Re: [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Tom == Tom Rini tr...@ti.com writes: Tom In the case of booting from certain peripherals, such as UART, we must Tom not see what the device descriptor says for RAW or FAT mode because in Tom addition to being nonsensical, it leads to a hang. This is why we have Tom a test currently for the boot mode being within range. The problem Tom however is that on some platforms we get MMC2_2 as the boot mode and not Tom the defined value for MMC2, and in others we get the value for MMC2_2. Tom This is required to fix eMMC booting on omap5_uevm. Tom Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on Tom classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Tom Signed-off-by: Tom Rini tr...@ti.com Tom --- Tom arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +++--- Tom arch/arm/include/asm/arch-am33xx/spl.h |3 +++ Tom arch/arm/include/asm/arch-omap3/spl.h |3 +++ Tom arch/arm/include/asm/arch-omap4/spl.h |2 ++ Tom arch/arm/include/asm/arch-omap5/spl.h |2 ++ Tom 5 files changed, 17 insertions(+), 3 deletions(-) Tom diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom index b933fe8..90b3c8a 100644 Tom --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom @@ -60,10 +60,14 @@ ENTRY(save_boot_params) Tom ldr r3, =boot_params Tom strbr2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device - r1 Tom - /* boot mode is passed only for devices that can raw/fat mode */ Tom - cmp r2, #BOOT_DEVICE_XIP Tom + /* Tom + * boot mode is only valid for device that can be raw or FAT booted. Tom + * in other cases it may be fatal to look. While platforms differ Tom + * in the values used for each MMC slot, they are contiguous. Tom + */ Tom + cmp r2, #MMC_BOOT_DEVICES_START Tom blt 2f Tom - cmp r2, #BOOT_DEVICE_MMC2 Tom + cmp r2, #MMC_BOOT_DEVICES_END Tom bgt 2f Tom /* Store the boot mode (raw/FAT) in omap_bootmode */ Tom ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr Tom diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h Tom index f60b086..14a2c7c 100644 Tom --- a/arch/arm/include/asm/arch-am33xx/spl.h Tom +++ b/arch/arm/include/asm/arch-am33xx/spl.h Tom @@ -37,4 +37,7 @@ Tom #define BOOT_DEVICE_USBETH 68 Tom #define BOOT_DEVICE_CPGMAC 70 Tom #define BOOT_DEVICE_MMC2_2 0xFF Tom + Tom +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 Tom +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 Doesn't this break ti814x with the funky inverted mmc1/mmc2? -- Bye, Peter Korsgaard ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 04/09/2013 10:52 AM, Peter Korsgaard wrote: Tom == Tom Rini tr...@ti.com writes: Tom In the case of booting from certain peripherals, such as UART, we must Tom not see what the device descriptor says for RAW or FAT mode because in Tom addition to being nonsensical, it leads to a hang. This is why we have Tom a test currently for the boot mode being within range. The problem Tom however is that on some platforms we get MMC2_2 as the boot mode and not Tom the defined value for MMC2, and in others we get the value for MMC2_2. Tom This is required to fix eMMC booting on omap5_uevm. Tom Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on Tom classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Tom Signed-off-by: Tom Rini tr...@ti.com Tom --- Tom arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +++--- Tom arch/arm/include/asm/arch-am33xx/spl.h |3 +++ Tom arch/arm/include/asm/arch-omap3/spl.h |3 +++ Tom arch/arm/include/asm/arch-omap4/spl.h |2 ++ Tom arch/arm/include/asm/arch-omap5/spl.h |2 ++ Tom 5 files changed, 17 insertions(+), 3 deletions(-) Tom diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom index b933fe8..90b3c8a 100644 Tom --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S Tom @@ -60,10 +60,14 @@ ENTRY(save_boot_params) Tomldr r3, =boot_params Tom strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device - r1 Tom -/* boot mode is passed only for devices that can raw/fat mode */ Tom -cmp r2, #BOOT_DEVICE_XIP Tom + /* Tom + * boot mode is only valid for device that can be raw or FAT booted. Tom + * in other cases it may be fatal to look. While platforms differ Tom + * in the values used for each MMC slot, they are contiguous. Tom + */ Tom + cmp r2, #MMC_BOOT_DEVICES_START Tom blt 2f Tom - cmp r2, #BOOT_DEVICE_MMC2 Tom +cmp r2, #MMC_BOOT_DEVICES_END Tombgt 2f Tom /* Store the boot mode (raw/FAT) in omap_bootmode */ Tomldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr Tom diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h Tom index f60b086..14a2c7c 100644 Tom --- a/arch/arm/include/asm/arch-am33xx/spl.h Tom +++ b/arch/arm/include/asm/arch-am33xx/spl.h Tom @@ -37,4 +37,7 @@ Tom #define BOOT_DEVICE_USBETH 68 Tom #define BOOT_DEVICE_CPGMAC70 Tom #define BOOT_DEVICE_MMC2_2 0xFF Tom + Tom +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 Tom +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 Doesn't this break ti814x with the funky inverted mmc1/mmc2? That's probably true, dang. I knew OMAP3 also had them swapped, number-wise but didn't recall until you said this that it doesn't use that code at all. I'll V2 this part. Thanks! - -- Tom -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRZDY4AAoJENk4IS6UOR1WUBoP/1wPoJ5C0ZCSpEDmm7YFs5b2 XaafK0dIJ/aw7K264vYY8tHBj/ku6mbgNOvfRUL9rxGAPPStESMQynkwF/H7llbd 7GkFlsWpLAgotPnCSwHGqQnApCeUeu0BGCAGvaB8NK0uFlU+D0bsWBdgRe/sML+m LjF0/2eQmm2rTo8ifkDTvCdldaeyGqUo0amefEvfW2cLMxPlYGWcfPh/MW1X35ib RnnBUhdVM38XPKmktjSQMQ4IBkLnd2Hu64KFkZl3ejyMPDjr/uOkm+1UawL34IPH wgSC5Y1+w7HvnxM+D3pre4yrpRSYq+dcg3m9CLb7HcrGFCjLxtTEEcy6DOCF3RG0 aK62JQ0itrXcGCnwMYO6t/w7JlNj/flqCTQW4qU4HJ/ixaICRrg30IePqqcJ0Rj0 69EA4BjgR8JhRZOWRuCkwirz0LQpg7DY43Ioax7EmZ6qjve7/ryEnPxdfSEWTPgr ZcqhsYCwoc0wkADW894UveUW49qXhQCBR0C1eXbynfbpdWSu0ObHX4ErAH1JP4x/ ihtuMZAoTcpYTM0b/Fg+A9t45QhIZBMRKLWar4h5zFrMGyfIODPUjXLqJRSI6Lef kTcUZY9Fy837Vok1NlllTMFxGd8Ot5mRgDehvZiZlTjzbRUfPdC212NUQQ/px7C8 7KPGRHhQds5Fsur7bnXJ =2NME -END PGP SIGNATURE- ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Hi Tom, On Friday 05 April 2013 09:51 PM, Tom Rini wrote: In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini tr...@ti.com --- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +++--- arch/arm/include/asm/arch-am33xx/spl.h |3 +++ arch/arm/include/asm/arch-omap3/spl.h |3 +++ arch/arm/include/asm/arch-omap4/spl.h |2 ++ arch/arm/include/asm/arch-omap5/spl.h |2 ++ 5 files changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index b933fe8..90b3c8a 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -60,10 +60,14 @@ ENTRY(save_boot_params) ldr r3, =boot_params strbr2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device - r1 - /* boot mode is passed only for devices that can raw/fat mode */ - cmp r2, #BOOT_DEVICE_XIP + /* + * boot mode is only valid for device that can be raw or FAT booted. + * in other cases it may be fatal to look. While platforms differ + * in the values used for each MMC slot, they are contiguous. + */ + cmp r2, #MMC_BOOT_DEVICES_START blt 2f - cmp r2, #BOOT_DEVICE_MMC2 + cmp r2, #MMC_BOOT_DEVICES_END bgt 2f /* Store the boot mode (raw/FAT) in omap_bootmode */ ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index f60b086..14a2c7c 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -37,4 +37,7 @@ #define BOOT_DEVICE_USBETH 68 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #endif diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index dec4dac..84e6d7b 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -31,4 +31,7 @@ #define BOOT_DEVICE_MMC1 6 #define BOOT_DEVICE_XIPWAIT 7 #define BOOT_DEVICE_MMC2_2 0xFF + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 #endif diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index 4e094f9..f61627f 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -32,4 +32,6 @@ #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 0xFF +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #endif diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index 323cd63..d4d353c 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -32,4 +32,6 @@ #define BOOT_DEVICE_MMC26 #define BOOT_DEVICE_MMC2_2 7 +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 #endif Acked-by: R Sricharan r.sricha...@ti.com ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini tr...@ti.com --- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 10 +++--- arch/arm/include/asm/arch-am33xx/spl.h |3 +++ arch/arm/include/asm/arch-omap3/spl.h |3 +++ arch/arm/include/asm/arch-omap4/spl.h |2 ++ arch/arm/include/asm/arch-omap5/spl.h |2 ++ 5 files changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index b933fe8..90b3c8a 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -60,10 +60,14 @@ ENTRY(save_boot_params) ldr r3, =boot_params strbr2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device - r1 - /* boot mode is passed only for devices that can raw/fat mode */ - cmp r2, #BOOT_DEVICE_XIP + /* +* boot mode is only valid for device that can be raw or FAT booted. +* in other cases it may be fatal to look. While platforms differ +* in the values used for each MMC slot, they are contiguous. +*/ + cmp r2, #MMC_BOOT_DEVICES_START blt 2f - cmp r2, #BOOT_DEVICE_MMC2 + cmp r2, #MMC_BOOT_DEVICES_END bgt 2f /* Store the boot mode (raw/FAT) in omap_bootmode */ ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index f60b086..14a2c7c 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -37,4 +37,7 @@ #define BOOT_DEVICE_USBETH 68 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #endif diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index dec4dac..84e6d7b 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -31,4 +31,7 @@ #define BOOT_DEVICE_MMC1 6 #define BOOT_DEVICE_XIPWAIT7 #define BOOT_DEVICE_MMC2_2 0xFF + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 #endif diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index 4e094f9..f61627f 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -32,4 +32,6 @@ #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 0xFF +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 #endif diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index 323cd63..d4d353c 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -32,4 +32,6 @@ #define BOOT_DEVICE_MMC26 #define BOOT_DEVICE_MMC2_2 7 +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 #endif -- 1.7.9.5 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
