Hello,
Continuing with this subject. I didn't mention the registers values
posted last email was already changed for ISSI RAM. Having said that, I have
3 different *write errors msgs and contexts*. Althought they look the same,
they are:
- *Memory (date line) error at , wrote , read
89abcdef89abcdef ! **...*
- Memory error at 018c, wrote , read ff77 !
- Memory (address line) error at 07f8-07fc, XOR value 0004
!
Is there differences between these errors? where can I find
information about it?
Regards,
Mauro César
2010/11/24 Mauro Marinho listasman...@gmail.com
Hi there,
It's my first contact to the group. I just started working with U-boot
from my Job here in Brazil. Does anyone has already worked with any of the
RAM's below? both 2 Meg x 16 x 4 banks:
- Micron - MT48LC8M16A2;
- ISSI - IS42S16800E -75ETL;
I got the mission to make the necessary software changes to make a
MPC5200B board to work with our new RAM from ISSI provider, model
IS42S16800E which is a 128Mb (16MB), 133Mhz, CAS = 2. So it means the board
was already working fine with the OLD micron RAM. Offcourse I tried to load
the same u-boot version to experiment. It failed with the same error
below(bolded). I have the *MPC5200B SDRAM Initialization and
Configuration* document I used as reference.
There are 2 CI's on CS0 and CS1 is disabled. So we have 32MB(2x16MB)
available onBoard. I noticed from the study on each datasheet that Micron
was configured with CAS Latency = 3 the only clear difference from
ISSI(CAS=2), and some small timing differences I used on calculations. Then
i've changed the *control, mode, config1 and config2* REGISTERS to
corroborate ISSI's datasheet.
After that, I compiled and loaded U-boot on the Board. Then, I got a
WRITE error on screen BELOW :
*U-Boot 1.1.6.Autotrac-R2a-g6b4fc061-dirty (Nov 23 2010 - 10:53:30)*
*
*
*CPU: MPC5200 v1.2, Core v1.1 at 396 MHz*
* Bus 132 MHz, IPB 66 MHz, PCI 33 MHz*
*Board: Autotrac UCC*
*DRAM: 32 MB*
*Memory (date line) error at , wrote , read
89abcdef89abcdef !*
*Memory (date line) error at , wrote , read
89abcdef89abcdef !*
*...*
What could it be? where should I pay more attention? doesn't it look like a
timing problem?
The header portion extracted;
/*
* SDRAM configuration
*/
/* 2x IS42S16800E - 7.5 ns SDRAMS = 32 MegaBytes Total */
*#define CFG_DRAM_DDR 0* /* 0 = SDR mode; 1 = DDR
mode*/
#*define CFG_DRAM_EMODE 0 * /* DDR usage*/
*#define CFG_DRAM_MODE 0x008D* //* pg.250 0.1100.11[01] (CAS=2
burst=8) */
*#define CFG_DRAM_CONTROL 0x504F* /* pg.251 refresh=0xF half the
max(64ms) */
*#define CFG_DRAM_CONFIG1 0xCA00* // 15/7.5oldValue=0xD2333A00
/* pg.254 */
*#define CFG_DRAM_CONFIG2 0x8AC7* //* 0x8AD7 pg.255 */
*#define CFG_DRAM_TAP_DEL 0x01* /* pg.146 */
*#define CFG_DRAM_RAM_SIZE 0x18 * /* Bitset 11000 - 32M pg.126
*/
If there's any missing info, please let me know.
My Best Regards,
--
Mauro César
--
--
Mauro César
email/MSN/Gtalk:man...@gmail.com gtalk%3aman...@gmail.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
