[U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality
Signed-off-by: Tom Warren --- arch/arm/include/asm/arch-tegra2/gpio.h | 59 + arch/arm/include/asm/arch-tegra2/tegra2.h |1 + 2 files changed, 60 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h b/arch/arm/include/asm/arch-tegra2/gpio.h new file mode 100644 index 000..0fb8f0d --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/gpio.h @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2011, Google Inc. All rights reserved. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA2_GPIO_H_ +#define _TEGRA2_GPIO_H_ + +/* + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4 ports, + * each with 8 GPIOs. + */ +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */ +#define TEGRA_GPIO_BANKS 8 /* The number of banks */ + +/* GPIO Controller registers for a single bank */ +struct gpio_ctlr_bank { + uint gpio_config[TEGRA_GPIO_PORTS]; + uint gpio_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_out[TEGRA_GPIO_PORTS]; + uint gpio_in[TEGRA_GPIO_PORTS]; + uint gpio_int_status[TEGRA_GPIO_PORTS]; + uint gpio_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_int_level[TEGRA_GPIO_PORTS]; + uint gpio_int_clear[TEGRA_GPIO_PORTS]; +}; + +struct gpio_ctlr { + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; +}; + +#define GPIO_BANK(x) ((x) >> 5) +#define GPIO_PORT(x) (((x) >> 3) & 0x3) +#define GPIO_BIT(x)((x) & 0x7) + +/* + * GPIO_PI3 = Port I = 8, bit = 3. + * Seaboard: used for UART/SPI selection + * Harmony: not used + */ +#define GPIO_PI3 ((8 << 3) | 3) + +#endif /* TEGRA2_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra2/tegra2.h index 7b0f5cc..742a75a 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra2.h +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h @@ -30,6 +30,7 @@ #define NV_PA_TMRUS_BASE 0x60005010 #define NV_PA_CLK_RST_BASE 0x60006000 #define NV_PA_FLOW_BASE0x60007000 +#define NV_PA_GPIO_BASE0x6000D000 #define NV_PA_EVP_BASE 0x6000F000 #define NV_PA_APB_MISC_BASE0x7000 #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) -- 1.7.4.3 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality
Hi Tom, Le 13/04/2011 22:07, Tom Warren a écrit : > Signed-off-by: Tom Warren > --- > arch/arm/include/asm/arch-tegra2/gpio.h | 59 > + > arch/arm/include/asm/arch-tegra2/tegra2.h |1 + > 2 files changed, 60 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h > > diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h > b/arch/arm/include/asm/arch-tegra2/gpio.h > new file mode 100644 > index 000..0fb8f0d > --- /dev/null > +++ b/arch/arm/include/asm/arch-tegra2/gpio.h > @@ -0,0 +1,59 @@ > +/* > + * Copyright (c) 2011, Google Inc. All rights reserved. > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +#ifndef _TEGRA2_GPIO_H_ > +#define _TEGRA2_GPIO_H_ > + > +/* > + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4 ports, > + * each with 8 GPIOs. > + */ > +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */ > +#define TEGRA_GPIO_BANKS 8 /* The number of banks */ > + > +/* GPIO Controller registers for a single bank */ > +struct gpio_ctlr_bank { > + uint gpio_config[TEGRA_GPIO_PORTS]; > + uint gpio_dir_out[TEGRA_GPIO_PORTS]; > + uint gpio_out[TEGRA_GPIO_PORTS]; > + uint gpio_in[TEGRA_GPIO_PORTS]; > + uint gpio_int_status[TEGRA_GPIO_PORTS]; > + uint gpio_int_enable[TEGRA_GPIO_PORTS]; > + uint gpio_int_level[TEGRA_GPIO_PORTS]; > + uint gpio_int_clear[TEGRA_GPIO_PORTS]; > +}; > + > +struct gpio_ctlr { > + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; > +}; > + > +#define GPIO_BANK(x) ((x)>> 5) > +#define GPIO_PORT(x) (((x)>> 3)& 0x3) > +#define GPIO_BIT(x) ((x)& 0x7) > + > +/* > + * GPIO_PI3 = Port I = 8, bit = 3. > + * Seaboard: used for UART/SPI selection > + * Harmony: not used > + */ > +#define GPIO_PI3 ((8<< 3) | 3) > + > +#endif /* TEGRA2_GPIO_H_ */ > diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h > b/arch/arm/include/asm/arch-tegra2/tegra2.h > index 7b0f5cc..742a75a 100644 > --- a/arch/arm/include/asm/arch-tegra2/tegra2.h > +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h > @@ -30,6 +30,7 @@ > #define NV_PA_TMRUS_BASE0x60005010 > #define NV_PA_CLK_RST_BASE 0x60006000 > #define NV_PA_FLOW_BASE 0x60007000 > +#define NV_PA_GPIO_BASE 0x6000D000 > #define NV_PA_EVP_BASE 0x6000F000 > #define NV_PA_APB_MISC_BASE 0x7000 > #define NV_PA_APB_UARTA_BASE(NV_PA_APB_MISC_BASE + 0x6000) These are header files only, and they do not even contain function-like macros, so where is the functionality exactly? Amicalement, -- Albert. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality
Albert, On Wed, Apr 13, 2011 at 1:14 PM, Albert ARIBAUD wrote: > Hi Tom, > > Le 13/04/2011 22:07, Tom Warren a écrit : >> >> Signed-off-by: Tom Warren >> --- >> arch/arm/include/asm/arch-tegra2/gpio.h | 59 >> + >> arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + >> 2 files changed, 60 insertions(+), 0 deletions(-) >> create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h >> >> diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h >> b/arch/arm/include/asm/arch-tegra2/gpio.h >> new file mode 100644 >> index 000..0fb8f0d >> --- /dev/null >> +++ b/arch/arm/include/asm/arch-tegra2/gpio.h >> @@ -0,0 +1,59 @@ >> +/* >> + * Copyright (c) 2011, Google Inc. All rights reserved. >> + * See file CREDITS for list of people who contributed to this >> + * project. >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of >> + * the License, or (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, >> + * MA 02111-1307 USA >> + */ >> + >> +#ifndef _TEGRA2_GPIO_H_ >> +#define _TEGRA2_GPIO_H_ >> + >> +/* >> + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4 >> ports, >> + * each with 8 GPIOs. >> + */ >> +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */ >> +#define TEGRA_GPIO_BANKS 8 /* The number of banks */ >> + >> +/* GPIO Controller registers for a single bank */ >> +struct gpio_ctlr_bank { >> + uint gpio_config[TEGRA_GPIO_PORTS]; >> + uint gpio_dir_out[TEGRA_GPIO_PORTS]; >> + uint gpio_out[TEGRA_GPIO_PORTS]; >> + uint gpio_in[TEGRA_GPIO_PORTS]; >> + uint gpio_int_status[TEGRA_GPIO_PORTS]; >> + uint gpio_int_enable[TEGRA_GPIO_PORTS]; >> + uint gpio_int_level[TEGRA_GPIO_PORTS]; >> + uint gpio_int_clear[TEGRA_GPIO_PORTS]; >> +}; >> + >> +struct gpio_ctlr { >> + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; >> +}; >> + >> +#define GPIO_BANK(x) ((x)>> 5) >> +#define GPIO_PORT(x) (((x)>> 3)& 0x3) >> +#define GPIO_BIT(x) ((x)& 0x7) >> + >> +/* >> + * GPIO_PI3 = Port I = 8, bit = 3. >> + * Seaboard: used for UART/SPI selection >> + * Harmony: not used >> + */ >> +#define GPIO_PI3 ((8<< 3) | 3) >> + >> +#endif /* TEGRA2_GPIO_H_ */ >> diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h >> b/arch/arm/include/asm/arch-tegra2/tegra2.h >> index 7b0f5cc..742a75a 100644 >> --- a/arch/arm/include/asm/arch-tegra2/tegra2.h >> +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h >> @@ -30,6 +30,7 @@ >> #define NV_PA_TMRUS_BASE 0x60005010 >> #define NV_PA_CLK_RST_BASE 0x60006000 >> #define NV_PA_FLOW_BASE 0x60007000 >> +#define NV_PA_GPIO_BASE 0x6000D000 >> #define NV_PA_EVP_BASE 0x6000F000 >> #define NV_PA_APB_MISC_BASE 0x7000 >> #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) > > These are header files only, and they do not even contain function-like > macros, so where is the functionality exactly? In the next patch (3/3) - the macros are used in seaboard.c to drive the UART_DISABLE GPIO low to enable the UART in U-Boot POST. > > Amicalement, > -- > Albert. > Tom ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality
Tom, Le 13/04/2011 22:26, Tom Warren a écrit : > Albert, > > On Wed, Apr 13, 2011 at 1:14 PM, Albert ARIBAUD > wrote: >> Hi Tom, >> >> Le 13/04/2011 22:07, Tom Warren a écrit : >>> >>> Signed-off-by: Tom Warren >>> --- >>> arch/arm/include/asm/arch-tegra2/gpio.h | 59 >>> + >>> arch/arm/include/asm/arch-tegra2/tegra2.h |1 + >>> 2 files changed, 60 insertions(+), 0 deletions(-) >>> create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h >>> >>> diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h >>> b/arch/arm/include/asm/arch-tegra2/gpio.h >>> new file mode 100644 >>> index 000..0fb8f0d >>> --- /dev/null >>> +++ b/arch/arm/include/asm/arch-tegra2/gpio.h >>> @@ -0,0 +1,59 @@ >>> +/* >>> + * Copyright (c) 2011, Google Inc. All rights reserved. >>> + * See file CREDITS for list of people who contributed to this >>> + * project. >>> + * >>> + * This program is free software; you can redistribute it and/or >>> + * modify it under the terms of the GNU General Public License as >>> + * published by the Free Software Foundation; either version 2 of >>> + * the License, or (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + * >>> + * You should have received a copy of the GNU General Public License >>> + * along with this program; if not, write to the Free Software >>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, >>> + * MA 02111-1307 USA >>> + */ >>> + >>> +#ifndef _TEGRA2_GPIO_H_ >>> +#define _TEGRA2_GPIO_H_ >>> + >>> +/* >>> + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4 >>> ports, >>> + * each with 8 GPIOs. >>> + */ >>> +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */ >>> +#define TEGRA_GPIO_BANKS 8 /* The number of banks */ >>> + >>> +/* GPIO Controller registers for a single bank */ >>> +struct gpio_ctlr_bank { >>> + uint gpio_config[TEGRA_GPIO_PORTS]; >>> + uint gpio_dir_out[TEGRA_GPIO_PORTS]; >>> + uint gpio_out[TEGRA_GPIO_PORTS]; >>> + uint gpio_in[TEGRA_GPIO_PORTS]; >>> + uint gpio_int_status[TEGRA_GPIO_PORTS]; >>> + uint gpio_int_enable[TEGRA_GPIO_PORTS]; >>> + uint gpio_int_level[TEGRA_GPIO_PORTS]; >>> + uint gpio_int_clear[TEGRA_GPIO_PORTS]; >>> +}; >>> + >>> +struct gpio_ctlr { >>> + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; >>> +}; >>> + >>> +#define GPIO_BANK(x) ((x)>>5) >>> +#define GPIO_PORT(x) (((x)>>3)&0x3) >>> +#define GPIO_BIT(x)((x)&0x7) >>> + >>> +/* >>> + * GPIO_PI3 = Port I = 8, bit = 3. >>> + * Seaboard: used for UART/SPI selection >>> + * Harmony: not used >>> + */ >>> +#define GPIO_PI3 ((8<<3) | 3) >>> + >>> +#endif /* TEGRA2_GPIO_H_ */ >>> diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h >>> b/arch/arm/include/asm/arch-tegra2/tegra2.h >>> index 7b0f5cc..742a75a 100644 >>> --- a/arch/arm/include/asm/arch-tegra2/tegra2.h >>> +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h >>> @@ -30,6 +30,7 @@ >>> #define NV_PA_TMRUS_BASE 0x60005010 >>> #define NV_PA_CLK_RST_BASE0x60006000 >>> #define NV_PA_FLOW_BASE 0x60007000 >>> +#define NV_PA_GPIO_BASE0x6000D000 >>> #define NV_PA_EVP_BASE0x6000F000 >>> #define NV_PA_APB_MISC_BASE 0x7000 >>> #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) >> >> These are header files only, and they do not even contain function-like >> macros, so where is the functionality exactly? > In the next patch (3/3) - the macros are used in seaboard.c to drive > the UART_DISABLE GPIO low to enable the UART in U-Boot POST. Could you just rename the patch "Add basic GPIO definitions" then? Amicalement, -- Albert. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] arm: Tegra2: GPIO: Add basic GPIO functionality
Albert, On Wed, Apr 13, 2011 at 1:31 PM, Albert ARIBAUD wrote: > Tom, > > Le 13/04/2011 22:26, Tom Warren a écrit : >> >> Albert, >> >> On Wed, Apr 13, 2011 at 1:14 PM, Albert ARIBAUD >> wrote: >>> >>> Hi Tom, >>> >>> Le 13/04/2011 22:07, Tom Warren a écrit : Signed-off-by: Tom Warren --- arch/arm/include/asm/arch-tegra2/gpio.h | 59 + arch/arm/include/asm/arch-tegra2/tegra2.h | 1 + 2 files changed, 60 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-tegra2/gpio.h diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h b/arch/arm/include/asm/arch-tegra2/gpio.h new file mode 100644 index 000..0fb8f0d --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/gpio.h @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2011, Google Inc. All rights reserved. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA2_GPIO_H_ +#define _TEGRA2_GPIO_H_ + +/* + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4 ports, + * each with 8 GPIOs. + */ +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */ +#define TEGRA_GPIO_BANKS 8 /* The number of banks */ + +/* GPIO Controller registers for a single bank */ +struct gpio_ctlr_bank { + uint gpio_config[TEGRA_GPIO_PORTS]; + uint gpio_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_out[TEGRA_GPIO_PORTS]; + uint gpio_in[TEGRA_GPIO_PORTS]; + uint gpio_int_status[TEGRA_GPIO_PORTS]; + uint gpio_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_int_level[TEGRA_GPIO_PORTS]; + uint gpio_int_clear[TEGRA_GPIO_PORTS]; +}; + +struct gpio_ctlr { + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; +}; + +#define GPIO_BANK(x) ((x)>> 5) +#define GPIO_PORT(x) (((x)>> 3)& 0x3) +#define GPIO_BIT(x) ((x)& 0x7) + +/* + * GPIO_PI3 = Port I = 8, bit = 3. + * Seaboard: used for UART/SPI selection + * Harmony: not used + */ +#define GPIO_PI3 ((8<< 3) | 3) + +#endif /* TEGRA2_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra2/tegra2.h index 7b0f5cc..742a75a 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra2.h +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h @@ -30,6 +30,7 @@ #define NV_PA_TMRUS_BASE 0x60005010 #define NV_PA_CLK_RST_BASE 0x60006000 #define NV_PA_FLOW_BASE 0x60007000 +#define NV_PA_GPIO_BASE 0x6000D000 #define NV_PA_EVP_BASE 0x6000F000 #define NV_PA_APB_MISC_BASE 0x7000 #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) >>> >>> These are header files only, and they do not even contain function-like >>> macros, so where is the functionality exactly? >> >> In the next patch (3/3) - the macros are used in seaboard.c to drive >> the UART_DISABLE GPIO low to enable the UART in U-Boot POST. > > Could you just rename the patch "Add basic GPIO definitions" then? Sure, no problem. Thanks. > > Amicalement, > -- > Albert. > ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot