Re: [U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
Dear Matthias, On Thu, 22 Apr 2010 12:30:56 +0200 Matthias Weisser weiss...@arcor.de wrote: ... diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index d1f47c9..4769cdb 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -153,6 +153,14 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the #endif /*/ +/* Defines for the MB86R0xGDC driver */ +/*/ +#ifdef CONFIG_VIDEO_MB86R0xGDC + +#define VIDEO_FB_16BPP_WORD_SWAP +#endif Please do not add VIDEO_FB_16BPP_WORD_SWAP #define here. Add it into your include/configs/jadecpu.h file in the video related section like other boards do. Thanks! Best regards, Anatolij ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
Dear Matthias,
On Thu, 22 Apr 2010 15:03:55 +0200
Matthias Weißer weiss...@arcor.de wrote:
...
+/*
+ * Set a RGB color in the LUT
+ */
+void video_set_lut(unsigned int index, unsigned char r,
+ unsigned char g, unsigned char b)
+{
+
+}
Code seems to be missing?
The driver doesn't support palletized color format at the moment but
removing this function leads to a linker error.
Maybe we should add a config option to disable palletized color format
or add a weak function somewhere. Maybe Anatolij can comment on this
issue also.
I will send a patch adding weak default video_set_lut() to cfb_console
driver. You can remove empty function then.
Best regards,
Anatolij
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
Am 22.04.2010 14:41, schrieb Wolfgang Denk: Dear Matthias Weisser, In message1271932257-14618-3-git-send-email-weiss...@arcor.de you wrote: This patch adds support for the display controller in the MB86R0x SoCs. Signed-off-by: Matthias Weisserweiss...@arcor.de ... +pGD-memSize = VIDEO_MEM_SIZE; +pGD-frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE; Please pay attention to the global memory map requirements. PRAM might go first. Can you please explain this a bit more in detail? I checked the source and README for CONFIG_PRAM and it seems to be reserving some space at the end of RAM. But I have only found reference to it in ppc and m68k code. What would be the correct way to reserve some 2MB-4MB at the end of system RAM as a framebuffer for the integrated graphics device? Thanks in advance Matthias ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
Dear Matthias, in message 4bd7d5dd.6080...@arcor.de you wrote: + pGD-memSize = VIDEO_MEM_SIZE; + pGD-frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE; Please pay attention to the global memory map requirements. PRAM might go first. Can you please explain this a bit more in detail? I checked the source and README for CONFIG_PRAM and it seems to be reserving some space at the end of RAM. But I have only found reference to it in ppc and m68k code. Right. But there is a chance that the ARM implementation might be reworked soon, and then it will follow the documented approach as well, so better start correctly from the beginning so you don;t run into conflicts soon. What would be the correct way to reserve some 2MB-4MB at the end of system RAM as a framebuffer for the integrated graphics device? See the PPC implementation for reference. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Shakespeare's Law of Prototyping: (Hamlet III, iv, 156-160) O, throw away the worser part of it, And live the purer with the other half. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
Am 28.04.2010 08:44, schrieb Wolfgang Denk: Dear Matthias, in message4bd7d5dd.6080...@arcor.de you wrote: + pGD-memSize = VIDEO_MEM_SIZE; + pGD-frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE; Please pay attention to the global memory map requirements. PRAM might go first. Can you please explain this a bit more in detail? I checked the source and README for CONFIG_PRAM and it seems to be reserving some space at the end of RAM. But I have only found reference to it in ppc and m68k code. Right. But there is a chance that the ARM implementation might be reworked soon, and then it will follow the documented approach as well, so better start correctly from the beginning so you don;t run into conflicts soon. I totally agree with you, but... What would be the correct way to reserve some 2MB-4MB at the end of system RAM as a framebuffer for the integrated graphics device? See the PPC implementation for reference. I had a look into the PPC code and its clear to me how it is done there. But I currently do not see how this can be done on ARM without a couple of changes to arch/arm/lib/board.c Another question regarding the video driver: I have seen some video drivers in driver/video/... and some are in arch/.../cpu/... What would be the right place for mine? As it is integrated into the SoC I tend to put it in arch/arm/cpu/arm/arm926ejs/mb86r0x and not into drivers/video. On the other hand there is a imx31 related video driver in drivers/video. Thanks for you patience Matthias ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
This patch adds support for the display controller in
the MB86R0x SoCs.
Signed-off-by: Matthias Weisser weiss...@arcor.de
---
drivers/video/Makefile |1 +
drivers/video/cfb_console.c |8 ++
drivers/video/mb86r0xgdc.c | 194 +++
3 files changed, 203 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/mb86r0xgdc.c
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index a5e339a..1a60ec6 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -32,6 +32,7 @@ COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o
+COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o
COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_SED156X) += sed156x.o
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index d1f47c9..4769cdb 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -153,6 +153,14 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor
capability of the
#endif
/*/
+/* Defines for the MB86R0xGDC driver*/
+/*/
+#ifdef CONFIG_VIDEO_MB86R0xGDC
+
+#define VIDEO_FB_16BPP_WORD_SWAP
+#endif
+
+/*/
/* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc*/
/*/
#include video_fb.h
diff --git a/drivers/video/mb86r0xgdc.c b/drivers/video/mb86r0xgdc.c
new file mode 100644
index 000..9022730
--- /dev/null
+++ b/drivers/video/mb86r0xgdc.c
@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser weiss...@arcor.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mb86r0x.c - Graphic interface for Fujitsu MB86R0x integrated graphic
+ * controller. Derived from mb862xx.c
+ */
+
+#include common.h
+
+#include malloc.h
+#include mb862xx.h
+#include asm/io.h
+#include asm/arch/hardware.h
+#include video_fb.h
+#include videomodes.h
+
+/*
+ * 4MB (at the end of system RAM)
+ */
+#define VIDEO_MEM_SIZE 0x40
+
+/*
+ * Graphic Device
+ */
+static GraphicDevice mb86r0x;
+
+void *video_hw_init(void)
+{
+ GraphicDevice *pGD = mb86r0x;
+ struct ctfb_res_modes var_mode[2];
+ unsigned long *vid;
+ unsigned long div;
+ unsigned long dspBase[2];
+ char *penv;
+ int bpp;
+ int i, j;
+
+ memset(pGD, 0, sizeof(GraphicDevice));
+
+ dspBase[0] = MB86R0x_GDC_DISP0_PHYS_BASE;
+ dspBase[1] = MB86R0x_GDC_DISP1_PHYS_BASE;
+
+ pGD-frameAdrs = MB86R0x_GDC_PHYS_BASE;
+ pGD-gdfIndex = GDF_15BIT_555RGB;
+ pGD-gdfBytesPP = 2;
+
+ pGD-memSize = VIDEO_MEM_SIZE;
+ pGD-frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
+ vid = (unsigned long *)pGD-frameAdrs;
+
+ for (i = 0; i 2; i++) {
+ char varName[32];
+ u32 dcm1, dcm2, dcm3;
+ u16 htp, hdp, hdb, hsp, vtr, vsp, vdp;
+ u8 hsw, vsw;
+ u32 l2m, l2em, l2oa0, l2da0, l2oa1, l2da1;
+ u16 l2dx, l2dy, l2wx, l2wy, l2ww, l2wh;
+
+ sprintf(varName, gs_dsp_%d_param, i);
+
+ penv = getenv(varName);
+ if (penv == NULL) {
+ penv = getenv(videomode);
+ if ((i == 1) || (penv == NULL))
+ continue;
+ }
+
+ bpp = 0;
+ bpp = video_get_params(var_mode[i], penv);
+
+ if (bpp == 0) {
+ var_mode[i].xres = 640;
+ var_mode[i].yres = 480;
+ var_mode[i].pixclock = 39721; /* 25MHz */
+ var_mode[i].left_margin = 48;
+ var_mode[i].right_margin = 16;
+ var_mode[i].upper_margin = 33;
+
Re: [U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
Dear Matthias Weisser,
In message 1271932257-14618-3-git-send-email-weiss...@arcor.de you wrote:
This patch adds support for the display controller in
the MB86R0x SoCs.
Signed-off-by: Matthias Weisser weiss...@arcor.de
...
+ pGD-memSize = VIDEO_MEM_SIZE;
+ pGD-frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
Please pay attention to the global memory map requirements. PRAM might
go first.
+ writel(dcm1, dspBase[i] + GC_DCM1);
+ writel(dcm2, dspBase[i] + GC_DCM2);
+ writel(dcm3, dspBase[i] + GC_DCM3);
+
+ writew(htp, dspBase[i] + GC_HTP);
+ writew(hdp, dspBase[i] + GC_HDP);
+ writew(hdb, dspBase[i] + GC_HDB);
+ writew(hsp, dspBase[i] + GC_HSP);
+ writeb(hsw, dspBase[i] + GC_HSW);
+
+ writeb(vsw, dspBase[i] + GC_VSW);
+ writew(vtr, dspBase[i] + GC_VTR);
+ writew(vsp, dspBase[i] + GC_VSP);
+ writew(vdp, dspBase[i] + GC_VDP);
+
+ writel(l2m, dspBase[i] + GC_L2M);
+ writel(l2em, dspBase[i] + GC_L2EM);
+ writel(l2oa0, dspBase[i] + GC_L2OA0);
+ writel(l2da0, dspBase[i] + GC_L2DA0);
+ writel(l2oa1, dspBase[i] + GC_L2OA1);
+ writel(l2da1, dspBase[i] + GC_L2DA1);
+ writew(l2dx, dspBase[i] + GC_L2DX);
+ writew(l2dy, dspBase[i] + GC_L2DY);
+ writew(l2wx, dspBase[i] + GC_L2WX);
+ writew(l2wy, dspBase[i] + GC_L2WY);
+ writew(l2ww, dspBase[i] + GC_L2WW);
+ writew(l2wh, dspBase[i] + GC_L2WH);
+
+ writel(dcm1 | (1 18) | (1 31), dspBase[i] + GC_DCM1);
Please use a C struct instead.
+/*
+ * Set a RGB color in the LUT
+ */
+void video_set_lut(unsigned int index, unsigned char r,
+ unsigned char g, unsigned char b)
+{
+
+}
Code seems to be missing?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
The more we disagree, the more chance there is that at least one of
us is right.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 2/3] video: add support for display controller in MB86R0x SoCs
Am 22.04.2010 14:41, schrieb Wolfgang Denk:
Dear Matthias Weisser,
In message1271932257-14618-3-git-send-email-weiss...@arcor.de you wrote:
This patch adds support for the display controller in
the MB86R0x SoCs.
Signed-off-by: Matthias Weisserweiss...@arcor.de
...
+pGD-memSize = VIDEO_MEM_SIZE;
+pGD-frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
Please pay attention to the global memory map requirements. PRAM might
go first.
+writel(dcm1, dspBase[i] + GC_DCM1);
+writel(dcm2, dspBase[i] + GC_DCM2);
+writel(dcm3, dspBase[i] + GC_DCM3);
+
+writew(htp, dspBase[i] + GC_HTP);
+writew(hdp, dspBase[i] + GC_HDP);
+writew(hdb, dspBase[i] + GC_HDB);
+writew(hsp, dspBase[i] + GC_HSP);
+writeb(hsw, dspBase[i] + GC_HSW);
+
+writeb(vsw, dspBase[i] + GC_VSW);
+writew(vtr, dspBase[i] + GC_VTR);
+writew(vsp, dspBase[i] + GC_VSP);
+writew(vdp, dspBase[i] + GC_VDP);
+
+writel(l2m, dspBase[i] + GC_L2M);
+writel(l2em, dspBase[i] + GC_L2EM);
+writel(l2oa0, dspBase[i] + GC_L2OA0);
+writel(l2da0, dspBase[i] + GC_L2DA0);
+writel(l2oa1, dspBase[i] + GC_L2OA1);
+writel(l2da1, dspBase[i] + GC_L2DA1);
+writew(l2dx, dspBase[i] + GC_L2DX);
+writew(l2dy, dspBase[i] + GC_L2DY);
+writew(l2wx, dspBase[i] + GC_L2WX);
+writew(l2wy, dspBase[i] + GC_L2WY);
+writew(l2ww, dspBase[i] + GC_L2WW);
+writew(l2wh, dspBase[i] + GC_L2WH);
+
+writel(dcm1 | (1 18) | (1 31), dspBase[i] + GC_DCM1);
Please use a C struct instead.
This driver is mainly copied from mb862xx (sharing the header as offsets
are the same) and that was the approach used there. I will add the
structures and use them.
+/*
+ * Set a RGB color in the LUT
+ */
+void video_set_lut(unsigned int index, unsigned char r,
+unsigned char g, unsigned char b)
+{
+
+}
Code seems to be missing?
The driver doesn't support palletized color format at the moment but
removing this function leads to a linker error.
Maybe we should add a config option to disable palletized color format
or add a weak function somewhere. Maybe Anatolij can comment on this
issue also.
Regards,
Matthias
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
