[PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro
Update the device matrix and add build instructions. Signed-off-by: Christian Hewitt --- doc/board/amlogic/beelink-gtking.rst| 115 +++ doc/board/amlogic/beelink-gtkingpro.rst | 116 doc/board/amlogic/index.rst | 4 +- 3 files changed, 234 insertions(+), 1 deletion(-) create mode 100644 doc/board/amlogic/beelink-gtking.rst create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst diff --git a/doc/board/amlogic/beelink-gtking.rst b/doc/board/amlogic/beelink-gtking.rst new file mode 100644 index 00..56ce2cb273 --- /dev/null +++ b/doc/board/amlogic/beelink-gtking.rst @@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Beelink GT-King +== + +The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference +board with an S922X-H chip. + +- 4GB LPDDR4 RAM +- 64GB eMMC storage +- 10/100/1000 Base-T Ethernet +- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) +- HDMI 2.1 video +- S/PDIF optical output +- Analogue audio output +- 1x USB 2.0 port +- 2x USB 3.0 ports +- IR receiver +- 1x micro SD card slot + +Beelink do not provide public schematics, but have been willing +to share them with known distro developers on request. + +U-Boot compilation +-- + +.. code-block:: bash + +$ export CROSS_COMPILE=aarch64-none-elf- +$ make beelink-gtking_defconfig +$ make + +Image creation +-- + +Amlogic does not provide sources for the firmware and for tools needed +to create the bootloader image. Beelink have provided the Amlogic "SDK" +in their forums, but the u-boot sources included result in 2GB RAM being +detected. The following FIPs were generated with newer private sources +and give correct (4GB) RAM detection: + +https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x + +NB: Beelink use a common board config for GT-King, GT-King Pro and the +GS-King-X model, hence the "beelink-s922x" name. + +.. code-block:: bash + +$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip +$ unzip master.zip +$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x + +Go back to the mainline U-Boot source tree then: + +.. code-block:: bash + +$ mkdir fip +$ cp $FIPDIR/* fip/ +$ cp u-boot.bin fip/bl33.bin + +$ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + +$ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + +$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 +$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 +$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 +$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 +$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig +$ fip/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + +$ DEV=/dev/your_sd_device +$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 +$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst new file mode 100644 index 00..d750351361 --- /dev/null +++ b/doc/board/amlogic/beelink-gtkingpro.rst @@ -0,0 +1,116 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Beelink GT-King Pro +== + +The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference +board with an S922X-H chip. + +- 4GB LPDDR4 RAM +- 64GB eMMC storage +- 10/100/1000 Base-T Ethernet +- AP6356S Wireless (802.11 a/b/g/n/ac, BT
Re: [PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro
On 18/12/2020 09:45, Christian Hewitt wrote: > Update the device matrix and add build instructions. > > Signed-off-by: Christian Hewitt > --- > doc/board/amlogic/beelink-gtking.rst| 115 +++ > doc/board/amlogic/beelink-gtkingpro.rst | 116 > doc/board/amlogic/index.rst | 4 +- > 3 files changed, 234 insertions(+), 1 deletion(-) > create mode 100644 doc/board/amlogic/beelink-gtking.rst > create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst > > diff --git a/doc/board/amlogic/beelink-gtking.rst > b/doc/board/amlogic/beelink-gtking.rst > new file mode 100644 > index 00..56ce2cb273 > --- /dev/null > +++ b/doc/board/amlogic/beelink-gtking.rst > @@ -0,0 +1,115 @@ > +.. SPDX-License-Identifier: GPL-2.0+ > + > +U-Boot for Beelink GT-King > +== > + > +The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference > +board with an S922X-H chip. > + > +- 4GB LPDDR4 RAM > +- 64GB eMMC storage > +- 10/100/1000 Base-T Ethernet > +- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) > +- HDMI 2.1 video > +- S/PDIF optical output > +- Analogue audio output > +- 1x USB 2.0 port > +- 2x USB 3.0 ports > +- IR receiver > +- 1x micro SD card slot > + > +Beelink do not provide public schematics, but have been willing > +to share them with known distro developers on request. > + > +U-Boot compilation > +-- > + > +.. code-block:: bash > + > +$ export CROSS_COMPILE=aarch64-none-elf- > +$ make beelink-gtking_defconfig > +$ make > + > +Image creation > +-- > + > +Amlogic does not provide sources for the firmware and for tools needed > +to create the bootloader image. Beelink have provided the Amlogic "SDK" > +in their forums, but the u-boot sources included result in 2GB RAM being > +detected. The following FIPs were generated with newer private sources > +and give correct (4GB) RAM detection: > + > +https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x > + > +NB: Beelink use a common board config for GT-King, GT-King Pro and the > +GS-King-X model, hence the "beelink-s922x" name. > + > +.. code-block:: bash > + > +$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip > +$ unzip master.zip > +$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x > + > +Go back to the mainline U-Boot source tree then: > + > +.. code-block:: bash > + > +$ mkdir fip > +$ cp $FIPDIR/* fip/ > +$ cp u-boot.bin fip/bl33.bin > + > +$ sh fip/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > +$ sh fip/blx_fix.sh \ > + fip/bl2.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/acs.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > +$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ > + --output fip/bl30_new.bin.g12a.enc \ > + --level v3 > +$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ > + --output fip/bl30_new.bin.enc \ > + --level v3 --type bl30 > +$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ > + --output fip/bl31.img.enc \ > + --level v3 --type bl31 > +$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ > + --output fip/bl33.bin.enc \ > + --level v3 --type bl33 > +$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ > + --output fip/bl2.n.bin.sig > +$ fip/aml_encrypt_g12b --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc \ > + --ddrfw1 fip/ddr4_1d.fw \ > + --ddrfw2 fip/ddr4_2d.fw \ > + --ddrfw3 fip/ddr3_1d.fw \ > + --ddrfw4 fip/piei.fw \ > + --ddrfw5 fip/lpddr4_1d.fw \ > + --ddrfw6 fip/lpddr4_2d.fw \ > + --ddrfw7 fip/diag_lpddr4.fw \ > + --ddrfw8 fip/aml_ddr.fw \ > + --level v3 > + > +and then write the image to SD with: > + > +.. code-block:: bash > + > +$ DEV=/dev/your_sd_device > +$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 > seek=1 > +$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/doc/board/amlogic/beelink-gtkingpro.rst > b/doc/board/amlogic/beelink-gtkingpro.rst > new file mode 100644 > index 00..d750351361 > --- /dev/null > +++ b/doc/board/amlogic/beelink-gtkingpro.rst > @@ -0,0 +1,116 @@ > +.. SPDX-License-Identifier: GPL-2.0+ > + > +U-Boot for Beelink GT-King P
