Re: [U-Boot] [PATCH 032/126] pci: Show a message if PCI autoconfig fails
On Sat, Oct 5, 2019 at 9:12 PM Bin Meng wrote: > > On Wed, Sep 25, 2019 at 10:58 PM Simon Glass wrote: > > > > At present this fails silently which can be confusing since some devices > > on the PCI bus may not work correctly. Show a message in this case > > nits: missing . after case Fixed, and > > > > > Signed-off-by: Simon Glass > > --- > > > > drivers/pci/pci_auto.c | 12 +--- > > 1 file changed, 9 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c > > index 1a3bf708347..7755ffb6fa2 100644 > > --- a/drivers/pci/pci_auto.c > > +++ b/drivers/pci/pci_auto.c > > @@ -39,6 +39,8 @@ void dm_pciauto_setup_device(struct udevice *dev, int > > bars_num, > > > > for (bar = PCI_BASE_ADDRESS_0; > > bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) { > > + int ret = 0; > > + > > /* Tickle the BAR and get the response */ > > if (!enum_only) > > dm_pci_write_config32(dev, bar, 0x); > > @@ -97,9 +99,13 @@ void dm_pciauto_setup_device(struct udevice *dev, int > > bars_num, > > (unsigned long long)bar_size); > > } > > > > - if (!enum_only && pciauto_region_allocate(bar_res, bar_size, > > - _value, > > - found_mem64) == > > 0) { > > + if (!enum_only) { > > + ret = pciauto_region_allocate(bar_res, bar_size, > > + _value, > > found_mem64); > > + if (ret) > > + printf("PCI: Failed autoconfig bar %x", > > bar); > > nits: should have a '\n' Added a '\n', and > > > + } > > + if (!enum_only && !ret) { > > /* Write it out and update our limit */ > > dm_pci_write_config32(dev, bar, (u32)bar_value); > > > > -- > > Other than above, > Reviewed-by: Bin Meng applied to u-boot-x86/next, thanks! ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 032/126] pci: Show a message if PCI autoconfig fails
On Wed, Sep 25, 2019 at 10:58 PM Simon Glass wrote: > > At present this fails silently which can be confusing since some devices > on the PCI bus may not work correctly. Show a message in this case nits: missing . after case > > Signed-off-by: Simon Glass > --- > > drivers/pci/pci_auto.c | 12 +--- > 1 file changed, 9 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c > index 1a3bf708347..7755ffb6fa2 100644 > --- a/drivers/pci/pci_auto.c > +++ b/drivers/pci/pci_auto.c > @@ -39,6 +39,8 @@ void dm_pciauto_setup_device(struct udevice *dev, int > bars_num, > > for (bar = PCI_BASE_ADDRESS_0; > bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) { > + int ret = 0; > + > /* Tickle the BAR and get the response */ > if (!enum_only) > dm_pci_write_config32(dev, bar, 0x); > @@ -97,9 +99,13 @@ void dm_pciauto_setup_device(struct udevice *dev, int > bars_num, > (unsigned long long)bar_size); > } > > - if (!enum_only && pciauto_region_allocate(bar_res, bar_size, > - _value, > - found_mem64) == 0) { > + if (!enum_only) { > + ret = pciauto_region_allocate(bar_res, bar_size, > + _value, > found_mem64); > + if (ret) > + printf("PCI: Failed autoconfig bar %x", bar); nits: should have a '\n' > + } > + if (!enum_only && !ret) { > /* Write it out and update our limit */ > dm_pci_write_config32(dev, bar, (u32)bar_value); > > -- Other than above, Reviewed-by: Bin Meng ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
[U-Boot] [PATCH 032/126] pci: Show a message if PCI autoconfig fails
At present this fails silently which can be confusing since some devices on the PCI bus may not work correctly. Show a message in this case Signed-off-by: Simon Glass --- drivers/pci/pci_auto.c | 12 +--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 1a3bf708347..7755ffb6fa2 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -39,6 +39,8 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num, for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) { + int ret = 0; + /* Tickle the BAR and get the response */ if (!enum_only) dm_pci_write_config32(dev, bar, 0x); @@ -97,9 +99,13 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num, (unsigned long long)bar_size); } - if (!enum_only && pciauto_region_allocate(bar_res, bar_size, - _value, - found_mem64) == 0) { + if (!enum_only) { + ret = pciauto_region_allocate(bar_res, bar_size, + _value, found_mem64); + if (ret) + printf("PCI: Failed autoconfig bar %x", bar); + } + if (!enum_only && !ret) { /* Write it out and update our limit */ dm_pci_write_config32(dev, bar, (u32)bar_value); -- 2.23.0.444.g18eeb5a265-goog ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot