Refresh for newer kernel.
Prepare ENV settings for sheevaplugs to be OpenWRT ready.
+----------+
| UBOOT | >> 896 Kb (7x128) = uboot
+----------+
| ENV | >> 128 Kb = uboot_env
+----------+
| ROOT(FS) | >> 511 Mb @ 1 Mb = root -> rootfs (ubifs)
+----------+
With (CC) TRUNK OpenWRT build (QUICK HOWTO) :
<INTERRUPT>
Marvell>> nand erase.part root
Marvell>> ubi part root
Marvell>> ubi remove rootfs
Marvell>> ubi create rootfs
Marvell>> usb reset
Marvell>> fatload usb 2:1 0x800000
guruplug/openwrt/openwrt-kirkwood-guruplug-rootfs.ubifs
Marvell>> ubi write 0x800000 rootfs ${filesize}
Marvell>> reset
Changes in v1:
- ADD generic board define
- ADD FDT support
- ADD HUSH interpreter
- Define new NAND partition mapping
Signed-off-by: Gerald Kerma <drea...@doukki.net>
---
include/configs/guruplug.h | 84 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 67 insertions(+), 17 deletions(-)
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index a56a4cb..8e53af8 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -1,5 +1,6 @@
/*
- * (C) Copyright 2009
+ * (C) Copyright 2009-2014
+ * Gerald Kerma <drea...@doukki.net>
* Marvell Semiconductor <www.marvell.com>
* Written-by: Siddarth Gore <go...@marvell.com>
*
@@ -9,6 +10,8 @@
#ifndef _CONFIG_GURUPLUG_H
#define _CONFIG_GURUPLUG_H
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Version number information
*/
@@ -23,17 +26,36 @@
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
+ * Compression configuration
+ */
+#define CONFIG_BZIP2
+#define CONFIG_LZMA
+#define CONFIG_LZO
+
+/*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+
+/*
* Commands configuration
*/
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
/*
* mv-common.h should be defined after CMD configs since it used them
@@ -55,24 +77,38 @@
* it has to be rounded to sector size
*/
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
-#define CONFIG_ENV_ADDR 0x60000
-#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
+#define CONFIG_ENV_OFFSET 0xE0000 /* env starts here */
/*
* Default environment variables
*/
-#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
- "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
- "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
- "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
- "bootm 0x6400000;"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "x_bootcmd_ethernet=ping 192.168.2.1\0" \
- "x_bootcmd_usb=usb start\0" \
- "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
- "x_bootargs=console=ttyS0,115200\0" \
- "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
+ "ubi part root; " \
+ "ubifsmount ubi:rootfs; " \
+ "ubifsload 0x800000 ${kernel}; " \
+ "ubifsload 0x700000 ${fdt}; " \
+ "ubifsumount; " \
+ "fdt addr 0x700000; fdt resize; fdt chosen; " \
+ "bootz 0x800000 - 0x700000"
+
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:" \
+ "896K(uboot),128K(uboot_env)," \
+ "-@1M(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS \
+ "kernel=/boot/zImage\0" \
+ "fdt=/boot/guruplug-server-plus.dtb\0" \
+ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
+
+#define MTDIDS_DEFAULT "nand0=orion_nand"
+
+#define MTDPARTS_DEFAULT \
+ "mtdparts="CONFIG_MTDPARTS
/*
* Ethernet Driver configuration
@@ -89,6 +125,20 @@
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+
#define CONFIG_SYS_ALT_MEMTEST
#endif /* _CONFIG_GURUPLUG_H */
--
2.1.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
