These parameters are not used in the code, zap them and the
macros which are used by them as well.
Signed-off-by: Marek Vasut ma...@denx.de
---
drivers/ddr/altera/sequencer.c | 49 +-
drivers/ddr/altera/sequencer.h | 31 --
2 files changed, 5 insertions(+), 75 deletions(-)
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index bc2e457..06a3bf6 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -83,7 +83,6 @@ uint16_t skip_delay_mask; /* mask off bits when
skipping/not-skipping */
struct gbl_type *gbl;
struct param_type *param;
-uint32_t curr_shadow_reg;
static void set_failing_group_stage(uint32_t group, uint32_t stage,
uint32_t substage)
@@ -151,9 +150,6 @@ static void phy_mgr_initialize(void)
param-write_correct_mask_vg = (1 ratio) - 1;
param-read_correct_mask = (1 RW_MGR_MEM_DQ_PER_READ_DQS) - 1;
param-write_correct_mask = (1 RW_MGR_MEM_DQ_PER_WRITE_DQS) - 1;
- ratio = RW_MGR_MEM_DATA_WIDTH /
- RW_MGR_MEM_DATA_MASK_WIDTH;
- param-dm_correct_mask = (1 ratio) - 1;
}
/**
@@ -885,11 +881,6 @@ static void rw_mgr_mem_load_user(const u32 fin1, const u32
fin2,
u32 r;
for (r = 0; r RW_MGR_MEM_NUMBER_OF_RANKS; r++) {
- if (param-skip_ranks[r]) {
- /* request to skip the rank */
- continue;
- }
-
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
@@ -1192,10 +1183,6 @@ rw_mgr_mem_calibrate_write_test(const u32 rank_bgn,
const u32 write_group,
*bit_chk = param-write_correct_mask;
for (r = rank_bgn; r rank_end; r++) {
- /* Request to skip the rank */
- if (param-skip_ranks[r])
- continue;
-
/* Set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
@@ -1266,10 +1253,6 @@ rw_mgr_mem_calibrate_read_test_patterns(const u32
rank_bgn, const u32 group,
bit_chk = param-read_correct_mask;
for (r = rank_bgn; r rank_end; r++) {
- /* Request to skip the rank */
- if (param-skip_ranks[r])
- continue;
-
/* Set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
@@ -1333,10 +1316,6 @@ static void
rw_mgr_mem_calibrate_read_load_patterns(const u32 rank_bgn,
debug(%s:%d\n, __func__, __LINE__);
for (r = rank_bgn; r rank_end; r++) {
- if (param-skip_ranks[r])
- /* request to skip the rank */
- continue;
-
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
@@ -1403,10 +1382,6 @@ rw_mgr_mem_calibrate_read_test(const u32 rank_bgn, const
u32 group,
*bit_chk = param-read_correct_mask;
for (r = rank_bgn; r rank_end; r++) {
- if (param-skip_ranks[r])
- /* request to skip the rank */
- continue;
-
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
@@ -2662,10 +2637,6 @@ rw_mgr_mem_calibrate_dq_dqs_centering(const u32
rw_group, const u32 test_bgn,
for (rank_bgn = 0, sr = 0;
rank_bgn RW_MGR_MEM_NUMBER_OF_RANKS;
rank_bgn += NUM_RANKS_PER_SHADOW_REG, sr++) {
- /* Check if this set of ranks should be skipped entirely. */
- if (param-skip_shadow_regs[sr])
- continue;
-
ret = rw_mgr_mem_calibrate_vfifo_center(rank_bgn, rw_group,
test_bgn,
use_read_test,
@@ -3159,10 +3130,6 @@ static void mem_precharge_and_activate(void)
int r;
for (r = 0; r RW_MGR_MEM_NUMBER_OF_RANKS; r++) {
- /* Test if the rank should be skipped. */
- if (param-skip_ranks[r])
- continue;
-
/* Set rank. */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
@@ -3380,7 +3347,7 @@ static uint32_t mem_calibrate(void)
*/
scc_mgr_zero_all();
- run_groups = ~param-skip_groups;
+ run_groups = ~0;
for (write_group = 0, write_test_bgn = 0; write_group
RW_MGR_MEM_IF_WRITE_DQS_WIDTH; write_group++,
@@ -3432,13 +3399,6 @@ static uint32_t mem_calibrate(void)
if (STATIC_CALIB_STEPS
CALIB_SKIP_DELAY_SWEEPS)
continue;
- /*
-* Determine if this set of ranks
-* should be skipped entirely.
-
