Re: [U-Boot] [PATCH 00/16] Updates / improvements to bx50v3 support
Hi Martyn, On 08/11/2017 16:59, Martyn Welch wrote: > This series improves the support on the bx50v3 devices (b540v3, b650v3 and > b850v3) and utilising features recently added as part of the PPD > implementation. > > NOTE: This series requires the PPD series: > https://lists.denx.de/pipermail/u-boot/2017-November/310865.html > > Changes outside of the bx50v3/ppd specifc areas: > > - Added driver for RX8010SJ RTC. > - Added functionality to e1000 driver to enable wrting of EEPROM/MAC >address. > > Hannu Lounento (5): > net: e1000: add support for writing to EEPROM See Tom's comments about this patch : http://patchwork.ozlabs.org/patch/849710/ I moved out the series from u-boot-imx until the issues and warnings will be fixed. Best regards, Stefano Babic > net: e1000: split e1000_read_mac_addr > net: e1000: implement eth_write_hwaddr > board: ge: bx50v3: program MAC address to I210 > board: ge: bx50v3: mount rootfs read-only > > Ian Ray (5): > configs: Add network device support for bx50v3 products > board: ge: bx50v3: Support FIT and select configuration based on VPD > config: ge_bx50v3: read boot script > configs: ge_bx50v3: enable bootcount > configs: ge_bx50v3: automatic partition selection and video output > failure message > > Martyn Welch (4): > board: ge: mx53ppd: Move check_time() to common location > board: ge: Enable access to i2c bus 1 and 2 > board: ge: bx50v3: move FEC MAC address programming to driver > board: ge: bx50v3: Enable hardware watchdog > > Nandor Han (2): > rtc: adding RX8010SJ rtc driver > board,ge,bx50v3 - rtc time validation > > board/ge/bx50v3/bx50v3.c| 130 ++- > board/ge/common/Makefile| 2 +- > board/ge/common/ge_common.c | 55 +++ > board/ge/common/ge_common.h | 7 + > board/ge/mx53ppd/mx53ppd.c | 47 +- > configs/ge_b450v3_defconfig | 7 +- > configs/ge_b650v3_defconfig | 7 +- > configs/ge_b850v3_defconfig | 8 +- > drivers/net/e1000.c | 292 +++--- > drivers/net/e1000.h | 3 + > drivers/rtc/Kconfig | 6 + > drivers/rtc/Makefile| 1 + > drivers/rtc/rx8010sj.c | 378 > > include/configs/ge_bx50v3.h | 190 +- > 14 files changed, 911 insertions(+), 222 deletions(-) > create mode 100644 board/ge/common/ge_common.c > create mode 100644 board/ge/common/ge_common.h > create mode 100644 drivers/rtc/rx8010sj.c > -- = DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de = ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 00/16] Updates / improvements to bx50v3 support
Hi Martyn, On 08/11/2017 16:59, Martyn Welch wrote: > This series improves the support on the bx50v3 devices (b540v3, b650v3 and > b850v3) and utilising features recently added as part of the PPD > implementation. > > NOTE: This series requires the PPD series: > https://lists.denx.de/pipermail/u-boot/2017-November/310865.html > > Changes outside of the bx50v3/ppd specifc areas: > > - Added driver for RX8010SJ RTC. > - Added functionality to e1000 driver to enable wrting of EEPROM/MAC >address. > > Hannu Lounento (5): > net: e1000: add support for writing to EEPROM > net: e1000: split e1000_read_mac_addr > net: e1000: implement eth_write_hwaddr > board: ge: bx50v3: program MAC address to I210 > board: ge: bx50v3: mount rootfs read-only > > Ian Ray (5): > configs: Add network device support for bx50v3 products > board: ge: bx50v3: Support FIT and select configuration based on VPD > config: ge_bx50v3: read boot script > configs: ge_bx50v3: enable bootcount > configs: ge_bx50v3: automatic partition selection and video output > failure message > > Martyn Welch (4): > board: ge: mx53ppd: Move check_time() to common location > board: ge: Enable access to i2c bus 1 and 2 > board: ge: bx50v3: move FEC MAC address programming to driver > board: ge: bx50v3: Enable hardware watchdog > > Nandor Han (2): > rtc: adding RX8010SJ rtc driver > board,ge,bx50v3 - rtc time validation > > board/ge/bx50v3/bx50v3.c| 130 ++- > board/ge/common/Makefile| 2 +- > board/ge/common/ge_common.c | 55 +++ > board/ge/common/ge_common.h | 7 + > board/ge/mx53ppd/mx53ppd.c | 47 +- > configs/ge_b450v3_defconfig | 7 +- > configs/ge_b650v3_defconfig | 7 +- > configs/ge_b850v3_defconfig | 8 +- > drivers/net/e1000.c | 292 +++--- > drivers/net/e1000.h | 3 + > drivers/rtc/Kconfig | 6 + > drivers/rtc/Makefile| 1 + > drivers/rtc/rx8010sj.c | 378 > > include/configs/ge_bx50v3.h | 190 +- > 14 files changed, 911 insertions(+), 222 deletions(-) > create mode 100644 board/ge/common/ge_common.c > create mode 100644 board/ge/common/ge_common.h > create mode 100644 drivers/rtc/rx8010sj.c > Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- = DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de = ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
[U-Boot] [PATCH 00/16] Updates / improvements to bx50v3 support
This series improves the support on the bx50v3 devices (b540v3, b650v3 and b850v3) and utilising features recently added as part of the PPD implementation. NOTE: This series requires the PPD series: https://lists.denx.de/pipermail/u-boot/2017-November/310865.html Changes outside of the bx50v3/ppd specifc areas: - Added driver for RX8010SJ RTC. - Added functionality to e1000 driver to enable wrting of EEPROM/MAC address. Hannu Lounento (5): net: e1000: add support for writing to EEPROM net: e1000: split e1000_read_mac_addr net: e1000: implement eth_write_hwaddr board: ge: bx50v3: program MAC address to I210 board: ge: bx50v3: mount rootfs read-only Ian Ray (5): configs: Add network device support for bx50v3 products board: ge: bx50v3: Support FIT and select configuration based on VPD config: ge_bx50v3: read boot script configs: ge_bx50v3: enable bootcount configs: ge_bx50v3: automatic partition selection and video output failure message Martyn Welch (4): board: ge: mx53ppd: Move check_time() to common location board: ge: Enable access to i2c bus 1 and 2 board: ge: bx50v3: move FEC MAC address programming to driver board: ge: bx50v3: Enable hardware watchdog Nandor Han (2): rtc: adding RX8010SJ rtc driver board,ge,bx50v3 - rtc time validation board/ge/bx50v3/bx50v3.c| 130 ++- board/ge/common/Makefile| 2 +- board/ge/common/ge_common.c | 55 +++ board/ge/common/ge_common.h | 7 + board/ge/mx53ppd/mx53ppd.c | 47 +- configs/ge_b450v3_defconfig | 7 +- configs/ge_b650v3_defconfig | 7 +- configs/ge_b850v3_defconfig | 8 +- drivers/net/e1000.c | 292 +++--- drivers/net/e1000.h | 3 + drivers/rtc/Kconfig | 6 + drivers/rtc/Makefile| 1 + drivers/rtc/rx8010sj.c | 378 include/configs/ge_bx50v3.h | 190 +- 14 files changed, 911 insertions(+), 222 deletions(-) create mode 100644 board/ge/common/ge_common.c create mode 100644 board/ge/common/ge_common.h create mode 100644 drivers/rtc/rx8010sj.c -- 2.1.4 ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot