[U-Boot] [PATCH 7/8] powerpc/85xx: do not initialize QE if QE's firmware is in nand flash
From: Haiying Wang haiying.w...@freescale.com For some board which doesn't have NOR flash and the QE's firmware(ucode) is saved in its NAND flash, we don't want call qe_init in cpu_init_r, but will call it later after nand is initialized. Signed-off-by: Haiying Wang haiying.w...@freescale.com --- arch/powerpc/cpu/mpc85xx/cpu_init.c |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 4b8faa5..eb34378 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -369,7 +369,7 @@ int cpu_init_r(void) enable_cpc(); -#ifdef CONFIG_QE +#if defined(CONFIG_QE) !defined(CONFIG_SYS_QE_FW_IN_NAND) uint qe_base = CONFIG_SYS_IMMR + 0x0008; /* QE immr base */ qe_init(qe_base); qe_reset(); -- 1.7.3.1.50.g1e633 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 7/8] powerpc/85xx: do not initialize QE if QE's firmware is in nand flash
On Dec 1, 2010, at 9:50 AM, haiying.w...@freescale.com haiying.w...@freescale.com wrote: From: Haiying Wang haiying.w...@freescale.com For some board which doesn't have NOR flash and the QE's firmware(ucode) is saved in its NAND flash, we don't want call qe_init in cpu_init_r, but will call it later after nand is initialized. Signed-off-by: Haiying Wang haiying.w...@freescale.com --- arch/powerpc/cpu/mpc85xx/cpu_init.c |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 4b8faa5..eb34378 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -369,7 +369,7 @@ int cpu_init_r(void) enable_cpc(); -#ifdef CONFIG_QE +#if defined(CONFIG_QE) !defined(CONFIG_SYS_QE_FW_IN_NAND) uint qe_base = CONFIG_SYS_IMMR + 0x0008; /* QE immr base */ qe_init(qe_base); qe_reset(); -- 1.7.3.1.50.g1e633 Any reason to just not move QE init for everyone? - k ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 7/8] powerpc/85xx: do not initialize QE if QE's firmware is in nand flash
On Wed, 2010-12-01 at 08:56 -0700, Kumar Gala wrote: diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 4b8faa5..eb34378 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -369,7 +369,7 @@ int cpu_init_r(void) enable_cpc(); -#ifdef CONFIG_QE +#if defined(CONFIG_QE) !defined(CONFIG_SYS_QE_FW_IN_NAND) uint qe_base = CONFIG_SYS_IMMR + 0x0008; /* QE immr base */ qe_init(qe_base); qe_reset(); -- 1.7.3.1.50.g1e633 Any reason to just not move QE init for everyone? That was based on Wolfgang's comment: http://lists.denx.de/pipermail/u-boot/2010-August/075657.html Haiying ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 7/8] powerpc/85xx: do not initialize QE if QE's firmware is in nand flash
On Dec 1, 2010, at 10:06 AM, Haiying Wang wrote: On Wed, 2010-12-01 at 08:56 -0700, Kumar Gala wrote: diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 4b8faa5..eb34378 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -369,7 +369,7 @@ int cpu_init_r(void) enable_cpc(); -#ifdef CONFIG_QE +#if defined(CONFIG_QE) !defined(CONFIG_SYS_QE_FW_IN_NAND) uint qe_base = CONFIG_SYS_IMMR + 0x0008; /* QE immr base */ qe_init(qe_base); qe_reset(); -- 1.7.3.1.50.g1e633 Any reason to just not move QE init for everyone? That was based on Wolfgang's comment: http://lists.denx.de/pipermail/u-boot/2010-August/075657.html Haiying I think wolfgang's gripe is about putting the code into generic board_init_r(). I think we could move it so its in misc_init_r. - k ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH 7/8] powerpc/85xx: do not initialize QE if QE's firmware is in nand flash
On Wed, 2010-12-01 at 11:50 -0700, Kumar Gala wrote: Any reason to just not move QE init for everyone? That was based on Wolfgang's comment: http://lists.denx.de/pipermail/u-boot/2010-August/075657.html Haiying I think wolfgang's gripe is about putting the code into generic board_init_r(). I think we could move it so its in misc_init_r. So we should move qe_init out from cpu_init_r, and to a misc_init_r? should misc_init_r be defined also in 83xx/85xx's cpu_init.c file? You may see my 8/8 patch in which I defined misc_init_r for P1021 in it's board c file. I just did not want to touch the existing qe_init routines for 83xx/85xx. Haiying ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
