Re: [U-Boot] [PATCH 2/2] net: macb: Add support for 1000-baseX

2019-07-08 Thread Joe Hershberger 
On Fri, Jun 7, 2019 at 8:48 AM Radu Pirea  wrote:
>
> Macb can be used with Xilinx PCS/PMA PHY in fpga which is a 1000-baseX
> phy(lpa 0x41e0). This patch adds checks for LPA_1000XFULL and
> LPA_1000XHALF bits.
>
> Signed-off-by: Radu Pirea 

Acked-by: Joe Hershberger 
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

[U-Boot] [PATCH 2/2] net: macb: Add support for 1000-baseX

2019-06-07 Thread Radu Pirea 
Macb can be used with Xilinx PCS/PMA PHY in fpga which is a 1000-baseX
phy(lpa 0x41e0). This patch adds checks for LPA_1000XFULL and
LPA_1000XHALF bits.

Signed-off-by: Radu Pirea 
---
 drivers/net/macb.c | 6 --
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 3632650983..476ecc0ca9 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -572,8 +572,10 @@ static int macb_phy_init(struct macb_device *macb, const 
char *name)
if (gem_is_gigabit_capable(macb)) {
lpa = macb_mdio_read(macb, MII_LPA);
 
-   if (lpa & (LPA_1000FULL | LPA_1000HALF)) {
-   duplex = ((lpa & LPA_1000FULL) ? 1 : 0);
+   if (lpa & (LPA_1000FULL | LPA_1000HALF | LPA_1000XFULL |
+   LPA_1000XHALF)) {
+   duplex = ((lpa & (LPA_1000FULL | LPA_1000XFULL)) ?
+   1 : 0);
 
printf("%s: link up, 1000Mbps %s-duplex (lpa: 
0x%04x)\n",
   name,
-- 
2.21.0

___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot