Re: [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value

2011-11-16 Thread Stefano Babic 
On 11/15/2011 04:51 PM, Fabio Estevam wrote:
 Configure the pins as GPIO prior to using gpio_get_value.

 Cc: Jason Liur64...@freescale.com
 Signed-off-by: Fabio Estevamfabio.este...@freescale.com
 ---
   board/freescale/mx53loco/mx53loco.c |3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)


Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=
DENX Software Engineering GmbH, MD: Wolfgang Denk  Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: off...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value

2011-11-15 Thread Fabio Estevam 
Configure the pins as GPIO prior to using gpio_get_value.

Cc: Jason Liu r64...@freescale.com
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
 board/freescale/mx53loco/mx53loco.c |3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53loco/mx53loco.c 
b/board/freescale/mx53loco/mx53loco.c
index b4c7f33..5e5c38f 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -139,6 +139,9 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
 int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc-priv;
+
+   mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
+   mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
 
if (cfg-esdhc_base == MMC_SDHC1_BASE_ADDR)
*cd = gpio_get_value(77); /*GPIO3_13*/
-- 
1.7.1

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value

2011-11-15 Thread Jason Liu 
2011/11/15 Fabio Estevam feste...@gmail.com:
 Configure the pins as GPIO prior to using gpio_get_value.

 Cc: Jason Liu r64...@freescale.com
 Signed-off-by: Fabio Estevam fabio.este...@freescale.com

Acked-by: Jason Liu jason@linaro.org

 ---
  board/freescale/mx53loco/mx53loco.c |    3 +++
  1 files changed, 3 insertions(+), 0 deletions(-)

 diff --git a/board/freescale/mx53loco/mx53loco.c 
 b/board/freescale/mx53loco/mx53loco.c
 index b4c7f33..5e5c38f 100644
 --- a/board/freescale/mx53loco/mx53loco.c
 +++ b/board/freescale/mx53loco/mx53loco.c
 @@ -139,6 +139,9 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
  int board_mmc_getcd(u8 *cd, struct mmc *mmc)
  {
        struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc-priv;
 +
 +       mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
 +       mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);

        if (cfg-esdhc_base == MMC_SDHC1_BASE_ADDR)
                *cd = gpio_get_value(77); /*GPIO3_13*/
 --
 1.7.1

 ___
 U-Boot mailing list
 U-Boot@lists.denx.de
 http://lists.denx.de/mailman/listinfo/u-boot

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot