AM43xx Starter Kit is a new board based on
AM437x line of SoCs. Being a low-cost EVM and
small size EVM are intended to provide an entry
level development platform on a full fledged
Hardware System.
Signed-off-by: Felipe Balbi <ba...@ti.com>
---
board/ti/am43xx/board.c | 7 +++++--
board/ti/am43xx/board.h | 5 +++++
include/configs/am43xx_evm.h | 2 ++
3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 24097b0..05546ac 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -244,7 +244,7 @@ void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32
*size)
if (board_is_eposevm()) {
*regs = ext_phy_ctrl_const_base_lpddr2;
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
- } else if (board_is_gpevm()) {
+ } else if (board_is_gpevm() || board_is_sk()) {
*regs = ext_phy_ctrl_const_base_ddr3;
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
}
@@ -263,7 +263,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
if (board_is_eposevm())
return &epos_evm_dpll_ddr;
- else if (board_is_gpevm())
+ else if (board_is_gpevm() || board_is_sk())
return &gp_evm_dpll_ddr;
printf(" Board '%s' not supported\n", am43xx_board_name);
@@ -373,6 +373,9 @@ void sdram_init(void)
enable_vtt_regulator();
config_ddr(0, &ioregs_ddr3, NULL, NULL,
&ddr3_emif_regs_400Mhz, 0);
+ } else if (board_is_sk()) {
+ config_ddr(0, &ioregs_ddr3, NULL, NULL,
+ &ddr3_emif_regs_400Mhz, 0);
}
}
#endif
diff --git a/board/ti/am43xx/board.h b/board/ti/am43xx/board.h
index 091162e..017047d 100644
--- a/board/ti/am43xx/board.h
+++ b/board/ti/am43xx/board.h
@@ -47,6 +47,11 @@ static inline int board_is_gpevm(void)
return !strncmp(am43xx_board_name, "AM43__GP", HDR_NAME_LEN);
}
+static inline int board_is_sk(void)
+{
+ return !strncmp(am43xx_board_name, "AM43__SK", HDR_NAME_LEN);
+}
+
void enable_uart0_pin_mux(void);
void enable_board_pin_mux(void);
void enable_i2c0_pin_mux(void);
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 614857d..d7866ff 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -196,6 +196,8 @@
"setenv fdtfile am43x-epos-evm.dtb; fi; " \
"if test $board_name = AM43__GP; then " \
"setenv fdtfile am437x-gp-evm.dtb; fi; " \
+ "if test $board_name = AM43__SK; then " \
+ "setenv fdtfile am437x-sk-evm.dtb; fi; " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree; fi; \0"
--
2.0.0.rc1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
