On Espressobin board value for $fdtfile cannot be determined at compile time and is calculated at board runtime code. This change uses a new option DEFAULT_ENV_IS_RW to allow modifying default_environment[] array at runtime and set into it correct value.
This change also ensure that 'env default -a' set correct value to $fdtfile. Signed-off-by: Pali Rohár <p...@kernel.org> --- board/Marvell/mvebu_armada-37xx/board.c | 22 +++++++++++++++------- include/configs/mvebu_armada-37xx.h | 13 ++++++++++++- 2 files changed, 27 insertions(+), 8 deletions(-) diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c index f67b04b78c..9297ea0f90 100644 --- a/board/Marvell/mvebu_armada-37xx/board.c +++ b/board/Marvell/mvebu_armada-37xx/board.c @@ -6,6 +6,7 @@ #include <common.h> #include <dm.h> #include <env.h> +#include <env_internal.h> #include <i2c.h> #include <init.h> #include <mmc.h> @@ -84,15 +85,17 @@ int board_init(void) #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { + char *ptr = (char *)&default_environment[0]; struct mmc *mmc_dev; bool ddr4, emmc; - if (env_get("fdtfile")) - return 0; - if (!of_machine_is_compatible("globalscale,espressobin")) return 0; + /* Find free buffer in default_environment[] for new variables */ + while (*ptr != '\0' && *(ptr+1) != '\0') ptr++; + ptr += 2; + /* If the memory controller has been configured for DDR4, we're running on v7 */ ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS) & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4; @@ -101,14 +104,19 @@ int board_late_init(void) mmc_dev = find_mmc_device(1); emmc = (mmc_dev && mmc_init(mmc_dev) == 0); + /* Ensure that 'env default -a' set correct value to $fdtfile */ if (ddr4 && emmc) - env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb"); + strcpy(ptr, "fdtfile=marvell/armada-3720-espressobin-v7-emmc.dtb"); else if (ddr4) - env_set("fdtfile", "marvell/armada-3720-espressobin-v7.dtb"); + strcpy(ptr, "fdtfile=marvell/armada-3720-espressobin-v7.dtb"); else if (emmc) - env_set("fdtfile", "marvell/armada-3720-espressobin-emmc.dtb"); + strcpy(ptr, "fdtfile=marvell/armada-3720-espressobin-emmc.dtb"); else - env_set("fdtfile", "marvell/armada-3720-espressobin.dtb"); + strcpy(ptr, "fdtfile=marvell/armada-3720-espressobin.dtb"); + + /* If $fdtfile was not set explicitly by user then set default value */ + if (!env_get("fdtfile")) + env_set("fdtfile", ptr + sizeof("fdtfile=")); return 0; } diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index 0d585606a7..6df702367c 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -57,6 +57,11 @@ */ #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ +/* + * Environment + */ +#define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */ + /* * Ethernet Driver configuration */ @@ -87,6 +92,11 @@ #include <config_distro_bootcmd.h> +/* filler for default values filled by board_early_init_f() */ +#define ENV_RW_FILLER \ + "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for fdtfile= */ \ + "" + /* fdt_addr and kernel_addr are needed for existing distribution boot scripts */ #define CONFIG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x6d00000\0" \ @@ -96,6 +106,7 @@ "kernel_addr=0x7000000\0" \ "kernel_addr_r=0x7000000\0" \ "ramdisk_addr_r=0xa000000\0" \ - BOOTENV + BOOTENV \ + ENV_RW_FILLER #endif /* _CONFIG_MVEBU_ARMADA_37XX_H */ -- 2.20.1