Re: [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset
Hello Eugen,
Am 07.05.2020 um 10:53 schrieb Eugen Hristev:
Because of this commit :
5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
at probe time, each eeprom is tested for read at offset 0.
The Atmel AT24MAC402 eeprom has different mapping. One i2c slave address is
used for the lower 0x80 bytes and another i2c slave address is used for the
upper 0x80 bytes. Because of this basically the i2c master sees 2 different
slaves. We need the upper bytes because we read the unique MAC address from
this EEPROM area.
However this implies that our slave address will return error on reads
from address 0x0 to 0x80.
To solve this, implemented an offset field inside platform data that is by
default 0 (as it is used now), but can be changed in the compatible table.
The probe function will now read at this offset and use it, instead of blindly
checking offset 0.
This will fix the regression noticed on these EEPROMs since the commit
abovementioned that introduces the probe failed issue.
Signed-off-by: Eugen Hristev
---
Please disregard patch
[PATCH] misc: i2c_eeprom: implement different probe test eeprom offset
as that patch was mistakenly done on an older u-boot version.
This v2 patch applies correctly on u-boot/master
Changes in v2:
- adapt to latest changes in driver. v1 was done on u-boot 2020.01 accidentaly.
drivers/misc/i2c_eeprom.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
Applied to u-boot-i2c master
Thanks!
May we should rethink and look at what linux do, but as it fixes a bug
it is ok for me.
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
Re: [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset
On 28.05.2020 06:59, Heiko Schocher wrote:
> Hello Eugen,
>
> Am 07.05.2020 um 17:08 schrieb eugen.hris...@microchip.com:
>> On 07.05.2020 18:02, Baruch Siach wrote:
>>> Hi Heiko,
>>>
>>> On Thu, May 07 2020, Heiko Schocher wrote:
Am 07.05.2020 um 10:53 schrieb Eugen Hristev:
> Because of this commit :
> 5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional
> at probe()")
> at probe time, each eeprom is tested for read at offset 0.
>
> The Atmel AT24MAC402 eeprom has different mapping. One i2c slave
> address is
> used for the lower 0x80 bytes and another i2c slave address is used
> for the
> upper 0x80 bytes. Because of this basically the i2c master sees 2
> different
> slaves. We need the upper bytes because we read the unique MAC
> address from
> this EEPROM area.
>
> However this implies that our slave address will return error on reads
> from address 0x0 to 0x80.
>
> To solve this, implemented an offset field inside platform data
> that is by
> default 0 (as it is used now), but can be changed in the compatible
> table.
>
> The probe function will now read at this offset and use it, instead
> of blindly
> checking offset 0.
>
> This will fix the regression noticed on these EEPROMs since the commit
> abovementioned that introduces the probe failed issue.
>
> Signed-off-by: Eugen Hristev
> ---
>
> Please disregard patch
> [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset
>
> as that patch was mistakenly done on an older u-boot version.
> This v2 patch applies correctly on u-boot/master
>
> Changes in v2:
> - adapt to latest changes in driver. v1 was done on u-boot 2020.01
> accidentaly.
>
> drivers/misc/i2c_eeprom.c | 8 +++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
Thanks for rebasing!
I prefer to fix the issue instead reverting commit:
5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at
probe()")
Reviewed-by: Heiko Schocher
@Baruch, is this Ok for you?
>>>
>>> According to the Linux driver there are more devices that need read
>>> offset. 24cs32 and 24cs64 are affected. This patch does not fix the
>>> regression for those devices.
>>>
>>> Eugen, would it be possible for you to extend the fix to 24cs32/64 and
>>> test on real hardware?
>>
>> Hi Baruch,
>>
>> This patch fixes my issue at hand and the eeprom which I have at my
>> disposal. I will look to see if I have those, but, most likely not.
>> I can extend the fix, but I cannot test, so, I rather not go blind
>> with it.
>
> Any news here?
Hello Heiko,
I do not have any other memory in the compatible list at my disposal
right now. I assumed that you would take this patch as-is. If I hit the
issue on another memory, I will send another patch.
Right now with the lockdown this is the only memory I have.
Eugen
>
> Thanks!
>
> bye,
> HEiko
>>
>> Eugen
>>>
>>> baruch
>>>
> diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
> index ef5f103c98..32a1b20856 100644
> --- a/drivers/misc/i2c_eeprom.c
> +++ b/drivers/misc/i2c_eeprom.c
> @@ -17,6 +17,7 @@ struct i2c_eeprom_drv_data {
> u32 pagesize; /* page size in bytes */
> u32 addr_offset_mask; /* bits in addr used for offset
> overflow */
> u32 offset_len; /* size in bytes of offset */
> + u32 start_offset; /* valid start offset inside memory, by
> default 0 */
> };
> int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t
> *buf, int
> size)
> @@ -147,7 +148,11 @@ static int i2c_eeprom_std_probe(struct udevice
> *dev)
> i2c_set_chip_addr_offset_mask(dev, data->addr_offset_mask);
> /* Verify that the chip is functional */
> - ret = i2c_eeprom_read(dev, 0, &test_byte, 1);
> + /*
> + * Not all eeproms start from offset 0. Valid offset is available
> + * in the platform data struct.
> + */
> + ret = i2c_eeprom_read(dev, data->start_offset, &test_byte, 1);
> if (ret)
> return -ENODEV;
> @@ -215,6 +220,7 @@ static const struct i2c_eeprom_drv_data
> atmel24mac402_data = {
> .pagesize = 16,
> .addr_offset_mask = 0,
> .offset_len = 1,
> + .start_offset = 0x80,
> };
> static const struct i2c_eeprom_drv_data atmel24c32_data = {
>
>>>
>>>
>>> --
>>> ~. .~ Tk
>>> Open Systems
>>> =}ooO--U--Ooo{=
>>>
>>> - bar...@tkos.co.il - tel: +972.52.368.4656,
>>> http://www.tkos.co.il -
>>>
>>
>
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich
Re: [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset
Hello Eugen,
Am 07.05.2020 um 17:08 schrieb eugen.hris...@microchip.com:
On 07.05.2020 18:02, Baruch Siach wrote:
Hi Heiko,
On Thu, May 07 2020, Heiko Schocher wrote:
Am 07.05.2020 um 10:53 schrieb Eugen Hristev:
Because of this commit :
5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
at probe time, each eeprom is tested for read at offset 0.
The Atmel AT24MAC402 eeprom has different mapping. One i2c slave address is
used for the lower 0x80 bytes and another i2c slave address is used for the
upper 0x80 bytes. Because of this basically the i2c master sees 2 different
slaves. We need the upper bytes because we read the unique MAC address from
this EEPROM area.
However this implies that our slave address will return error on reads
from address 0x0 to 0x80.
To solve this, implemented an offset field inside platform data that is by
default 0 (as it is used now), but can be changed in the compatible table.
The probe function will now read at this offset and use it, instead of blindly
checking offset 0.
This will fix the regression noticed on these EEPROMs since the commit
abovementioned that introduces the probe failed issue.
Signed-off-by: Eugen Hristev
---
Please disregard patch
[PATCH] misc: i2c_eeprom: implement different probe test eeprom offset
as that patch was mistakenly done on an older u-boot version.
This v2 patch applies correctly on u-boot/master
Changes in v2:
- adapt to latest changes in driver. v1 was done on u-boot 2020.01 accidentaly.
drivers/misc/i2c_eeprom.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
Thanks for rebasing!
I prefer to fix the issue instead reverting commit:
5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
Reviewed-by: Heiko Schocher
@Baruch, is this Ok for you?
According to the Linux driver there are more devices that need read
offset. 24cs32 and 24cs64 are affected. This patch does not fix the
regression for those devices.
Eugen, would it be possible for you to extend the fix to 24cs32/64 and
test on real hardware?
Hi Baruch,
This patch fixes my issue at hand and the eeprom which I have at my
disposal. I will look to see if I have those, but, most likely not.
I can extend the fix, but I cannot test, so, I rather not go blind with it.
Any news here?
Thanks!
bye,
HEiko
Eugen
baruch
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
index ef5f103c98..32a1b20856 100644
--- a/drivers/misc/i2c_eeprom.c
+++ b/drivers/misc/i2c_eeprom.c
@@ -17,6 +17,7 @@ struct i2c_eeprom_drv_data {
u32 pagesize; /* page size in bytes */
u32 addr_offset_mask; /* bits in addr used for offset overflow */
u32 offset_len; /* size in bytes of offset */
+u32 start_offset; /* valid start offset inside memory, by default 0 */
};
int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int
size)
@@ -147,7 +148,11 @@ static int i2c_eeprom_std_probe(struct udevice *dev)
i2c_set_chip_addr_offset_mask(dev, data->addr_offset_mask);
/* Verify that the chip is functional */
-ret = i2c_eeprom_read(dev, 0, &test_byte, 1);
+/*
+ * Not all eeproms start from offset 0. Valid offset is available
+ * in the platform data struct.
+ */
+ret = i2c_eeprom_read(dev, data->start_offset, &test_byte, 1);
if (ret)
return -ENODEV;
@@ -215,6 +220,7 @@ static const struct i2c_eeprom_drv_data
atmel24mac402_data = {
.pagesize = 16,
.addr_offset_mask = 0,
.offset_len = 1,
+.start_offset = 0x80,
};
static const struct i2c_eeprom_drv_data atmel24c32_data = {
--
~. .~ Tk Open Systems
=}ooO--U--Ooo{=
- bar...@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
Re: [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset
On 07.05.2020 18:02, Baruch Siach wrote:
> Hi Heiko,
>
> On Thu, May 07 2020, Heiko Schocher wrote:
>> Am 07.05.2020 um 10:53 schrieb Eugen Hristev:
>>> Because of this commit :
>>> 5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at
>>> probe()")
>>> at probe time, each eeprom is tested for read at offset 0.
>>>
>>> The Atmel AT24MAC402 eeprom has different mapping. One i2c slave address is
>>> used for the lower 0x80 bytes and another i2c slave address is used for the
>>> upper 0x80 bytes. Because of this basically the i2c master sees 2 different
>>> slaves. We need the upper bytes because we read the unique MAC address from
>>> this EEPROM area.
>>>
>>> However this implies that our slave address will return error on reads
>>> from address 0x0 to 0x80.
>>>
>>> To solve this, implemented an offset field inside platform data that is by
>>> default 0 (as it is used now), but can be changed in the compatible table.
>>>
>>> The probe function will now read at this offset and use it, instead of
>>> blindly
>>> checking offset 0.
>>>
>>> This will fix the regression noticed on these EEPROMs since the commit
>>> abovementioned that introduces the probe failed issue.
>>>
>>> Signed-off-by: Eugen Hristev
>>> ---
>>>
>>> Please disregard patch
>>> [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset
>>>
>>> as that patch was mistakenly done on an older u-boot version.
>>> This v2 patch applies correctly on u-boot/master
>>>
>>> Changes in v2:
>>> - adapt to latest changes in driver. v1 was done on u-boot 2020.01
>>> accidentaly.
>>>
>>>drivers/misc/i2c_eeprom.c | 8 +++-
>>>1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> Thanks for rebasing!
>>
>> I prefer to fix the issue instead reverting commit:
>>
>> 5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at
>> probe()")
>>
>> Reviewed-by: Heiko Schocher
>>
>> @Baruch, is this Ok for you?
>
> According to the Linux driver there are more devices that need read
> offset. 24cs32 and 24cs64 are affected. This patch does not fix the
> regression for those devices.
>
> Eugen, would it be possible for you to extend the fix to 24cs32/64 and
> test on real hardware?
Hi Baruch,
This patch fixes my issue at hand and the eeprom which I have at my
disposal. I will look to see if I have those, but, most likely not.
I can extend the fix, but I cannot test, so, I rather not go blind with it.
Eugen
>
> baruch
>
>>> diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
>>> index ef5f103c98..32a1b20856 100644
>>> --- a/drivers/misc/i2c_eeprom.c
>>> +++ b/drivers/misc/i2c_eeprom.c
>>> @@ -17,6 +17,7 @@ struct i2c_eeprom_drv_data {
>>> u32 pagesize; /* page size in bytes */
>>> u32 addr_offset_mask; /* bits in addr used for offset overflow */
>>> u32 offset_len; /* size in bytes of offset */
>>> +u32 start_offset; /* valid start offset inside memory, by default 0 */
>>>};
>>> int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int
>>> size)
>>> @@ -147,7 +148,11 @@ static int i2c_eeprom_std_probe(struct udevice *dev)
>>> i2c_set_chip_addr_offset_mask(dev, data->addr_offset_mask);
>>> /* Verify that the chip is functional */
>>> -ret = i2c_eeprom_read(dev, 0, &test_byte, 1);
>>> +/*
>>> + * Not all eeproms start from offset 0. Valid offset is available
>>> + * in the platform data struct.
>>> + */
>>> +ret = i2c_eeprom_read(dev, data->start_offset, &test_byte, 1);
>>> if (ret)
>>> return -ENODEV;
>>>@@ -215,6 +220,7 @@ static const struct i2c_eeprom_drv_data
>>> atmel24mac402_data = {
>>> .pagesize = 16,
>>> .addr_offset_mask = 0,
>>> .offset_len = 1,
>>> +.start_offset = 0x80,
>>>};
>>> static const struct i2c_eeprom_drv_data atmel24c32_data = {
>>>
>
>
> --
> ~. .~ Tk Open Systems
> =}ooO--U--Ooo{=
> - bar...@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
>
Re: [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset
Hi Heiko,
On Thu, May 07 2020, Heiko Schocher wrote:
> Am 07.05.2020 um 10:53 schrieb Eugen Hristev:
>> Because of this commit :
>> 5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at
>> probe()")
>> at probe time, each eeprom is tested for read at offset 0.
>>
>> The Atmel AT24MAC402 eeprom has different mapping. One i2c slave address is
>> used for the lower 0x80 bytes and another i2c slave address is used for the
>> upper 0x80 bytes. Because of this basically the i2c master sees 2 different
>> slaves. We need the upper bytes because we read the unique MAC address from
>> this EEPROM area.
>>
>> However this implies that our slave address will return error on reads
>> from address 0x0 to 0x80.
>>
>> To solve this, implemented an offset field inside platform data that is by
>> default 0 (as it is used now), but can be changed in the compatible table.
>>
>> The probe function will now read at this offset and use it, instead of
>> blindly
>> checking offset 0.
>>
>> This will fix the regression noticed on these EEPROMs since the commit
>> abovementioned that introduces the probe failed issue.
>>
>> Signed-off-by: Eugen Hristev
>> ---
>>
>> Please disregard patch
>> [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset
>>
>> as that patch was mistakenly done on an older u-boot version.
>> This v2 patch applies correctly on u-boot/master
>>
>> Changes in v2:
>> - adapt to latest changes in driver. v1 was done on u-boot 2020.01
>> accidentaly.
>>
>> drivers/misc/i2c_eeprom.c | 8 +++-
>> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> Thanks for rebasing!
>
> I prefer to fix the issue instead reverting commit:
>
> 5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
>
> Reviewed-by: Heiko Schocher
>
> @Baruch, is this Ok for you?
According to the Linux driver there are more devices that need read
offset. 24cs32 and 24cs64 are affected. This patch does not fix the
regression for those devices.
Eugen, would it be possible for you to extend the fix to 24cs32/64 and
test on real hardware?
baruch
>> diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
>> index ef5f103c98..32a1b20856 100644
>> --- a/drivers/misc/i2c_eeprom.c
>> +++ b/drivers/misc/i2c_eeprom.c
>> @@ -17,6 +17,7 @@ struct i2c_eeprom_drv_data {
>> u32 pagesize; /* page size in bytes */
>> u32 addr_offset_mask; /* bits in addr used for offset overflow */
>> u32 offset_len; /* size in bytes of offset */
>> +u32 start_offset; /* valid start offset inside memory, by default 0 */
>> };
>> int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int
>> size)
>> @@ -147,7 +148,11 @@ static int i2c_eeprom_std_probe(struct udevice *dev)
>> i2c_set_chip_addr_offset_mask(dev, data->addr_offset_mask);
>> /* Verify that the chip is functional */
>> -ret = i2c_eeprom_read(dev, 0, &test_byte, 1);
>> +/*
>> + * Not all eeproms start from offset 0. Valid offset is available
>> + * in the platform data struct.
>> + */
>> +ret = i2c_eeprom_read(dev, data->start_offset, &test_byte, 1);
>> if (ret)
>> return -ENODEV;
>> @@ -215,6 +220,7 @@ static const struct i2c_eeprom_drv_data
>> atmel24mac402_data = {
>> .pagesize = 16,
>> .addr_offset_mask = 0,
>> .offset_len = 1,
>> +.start_offset = 0x80,
>> };
>> static const struct i2c_eeprom_drv_data atmel24c32_data = {
>>
--
~. .~ Tk Open Systems
=}ooO--U--Ooo{=
- bar...@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
Re: [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset
Hello Eugen,
Am 07.05.2020 um 10:53 schrieb Eugen Hristev:
Because of this commit :
5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
at probe time, each eeprom is tested for read at offset 0.
The Atmel AT24MAC402 eeprom has different mapping. One i2c slave address is
used for the lower 0x80 bytes and another i2c slave address is used for the
upper 0x80 bytes. Because of this basically the i2c master sees 2 different
slaves. We need the upper bytes because we read the unique MAC address from
this EEPROM area.
However this implies that our slave address will return error on reads
from address 0x0 to 0x80.
To solve this, implemented an offset field inside platform data that is by
default 0 (as it is used now), but can be changed in the compatible table.
The probe function will now read at this offset and use it, instead of blindly
checking offset 0.
This will fix the regression noticed on these EEPROMs since the commit
abovementioned that introduces the probe failed issue.
Signed-off-by: Eugen Hristev
---
Please disregard patch
[PATCH] misc: i2c_eeprom: implement different probe test eeprom offset
as that patch was mistakenly done on an older u-boot version.
This v2 patch applies correctly on u-boot/master
Changes in v2:
- adapt to latest changes in driver. v1 was done on u-boot 2020.01 accidentaly.
drivers/misc/i2c_eeprom.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
Thanks for rebasing!
I prefer to fix the issue instead reverting commit:
5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
Reviewed-by: Heiko Schocher
@Baruch, is this Ok for you?
bye,
Heiko
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
index ef5f103c98..32a1b20856 100644
--- a/drivers/misc/i2c_eeprom.c
+++ b/drivers/misc/i2c_eeprom.c
@@ -17,6 +17,7 @@ struct i2c_eeprom_drv_data {
u32 pagesize; /* page size in bytes */
u32 addr_offset_mask; /* bits in addr used for offset overflow */
u32 offset_len; /* size in bytes of offset */
+ u32 start_offset; /* valid start offset inside memory, by default 0 */
};
int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int size)
@@ -147,7 +148,11 @@ static int i2c_eeprom_std_probe(struct udevice *dev)
i2c_set_chip_addr_offset_mask(dev, data->addr_offset_mask);
/* Verify that the chip is functional */
- ret = i2c_eeprom_read(dev, 0, &test_byte, 1);
+ /*
+* Not all eeproms start from offset 0. Valid offset is available
+* in the platform data struct.
+*/
+ ret = i2c_eeprom_read(dev, data->start_offset, &test_byte, 1);
if (ret)
return -ENODEV;
@@ -215,6 +220,7 @@ static const struct i2c_eeprom_drv_data atmel24mac402_data = {
.pagesize = 16,
.addr_offset_mask = 0,
.offset_len = 1,
+ .start_offset = 0x80,
};
static const struct i2c_eeprom_drv_data atmel24c32_data = {
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
[PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset
Because of this commit :
5ae84860b0 ("misc: i2c_eeprom: verify that the chip is functional at probe()")
at probe time, each eeprom is tested for read at offset 0.
The Atmel AT24MAC402 eeprom has different mapping. One i2c slave address is
used for the lower 0x80 bytes and another i2c slave address is used for the
upper 0x80 bytes. Because of this basically the i2c master sees 2 different
slaves. We need the upper bytes because we read the unique MAC address from
this EEPROM area.
However this implies that our slave address will return error on reads
from address 0x0 to 0x80.
To solve this, implemented an offset field inside platform data that is by
default 0 (as it is used now), but can be changed in the compatible table.
The probe function will now read at this offset and use it, instead of blindly
checking offset 0.
This will fix the regression noticed on these EEPROMs since the commit
abovementioned that introduces the probe failed issue.
Signed-off-by: Eugen Hristev
---
Please disregard patch
[PATCH] misc: i2c_eeprom: implement different probe test eeprom offset
as that patch was mistakenly done on an older u-boot version.
This v2 patch applies correctly on u-boot/master
Changes in v2:
- adapt to latest changes in driver. v1 was done on u-boot 2020.01 accidentaly.
drivers/misc/i2c_eeprom.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
index ef5f103c98..32a1b20856 100644
--- a/drivers/misc/i2c_eeprom.c
+++ b/drivers/misc/i2c_eeprom.c
@@ -17,6 +17,7 @@ struct i2c_eeprom_drv_data {
u32 pagesize; /* page size in bytes */
u32 addr_offset_mask; /* bits in addr used for offset overflow */
u32 offset_len; /* size in bytes of offset */
+ u32 start_offset; /* valid start offset inside memory, by default 0 */
};
int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int size)
@@ -147,7 +148,11 @@ static int i2c_eeprom_std_probe(struct udevice *dev)
i2c_set_chip_addr_offset_mask(dev, data->addr_offset_mask);
/* Verify that the chip is functional */
- ret = i2c_eeprom_read(dev, 0, &test_byte, 1);
+ /*
+* Not all eeproms start from offset 0. Valid offset is available
+* in the platform data struct.
+*/
+ ret = i2c_eeprom_read(dev, data->start_offset, &test_byte, 1);
if (ret)
return -ENODEV;
@@ -215,6 +220,7 @@ static const struct i2c_eeprom_drv_data atmel24mac402_data
= {
.pagesize = 16,
.addr_offset_mask = 0,
.offset_len = 1,
+ .start_offset = 0x80,
};
static const struct i2c_eeprom_drv_data atmel24c32_data = {
--
2.25.1
