[PATCH] kontron-sl-mx8mm: Let CONFIG_SPL_FIT_IMAGE_TINY be selected
> When CONFIG_IMX_HAB is selected the 'hab_status' command reports several > error events, indicating that the BootROM failed to authenticate the SPL. > After inspecting the content of the memory location that corresponds to > the DTB load address, the content did not match with the DTB binary, > showing that some kind of memory corruption/overlap occurred. > Letting the CONFIG_SPL_FIT_IMAGE_TINY option to be selected causes the > DTB to be properly placed into RAM and no more overlap occurs. > With this change, the 'hab_status' command returns no more error events, > which indicates that the BootROM succeeded to authenticate the SPL. > Signed-off-by: Fabio Estevam > Reviewed-by: Frieder Schrempf Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- = DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =
Re: [PATCH] kontron-sl-mx8mm: Let CONFIG_SPL_FIT_IMAGE_TINY be selected
Hi Stefano and Tom, On Wed, Aug 24, 2022 at 7:09 AM Frieder Schrempf wrote: > > Hi Fabio, > > Am 24.08.22 um 03:09 schrieb Fabio Estevam: > > When CONFIG_IMX_HAB is selected the 'hab_status' command reports several > > error events, indicating that the BootROM failed to authenticate the SPL. > > > > After inspecting the content of the memory location that corresponds to > > the DTB load address, the content did not match with the DTB binary, > > showing that some kind of memory corruption/overlap occurred. > > > > Letting the CONFIG_SPL_FIT_IMAGE_TINY option to be selected causes the > > DTB to be properly placed into RAM and no more overlap occurs. > > > > With this change, the 'hab_status' command returns no more error events, > > which indicates that the BootROM succeeded to authenticate the SPL. > > > > Signed-off-by: Fabio Estevam > > Thanks for debugging! > > I remember that enabling CONFIG_SPL_FIT_IMAGE_TINY resulted in aliases > from the devicetree not being available anymore. This in turn caused the > indexing of some devices to not be consistent between SPL, U-Boot proper > and kernel. But I don't remember which exact problems were caused by this. > > I tried this on top of my patchset [1] and at first glance I don't see > any obvious problems, so I hope whatever I have in the back of my mind > is not an issue anymore. > > Reviewed-by: Frieder Schrempf Could you please consider applying this one as a fix to 2022.10? Thanks
Re: [PATCH] kontron-sl-mx8mm: Let CONFIG_SPL_FIT_IMAGE_TINY be selected
Hi Fabio, Am 24.08.22 um 03:09 schrieb Fabio Estevam: > When CONFIG_IMX_HAB is selected the 'hab_status' command reports several > error events, indicating that the BootROM failed to authenticate the SPL. > > After inspecting the content of the memory location that corresponds to > the DTB load address, the content did not match with the DTB binary, > showing that some kind of memory corruption/overlap occurred. > > Letting the CONFIG_SPL_FIT_IMAGE_TINY option to be selected causes the > DTB to be properly placed into RAM and no more overlap occurs. > > With this change, the 'hab_status' command returns no more error events, > which indicates that the BootROM succeeded to authenticate the SPL. > > Signed-off-by: Fabio Estevam Thanks for debugging! I remember that enabling CONFIG_SPL_FIT_IMAGE_TINY resulted in aliases from the devicetree not being available anymore. This in turn caused the indexing of some devices to not be consistent between SPL, U-Boot proper and kernel. But I don't remember which exact problems were caused by this. I tried this on top of my patchset [1] and at first glance I don't see any obvious problems, so I hope whatever I have in the back of my mind is not an issue anymore. Reviewed-by: Frieder Schrempf [1] https://patchwork.ozlabs.org/project/uboot/cover/20220801103027.96820-1-frie...@fris.de/ Thanks Frieder
[PATCH] kontron-sl-mx8mm: Let CONFIG_SPL_FIT_IMAGE_TINY be selected
When CONFIG_IMX_HAB is selected the 'hab_status' command reports several error events, indicating that the BootROM failed to authenticate the SPL. After inspecting the content of the memory location that corresponds to the DTB load address, the content did not match with the DTB binary, showing that some kind of memory corruption/overlap occurred. Letting the CONFIG_SPL_FIT_IMAGE_TINY option to be selected causes the DTB to be properly placed into RAM and no more overlap occurs. With this change, the 'hab_status' command returns no more error events, which indicates that the BootROM succeeded to authenticate the SPL. Signed-off-by: Fabio Estevam --- configs/kontron-sl-mx8mm_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index 5387f65926f6..f8589b010cce 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -39,7 +39,6 @@ CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x4220 CONFIG_SYS_SPL_MALLOC_SIZE=0x8 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 -# CONFIG_SPL_FIT_IMAGE_TINY is not set CONFIG_SPL_I2C=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y -- 2.25.1