Reviewed-by: Kever Yang
Thanks,
- Kever
Johan Jonker 于2021年8月21日周六 上午1:33写道：
>
> Brand names are supposed to be written with a capital,
> so change them all.
>
> Signed-off-by: Johan Jonker
> ---
> doc/board/rockchip/rockchip.rst | 16
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
> index 8d75efc0..144cb98e 100644
> --- a/doc/board/rockchip/rockchip.rst
> +++ b/doc/board/rockchip/rockchip.rst
> @@ -16,10 +16,10 @@ Rockchip boards
> Rockchip is SoC solutions provider for tablets & PCs, streaming media
> TV boxes, AI audio & vision, IoT hardware.
>
> -A wide range of Rockchip SoCs with associated boardsare supported in
> +A wide range of Rockchip SoCs with associated boards are supported in
> mainline U-Boot.
>
> -List of mainline supported rockchip boards:
> +List of mainline supported Rockchip boards:
>
> * rk3036
> - Rockchip Evb-RK3036 (evb-rk3036)
> @@ -93,7 +93,7 @@ To build TF-A::
> make realclean
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
>
> -Specify the PLAT= with desired rockchip platform to build TF-A for.
> +Specify the PLAT= with desired Rockchip platform to build TF-A for.
>
> U-Boot
> ^^
> @@ -130,7 +130,7 @@ Flashing
> SD Card
> ^^^
>
> -All rockchip platforms, except rk3128 (which doesn't use SPL) are now
> +All Rockchip platforms, except rk3128 (which doesn't use SPL) are now
> supporting single boot image using binman and pad_cat.
>
> To write an image that boots from an SD card (assumed to be /dev/sda)::
> @@ -141,7 +141,7 @@ To write an image that boots from an SD card (assumed to
> be /dev/sda)::
> eMMC
>
>
> -eMMC flash would probe on mmc0 in most of the rockchip platforms.
> +eMMC flash would probe on mmc0 in most of the Rockchip platforms.
>
> Create GPT partition layout as defined in configurations::
>
> @@ -164,7 +164,7 @@ Program the flash::
> sudo fastboot -i 0x2207 flash loader1 idbloader.img
> sudo fastboot -i 0x2207 flash loader2 u-boot.itb
>
> -Note: for rockchip 32-bit platforms the U-Boot proper image
> +Note: for Rockchip 32-bit platforms the U-Boot proper image
> is u-boot-dtb.img
>
> SPI
> @@ -227,8 +227,8 @@ Note:
> TODO
>
>
> -- Add rockchip idbloader image building
> -- Add rockchip TPL image building
> +- Add Rockchip idbloader image building
> +- Add Rockchip TPL image building
> - Document SPI flash boot
> - Add missing SoC's with it boards list
>
> --
> 2.20.1
>
