SPL supports reading U-Boot from a RAM location. At present this is
hard-coded to the U-Boot text base address. Use binman to allow this to
come from the image file, if binman is used.
Signed-off-by: Simon Glass
---
common/spl/spl_ram.c | 19 +++
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c
index b2645a19480..fa8c768773a 100644
--- a/common/spl/spl_ram.c
+++ b/common/spl/spl_ram.c
@@ -11,6 +11,8 @@
* SPDX-License-Identifier:GPL-2.0+
*/
#include
+#include
+#include
#include
#include
@@ -48,15 +50,24 @@ static int spl_ram_load_image(struct spl_image_info
*spl_image,
load.read = spl_ram_load_read;
spl_load_simple_fit(spl_image, &load, 0, header);
} else {
+ ulong u_boot_pos = binman_sym(ulong, u_boot_any, pos);
+
debug("Legacy image\n");
/*
* Get the header. It will point to an address defined by
* handoff which will tell where the image located inside
-* the flash. For now, it will temporary fixed to address
-* pointed by U-Boot.
+* the flash.
*/
- header = (struct image_header *)
- (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
+ debug("u_boot_pos = %lx\n", u_boot_pos);
+ if (u_boot_pos == BINMAN_SYM_MISSING) {
+ /*
+* No binman support or no information. For now, fix it
+* to the address pointed to by U-Boot.
+*/
+ u_boot_pos = CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header);
+ }
+ header = (struct image_header *)map_sysmem(u_boot_pos, 0);
spl_parse_image_header(spl_image, header);
}
--
2.15.0.448.gf294e3d99a-goog
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot