At the moment we use "select" in each Allwinner SoC's Kconfig section to
include the USB PHY driver in the build. This means it cannot be disabled
via Kconfig, although USB is not really a strictly required core
functionality, and a particular board might not even include USB ports.
Rework the Kconfig part by removing the "select" lines for each SoC's
section, and instead letting it default to "y" in the PHY driver section
itself. We use "depends on !" to exclude the few SoCs we don't support
(yet). The Allwinner V3s does not enable USB (PHY) support at the moment,
even though it should work: let the PHY default to "n" to keep the
current behaviour.
Signed-off-by: Andre Przywara
---
arch/arm/mach-sunxi/Kconfig | 11 ---
drivers/phy/allwinner/Kconfig | 6 +-
2 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 6dcbb096f74..e0b1bde35a9 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -207,7 +207,6 @@ endif
config MACH_SUNXI_H3_H5
bool
- select PHY_SUN4I_USB
select SUNXI_DE2
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
@@ -236,7 +235,6 @@ config MACH_SUNIV
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7A
- select PHY_SUN4I_USB
select DRAM_SUN4I
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
@@ -247,7 +245,6 @@ config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select CPU_V7A
select DRAM_SUN4I
- select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
imply SPL_SYS_I2C_LEGACY
@@ -261,7 +258,6 @@ config MACH_SUN6I
select ARCH_SUPPORT_PSCI
select SPL_ARMV7_SET_CORTEX_SMPEN
select DRAM_SUN6I
- select PHY_SUN4I_USB
select SPL_I2C
select SUN6I_PRCM
select SUNXI_GEN_SUN6I
@@ -277,7 +273,6 @@ config MACH_SUN7I
select ARCH_SUPPORT_PSCI
select SPL_ARMV7_SET_CORTEX_SMPEN
select DRAM_SUN4I
- select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -291,7 +286,6 @@ config MACH_SUN8I_A23
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN8I_A23
- select PHY_SUN4I_USB
select SPL_I2C
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
@@ -305,7 +299,6 @@ config MACH_SUN8I_A33
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN8I_A33
- select PHY_SUN4I_USB
select SPL_I2C
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
@@ -316,7 +309,6 @@ config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
select CPU_V7A
select DRAM_SUN8I_A83T
- select PHY_SUN4I_USB
select SPL_I2C
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
@@ -344,7 +336,6 @@ config MACH_SUN8I_R40
select SUPPORT_SPL
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
- select PHY_SUN4I_USB
imply SPL_SYS_I2C_LEGACY
config MACH_SUN8I_V3S
@@ -372,7 +363,6 @@ config MACH_SUN9I
config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
- select PHY_SUN4I_USB
select SUN6I_PRCM
select SUNXI_DE2
select SUNXI_GEN_SUN6I
@@ -395,7 +385,6 @@ config MACH_SUN50I_H5
config MACH_SUN50I_H6
bool "sun50i (Allwinner H6)"
select ARM64
- select PHY_SUN4I_USB
select DRAM_SUN50I_H6
select SUN50I_GEN_H6
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index f8f1e99c4f5..565b4617b01 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -4,6 +4,10 @@
config PHY_SUN4I_USB
bool "Allwinner Sun4I USB PHY driver"
depends on ARCH_SUNXI
+ depends on !MACH_SUN9I
+ depends on !MACH_SUN50I_H616
+ default n if MACH_SUN8I_V3S
+ default y
select DM_REGULATOR
select PHY
help
@@ -11,7 +15,7 @@ config PHY_SUN4I_USB
sunxi SoCs.
This driver controls the entire USB PHY block, both the USB OTG
- parts, as well as the 2 regular USB 2 host PHYs.
+ parts, as well as the regular USB HCI host PHYs.
config INITIAL_USB_SCAN_DELAY
int "Delay initial USB scan by x ms to allow builtin devices to init"
--
2.25.1
