On 15/07/2013 15:44, Dirk Behme wrote:
Dealing with the sys ctrl register should touch only the
relevant bits and not accidently the whole register. On i.MX6,
the sys control register contains bits which shouldn't be reset to
0, e.g. SYS_CTRL[3-0] and IPP_RST_N (SYS_CTRL[23]).
Do this by read/modify/write instead of just a 32bit write.
Signed-off-by: Dirk Behme dirk.be...@de.bosch.com
---
drivers/mmc/fsl_esdhc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 973b19f..431dac2 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -470,7 +470,7 @@ static int esdhc_init(struct mmc *mmc)
int timeout = 1000;
/* Reset the entire host controller */
- esdhc_write32(regs-sysctl, SYSCTL_RSTA);
+ esdhc_setbits32(regs-sysctl, SYSCTL_RSTA);
/* Wait until the controller is available */
while ((esdhc_read32(regs-sysctl) SYSCTL_RSTA) --timeout)
@@ -481,7 +481,7 @@ static int esdhc_init(struct mmc *mmc)
esdhc_write32(regs-scr, 0x0040);
#endif
- esdhc_write32(regs-sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
+ esdhc_setbits32(regs-sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
/* Set the initial clock speed */
mmc_set_clock(mmc, 40);
@@ -515,7 +515,7 @@ static void esdhc_reset(struct fsl_esdhc *regs)
unsigned long timeout = 100; /* wait max 100 ms */
/* reset the controller */
- esdhc_write32(regs-sysctl, SYSCTL_RSTA);
+ esdhc_setbits32(regs-sysctl, SYSCTL_RSTA);
/* hardware clears the bit when it is done */
while ((esdhc_read32(regs-sysctl) SYSCTL_RSTA) --timeout)
Acked-by: Stefano Babic sba...@denx.de
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
