Re: [U-Boot] [PATCH 3/3] MMC: atmel_mci: enable high speed mode support
Hi Bo, On Jul 31, 2014, at 9:39 AM, Bo Shen wrote: If the MCI IP version = 0x300, it supports hight speed mode option, this patch enable it. Signed-off-by: Bo Shen voice.s...@atmel.com --- drivers/mmc/gen_atmel_mci.c | 7 ++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 8778a4d..45bcffb 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -110,6 +110,9 @@ static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) if (version = 0x200) writel(MMCI_BF(BLKLEN, blklen), mci-blkr); + if (mmc-card_caps mmc-cfg-host_caps MMC_MODE_HS) + writel(MMCI_BIT(HSMODE), mci-cfg); + initialized = 1; } @@ -404,8 +407,10 @@ int atmel_mci_init(void *regs) /* need to be able to pass these in on a board by board basis */ cfg-voltages = MMC_VDD_32_33 | MMC_VDD_33_34; version = atmel_mci_get_version(mci); - if ((version 0xf00) = 0x300) + if ((version 0xf00) = 0x300) { cfg-host_caps = MMC_MODE_8BIT; + cfg-host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; + } cfg-host_caps |= MMC_MODE_4BIT; -- 1.8.5.2 Applied, thanks. -- Pantelis ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH 3/3] MMC: atmel_mci: enable high speed mode support
If the MCI IP version = 0x300, it supports hight speed mode option, this patch enable it. Signed-off-by: Bo Shen voice.s...@atmel.com --- drivers/mmc/gen_atmel_mci.c | 7 ++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 8778a4d..45bcffb 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -110,6 +110,9 @@ static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) if (version = 0x200) writel(MMCI_BF(BLKLEN, blklen), mci-blkr); + if (mmc-card_caps mmc-cfg-host_caps MMC_MODE_HS) + writel(MMCI_BIT(HSMODE), mci-cfg); + initialized = 1; } @@ -404,8 +407,10 @@ int atmel_mci_init(void *regs) /* need to be able to pass these in on a board by board basis */ cfg-voltages = MMC_VDD_32_33 | MMC_VDD_33_34; version = atmel_mci_get_version(mci); - if ((version 0xf00) = 0x300) + if ((version 0xf00) = 0x300) { cfg-host_caps = MMC_MODE_8BIT; + cfg-host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; + } cfg-host_caps |= MMC_MODE_4BIT; -- 1.8.5.2 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot