Re: [U-Boot] [PATCH 2/2] powerpc/85xx: corrected p1_p2_rdb EEPROM address

[Kumar Gala]

On Feb 9, 2011, at 11:48 PM, Kumar Gala wrote:

 From: Priyanka Jain priyanka.j...@freescale.com
 
 Board EEPROM is used to read/save Ethernet MAC addresses.
 
 Signed-off-by: Priyanka Jain priyanka.j...@freescale.com
 Signed-off-by: Kumar Gala ga...@kernel.crashing.org
 ---
 include/configs/P1_P2_RDB.h |3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

applied to 85xx

- k
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 2/2] powerpc/85xx: corrected p1_p2_rdb EEPROM address

[Kumar Gala]

From: Priyanka Jain priyanka.j...@freescale.com

Board EEPROM is used to read/save Ethernet MAC addresses.

Signed-off-by: Priyanka Jain priyanka.j...@freescale.com
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
 include/configs/P1_P2_RDB.h |3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index bf34740..982cdd5 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -344,7 +344,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED   40  /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
 #define CONFIG_SYS_I2C_SLAVE   0x7F
 #define CONFIG_SYS_I2C_NOPROBES{{0,0x29}}  /* Don't probe these 
addrs */
 #define CONFIG_SYS_I2C_OFFSET  0x3000
@@ -357,7 +356,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #ifdef CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_BUS_NUM  1
 
-- 
1.7.2.3

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot