Re: [U-Boot] [PATCH 1/5] tbs2910: support for usb otg host mode

[Stefano Babic]

On 05/05/2015 23:09, Soeren Moch wrote:
> Add support for USB OTG host mode. Only high speed devices supported so far
> (e.g. usb 2.0 hub required to connect a keyboard).
> 
> Signed-off-by: Soeren Moch 
> ---
> Cc: Stefano Babic 
> ---

Applied to u-boot-imx, thanks !

Best regards,
 Stefano Babic


-- 
=
DENX Software Engineering GmbH,  Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 1/5] tbs2910: support for usb otg host mode

[Soeren Moch]

Add support for USB OTG host mode. Only high speed devices supported so far
(e.g. usb 2.0 hub required to connect a keyboard).

Signed-off-by: Soeren Moch 
---
Cc: Stefano Babic 
---
 board/tbs/tbs2910/tbs2910.c | 10 ++
 include/configs/tbs2910.h   |  1 +
 2 files changed, 11 insertions(+)

diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c
index 42b166d..0b509b6 100644
--- a/board/tbs/tbs2910/tbs2910.c
+++ b/board/tbs/tbs2910/tbs2910.c
@@ -372,6 +372,12 @@ static const struct boot_mode board_boot_modes[] = {
 };
 #endif
 
+#ifdef CONFIG_USB_EHCI_MX6
+static iomux_v3_cfg_t const usb_otg_pads[] = {
+   MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+#endif
+
 int board_init(void)
 {
/* address of boot parameters */
@@ -391,6 +397,10 @@ int board_init(void)
 #ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
 #endif
+#ifdef CONFIG_USB_EHCI_MX6
+   imx_iomux_v3_setup_multiple_pads(
+   usb_otg_pads, ARRAY_SIZE(usb_otg_pads));
+#endif
return 0;
 }
 
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 7089378..e5828e0 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -163,6 +163,7 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB_MASS_STORAGE
-- 
1.9.1

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot