Re: [PATCH 2/2] board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB
On 2024/1/20 19:36, Andy Yan wrote:
Cool Pi CM5 EVB works as a mother board connect with CM5.
CM5 Specification:
- Rockchip RK3588
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- SPI Nor 8MB
- Gigabit ethernet x 1 with PHY YT8531
- Gigabit ethernet x 1 drived by PCIE with YT6801S
CM5 EVB Specification:
- HDMI Type A out x 2
- HDMI Type D in x 1
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- PCIE M.2 E Key for Wireless connection
- PCIE M.2 M Key for NVME connection
- 40 pin header
The dts is from linux-6.8 rc1.
Signed-off-by: Andy Yan
Reviewed-by: Kever Yang
Thanks,
- Kever
---
.../arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi | 30 +
arch/arm/dts/rk3588-coolpi-cm5-evb.dts| 214 ++
arch/arm/dts/rk3588-coolpi-cm5.dtsi | 650 ++
board/rockchip/evb_rk3588/MAINTAINERS | 8 +
configs/coolpi-cm5-evb-rk3588_defconfig | 105 +++
5 files changed, 1007 insertions(+)
create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-evb.dts
create mode 100644 arch/arm/dts/rk3588-coolpi-cm5.dtsi
create mode 100644 configs/coolpi-cm5-evb-rk3588_defconfig
diff --git a/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
b/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
new file mode 100644
index 000..6b69ff424fa
--- /dev/null
+++ b/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3588s-u-boot.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
+ };
+};
+
+&fspim2_pins {
+ bootph-all;
+};
+
+&sfc {
+ bootph-pre-ram;
+ u-boot,spl-sfc-no-dma;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ status = "okay";
+
+ flash@0 {
+ bootph-pre-ram;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <2400>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
diff --git a/arch/arm/dts/rk3588-coolpi-cm5-evb.dts
b/arch/arm/dts/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000..d4c70835e0f
--- /dev/null
+++ b/arch/arm/dts/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+ model = "RK3588 CoolPi CM5 EVB";
+ compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ power-supply = <&vcc12v_dcin>;
+ pwms = <&pwm2 0 25000 0>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ green_led: led-0 {
+ color = ;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200>;
+ regulator-max-microvolt = <1200>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500>;
+ regulator-max-microvolt = <500>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <330>;
+ regulator-max-microvolt = <330>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_lcd: vcc3v3-lcd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdpwr_en>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-alw
[PATCH 2/2] board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB
Cool Pi CM5 EVB works as a mother board connect with CM5.
CM5 Specification:
- Rockchip RK3588
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- SPI Nor 8MB
- Gigabit ethernet x 1 with PHY YT8531
- Gigabit ethernet x 1 drived by PCIE with YT6801S
CM5 EVB Specification:
- HDMI Type A out x 2
- HDMI Type D in x 1
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- PCIE M.2 E Key for Wireless connection
- PCIE M.2 M Key for NVME connection
- 40 pin header
The dts is from linux-6.8 rc1.
Signed-off-by: Andy Yan
---
.../arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi | 30 +
arch/arm/dts/rk3588-coolpi-cm5-evb.dts| 214 ++
arch/arm/dts/rk3588-coolpi-cm5.dtsi | 650 ++
board/rockchip/evb_rk3588/MAINTAINERS | 8 +
configs/coolpi-cm5-evb-rk3588_defconfig | 105 +++
5 files changed, 1007 insertions(+)
create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-evb.dts
create mode 100644 arch/arm/dts/rk3588-coolpi-cm5.dtsi
create mode 100644 configs/coolpi-cm5-evb-rk3588_defconfig
diff --git a/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
b/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
new file mode 100644
index 000..6b69ff424fa
--- /dev/null
+++ b/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3588s-u-boot.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
+ };
+};
+
+&fspim2_pins {
+ bootph-all;
+};
+
+&sfc {
+ bootph-pre-ram;
+ u-boot,spl-sfc-no-dma;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ status = "okay";
+
+ flash@0 {
+ bootph-pre-ram;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <2400>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
diff --git a/arch/arm/dts/rk3588-coolpi-cm5-evb.dts
b/arch/arm/dts/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000..d4c70835e0f
--- /dev/null
+++ b/arch/arm/dts/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+ model = "RK3588 CoolPi CM5 EVB";
+ compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ power-supply = <&vcc12v_dcin>;
+ pwms = <&pwm2 0 25000 0>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ green_led: led-0 {
+ color = ;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200>;
+ regulator-max-microvolt = <1200>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500>;
+ regulator-max-microvolt = <500>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <330>;
+ regulator-max-microvolt = <330>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_lcd: vcc3v3-lcd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdpwr_en>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ regulator-min-microvolt = <500
