From: york york...@freescale.com
The board specific parameters associated with quad rank dimms where
missing. This fixes it so the board will function if quad rank dimms
are placed in it.
Signed-off-by: York Sun york...@freescale.com
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
board/freescale/corenet_ds/ddr.c | 18 +-
include/configs/corenet_ds.h |2 +-
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c
index 82b2b4f..18adf2f 100644
--- a/board/freescale/corenet_ds/ddr.c
+++ b/board/freescale/corenet_ds/ddr.c
@@ -66,11 +66,19 @@ typedef struct {
* seem reliable, but errors will appear when memory intensive
* program is run. */
/* XXX: Single rank at 800 MHz is OK. */
-const board_specific_parameters_t board_specific_parameters[][20] = {
+const board_specific_parameters_t board_specific_parameters[][30] = {
{
/* memory controller 0 */
/*lo| hi| num| clk| cpo|wrdata|2T*/
/* mhz| mhz|ranks|adjst|| delay| */
+ { 0, 333,4,6, 7,3, 0},
+ {334, 400,4,6, 9,3, 0},
+ {401, 549,4,6, 11,3, 0},
+ {550, 680,4,1, 10,5, 0},
+ {681, 850,4,1, 12,5, 0},
+ {851, 1050, 4,1, 12,5, 0},
+ {1051, 1250, 4,1, 15,4, 0},
+ {1251, 1350, 4,1, 15,4, 0},
{ 0, 333,2,6, 7,3, 0},
{334, 400,2,6, 9,3, 0},
{401, 549,2,6, 11,3, 0},
@@ -90,6 +98,14 @@ const board_specific_parameters_t
board_specific_parameters[][20] = {
/* memory controller 1 */
/*lo| hi| num| clk| cpo|wrdata|2T*/
/* mhz| mhz|ranks|adjst|| delay| */
+ { 0, 333,4,6, 7,3, 0},
+ {334, 400,4,6, 9,3, 0},
+ {401, 549,4,6, 11,3, 0},
+ {550, 680,4,1, 10,5, 0},
+ {681, 850,4,1, 12,5, 0},
+ {851, 1050, 4,1, 12,5, 0},
+ {1051, 1250, 4,1, 15,4, 0},
+ {1251, 1350, 4,1, 15,4, 0},
{ 0, 333,2, 6, 7,3, 0},
{334, 400,2, 6, 9,3, 0},
{401, 549,2, 6, 11,3, 0},
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index dd609da..3dcee85 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -124,7 +124,7 @@
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
#define CONFIG_DDR_SPD
#define CONFIG_FSL_DDR3
--
1.6.0.6
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
