quiet splash nomodeset vt.handoff=1 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "uxa" EndSection dmi.bios.date: 11/28/2007 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: V1.03 dmi.board.name: 0AD8h dmi.board.vendor: Board Manufacturer dmi.chassis.asset.tag: INA8100LFY dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrV1.03:bd11/28/2007:svnHewlett-Packard:pnHPdx2080MT(KS826PA):pvr:rvnBoardManufacturer:rn0AD8h:rvr:cvnHewlett-Packard:ct3:cvr: dmi.product.name: HP dx2080 MT(KS826PA) dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91+git1804271336.50426f~oibaf~b version.libgl1-mesa-dri: libgl1-mesa-dri 18.2~git1804301930.1c5f4f~oibaf~b version.libgl1-mesa-glx: libgl1-mesa-glx 18.2~git1804301930.1c5f4f~oibaf~b version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1768232/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch
[Touch-packages] [Bug 1768232] Re: i915 driver issue in Ubuntu 18.04
I had to use a 4.16 kernel from http://kernel.ubuntu.com/~kernel- ppa/mainline to have a working machine! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1768232 Title: i915 driver issue in Ubuntu 18.04 Status in xorg package in Ubuntu: Confirmed Bug description: lspci -nnk | grep -iA2 vga 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] Kernel modules: i915, intelfb and xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm 1024x768 76.00* Output of sudo lshw -c display *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:e200-e207 ioport:c000(size=8) memory:d000-dfff memory:e208-e20b memory:c-d I've tried solution 1 and solution 2 but no success. This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case. Intel Graphics Update Tool shows: Checking if Intel graphics card available... • checking for i915 module in /sys/module • i915 module found Checking if Intel graphics card available... OK Retrieving information from 01.org... • fetching https://download.01.org/gfx/ilg-config.cfg • saving to /home/garden/.ilg-config • fetched 1626 bytes • fetched 9818 bytes • fetched 12301 bytes • looking up [Ubuntu bionic] configuration Retrieving information from 01.org... OK Checking distribution... Failed ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue May 1 17:16:20 2018 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: I just need to know a workaround GraphicsCard: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] InstallationDate: Installed on 2018-05-01 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Hewlett-Packard HP dx2080 MT(KS826PA) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=7ec4f610-9b62-44f3-867d-01abd93de14d ro quiet splash nomodeset vt.handoff=1 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "uxa" EndSection dmi.bios.date: 11/28/2007 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: V1.03 dmi.board.name: 0AD8h dmi.board.vendor: Board Manufacturer dmi.chassis.asset.tag: INA8100LFY dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrV1.03:bd11/28/2007:svnHewlett-Packard:pnHPdx2080MT(KS826PA):pvr:rvnBoardManufacturer:rn0AD8h:rvr:cvnHewlett-Packard:ct3:cvr: dmi.product.name: HP dx2080 MT(KS826PA) dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91+git1804271336.50426f~oibaf~b version.libgl1-mesa-dri: libgl1-mesa-dri 18.2~git1804301930.1c5f4f~oibaf~b version.libgl1-mesa-glx: libgl1-mesa-glx 18.2~git1804301930.1c5f4f~oibaf~b version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1768232/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to
[Touch-packages] [Bug 1768232] Re: i915 driver issue in Ubuntu 18.04
Same thing here with a Dell Latitude E6540 (i5-4210M CPU) `lspci -v` returns : 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller]) Subsystem: Dell 4th Gen Core Processor Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f580 (64-bit, non-prefetchable) [size=4M] Memory at e000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c [disabled] [size=128K] Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features and sudo lshw -c display ~ *-display UNCLAIMED description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:f580-f5bf memory:e000-efff ioport:f000(size=64) memory:c-d The xorg intel package is installed: Package: xserver-xorg-video-intel Version: 2:2.99.917+git20171229-1 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1768232 Title: i915 driver issue in Ubuntu 18.04 Status in xorg package in Ubuntu: Confirmed Bug description: lspci -nnk | grep -iA2 vga 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] Kernel modules: i915, intelfb and xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm 1024x768 76.00* Output of sudo lshw -c display *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:e200-e207 ioport:c000(size=8) memory:d000-dfff memory:e208-e20b memory:c-d I've tried solution 1 and solution 2 but no success. This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case. Intel Graphics Update Tool shows: Checking if Intel graphics card available... • checking for i915 module in /sys/module • i915 module found Checking if Intel graphics card available... OK Retrieving information from 01.org... • fetching https://download.01.org/gfx/ilg-config.cfg • saving to /home/garden/.ilg-config • fetched 1626 bytes • fetched 9818 bytes • fetched 12301 bytes • looking up [Ubuntu bionic] configuration Retrieving information from 01.org... OK Checking distribution... Failed ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue May 1 17:16:20 2018 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: I just need to know a workaround GraphicsCard: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] InstallationDate: Installed on 2018-05-01 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Hewlett-Packard HP dx2080 MT(KS826PA) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=7ec4f610-9b62-44f3-867d-01abd93de14d ro quiet splash nomodeset vt.handoff=1 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "uxa" EndSection dmi.bios.date: 11/28/2007 dmi.bios.ve
[Touch-packages] [Bug 1768232] Re: i915 driver issue in Ubuntu 18.04
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xorg (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1768232 Title: i915 driver issue in Ubuntu 18.04 Status in xorg package in Ubuntu: Confirmed Bug description: lspci -nnk | grep -iA2 vga 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] Kernel modules: i915, intelfb and xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm 1024x768 76.00* Output of sudo lshw -c display *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:e200-e207 ioport:c000(size=8) memory:d000-dfff memory:e208-e20b memory:c-d I've tried solution 1 and solution 2 but no success. This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case. Intel Graphics Update Tool shows: Checking if Intel graphics card available... • checking for i915 module in /sys/module • i915 module found Checking if Intel graphics card available... OK Retrieving information from 01.org... • fetching https://download.01.org/gfx/ilg-config.cfg • saving to /home/garden/.ilg-config • fetched 1626 bytes • fetched 9818 bytes • fetched 12301 bytes • looking up [Ubuntu bionic] configuration Retrieving information from 01.org... OK Checking distribution... Failed ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue May 1 17:16:20 2018 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: I just need to know a workaround GraphicsCard: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a] InstallationDate: Installed on 2018-05-01 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) MachineType: Hewlett-Packard HP dx2080 MT(KS826PA) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=7ec4f610-9b62-44f3-867d-01abd93de14d ro quiet splash nomodeset vt.handoff=1 Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) XorgConf: Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "uxa" EndSection dmi.bios.date: 11/28/2007 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: V1.03 dmi.board.name: 0AD8h dmi.board.vendor: Board Manufacturer dmi.chassis.asset.tag: INA8100LFY dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrV1.03:bd11/28/2007:svnHewlett-Packard:pnHPdx2080MT(KS826PA):pvr:rvnBoardManufacturer:rn0AD8h:rvr:cvnHewlett-Packard:ct3:cvr: dmi.product.name: HP dx2080 MT(KS826PA) dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91+git1804271336.50426f~oibaf~b version.libgl1-mesa-dri: libgl1-mesa-dri 18.2~git1804301930.1c5f4f~oibaf~b version.libgl1-mesa-glx: libgl1-mesa-glx 18.2~git1804301930.1c5f4f~oibaf~b version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1768232/+subscriptions -- Mailing list: https://launchpad.net/~t
