[U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work
This is regression of commit 2035d77d i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework Before commit 2035d77d, i2c probe command works properly on kzm9g board. KZM-A9-GT# i2c probe Valid chip addresses: 0C 12 1D 32 39 3D 40 60 After commit 2035d77d, i2c probe command does not work. KZM-A9-GT# i2c probe Valid chip addresses: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F sh_i2c_probe() calls sh_i2c_read(), but read length is 0. So acutally it does not read device at all. This patch changes read length to 1. Signed-off-by: Tetsuyuki Kobayashi --- drivers/i2c/sh_i2c.c |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index cc19100..264c2e6 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -269,7 +269,7 @@ static int sh_i2c_write(struct i2c_adapter *adap, uint8_t chip, uint addr, static int sh_i2c_probe(struct i2c_adapter *adap, u8 dev) { - return sh_i2c_read(adap, dev, 0, 0, NULL, 0); + return sh_i2c_read(adap, dev, 0, 0, NULL, 1); } static unsigned int sh_i2c_set_bus_speed(struct i2c_adapter *adap, -- 1.7.9.5 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work
Hello Tetsuyuki Am 14.04.2014 06:45, schrieb Tetsuyuki Kobayashi: This is regression of commit 2035d77d i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework Before commit 2035d77d, i2c probe command works properly on kzm9g board. KZM-A9-GT# i2c probe Valid chip addresses: 0C 12 1D 32 39 3D 40 60 After commit 2035d77d, i2c probe command does not work. KZM-A9-GT# i2c probe Valid chip addresses: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F sh_i2c_probe() calls sh_i2c_read(), but read length is 0. So acutally it does not read device at all. This patch changes read length to 1. Signed-off-by: Tetsuyuki Kobayashi --- drivers/i2c/sh_i2c.c |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) I could not find your patch in patchwork ... so I think it go through u-boot-sh.git, so: Acked-by: Heiko Schocher Thanks! bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work
Hi, 2014-04-14 14:22 GMT+09:00 Heiko Schocher : > Hello Tetsuyuki > > Am 14.04.2014 06:45, schrieb Tetsuyuki Kobayashi: > >> This is regression of commit 2035d77d i2c: sh_i2c: Update to new >> CONFIG_SYS_I2C framework >> >> Before commit 2035d77d, i2c probe command works properly on kzm9g board. >> >> KZM-A9-GT# i2c probe >> Valid chip addresses: 0C 12 1D 32 39 3D 40 60 >> >> After commit 2035d77d, i2c probe command does not work. >> >> KZM-A9-GT# i2c probe >> Valid chip addresses: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 >> 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 >> 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 >> 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B >> 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 >> 75 76 77 78 79 7A 7B 7C 7D 7E 7F >> >> sh_i2c_probe() calls sh_i2c_read(), but read length is 0. So acutally it >> does not read device at all. This patch changes read length to 1. >> >> Signed-off-by: Tetsuyuki Kobayashi >> --- >> drivers/i2c/sh_i2c.c |2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) > > > I could not find your patch in patchwork ... so I think > it go through u-boot-sh.git, so: > > Acked-by: Heiko Schocher > Thanks! I think the reason that is not registered in the patchwork, the subject is because he is 0/2. Tetsuyuki, could you re-send this patch? > Thanks! > > bye, > Heiko > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Best regards, Nobuhiro -- Nobuhiro Iwamatsu iwamatsu at {nigauri.org / debian.org} GPG ID: 40AD1FA6 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH v2 1/2] i2c: sh_i2c: bugfix: i2c probe command does not work
Hello, Nobihiro, Heiko I found bug in this patch. When I change read length 0 to 1, I have to change buffer address NULL to some valid memory address. I am going to v3 patch as soon as possible. (2014/04/14 15:09), Nobuhiro Iwamatsu wrote: Hi, 2014-04-14 14:22 GMT+09:00 Heiko Schocher : Hello Tetsuyuki Am 14.04.2014 06:45, schrieb Tetsuyuki Kobayashi: This is regression of commit 2035d77d i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework Before commit 2035d77d, i2c probe command works properly on kzm9g board. KZM-A9-GT# i2c probe Valid chip addresses: 0C 12 1D 32 39 3D 40 60 After commit 2035d77d, i2c probe command does not work. KZM-A9-GT# i2c probe Valid chip addresses: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F sh_i2c_probe() calls sh_i2c_read(), but read length is 0. So acutally it does not read device at all. This patch changes read length to 1. Signed-off-by: Tetsuyuki Kobayashi --- drivers/i2c/sh_i2c.c |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) I could not find your patch in patchwork ... so I think it go through u-boot-sh.git, so: Acked-by: Heiko Schocher Thanks! I think the reason that is not registered in the patchwork, the subject is because he is 0/2. Tetsuyuki, could you re-send this patch? Thanks! bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Best regards, Nobuhiro ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot