From: Francesco Dolcini
Remove not needed variables from environment and include config files.
- setup variable used to be executed from some bootscript, however
it's not required and there is no point on having this small helper
here
- boot_file, kernel_file, ip_dyn variables are not used anywhere
- fdt_fixup variable is just set empty
- defargs, vidargs variables used to be used from some bootscript,
however there is no point on having it here and even old legacy
bootscript can work without them
- removed CONFIG_ENABLE_DDR_TRAINING_DEBUG, this is a leftover from
some copy/paste
On colibri imx6ull/imx7 NAND module, remove consoleblank=0, this is
already the Linux kernel default therefore useless.
Various Linux Kernel command line options removed are not-existing
left-over that applied to some old NXP i.MX downstream branch
Signed-off-by: Francesco Dolcini
---
include/configs/apalis-imx8.h | 2 --
include/configs/apalis_imx6.h | 9 +
include/configs/colibri-imx6ull.h | 10 +++---
include/configs/colibri-imx8x.h | 2 --
include/configs/colibri_imx6.h| 9 +
include/configs/colibri_imx7.h| 11 +++
include/configs/verdin-imx8mm.h | 3 ---
include/configs/verdin-imx8mp.h | 5 -
8 files changed, 8 insertions(+), 43 deletions(-)
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index 845705c86db2..c8ec034fc979 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -46,8 +46,6 @@
"fdt_board=eval\0" \
"initrd_addr=0x8380\0" \
"initrd_high=0x\0" \
- "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
- "consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin resp.
u-boot-dtb.imx (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 8a9f3ef75a7d..0df3917e2009 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -64,12 +64,9 @@
#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
- "defargs=enable_wait_mode=off vmalloc=400M\0" \
"fdt_board=eval\0" \
- "fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
@@ -80,16 +77,12 @@
"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
" ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
- "setup=setenv setupargs fec_mac=${ethaddr} " \
- "consoleblank=0 no_console_suspend=1 console=tty1 " \
- "console=${console},${baudrate}n8\0 " \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"splashpos=m,m\0" \
- "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0"
+ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"
/* Miscellaneous configurable options */
diff --git a/include/configs/colibri-imx6ull.h
b/include/configs/colibri-imx6ull.h
index 561a61ebc03c..7c9d633b68d9 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -48,8 +48,8 @@
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
- "setenv bootargs ${defargs} ${ubiargs} " \
- "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...;
" \
+ "setenv bootargs ${ubiargs} " \
+ "${setupargs} ${tdxargs}; echo Booting from NAND...; " \
"ubi part ubi &&" \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
@@ -86,11 +86,7 @@
UBOOT_UPDATE \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
- "defargs=user_debug=30\0" \
"fdt_board=eval-v3\0" \
- "fdt_fixup=;\0" \
- "ip_dyn=yes\0" \
- "kernel_file=zImage\0" \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -99,7 +95,7 @@
"${board}/flash_blk.img && source ${loadaddr}\0" \
"setup=setenv setupargs " \
"console=tty1 console=${console}" \
- ",${baudrate}n8 ${memargs} ${mtdparts} consoleblank=0\0" \
+
