Move this over to Kconfig and tidy up.
Signed-off-by: Simon Glass s...@chromium.org
---
configs/sandbox_defconfig | 1 +
drivers/serial/Kconfig | 20
drivers/serial/serial-uclass.c | 5 +++--
include/configs/sandbox.h | 1 -
include/fdtdec.h | 6 ++
5 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index a6c3252..72740ef 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -15,3 +15,4 @@ CONFIG_CMD_CROS_EC=y
CONFIG_BOOTSTAGE=y
CONFIG_SANDBOX_GPIO=y
CONFIG_SYS_VSNPRINTF=y
+CONFIG_SANDBOX_SERIAL=y
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 2e87199..13b0582 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -85,6 +85,26 @@ config ROCKCHIP_SERIAL
your board config header. The clock input is automatically set to
use the oscillator (24MHz).
+config SANDBOX_SERIAL
+ bool Sandbox UART support
+ depends on SANDBOX DM
+ help
+ Select this to enable a seral UART for sandbox. This is required to
+ operate correctly, otherwise you will see no serial output from
+ sandbox. The emulated UART will display to the console and console
+ input will be fed into the UART. This allows you to interact with
+ U-Boot.
+
+ The operation of the console is controlled by the -t command-line
+ flag. In raw mode, U-Boot sees all characters from the terminal
+ before they are processed, including Ctrl-C. In cooked mode, Ctrl-C
+ is processed by the terminal, and terminates U-Boot. Valid options
+ are:
+
+-t raw-with-sigs Raw mode, Ctrl-C will terminate U-Boot
+-t raw Raw mode, Ctrl-C is processed by U-Boot
+-t cooked Cooked mode, Ctrl-C terminates
+
config UNIPHIER_SERIAL
bool UniPhier on-chip UART support
depends on ARCH_UNIPHIER DM_SERIAL
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 6531841..400629e 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -34,7 +34,7 @@ static void serial_find_console_or_panic(void)
struct udevice *dev;
int node;
- if (OF_CONTROL) {
+ if (OF_CONTROL gd-fdt_blob) {
/* Check for a chosen console */
node = fdtdec_get_chosen_node(gd-fdt_blob, stdout-path);
if (node 0)
@@ -56,7 +56,8 @@ static void serial_find_console_or_panic(void)
return;
}
}
- } else {
+ }
+ if (!SPL_BUILD || !OF_CONTROL || !gd-fdt_blob) {
/*
* Try to use CONFIG_CONS_INDEX if available (it is numbered
* from 1!).
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 8d96999..3b3e1f4 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -114,7 +114,6 @@
#define CONFIG_BAUDRATE115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
-#define CONFIG_SANDBOX_SERIAL
#define CONFIG_SYS_NO_FLASH
diff --git a/include/fdtdec.h b/include/fdtdec.h
index bec2ee9..32a857a 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -41,6 +41,12 @@ struct fdt_memory {
fdt_addr_t end;
};
+#ifdef CONFIG_SPL_BUILD
+#define SPL_BUILD 1
+#else
+#define SPL_BUILD 0
+#endif
+
#ifdef CONFIG_OF_CONTROL
# if defined(CONFIG_SPL_BUILD) defined(SPL_DISABLE_OF_CONTROL)
# define OF_CONTROL 0
--
2.2.0.rc0.207.ga3a616c
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
