These are currently not quite in alphabetical order. Before adding more,
sort them.
Signed-off-by: Simon Glass
Suggested-by: Bin Meng
---
Changes in v2:
- Add new patch to sort the device-access commands
cmd/Kconfig | 244 ++--
1 file changed, 122 insertions(+), 122 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index f18efc1e88..d9a35b81a7 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -483,6 +483,12 @@ endmenu
menu "Device access commands"
+config CMD_ARMFLASH
+ #depends on FLASH_CFI_DRIVER
+ bool "armflash"
+ help
+ ARM Ltd reference designs flash partition access
+
config CMD_CLK
bool "clk - Show clock frequencies"
help
@@ -492,6 +498,25 @@ config CMD_CLK
clock values from associated drivers. However currently no command
exists for this.
+config CMD_DEMO
+ bool "demo - Demonstration commands for driver model"
+ depends on DM
+ help
+ Provides a 'demo' command which can be used to play around with
+ driver model. To use this properly you will need to enable one or
+ both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+ Otherwise you will always get an empty list of devices. The demo
+ devices are defined in the sandbox device tree, so the easiest
+ option is to use sandbox and pass the -d point to sandbox's
+ u-boot.dtb file.
+
+config CMD_DFU
+ bool "dfu"
+ select USB_FUNCTION_DFU
+ help
+ Enables the command "dfu" which is used to have U-Boot create a DFU
+ class device via USB.
+
config CMD_DM
bool "dm - Access to driver model information"
depends on DM
@@ -503,17 +528,80 @@ config CMD_DM
can be useful to see the state of driver model for debugging or
interest.
-config CMD_DEMO
- bool "demo - Demonstration commands for driver model"
- depends on DM
+config CMD_FDC
+ bool "fdcboot - Boot from floppy device"
help
- Provides a 'demo' command which can be used to play around with
- driver model. To use this properly you will need to enable one or
- both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
- Otherwise you will always get an empty list of devices. The demo
- devices are defined in the sandbox device tree, so the easiest
- option is to use sandbox and pass the -d point to sandbox's
- u-boot.dtb file.
+ The 'fdtboot' command allows booting an image from a floppy disk.
+
+config CMD_FLASH
+ bool "flinfo, erase, protect"
+ default y
+ help
+ NOR flash support.
+ flinfo - print FLASH memory information
+ erase - FLASH memory
+ protect - enable or disable FLASH write protection
+
+config CMD_FPGA
+ bool "fpga"
+ default y
+ help
+ FPGA support.
+
+config CMD_FPGA_LOADBP
+ bool "fpga loadbp - load partial bitstream (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGA_LOADFS
+ bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+ bool "fpga loadmk - load bitstream from image"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+ bool "fpga loadp - load partial bitstream"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGAD
+ bool "fpgad - dump FPGA registers"
+ help
+ (legacy, needs conversion to driver model)
+ Provides a way to dump FPGA registers by calling the board-specific
+ fpga_get_reg() function. This functions similarly to the 'md'
+ command.
+
+config CMD_FUSE
+ bool "fuse - support for the fuse subssystem"
+ help
+ (deprecated - needs conversion to driver model)
+ This allows reading, sensing, programming or overriding fuses
+ which control the behaviour of the device. The command uses the
+ fuse_...() API.
+
+config CMD_GPIO
+ bool "gpio"
+ help
+ GPIO support.
+
+config CMD_GPT
+ bool "GPT (GUID Partition Table) command"
+ select PARTITION_UUIDS
+ select EFI_PARTITION
+ help
+ Enable the 'gpt' command to ready and write GPT style partition
+ tables.
config CMD_IDE
bool "ide - Support for IDE drivers"
@@ -566,6 +654,11 @@ config CMD_IOTRACE
might be useful to enhance tracing to only checksum the accesses and
not the data read/written.
+config CMD_