From: Tom Warren <twar...@nvidia.com>

These patches change some PLL power sequencing, remove pinmuxing
and GPIO init on T210, and adjust some load addresses to allow
for larger kernels.

JC Kuo (1):
  t210: do not enable PLLE and UPHY PLL HW PWRSEQ

Tom Warren (2):
  t210: Adjust ramdisk_addr_r/fdt_addr_r to allow for large kernels
  t210: pinmux: Remove pinmux/GPIO init from T210 boards

 arch/arm/cpu/armv8/cpu.c                           |   5 +
 arch/arm/include/asm/arch-tegra/xusb-padctl.h      |   1 +
 arch/arm/mach-tegra/board2.c                       |   6 +
 arch/arm/mach-tegra/tegra210/Makefile              |   3 +-
 arch/arm/mach-tegra/tegra210/clock.c               |  19 --
 arch/arm/mach-tegra/tegra210/pinmux.c              | 194 --------------
 arch/arm/mach-tegra/tegra210/xusb-padctl.c         |  68 +++--
 arch/arm/mach-tegra/xusb-padctl-dummy.c            |   4 +
 board/nvidia/e2220-1170/e2220-1170.c               |  21 +-
 board/nvidia/e2220-1170/pinmux-config-e2220-1170.h | 276 --------------------
 board/nvidia/p2371-0000/p2371-0000.c               |  21 +-
 board/nvidia/p2371-0000/pinmux-config-p2371-0000.h | 267 --------------------
 board/nvidia/p2371-2180/p2371-2180.c               |  21 +-
 board/nvidia/p2371-2180/pinmux-config-p2371-2180.h | 278 ---------------------
 board/nvidia/p2571/p2571.c                         |  21 +-
 board/nvidia/p2571/pinmux-config-p2571.h           | 242 ------------------
 include/configs/tegra210-common.h                  |   4 +-
 17 files changed, 66 insertions(+), 1385 deletions(-)
 delete mode 100644 arch/arm/mach-tegra/tegra210/pinmux.c
 delete mode 100644 board/nvidia/e2220-1170/pinmux-config-e2220-1170.h
 delete mode 100644 board/nvidia/p2371-0000/pinmux-config-p2371-0000.h
 delete mode 100644 board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
 delete mode 100644 board/nvidia/p2571/pinmux-config-p2571.h

-- 
1.8.2.1.610.g562af5b


-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may 
contain
confidential information.  Any unauthorized review, use, disclosure or 
distribution
is prohibited.  If you are not the intended recipient, please contact the 
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

Reply via email to