Re: [U-Boot] [PATCH v2] net: phy: marvell: Add functions to read PHY's extended registers
On 10/30/2017 03:34 AM, Lukasz Majewski wrote: > Hi York, > >> On 10/27/2017 08:23 AM, Lukasz Majewski wrote: >>> On Fri, 27 Oct 2017 15:06:37 + >>> York Sun wrote: >>> On 10/27/2017 02:12 AM, Lukasz Majewski wrote: > This commit allows extended Marvell registers to be read with: > > foo > mdio rx FEC 3.10 > Reading from bus FEC > PHY at address 0: > 3.16 - 0x1063 > foo > mdio wx FEC 3.10 0x1011 > > The above code changes the way ETH connector LEDs blink. > > Signed-off-by: Lukasz Majewski > > --- > > Changes in v2: > - Provide the readext and writeext callbacks to other marvell ETH > PHY devices > > drivers/net/phy/marvell.c | 47 > +++ 1 file changed, 47 > insertions(+) > > diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c > index b7f300e..19f451d 100644 > --- a/drivers/net/phy/marvell.c > +++ b/drivers/net/phy/marvell.c > @@ -104,6 +104,31 @@ > #define MIIM_88E151x_MODE_SGMII 1 > #define MIIM_88E151x_RESET_OFFS 15 > > +static int m88e1xxx_phy_extread(struct phy_device *phydev, int > addr, > + int devaddr, int regnum) > +{ > + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, > MII_MARVELL_PHY_PAGE); > + int val; > + > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > devaddr); >> >> For register 30 and 31, the page register is 29, not 22. > > Yes, for 88E1145 and 88E1149 the page register is 29, not 22 (as it is > in majority of devices from marvell.c file in u-boot). > > It seems like the most practical approach would be as presented in > patch v1 - just enable this code on PHY which I can test. > > If you find other devices (boards) and test the code, then we can add > it as well. > OK. Thanks for trying. York ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] net: phy: marvell: Add functions to read PHY's extended registers
Hi York, > On 10/27/2017 08:23 AM, Lukasz Majewski wrote: > > On Fri, 27 Oct 2017 15:06:37 + > > York Sun wrote: > > > >> On 10/27/2017 02:12 AM, Lukasz Majewski wrote: > >>> This commit allows extended Marvell registers to be read with: > >>> > >>> foo > mdio rx FEC 3.10 > >>> Reading from bus FEC > >>> PHY at address 0: > >>> 3.16 - 0x1063 > >>> foo > mdio wx FEC 3.10 0x1011 > >>> > >>> The above code changes the way ETH connector LEDs blink. > >>> > >>> Signed-off-by: Lukasz Majewski > >>> > >>> --- > >>> > >>> Changes in v2: > >>> - Provide the readext and writeext callbacks to other marvell ETH > >>> PHY devices > >>> > >>> drivers/net/phy/marvell.c | 47 > >>> +++ 1 file changed, 47 > >>> insertions(+) > >>> > >>> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c > >>> index b7f300e..19f451d 100644 > >>> --- a/drivers/net/phy/marvell.c > >>> +++ b/drivers/net/phy/marvell.c > >>> @@ -104,6 +104,31 @@ > >>> #define MIIM_88E151x_MODE_SGMII 1 > >>> #define MIIM_88E151x_RESET_OFFS 15 > >>> > >>> +static int m88e1xxx_phy_extread(struct phy_device *phydev, int > >>> addr, > >>> + int devaddr, int regnum) > >>> +{ > >>> + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, > >>> MII_MARVELL_PHY_PAGE); > >>> + int val; > >>> + > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> devaddr); > > For register 30 and 31, the page register is 29, not 22. Yes, for 88E1145 and 88E1149 the page register is 29, not 22 (as it is in majority of devices from marvell.c file in u-boot). It seems like the most practical approach would be as presented in patch v1 - just enable this code on PHY which I can test. If you find other devices (boards) and test the code, then we can add it as well. > >>> + val = phy_read(phydev, MDIO_DEVAD_NONE, regnum); > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> oldpage); + > >>> + return val; > >>> +} > >>> + > >>> +static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int > >>> addr, > >>> + int devaddr, int regnum, u16 > >>> val) +{ > >>> + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, > >>> MII_MARVELL_PHY_PAGE); + > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> devaddr); > >>> + phy_write(phydev, MDIO_DEVAD_NONE, regnum, val); > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> oldpage); + > >>> + return 0; > >>> +} > >>> + > >>> /* Marvell 88E1011S */ > >>> static int m88e1011s_config(struct phy_device *phydev) > >>> { > >>> @@ -599,6 +624,8 @@ static struct phy_driver M88E1011S_driver = { > >>> .config = &m88e1011s_config, > >>> .startup = &m88e1011s_startup, > >>> .shutdown = &genphy_shutdown, > >>> + .readext = &m88e1xxx_phy_extread, > >>> + .writeext = &m88e1xxx_phy_extwrite, > >>> }; > >>> > >> > >> Lukasz, > >> > >> This seems wrong. 88E1011S doesn't have the page register. > > > > Ok. I will remove this one from v3. > > > >> I can only > >> confirm 88E and 88E1145 have pages. > > > > I do know that it works on 88E151x > > > > The 88E1318 and 88E1618 seems to be unknown. > > > >> I don't have other part's > >> datasheet to check. > > > > I suggest only to enable the parts you can confirm on hardware, > datasheet, or from the source code (where the page register is used). > > York Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de pgp1xnE6icddp.pgp Description: OpenPGP digital signature ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] net: phy: marvell: Add functions to read PHY's extended registers
Hi York, > On 10/27/2017 08:23 AM, Lukasz Majewski wrote: > > On Fri, 27 Oct 2017 15:06:37 + > > York Sun wrote: > > > >> On 10/27/2017 02:12 AM, Lukasz Majewski wrote: > >>> This commit allows extended Marvell registers to be read with: > >>> > >>> foo > mdio rx FEC 3.10 > >>> Reading from bus FEC > >>> PHY at address 0: > >>> 3.16 - 0x1063 > >>> foo > mdio wx FEC 3.10 0x1011 > >>> > >>> The above code changes the way ETH connector LEDs blink. > >>> > >>> Signed-off-by: Lukasz Majewski > >>> > >>> --- > >>> > >>> Changes in v2: > >>> - Provide the readext and writeext callbacks to other marvell ETH > >>> PHY devices > >>> > >>> drivers/net/phy/marvell.c | 47 > >>> +++ 1 file changed, 47 > >>> insertions(+) > >>> > >>> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c > >>> index b7f300e..19f451d 100644 > >>> --- a/drivers/net/phy/marvell.c > >>> +++ b/drivers/net/phy/marvell.c > >>> @@ -104,6 +104,31 @@ > >>> #define MIIM_88E151x_MODE_SGMII 1 > >>> #define MIIM_88E151x_RESET_OFFS 15 > >>> > >>> +static int m88e1xxx_phy_extread(struct phy_device *phydev, int > >>> addr, > >>> + int devaddr, int regnum) > >>> +{ > >>> + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, > >>> MII_MARVELL_PHY_PAGE); > >>> + int val; > >>> + > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> devaddr); > > For register 30 and 31, the page register is 29, not 22. > > >>> + val = phy_read(phydev, MDIO_DEVAD_NONE, regnum); > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> oldpage); + > >>> + return val; > >>> +} > >>> + > >>> +static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int > >>> addr, > >>> + int devaddr, int regnum, u16 > >>> val) +{ > >>> + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, > >>> MII_MARVELL_PHY_PAGE); + > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> devaddr); > >>> + phy_write(phydev, MDIO_DEVAD_NONE, regnum, val); > >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > >>> oldpage); + > >>> + return 0; > >>> +} > >>> + > >>> /* Marvell 88E1011S */ > >>> static int m88e1011s_config(struct phy_device *phydev) > >>> { > >>> @@ -599,6 +624,8 @@ static struct phy_driver M88E1011S_driver = { > >>> .config = &m88e1011s_config, > >>> .startup = &m88e1011s_startup, > >>> .shutdown = &genphy_shutdown, > >>> + .readext = &m88e1xxx_phy_extread, > >>> + .writeext = &m88e1xxx_phy_extwrite, > >>> }; > >>> > >> > >> Lukasz, > >> > >> This seems wrong. 88E1011S doesn't have the page register. > > > > Ok. I will remove this one from v3. > > > >> I can only > >> confirm 88E and 88E1145 have pages. > > > > I do know that it works on 88E151x > > > > The 88E1318 and 88E1618 seems to be unknown. > > > >> I don't have other part's > >> datasheet to check. Datasheet is not so easily accessible. > > > > I suggest only to enable the parts you can confirm on hardware, > datasheet, or from the source code (where the page register is used). Then this code will be enabled at: 88E, 88E1145, and 88E151x (which I can test). > > York Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] net: phy: marvell: Add functions to read PHY's extended registers
On 10/27/2017 08:23 AM, Lukasz Majewski wrote: > On Fri, 27 Oct 2017 15:06:37 + > York Sun wrote: > >> On 10/27/2017 02:12 AM, Lukasz Majewski wrote: >>> This commit allows extended Marvell registers to be read with: >>> >>> foo > mdio rx FEC 3.10 >>> Reading from bus FEC >>> PHY at address 0: >>> 3.16 - 0x1063 >>> foo > mdio wx FEC 3.10 0x1011 >>> >>> The above code changes the way ETH connector LEDs blink. >>> >>> Signed-off-by: Lukasz Majewski >>> >>> --- >>> >>> Changes in v2: >>> - Provide the readext and writeext callbacks to other marvell ETH >>> PHY devices >>> >>> drivers/net/phy/marvell.c | 47 >>> +++ 1 file changed, 47 >>> insertions(+) >>> >>> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c >>> index b7f300e..19f451d 100644 >>> --- a/drivers/net/phy/marvell.c >>> +++ b/drivers/net/phy/marvell.c >>> @@ -104,6 +104,31 @@ >>> #define MIIM_88E151x_MODE_SGMII1 >>> #define MIIM_88E151x_RESET_OFFS15 >>> >>> +static int m88e1xxx_phy_extread(struct phy_device *phydev, int >>> addr, >>> + int devaddr, int regnum) >>> +{ >>> + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, >>> MII_MARVELL_PHY_PAGE); >>> + int val; >>> + >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, >>> devaddr); For register 30 and 31, the page register is 29, not 22. >>> + val = phy_read(phydev, MDIO_DEVAD_NONE, regnum); >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, >>> oldpage); + >>> + return val; >>> +} >>> + >>> +static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int >>> addr, >>> +int devaddr, int regnum, u16 val) >>> +{ >>> + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, >>> MII_MARVELL_PHY_PAGE); + >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, >>> devaddr); >>> + phy_write(phydev, MDIO_DEVAD_NONE, regnum, val); >>> + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, >>> oldpage); + >>> + return 0; >>> +} >>> + >>> /* Marvell 88E1011S */ >>> static int m88e1011s_config(struct phy_device *phydev) >>> { >>> @@ -599,6 +624,8 @@ static struct phy_driver M88E1011S_driver = { >>> .config = &m88e1011s_config, >>> .startup = &m88e1011s_startup, >>> .shutdown = &genphy_shutdown, >>> + .readext = &m88e1xxx_phy_extread, >>> + .writeext = &m88e1xxx_phy_extwrite, >>> }; >>> >> >> Lukasz, >> >> This seems wrong. 88E1011S doesn't have the page register. > > Ok. I will remove this one from v3. > >> I can only >> confirm 88E and 88E1145 have pages. > > I do know that it works on 88E151x > > The 88E1318 and 88E1618 seems to be unknown. > >> I don't have other part's >> datasheet to check. > I suggest only to enable the parts you can confirm on hardware, datasheet, or from the source code (where the page register is used). York ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] net: phy: marvell: Add functions to read PHY's extended registers
On Fri, 27 Oct 2017 15:06:37 + York Sun wrote: > On 10/27/2017 02:12 AM, Lukasz Majewski wrote: > > This commit allows extended Marvell registers to be read with: > > > > foo > mdio rx FEC 3.10 > > Reading from bus FEC > > PHY at address 0: > > 3.16 - 0x1063 > > foo > mdio wx FEC 3.10 0x1011 > > > > The above code changes the way ETH connector LEDs blink. > > > > Signed-off-by: Lukasz Majewski > > > > --- > > > > Changes in v2: > > - Provide the readext and writeext callbacks to other marvell ETH > > PHY devices > > > > drivers/net/phy/marvell.c | 47 > > +++ 1 file changed, 47 > > insertions(+) > > > > diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c > > index b7f300e..19f451d 100644 > > --- a/drivers/net/phy/marvell.c > > +++ b/drivers/net/phy/marvell.c > > @@ -104,6 +104,31 @@ > > #define MIIM_88E151x_MODE_SGMII1 > > #define MIIM_88E151x_RESET_OFFS15 > > > > +static int m88e1xxx_phy_extread(struct phy_device *phydev, int > > addr, > > + int devaddr, int regnum) > > +{ > > + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, > > MII_MARVELL_PHY_PAGE); > > + int val; > > + > > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > > devaddr); > > + val = phy_read(phydev, MDIO_DEVAD_NONE, regnum); > > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > > oldpage); + > > + return val; > > +} > > + > > +static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int > > addr, > > +int devaddr, int regnum, u16 val) > > +{ > > + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, > > MII_MARVELL_PHY_PAGE); + > > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > > devaddr); > > + phy_write(phydev, MDIO_DEVAD_NONE, regnum, val); > > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, > > oldpage); + > > + return 0; > > +} > > + > > /* Marvell 88E1011S */ > > static int m88e1011s_config(struct phy_device *phydev) > > { > > @@ -599,6 +624,8 @@ static struct phy_driver M88E1011S_driver = { > > .config = &m88e1011s_config, > > .startup = &m88e1011s_startup, > > .shutdown = &genphy_shutdown, > > + .readext = &m88e1xxx_phy_extread, > > + .writeext = &m88e1xxx_phy_extwrite, > > }; > > > > Lukasz, > > This seems wrong. 88E1011S doesn't have the page register. Ok. I will remove this one from v3. > I can only > confirm 88E and 88E1145 have pages. I do know that it works on 88E151x The 88E1318 and 88E1618 seems to be unknown. >I don't have other part's > datasheet to check. > > York Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] net: phy: marvell: Add functions to read PHY's extended registers
On 10/27/2017 02:12 AM, Lukasz Majewski wrote: > This commit allows extended Marvell registers to be read with: > > foo > mdio rx FEC 3.10 > Reading from bus FEC > PHY at address 0: > 3.16 - 0x1063 > foo > mdio wx FEC 3.10 0x1011 > > The above code changes the way ETH connector LEDs blink. > > Signed-off-by: Lukasz Majewski > > --- > > Changes in v2: > - Provide the readext and writeext callbacks to other marvell ETH PHY > devices > > drivers/net/phy/marvell.c | 47 > +++ > 1 file changed, 47 insertions(+) > > diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c > index b7f300e..19f451d 100644 > --- a/drivers/net/phy/marvell.c > +++ b/drivers/net/phy/marvell.c > @@ -104,6 +104,31 @@ > #define MIIM_88E151x_MODE_SGMII 1 > #define MIIM_88E151x_RESET_OFFS 15 > > +static int m88e1xxx_phy_extread(struct phy_device *phydev, int addr, > + int devaddr, int regnum) > +{ > + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE); > + int val; > + > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr); > + val = phy_read(phydev, MDIO_DEVAD_NONE, regnum); > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage); > + > + return val; > +} > + > +static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int addr, > + int devaddr, int regnum, u16 val) > +{ > + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE); > + > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr); > + phy_write(phydev, MDIO_DEVAD_NONE, regnum, val); > + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage); > + > + return 0; > +} > + > /* Marvell 88E1011S */ > static int m88e1011s_config(struct phy_device *phydev) > { > @@ -599,6 +624,8 @@ static struct phy_driver M88E1011S_driver = { > .config = &m88e1011s_config, > .startup = &m88e1011s_startup, > .shutdown = &genphy_shutdown, > + .readext = &m88e1xxx_phy_extread, > + .writeext = &m88e1xxx_phy_extwrite, > }; > Lukasz, This seems wrong. 88E1011S doesn't have the page register. I can only confirm 88E and 88E1145 have pages. I don't have other part's datasheet to check. York ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
[U-Boot] [PATCH v2] net: phy: marvell: Add functions to read PHY's extended registers
This commit allows extended Marvell registers to be read with: foo > mdio rx FEC 3.10 Reading from bus FEC PHY at address 0: 3.16 - 0x1063 foo > mdio wx FEC 3.10 0x1011 The above code changes the way ETH connector LEDs blink. Signed-off-by: Lukasz Majewski --- Changes in v2: - Provide the readext and writeext callbacks to other marvell ETH PHY devices drivers/net/phy/marvell.c | 47 +++ 1 file changed, 47 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index b7f300e..19f451d 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -104,6 +104,31 @@ #define MIIM_88E151x_MODE_SGMII1 #define MIIM_88E151x_RESET_OFFS15 +static int m88e1xxx_phy_extread(struct phy_device *phydev, int addr, + int devaddr, int regnum) +{ + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE); + int val; + + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr); + val = phy_read(phydev, MDIO_DEVAD_NONE, regnum); + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage); + + return val; +} + +static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int addr, +int devaddr, int regnum, u16 val) +{ + int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE); + + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr); + phy_write(phydev, MDIO_DEVAD_NONE, regnum, val); + phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage); + + return 0; +} + /* Marvell 88E1011S */ static int m88e1011s_config(struct phy_device *phydev) { @@ -599,6 +624,8 @@ static struct phy_driver M88E1011S_driver = { .config = &m88e1011s_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88ES_driver = { @@ -609,6 +636,8 @@ static struct phy_driver M88ES_driver = { .config = &m88es_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1118_driver = { @@ -619,6 +648,8 @@ static struct phy_driver M88E1118_driver = { .config = &m88e1118_config, .startup = &m88e1118_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1118R_driver = { @@ -629,6 +660,8 @@ static struct phy_driver M88E1118R_driver = { .config = &m88e1118_config, .startup = &m88e1118_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1121R_driver = { @@ -639,6 +672,8 @@ static struct phy_driver M88E1121R_driver = { .config = &m88e1121_config, .startup = &genphy_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1145_driver = { @@ -649,6 +684,8 @@ static struct phy_driver M88E1145_driver = { .config = &m88e1145_config, .startup = &m88e1145_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1149S_driver = { @@ -659,6 +696,8 @@ static struct phy_driver M88E1149S_driver = { .config = &m88e1149_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1510_driver = { @@ -669,6 +708,8 @@ static struct phy_driver M88E1510_driver = { .config = &m88e1510_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; /* @@ -684,6 +725,8 @@ static struct phy_driver M88E1518_driver = { .config = &m88e1518_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1310_driver = { @@ -694,6 +737,8 @@ static struct phy_driver M88E1310_driver = { .config = &m88e1310_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, + .readext = &m88e1xxx_phy_extread, + .writeext = &m88e1xxx_phy_extwrite, }; static struct phy_driver M88E1680_driver = { @@ -704,6 +749,8 @@ static struct phy_driver M88E1680_driver = { .config = &m88e1680_config, .startu