With new mailbox driver PMUFW configuration object can be loaded via the
same interface and there is no need to have pmu_ipc.c completely.
Signed-off-by: Michal Simek
---
arch/arm/mach-zynqmp/Makefile | 4 -
arch/arm/mach-zynqmp/include/mach/sys_proto.h | 2 -
arch/arm/mach-zynqmp/pmu_ipc.c| 112 --
drivers/firmware/firmware-zynqmp.c| 24
include/zynqmp_firmware.h | 1 +
5 files changed, 25 insertions(+), 118 deletions(-)
delete mode 100644 arch/arm/mach-zynqmp/pmu_ipc.c
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
index f3765e45b1b9..8a3b0747244a 100644
--- a/arch/arm/mach-zynqmp/Makefile
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -8,7 +8,3 @@ obj-y += cpu.o
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o
obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
-
-ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")
-obj-$(CONFIG_SPL_BUILD) += pmu_ipc.o
-endif
diff --git a/arch/arm/mach-zynqmp/include/mach/sys_proto.h
b/arch/arm/mach-zynqmp/include/mach/sys_proto.h
index 27603a60ff8f..69e729fb7625 100644
--- a/arch/arm/mach-zynqmp/include/mach/sys_proto.h
+++ b/arch/arm/mach-zynqmp/include/mach/sys_proto.h
@@ -60,6 +60,4 @@ int chip_id(unsigned char id);
void tcm_init(u8 mode);
#endif
-void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size);
-
#endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/arch/arm/mach-zynqmp/pmu_ipc.c b/arch/arm/mach-zynqmp/pmu_ipc.c
deleted file mode 100644
index d8858ea3ff99..
--- a/arch/arm/mach-zynqmp/pmu_ipc.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Inter-Processor Communication with the Platform Management Unit (PMU)
- * firmware.
- *
- * (C) Copyright 2019 Luca Ceresoli
- * Luca Ceresoli
- */
-
-#include
-#include
-#include
-
-/* IPI bitmasks, register base and register offsets */
-#define IPI_BIT_MASK_APU 0x1
-#define IPI_BIT_MASK_PMU0 0x1
-#define IPI_REG_BASE_APU 0xFF30
-#define IPI_REG_BASE_PMU0 0xFF33
-#define IPI_REG_OFFSET_TRIG 0x00
-#define IPI_REG_OFFSET_OBR0x04
-
-/* IPI mailbox buffer offsets */
-#define IPI_BUF_BASE_APU 0xFF990400
-#define IPI_BUF_OFFSET_TARGET_PMU 0x1C0
-#define IPI_BUF_OFFSET_REQ 0x00
-#define IPI_BUF_OFFSET_RESP0x20
-
-#define PMUFW_PAYLOAD_ARG_CNT 8
-
-/* PMUFW commands */
-#define PMUFW_CMD_SET_CONFIGURATION2
-
-static void pmu_ipc_send_request(const u32 *req, size_t req_len)
-{
- u32 *mbx = (u32 *)(IPI_BUF_BASE_APU +
- IPI_BUF_OFFSET_TARGET_PMU +
- IPI_BUF_OFFSET_REQ);
- size_t i;
-
- for (i = 0; i < req_len; i++)
- writel(req[i], &mbx[i]);
-}
-
-static void pmu_ipc_read_response(unsigned int *value, size_t count)
-{
- u32 *mbx = (u32 *)(IPI_BUF_BASE_APU +
- IPI_BUF_OFFSET_TARGET_PMU +
- IPI_BUF_OFFSET_RESP);
- size_t i;
-
- for (i = 0; i < count; i++)
- value[i] = readl(&mbx[i]);
-}
-
-/**
- * Send request to PMU and get the response.
- *
- * @req:Request buffer. Byte 0 is the API ID, other bytes are optional
- * parameters.
- * @req_len:Request length in number of 32-bit words.
- * @res:Response buffer. Byte 0 is the error code, other bytes are
- * optional parameters. Optional, if @res_maxlen==0 the parameters
- * will not be read.
- * @res_maxlen: Space allocated for the response in number of 32-bit words.
- *
- * @return Error code returned by the PMU (i.e. the first word of the response)
- */
-static int pmu_ipc_request(const u32 *req, size_t req_len,
- u32 *res, size_t res_maxlen)
-{
- u32 status;
-
- if (req_len > PMUFW_PAYLOAD_ARG_CNT ||
- res_maxlen > PMUFW_PAYLOAD_ARG_CNT)
- return -EINVAL;
-
- pmu_ipc_send_request(req, req_len);
-
- /* Raise Inter-Processor Interrupt to PMU and wait for response */
- writel(IPI_BIT_MASK_PMU0, IPI_REG_BASE_APU + IPI_REG_OFFSET_TRIG);
- do {
- status = readl(IPI_REG_BASE_APU + IPI_REG_OFFSET_OBR);
- } while (status & IPI_BIT_MASK_PMU0);
-
- pmu_ipc_read_response(res, res_maxlen);
-
- return 0;
-}
-
-/**
- * Send a configuration object to the PMU firmware.
- *
- * @cfg_obj: Pointer to the configuration object
- * @size:Size of @cfg_obj in bytes
- */
-void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size)
-{
- const u32 request[] = {
- PMUFW_CMD_SET_CONFIGURATION,
- (u32)((u64)cfg_obj)
- };
- u32 response;
- int err;
-
- printf("Loading PMUFW cfg obj (%ld bytes)\n", size);
-
- err = pmu_ipc_request(request, ARRAY_SIZE(request), &response, 1);
- if (err)
-